Hard drive not recognized when trying to install windows

Compaq nx6320 laptop does not see the hard drive. HD is good outside the laptop. The HD is seen by CDROM disk utilities.

Hi,
Please read the following topic:
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=168595
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

External Hard Drive Not recognized when trying to boot from it.

So I am trying to boot from my external hard drive through firewire but my computer doesn't seem to recognize the external. There is some problem with my Macbook not booting up correctly and I want to backup my data before reinstalling Tiger. They did this at the Apple store and ran disk utility on it my Macbooks hard drive. I could access all my data, but now when I get home and plug in my hard drive, hold down option after booting, the only drive that pops up is the Mac HD. I read somewhere to try partitioning the external drive as Mac Journaled and I did so with my working Macbook Pro. Any ideas whats going on?

Well i got most of my information off the old one, now I am trying to reinstall Tiger to the MacBook. Problem is I initially tried to do an archive install and the install kept failing after the second disc when it asked for the second install disc.
The people at the Apple store suggested that I try to do a wipe of the hard drive and install. Now when I put in the Disc 1 install disc and boot from the cd drive it just sits for a while and then ejects disc 1 and goes back to the place where the install failed from before ie: it keeps asking for the second install disc.
I can't figure out a way to get around this and just do a clean install on the machine. Any thoughts would be great.

Hard Drive not recognized when booting from XP CD on docking station

The hard drive on my X60 failed to the point where I couldn't recover and reinstall the image. I have backups of all my data and a docking station so I didn't sweat it. Bought a new drive and installed it and this is when the trouble began.
I created an XP CD with SP2 slipstreamed in to make sure I have the latest drivers. I boot from XP CD and everything works until I try to install Windows. According to the installation CD there is no drive installed!
I reinstalled the drive to make sure and this time I booted off of Ubuntu Linux which installed flawlessly. That leads me to believe that there is a driver problem with Windows.
I need help! I would like to install Windows on the machine but nothing I've tried works.

edgardo wrote:
According to the installation CD there is no drive installed!
Standard Microsoft XP SP2 does not come with any SATA device drivers.
You have two options:
Go into the T60 BIOS and switch the SATA controller mode away from AHCI to "IDE" mode (or pehaps its "legacy" or "compatibility" mode - I forget what specific term is used in a ThinkPad BIOS).
Find the SATA device driver for XP (it's probably in the Intel Chipset driver download) on the Lenovo X60 support web site, download it and install it using the additional driver installation option which is offered right at the start of an XP install.
If you chose option 1, remember to switch the SATA controller back to AHCI mode in the BIOS after you have installed the SATA device driver.
Cheers,
Bill
Message Edited by billbolton on 03-09-2008 02:11 PM
I don't work for Lenovo

Hard drive not recognized when connected to Apple keyboard

Hi there,
I'm using a dock (Henge) for my MacBook Pro with a wired Apple keyboard to which I connect a Passport hard drive using the USB port (my Time Machine backup). The hard drive is self powered but still it won't be recognized by the Macbook Pro. I have used the USB port to connect my iPhone without any issue.
Any ideas? Should I use a USB power booster?
Thanks
CB

The USB ports in the Apple keyboard are NOT powered, so your passport HD will not work on it because it pulls too much power from the USB port.
More info here: http://support.apple.com/kb/HT4049

HT1923 did anyone get the apple application support was not found when trying to instal?

I am having trouble instaling itunes. has anyone got the apple application support was not found when trying to instal itunes? it looks like it is not installing all of files to my computer and it can not reach a certain folder

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Hard drive not recognized during windows server 2008 setup

hard drive not recognized during windows server 2008 setup

Hi,
Whether the hard disk is recognized in BIOS?
Connect it to another computer to see if it could be recognzied incase the cause is the disk itself. Also please check if it is really a RAID instead of a single hard disk - a single disk should be recognized directly while RAID cannot be recognized until
a suitable driver is installed.
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

[SOLVED]Hard Disk not recognized when installing

Hey all, I'm just starting with Arch and I've had some trouble installing it on my Acer netbook.
My first installation went well except that I had forgot to download the wireless tools so I decided to do a fresh install as I had no access to a wired connection at the time. The second installation attempt must have had some error on my part as Arch failed to start after selecting it from Grub, saying that the kernel was not available/not recognized.
Now my subsequent attempts at installing have failed because the hard disk is not recognized when running either cgdisk or cfdisk. Instead of showing my hard drive partitions after running
cfdisk /dev/sda
it shows my usb drive. If I instead use
cgdisk /dev/sda
it displays an error saying that the disk is damaged or not recognized. When I first saw this I thought my disk was failing, so I tried #! to see if it would show the same error, but it was able to recognize the entire disk and install correctly. Now, even after having the entire disk formatted as ext4 with #! installed, cgdisk is still giving me the same error about a damaged disk.
Am I doing something incorrectly or is there a fix for this? I haven't been able to find any information about this after a good while of searching.
Thanks for your help.
Last edited by Forest_Leaves (2013-03-05 08:30:24)

