Hard drive problem with HP Pavillion dv7-4180us

Hard drive problem with my HP Pavillion dv7-4180us. Using Windows 7.
Boots up sometimes and very slow.
Appreciate any help.

Have you booted into the BIOS or Diagnostics Tool to run the Hard Drive Test?

Similar Messages

  • Having hard drive problems with 2011 macbook pro

    Hey all,
    I am having some hard drive issues with a 2011 Macbook Pro running OS X Mavericks.
    How it happened: I was browsing the web when suddenly I got the spinny-wheel-of-death.  The spinny wheel of death stuck around for much longer than usual, and eventually my computer wouldn't even respond to mouse input (the mouse wouldn't move).  Nothing worked, so I did a hard reset of my computer.  When I rebooted the machine, it took me into "Recovery Disk Mode".
    Here are the diagnostics that I've done: In "Recovery Disk Mode", I have the option to use the Disk Utility, which I have done.  My main volume, called "Macintosh HD" is grayed out - and not mountable.  When I run "first aid" on it, it is not able to verify the disk because of an "Invalid B-tree node size".  It then tells me to repair the disk.  I have tried repairing the disk, but it fails - and that is not entirely unexpected because all of the forum posts that I have read up until now say that Disk Utility cannot repair this specific type of error.
    3rd party software I have tried: Based on the forum posts that I have read, Disk Warrior is especially capable at fixing this kind of error, so I went to my local computer shop, purchased the software, and booted into it.  Disk Warrior did not recognize my drive, and did not even show it in the list of available options.
    Other things I have tried: I purchased a Seagate external drive, and I tried to use Disk Utility to copy the contents from my MBP's hard drive over to the external drive, but when I do so, "Disk Utility" tells me that "Recovery partition restores can only be done on GPT partition maps."  I have also had it give me another error message where it says it "cannot verify source - error 254". 
    Additionally, I have seen around the internet that many people try using "fsck" to fix this issue, but I haven't been able to find a good explanation of the proper steps when using "fsck", nor how to specify to the "fsck" program that I want it to fix my "Macintosh HD" volume.  I've opened up the terminal, and gone into the "/dev/" folder, but I don't know which item in that folder, or any other folder, would properly lead down the path to my "Macintosh HD" volume.  Also, the man pages seem to be of little help here.
    One option I would like to try, but I have not been able to, is to try putting my MBP into Target Disk Mode, and see if my desktop machine (a Dell) can see it.  The problem here is that my Dell only has USB ports - no Firewire, and obviously no Thunderbolt ports.  I would need to find a way to plug my MBP into my Dell while it is in Target Disk Mode, but from what I can tell, that's impossible if I don't have a Firewire or Thunderbolt port on my Dell.
    So, now having explained everything I have tried, can y'all give me any advice on how I can recover my drive without completely repartitioning it?  Although most of my important data and files are located on cloud services, there are definitely some files on the drive that I don't have backed up, and I would like to recover the drive without losing those files.  What suggestions can you give me?  Thanks!

    Yes, BUT...
    ... there are many problems that are really easy to eliminate by replacing the Hard drive, including ones that have nothing to do with actual Drive Hardware failure. These include corrupted install of Mac OS X, its EFI partition, clobbered partition tables, or the appearance of Bad Blocks in a critical area.
    Any of these problems can sometimes be eliminated by re-initializing the entire drive and writing Zeroes, and re-installing from scratch. The trouble is, this process takes hours to complete, and is not guaranteed to be successful -- you may still need a new drive after all that effort.
    I learned from my Plumber that consumers have no appetite for solutions that might work, and detest return visits for any related problems whatsoever. You or your friend may have had your drive replaced, not because it actually failed, but because the situation was troublesome, and the provider thought you would not tolerate anything less than a crisp, complete fix on the first attempt. And based on the cost of technician time, it may have even been cheaper that way.

