Hard Drive Partitions and Factory Reset

Hello,
I bought my HP Pavilion g-series and I used it for a while, then I decided to install Ubuntu as well as I want to do some programming. I partitioned my Harddrive and I made a mistake, and the Harddrive is now labelled as "Simple Volume".
I want to change the Partitions back to "Primary Partions". I tried to do a sytem recovery from the HP recovery partition, but the option is deactivated.
Also, I want to partition my Hard drive into so that I will have 100GB reserved for Windows 7 and the remaining 650GB for my files and documents so that I can access them from my Ubuntu as well.
If there is a way to change the Partitions back to Primary Partitions and also to safely partion it again, I will be relieved to hear it and implement it.
Thank you
This question was solved.
View Solution.

Dan has a guide on partitioning the hdd. The short of it is that you have 4 primary partitions from the factory and must decide which to do without in order to have an extra partition. He recommends to use the "System" partition for your extra partitioning scheme.
How to repartition HDD of HP notebook with pre-installed Win...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

Trying to clean install Mavericks but hard drive partitioned and won't allow

My MacBook Pro 2012 was set up with a partitioned hard drive. Now, as I upgrade from 10.8 to Mavericks, I'd like ot use the Disk Utility to erase the hard drive and then use the interface to install Mavericks, but it won't let me erase the hard drive.
On the left side of the Disk Utility, below the main hard drive, there are two drives noted, with the OS and something else.
Can you suggest how to do something here? I'm stuck halfway.

I'm not sure what you are doing, but if the Recovery HD is still there:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

Macbook Pro Hard drive partition and Bootcamp Info.plist

Okays, so i was planning on installing windows through USB bootcamp as my CD is broken. I tried editing the Info.Plist and i managed to stuff it up and lost original now it doesnt work, how do i redownload my original one.
THEN i tried to partition the hard drive with disk utility, i accidentally didnt resize each partition and force quit the app and now my hard drive shows 249.56 GB FULL instead of 129.45 full, what do i do to fix my hard drive. in the "about this mac" it shows half my hard drive used as "Other". Please help
Its a Macbook pro 2010 13inch
running 10.9 Maverick

Hi Michele,
Sounds like a corrupted partition map. Can you run the Bootcamp Setup Assistant again to restore the drive to a single volume? Otherwise, I'd backup the OS X side and then re-partition the drive and start from scratch, then restore your backup so at least you'll be back up and operational on the OS X relatively quickly.

Maxtor hard drive: Partitions and erasing?

I have a Maxtor hard drive that is currently partitioned 1/2 for Mac and 1/2 for windows.......i just got a new mac so i don't need the windows 1/2 anymore. Can I erase everything from the windows 1/2 and reformat it for mac without deleting any of the data stored on the mac 1/2???
It does say in disk utility that it will erase all the data on the particular volume (which would be the windows formatted one?)
i don't want to lose anything that's on the mac partition of the hard drive.
thanks!
zack

Erasing one partition of a hard disk won't affect anything on the other partitions.
(18210)

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
See http://www.alsoft.com/diskwarrior/

Trying to restore my Mac OS after a hard drive failure and my password is no longer recognized, however I can log in by double clicking on the Lion Icon? How can I reset my password

I am trying to restore my Mac OS after a hard drive failure and my password is no longer recognized, however I can log in by double clicking on the Lion Icon? How can I reset my password

First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combinationcommand-space or command-option-space. See this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I ha

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Can I install Mac OS X 10.5 on a Powerbook G4 already running Mac OS X 10.6? I lost my disc of 10.6 and can only find my 10.5 disc as I'm selling my MacBook and wiping the hard drive for a complete reset.

Can I install Mac OS X 10.5 on a Powerbook G4 already running Mac OS X 10.6? I lost my disc of 10.6 and can only find my 10.5 disc as I'm selling my MacBook, and wiping the hard drive for a complete reset.