srs5694 wrote:The cgdisk "damaged disk" error is probably a result of the tool seeing an MBR partition table on your USB flash drive, rather than the GPT disk it's expecting. If I'm right, you should not follow s1ln7m4s7r's advice, since that will simply trash your USB flash drive!
If you mean by trashing the USB flash drive, that it will delete all data and partitions on the selected drive it is correct, because:
dd if=/dev/zero of=/dev/$disk bs=4096 count=1
- this will delete all partition-table data
sgdisk -o /dev/$disk
- this will clear out all data. This includes GPT header data, all partition definitions, and the protective MBR.
/dev/$disk
- this will make you enter ncurses-based GUID partition table (GPT) manipulator, where you can create new partitions
You should only do this if you are certain of what disk it is.
Now if when you said this, you were meaning it will became broken, then it may be a special kind of usb drive because i've donne it many times and i've not broken any.
srs5694 wrote:My guess is that either your hard disk has become /dev/sdb (this can happen in some cases; disk identifiers aren't really fixed) or you're missing a driver for your hard disk controller because you've booted a different kernel or a different initrd file. Another possibility is that there's a hardware fault -- probably a loose cable -- that's preventing the kernel from seeing the disk.
If the usb drive is not where you installed arch, then you need to find if there are more recognized drives:
lsblk | grep disk
And see the uuid of the root partition you want, and add it to your bootloader boot line:
blkid /dev/sdxx
Last edited by s1ln7m4s7r (2013-03-04 19:17:36)