  • Hard drive problem with Pavillion DV9722EG notebook

    I have the a.m. notebook with a single 250GB hard drive installed, and there is an empty slot for a second hard drive.
    I tried to install a second hard drive, but the hard drive is not recognised in any way in BIOS... the BIOS is the latest version from here:
     http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-69499-1&lc=en&dlc=en&cc=us&product=3668082&os=2093&lang=en
    I really would need to install a second hard drive... and if anyone knows how to solve this problem, I would really appreciate any hint!

    Sorry to say you are not alone in your problems:
    Other thread
    I have not actually tried to put a second drive in a dv9000 but based on other threads there are people who have success with it. I recall one guy had two hard drives and only one of the two would work in the second slot. Others have completely failed to get a second drive working as you can see above. I own a dv7 and have had no issues installing a second drive in it. 

  • Problem with HP pavillion dv7 giving message (a problem with the internal fan enter = shutdown

    HP Pavillion DV7 notebook PC
    Windows 7 64
    intel I5
    6 gig memory
    service pack 1
    I am trying to identify a problem with my HP Pavillion dv7 laptop
    Several months ago it started getting hot and showing messages about problems with the internal fan and battery. It would say enter = shutdown and shut off. I suspected a bad battery so I checked it without it just plugging it in with the power cable. It seemed to work better so I assumed that was the problem.
    I ordered a new battery and it worked for a while. The problem came back and is getting worse. I can run it without the battery for a while but it gets got and shows the same message.
    I read on here that flashing and updating the bios worked for some but the latest update gives me an error IHISI not support BIOS then Insyde flash not supported.
    any help would be great this PC has a lot of info on it and I dont think it is a lost cause
    thanks

    Hi duddy, sorry to hear that you are having issues with your computer over heating.  I have found a document that will assist you with Restoring the BIOS.  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02693833&lc=en&product=5199538&tmp...
    I have also found a document that will assist you with Troubleshooting and Overheating and Auto shutdown issue.    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03904182&lc=en&product=5199538&tmp...
    If you are still having issues, please let me know and I will be happy to offer more assistance..
    Thank you.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Samsung hard drive problems with mid 2009 Macbook Pro

    Arghh, this is driving me mad. 
    I'd like to know if anyone has installed a Samsung HM641JI SATA II hard drive into a mid 2009 Macbook Pro (mine is a 2.8Ghz) and, if so, how they managed it. The drive is 640GB. These are the steps I've taken:
    1. Swap out the stock drive for the Samsung
    2. Boot from a USB drive which contains a mirror of my system
    3. When the system identified the new disk, I formatted it with 2 partitions (GUID table, HFS journaled)
    4. Reboot
    5. System is very slow. Boots from USB but can't use keyboard to login
    6. Switch off and try again
    7. Remove Samsung drive
    8. Reboot from USB (works perfectly)
    9. Downgrade firmware to 1.6
    10. Replace samsung drive and try again
    11. System boots from USB
    12. Verify that drive is running at 1.5Ghz
    13. Disk utility and system profiler both crash
    14. Disk unmounts by itself and other random weirdness
    15. Remove Samsung drive
    I've read endless reports about the firmware in this model of Macbook Pro and its issues with SATA II but struggling to find anything current and specific. Two questions:
    a. Is there anythign I can do to get this drive to play nicely?
    b. What drive should I get if the answer to a is no?
    As a bit of background.. my system began playing up last week with lots of spinning beach balls resulting in forced switch offs. Booting from a mirror on a USB drive works perfectly so I concluded that the drive was on its way out. A drive test utility confirmed this. I'm now wondering if it really was the drive or the cable or the logic board.
    Any advice appreciated.
    Cheers
    //A

    I'm coming around to the idea that this might be a problem with the SATA cable rather than the drive.
    I currently have the stock drive (Hitachi) back in the macbook. It mounted for a while and was then ejected when I tried writing data to it. System profiler reports that "There was an error while scanning for Serial-ATA devices."
    I was able to mount the same drive in a USB enclosure this afternoon without any problems. Right now, I seem to be having issues with both the Samsung drive and the Hitachi drive - I wasn't suspicious of thr latter because I thought it was failing.
    I found one or two accounts of other people having similar problems that were resolved with a new sata cable.
    How does a cable fail? Could this be my problem?
    Cheers
    //A