A PowerBook G4 can't run Snow Leopard OS 10.6, however, it can run Leopard OS 10.5. But you must use a retail (black) Leopard install DVD.
What does the selling of your MacBook have to do with installing Leopard on your PowerBook?
 Cheers, Tom

I have OSX 10.6.6 MacBook Pro (Snow Leopard) and i am trying to format my whole hard drive (back to factory settings) from the original CD. Can someone please give instructions?

I have an OS X 10.6.6 MacBook Pro (Snow Leopard) and i am trying to format my whole hard drive (back to factory settings) from the original CD.
Can someone please give instructions?

Welcome to the Apple Support Communities
To restore the MacBook Pro to factory settings:
1. Make a backup of your files because everything will be erased.
2. Insert the Snow Leopard disc and press the C key while your Mac is starting to start from the DVD.
3. Go to Utilities menu > Disk Utility, select Macintosh HD on the sidebar, go to Erase tab and erase the disk.
4. Close Disk Utility and install Mac OS X

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

MacBook will not start. I have restarted with original CD. I have used Utilities and "no problem" with hard drive. I have reset PRAM. I have tried safe boot. Nothing is work. Gray screen with Apple logo and rotating wheel. Thanks for any suggestions!

Snow Leopard is a Mac OS X version. You say that it's the version you have in your Mac (10.6.8). Do a back up of your files, format the hard drive (using Disk Utility) and reinstall again

Why can't i use realplayer with my mac anymore? it worked fine until i had the hard drive erased and reset

why can't i use realplayer with my mac anymore? it worked fine until i had the hard drive erased and reset

Did you remember to reinstall it?

Restore the hard drive to the factory WinXP OS image - T60 1951-A31

I'm trying to restore the hard drive to the factory WinXP OS image on a number of 1951-A31 ThinkPad T60.
Found these instructions in the trouble shooting guide:
1. If possible, save all your files and shut down your operating system.
2. Turn off your computer for at least 5 seconds.
3. Turn on your computer. Watch the display carefully. While the message, “To interrupt normal startup, press the blue ThinkVantage button” is displayed, press the ThinkVantage button. The Rescue and Recovery workspace opens.
4. Click Restore your system and follow the instructions on the screen.
The problem is that Restore your system does not appear.
I found a thread on Thinkvantage looks promising: No Restore Option
The thread has this:
04-03-2009 12:55 PM
kamszelei, welcome to the forum,
from a lurker
which version of Think Vantage System Upate do you have installed?
If you have version 3.13.0009 installed please try the following; boot into Windows and run TVSU. It'll update itself, restart, then update itself again. Hopefully the option to recover to factory content will then be available to you.
Please also check the following registry key; HKLM\Software\Lenovo\TVT Common
If the "System Type" key is 1, change it to 0. If it is already set to 0 don't change anything and let us know
Unfortunately my Thinkvantage update system is saying it cannot connect because it is not running
Here are my questions about ThinkVantage:
How do I get Thinkvantage update to run?
How do I find the version number for Thinkvantage
How do I "boot into Windows and run TVSU
My other question is this:
Can I simply buy the backup DVDs with the original XP?
Thanks
(mod edit: fixed broken link)

You need to have a harddrive installed that contains the original system restore partition, many people delete them because they are redundant and use up space and after a while, most of the content is outdated, meaning it will install 4-5yo system and software that you'd only want to replace or update anyway. I prefer to install from a windows setup disc, but you can buy the restore sets, it's a set of 7 or 8 CDrom, not DVD discs. Lenovo sells them I believe, or if you can find someone willing to copy a set and send them to you, it would save you some money. I can tell you that if I had a several of these to do, I'd much rather use a single windows setup disc, preferably one with the latest service pack and updates, so I'm done after a few mins and one disc, opposed to installing many discs, changing from one to the other, then in the end downloading and installing service pack three, then a few dozen hotfixes, it could turn into hours of work on each unit, but if you want them with all the preloaded software, then that is the only way. Good Luck
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