Internal Optical Drive not recognized after trying to Bootcamp

Around 3 months ago I tried boot camping my Macbook with Windows 7 but it ended up freezing and I had to restart my computer. When the computer had fully restarted I found that a few things had changed. First, I now had a 70 GB partition called BOOTCAMP but it was basically unusable since the Windows 7 OS was never installed in the partition, and second the Optical Drive wasn't recognized by my computer anymore so it won't work at all and the Windows 7 CD is now stuck in there.
I tried a lot of different ways that I found on the internet to try to eject the CD but nothing has worked. It's not really a huge deal since CDs are starting to become the new floppy disks but it would still be nice to have this working again.
Also, here's the original post that I made back in December. It never got any replies and somehow got moved but I was never able to see where it got moved because whenever I clicked "discussion" in "Branched to a new discussion." I would get a page that said this - "Unauthorized. Access to this place or content is restricted. If you think this is a mistake, please contact your administrator or the person who directed you here." I know the whole post is pretty long so I have a TLDR; at the end of it and I pretty much summarized the problem again at the top of this whole post.
Alright so earlier today I decided to Bootcamp my Macbook and install Windows 7 with a 70GB partition. I was using https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2 and http://www.howtogeek.com/186907/how-to-install-windows-on-a-mac-with-boot-camp/ to help guide me through the process. Everything was running smoothly at first...I had a 32GB memory stick that I used to load the support software onto and I had a Windows 7 Ultimate 64-bit DVD in my disk drive.
The first problem I ran into was when Bootcamp wanted to download the files onto the memory stick - it wanted me to format the stick. So I went into Disk Utility, clicked on it, went to erase, then formatted it to the same format it was (because it was already FAT) and then it all worked. After getting the support software onto the memory stick the next step was to partition my disk. After doing a TON of research I finally decided that 70GB would be enough for the OS, a game or two, Sony Vegas Pro, and a few small programs. So I dragged the thing to give the new partition 70 GB and pressed install.
Then, the next problem occurred - a message popped up saying "The USB drive connected to this Mac contains a bootable volume. In order to install Windows 7 from the DVD, the Boot Camp Assistant needs to disable this functionality. No information on the drive will be removed, do you want to continue?" I was hesitant at this point to do anything so I googled it and couldn't find much except this thread - Bootable volume on USB flash drive in boot camp. I decided to try it and press continue since according to the thread it would stop me if there was a problem. Once I did I THINK (I can't remember that it did for sure or not) it dismounted the memory stick, which I remember thinking was okay because I could just unplug it and plug it back in after Windows 7 was installed to install the support software (Also, I NEVER removed the memory stick until after a reboot later on). After that Bootcamp began partitioning my hard drive.
About an hour later the blue progress bar had actually filled up to at least 99% (but it looked like 100% to me) but Bootcamp still said "Status: Partitioning Disk" so I left it alone for another 1-2 hours. After that I started getting worried and googled how long this process was supposed to take and found out that this step normally only took a few minutes for most people. At this point I started looking up fixes for this but nothing matched my problem since Bootcamp itself wasn't actually frozen (when I clicked and held on the icon it didn't say "Application not responding") so I decided to check to see if the partition had worked. Then, Disk Utility froze like a few seconds after opening it up so I had to force quit that. My next option was to check under "Storage" in "About this mac" so I tried that and it froze as well. While all this was going on I kept checking back to Bootcamp and it never froze.
Now I was getting extremely worried and with no solutions on Google and no idea what to do I decided to just try and restart my computer and pray to god that it would reboot fine. Luckily, it did...for the most part. After rebooting all my applications seemed to be working fine (I can confirm that Terminal, Disk Utility, System Preferences, System Information, and Safari are all working or at least loading). I also had all my files still on my computer so that was good. Next, I checked Disk Utility to see if the partition had actually worked and it did, or at least it is showing up as "BOOTCAMP" under my main hard drive. Then, I tried using Bootcamp again and this is when I noticed something new - a warning on Bootcamp's first page that wasn't there before, "You need an optical drive to install Windows. Connect an optical drive to your computer. You cannot install Windows with a remote optical drive." I can't guarantee that it wasn't there the first time but I really don't remember it there. After reading that I checked my Desktop for the mounted Windows 7 Ultimate 64-bit DVD and it wasn't there. Then, I checked Disk Utility and it wasn't showing up there either. The only things I can see on Disk Utility are my main hard drive with both partitions, my memory stick, and a random dmg file called decryptedFile.dmg (the size of this file is only 15.6mb so I don't think it could be the OS DVD).
So now I am trying to figure out how to get my computer to recognize that it does have an internal optical drive and that there is a DVD inside of it. I looked around on Google to try to find answers but all the regular options to fix this don't work since the computer itself is not realizing it's there. I don't know if this helps to prove that it doesn't realize this but I checked in System Information -> Hardware -> Disk Burning and it says "No disk burning device was found. If the device is external, make sure it's connected and turned on." And since a "Superdrive" can read disks I'm assuming it can burn them to and would be shown under that. (I don't know that much about computers though so I could easily be wrong)
Anyways, sorry for the extreme detail that I went into but I wanted to get as much information about what happened as I possibly could. For those of you who don't have time to read all that I'll put a little summary.
TLDR; Basically, I tried to Bootcamp my Macbook to run Windows 7 Ultimate 64-bit. I ran into a few problems and then Bootcamp wouldn't move on from "Status: Partitioning Disk" so I had to restart my computer. After the restart my Macbook doesn't recognize that it has an internal Superdrive and therefore doesn't realize that there's a Windows 7 Ultimate DVD disk in it. I looked around for answers but none of the simple ones (using key commands on the keyboard and typing something into terminal) worked. Now I'm looking for help to get my computer to realize that it does have a Superdrive inside so I can get the disk out.
Thanks in advanced! If any more information is required to help please let me know so I can find it. Also, this is a Mid-2010 White Unibody Macbook.

Hello Michael Dixon2,
Thanks for using Apple Support Communities.
In order to troubleshoot this issue where the optical drive does not accept discs, please follow the steps below.
Doesn't accept discs
Be sure to check your disc to make sure it is flat. You can check this by putting the disc upside-down on a flat surface. If the disc is bowed up on any side or in the center, do not use the disc because it might get stuck in the drive. Do not use discs that have anything attached to them or dangling from them (such as "sweeper" or cleaning discs).
If the drive struggles when you put in a disc or stops part-way, carefully look at the disc for labels that may be interfering. If there aren't any raised labels then try putting the disc in a few more times.
Try another disc to see if the issue is being caused by a specific disc.
Make sure you insert the disc far enough for the drive mechanism to activate. You need to insert discs nearly all the way before the drive will activate and pull them in. If you don't completely insert a disc, the drive will reverse and push the disc back out.
Allow the drive one or two seconds to accept the disc while it is fully inserted.
Reset the System Management Controller (SMC).
If the drive repeatedly does not accept discs, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
Apple Computers: Troubleshooting the slot-loading SuperDrive - Apple Support
Cheers,
Alex H.