  • Hard drive problems with 975X Platinum edition

    Hi guys.
    I was wondering if you could help.
    I recently upgraded my pc after the power supply was shot on my old one, I decided it was time I did a big update anyway, as it was using non pci express etc.
    I plumped for the 975X Platinum complete with Samsung DVD writer, nividia 8800GTX and two Western Digital SATA II drive, a 250GB for my 'C' drive and a 500GB for my 'D' drive.
    Everything went in fine, install Vista Premium perfectly, I copied across my documents I'd backed up onto an external drive onto the 'D' drive no problems...however, after downloading some Vista updates, I went to do a reboot, and it hung during POST.
    After much frustration the D-thingy lights were showing it was halting during the IDE Controller initialisation.  By a process of elimination, I discovered the bios won't get through POST while the 500GB 'D' is connected.
    I've checked that it's not the SATA cable, the power cable, the SATA socket on the motherboard...but it just will not start up with that drive hooked up.  However, if I starting Vista without the 'D' connected, then connect it while it's running (yes, I know I shouldn't really do this), do a scan for new hardware, the drive starts up mounts itself as 'D' and works happy as anything.
    Could you tell me if there's some configuration I have wrong in the BIOS, or is this just simply a faulty hard drive???  As far as I know I have everything set up in BIOS correctly, such as having SATA set to IDE and not RAID etc...but I guess I could have missed something.
    Any help you can offer would be much appreciate...before I decide to just send the hard drive back and hope it is that, and not something I'm overlooking.

    Sorry, yeah, I got a little carried away and excited.
    The problem I noticed using the Western Digital tool was that it was seeing both the drives as the 'C' drive, so obviously on booting with them both connected, it was getting into a mess.
    I have no idea if I should have done this in the first place, but, when I put it all together, on the main board, there appears to be one SATA connector that's set on it's own, under the others.  I'd used that for the DVD writer and placed the hard drive ones all together.  So I just swapped the 'C' hard drive into the lone connection, and put the DVD Writer and 'D' drive into the ones that are clumped together.  It seemed to boot up fine, then using the Western Digital tool again, set up the 'D' drive.
    I've had no problems since.
    I always thought that SATA was just plug it in, and it sorts itself out...so dunno if I should have done that in the first place.  I'm still getting used to the newer stuff...I've made do with none PCI Express and IDE for ages now.
    It must have been me setting it up wrong in the first place I guess. 

  • External Hard Drive problems with iTunes and iPod

    I recently purchased a 320 gig external hard drive for my computer, hoping in part to load my iTunes library onto it. Obviously I'd have much more room on disc than my actual iPod, so I was going to manually manage my music (an option I didn't have selected on my iPod before).
    I followed all the online help topics which have all been helpful so far. I organized my music files, changed my directory, consolidated my library, and now everything is on the external hard drive and is working just fine.
    The problem comes when I connect my iPod. iTunes barely even seems to recognize my iPod all of a sudden, saying that it has been corrupted and needs to be restored. When I try restoring it, nothing happens, and I can't seem to do a thing about it through iTunes. Of course, there's actually nothing wrong with the iPod at all, since it still works fine and plays music exactly the same as before. It simply won't update or do anything at all when hooked up to my computer.
    I know this has something to do with the new hard drive, since everything was just fine a few hours ago, I just can't figure out why I can't get my iPod to sync all of a sudden. Like I said, my iPod is working fine otherwise, iTunes is playing music through the external hard drive without any issues, and I haven't touched any files other than music files (I haven't even deleted them off my original hard drive yet, so all the original fines remain unchanged, even though I switched the directory).
    To the best of my knowledge, all my software is up to date, and the iPod is a 30 gig photo. Any ideas?
    pc   Windows XP  