External Hard Drive worked and now doesn't work

I've got a Macbook Pro and a Seagate external USB hard drive. I had the hard drive attached and everything was going good until it became disconnected from the computer without being ejected. Now whenever I try to plug it in i get a message saying that the disk is unreadable to this computer, or something to that effect.
After searching around, some people have suggested to others in similar situations to use Disk Utilities to repair it. When I open Disk Utilities, the HD is listed in the sidebar, but it won't let me repair it, or mount it.
Any suggestions for getting the hard drive to work again? Thanks in advance!
Kyle

This may be of some help.
For Seagate drives, you can download the free SeaTools utilities from Seagate's website. Unfortunately I think they only run on a PC. However, you should be able to look at and test the drive with these utilities. I had a Seagate drive that somehow had it's partition info altered when I plugged it into an old laptop. I put the drive physically into a PC laptop and then used SeaTools on a boot CD to reset the drive back to its Native Drive capacity. Took it out and back to the Mac and then everything was visible again.

Help! I've recently updated itunes & ipod but now it won't sync with my ipod even though the laptop recognises it and charges. I've reinstalled itunes and factory reset ipod, still nothing. How can I fix?

Help! I've recently updated itunes & ipod but now it won't sync with my ipod even though the laptop recognises it and charges. I've reinstalled itunes and factory reset ipod, still nothing. How can I fix?

iOS: Device not recognized in iTunes for Mac OS X
Also see:
If you connect the iPod to another computer does iTunes not see it?
What version of iTunes is installed?
Whast model iPod and iPhone and what iOS version?
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
For the enugh space, you are trying to sync too much media to the iPhone

Hong Kong vs Canadian hard drive + Rescue and Recovery FROZEN at Installing Language Pack

Hello everyone,
I have a Lenovo T61 Widescreen (Type: 7658CTO) that I bought in Canada in May 2008. Unfortunately my warranty has expired.
I had some problems with my 1st hard drive (which came shipped with my Canadian machine) and so had it swapped with a new one using Lenovo's Hong Kong On-Site service in January of this year (I now live in Hong Kong).
I am trying to do a Rescue and Recovery (full system restore to factory settings) using the Hong Kong drive, but it is frozen at "Please Wait, Preload Customization in Progress...." There is an accompanying command line screen that says "Installing Chinese Hong Kong language pack". At the top of this command line screen it says "Select X:\Windows\system32\cmd.exe - call c:\swwork\autoex.cmd"
It has been frozen for over an hour. I have tried rebooting but it freezes again at "Please Wait, Preload Customization in Progress..."
I do not have Rescue and Recover CDs as they were not an option at the time I purchased my machine. In the past, I have several times successfully recovered and reinstalled from my hard drive partition on my Canadian hard drive.
Both Canadian and Hong Kong hard drives were running English Windows Vista Home Premium Edition.
Unfortunately, I do not have my Canadian hard drive anymore because I had to hand it over to the Hong Kong technician in order to recieve a new hard drive.
Could it be that the Hong Kong On-Site Warranty service merely made a Ghost Image of a English Vista config without copying the necessary back-up partition to the hard drive?
Any other ideas for why my Rescue and Recovery is frozen???
Thanks!
Richmond

Hi,
Your question is confusing.
"Factory recovery" option creates self-contained media with the full image of the OS + needed drivers and is bootable, so you can boot from it and install OS+drivers to the original state. When you bought your machine, it should have a "Q" partition (possibly hidden) that holds this image, and that is what is copied to the media plus the boot environment.
"Create rescue media" from the advanced menu in Rescue and Recovery makes a bootable disk that you can use to boot the computer from, and on it will be a separate little version of R&R that lets you choose to restore from a backup or from factory disks/images. It does not (if I am right) have an image of the OS or drivers. However, it does (if I am right again) search your connected drives for such images and will offer you to restore from one if it finds one.
It seems to me that when you used rescue media, you probably booted into the rescue media but then might have restored from a non-Lenovo windows image? Did you by any chance have a drive with a non-Lenovo Windows installation disk connected?
Also, the fact that R&R is a 32-bit program should not affect what OS is restores; it restores whatever is in the image.

Hard Drive Partitions and Factory Reset

Similar Messages

Maybe you are looking for