Advanced Format Hard Drive not recognized by HP DV6000 Controller

Hello,
I have an HP DV 6000 laptop (6276 I think, I'm at work can't check) that came preinstalled with a Western Digital 160gb 1.5gb/s 5400 RPM drive (Vista) that failed a couple of weeks ago. So i bought a Western Digital 750 GB WD Black SATA III 7200 RPM 16 MB drive to replace it. I read about people having some problems with Advanced Drive Format hard drives not being recognized by their controller, but also read that depending on the controller and specific Dv6000 model laptop they had-one wouldn't run into problems.
Well sure enough, when attempting to install Windows 7 I received the error that the hard drive was not detected. After researching online I came across an article on WD's site that noted
"Our SATA II hard drives use autospeed negotiation. This enables our SATA II drives to automatically detect the motherboard data transfer rate, making it backward compatible with SATA I data transfer rates. However, some older SATA I controllers are unable to support autospeed negotiation and cannot recognize the drive. This “drive not detected” condition occurs when a chipset is incapable of correctly negotiating the data transfer speed with a SATA II hard drive."
my drive is a SATA ||| but I'm pretty sure it's the same problem. The site goes on to say a fix would be to "purchase and install a third party PCI or PCI-Express Second Generation Serial ATA controller card for your Serial ATA hard drive(s)."
My question(s) are.
1)Is the problem that I am trying to install a Sata ||| hard drive on a laptop with a controller that will only recognize SATA | hard drive?
2) Or is the problem that the hard drive is an Advanced Drive Formatted hard drive and I need to buy a hard drive with out that specification?
3) Or Should I buy a SATA controller card as WD suggests on their website and if so will this definitely allow my laptop's controller to recognize the new hard drive and proceed with the installation?
4)Or Should I just return the hard drive and buy a SATA | non Advanced Drive Format hard drive? (question 2 basically)
Thanks for your help!

Hi @jasmine00
Welcome to the HP Support Forums.
I certainly understand your issue with the drive upgrade. Unfortunately it is a bit of the nature of notebooks, the sacrifice of a large amount of upgradeability, in exchange for compactness and portability. Whenever a new technology comes out, older notebooks are never really going to be easy to upgrade, it at all. Normally the unit as a whole is tested with a set list of hardware, and only those items are supported.
That being said there is this document that could be helpful with your problem.
Preparing Advanced Format hard drives for Microsoft Windows installations on HP Business Notebook PC...
And for your reference:
HP Pavilion dv6000 Notebook PC Maintenance and Service Guide
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

External hard drive not recognized in imovie 09 - ! - in a yellow triangle

i'm new to imovie and want to save space on my hard drive by saving files in an external drive
- i'm only able to import to the computer hard drive... not to the external hard drive.
- i can archive video files from the cam to the my external hard drive (500gig passport)
- when i go to import to the the same external drive... the drive is not available in the +"save to"+ drop down menu...only the computer hard drive.
- the external drive shows up in the +"event library"+ window, however it has an +"exclamation point ! in a yellow triangle"+
help!

The external drive must be formatted as Mac OS Extended (journaled). If you drive is currently formatted as FAT32, you can re-format it using Disk Utility in your Applications/Utilities folder.
If you have any current data on the external drive, be sure to back it up before formatting. A format will erase all data that is currently there.
To reformat the drive, open Disk Utility and select the drive. First Partition the drive using GUID (if you have an intel mac, or using Apple Partition Map (if you have some old Power PC macs that will need to access this drive). A single partition is OK.
Then reformat this partition as MacOS Extended (journaled).

Adobe Captivate does not start when trying to install after download.

Downloaded Adobe Captivate 7 but when trying to install it does not do anything.

Hi dimitri2014,
The downloaded Captivate files has 2 parts - One with .7z extension and the other with .exe extension.
Please run the .exe file to initiate the installation.
Alternatively can try re-downloading both the files from the direct download links available at : http://prodesigntools.com/adobe-captivate-7-free-trial-direct-download -links.html
Please make sure you follow the important steps mentioned on the page before initiating the download.

Iphone will not backup, when trying to install latest software

For some reason, it appears, that the phone will not backup, while trying to install latest software. PC, is running windows 7. Anyone out there have the same problem ?

solved - repair disk permissions using disk utility...
thanks.

Error 0x80300024 when trying to install Windows Ultimate 32 bit on a T60

I have been trying to install Windows Ultimate 32 bit on a T60 with a 128GB Solid state hard drive and I keep getting the error "Windows cant install to the current location Error code 0x80300024" I have formatted the drive in another PC, created the bit locker partition, but still windows says it is "unallocated space" Can anyone help please
Moderator note: OS corrected in subject line

Says "A problem occurred while extracting the archive. Please try downloading the Photoshop Lightroom 5.7.1 installer again".
Thanks!

Please I was format my mac OS x when trying to install windows on my mac air can any one help me showing the way to reinstall mac OS

please, when I trying to install windows on my mac air I do a mistake by choosing a partition that mac OS installed, so I format MAC OS and install windows instead
I want to know the way to reinstall mac OS please.

hold down option while booting up and you should be able to select the empty drive and reinstall Mac OS on it

I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I am using windows 7 professional install disc. I can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
"P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

Hard drive not recognized when trying to install windows

Similar Messages

Maybe you are looking for