    Yeah, I gave the new drive the letter Z, so there shouldn't have been any conflicts there. I also tried your other suggestion, and while the computer recognized my external hard drive, it didn't seem to make any difference once I plugged in the iPod again.
    I've been wrestling with this for days now. I've tried changing the drive letters for both the external hard drive and my iPod several times (but no matter what, the iPod always seems to take F when it's unplugged and then plugged back in). I've tried restoring the iPod on multiple occasions. I've tried reinstalling all my USB drivers. I've consolidated my music library on several occasions (I now have two identical libraries on my external hard drive), yet annoyingly, iTunes seems to keep switching file paths away from the external hard drive and back to their original locations on the C drive. I'm trying to free up internal hard drive space, not house 30 gigs of media on it. That's what this new external hard drive is for.
    Somehow, I was able to get them both to be recognized at the same time, but it never lasts long. I'll start iTunes with the external hard drive disconnected, plug in my iPod, wait for the iPod screen to come up in iTunes, then plug my external hard drive back in. Then, I can miraculously start to transfer music back onto my iPod, but iTunes doesn't seem to want this to happen for some reason, and will usually cut off the transfer. So far I've managed to put three whole songs on my iPod.
    So now I'm trying to do two things. One, the same as before, get my computer and iTunes to recognize both my iPod and my external hard dive at the same time. And two, get iTunes to stop changing the file paths back to the C drive. These files are already on my external hard drive and don't need to change.
    (As a side note, I should comment on how helpful people are on this discussion board. The Apple representitives I called on several occasions seemed totally unwilling to help, acting more like pushy salesmen than anything, while people here seem to be much more friendly and knowledgeable. Just thought it needed to be said.)
    pc Windows XP

  • Lacie 250GB hard drive problem with Aperature

    I have ran out of space on my G5 so attached a Lacie 250GB hard drive. However this immediately started causing errors on the program. It would create a grey box in the middle of the screen whenever I tried to import anything and would cause other problems that would force me to have to restart the computer. Do you know why it does this and how I can stop it? I am desparate for space right now!

    First check with Disk Utility that the external drive doen't have any error.
    If the external HD is USB or Firewire 400 I wouldn't copy the whole Library to it because will slow thing down as it's slower than the internal drive.
    Instead of copying the whole Library move files that you don't need at the moment by referencing them to the external Library. Select the images in the browser and go to File/Relocate Masters.

  • External Hard Drive Problem with latest Upgrade

    Since my lastest software update on my mac mini (the most recent, only a few days ago), my external hardrive has been reading (loudly, this is the problem) a chunk of data, about a MB or so, to the processor every 60-90 seconds. none of it is being written. there's no CPU usage (i just watched the activity monitor for a while). It happens even more frequently when I'm using itunes (stored on the Ex HD).
    My hard drive is a LaCie with firewire connection.
    Any ideas, anyone?
    Thanks.

    JOrdan,
    You write that everything functions as normal with the external drive disconnected.
    Then (if I am surmising correctly) when you reconnect the external drive., the problem returns.
    From this, I infer that your computer, without the external drive, is perfectly able to perform all of its functions.
    But there is something on the external drive that requires some of these functions to be performed on it - a file of some sort that is set to be regularly checked and updated in some way.
    So it sounds to me as if you might want to take a look at everything you have on the external drive, and try to pin down that one thing that is asking the computer to do work on it.

  • Replaced hard drive - problems with time machine

    My hard drive failed and I have had a new one fitted by Stomfront but now need to replace all the data.  They recomended putting Mavricks on the new drive and that was put on the new hard disk but the time machine back up has Yosemite.  Seems to cause all sorts of problems.
    I cannot seem to get iPhoto or the photos that were in iPhoto back.  The same with iMovies.
    The Mac is a 27 inch late 2009 with 3.06 GHz Intel Core 2 Duo with 12 GB Ram running OS x 10.9.5

    Inherit a Backup
    Inherit a Backup (2)

  • SATA hard drive problems with k8n neo4 plat

    Helo , I am hoping someone can help me with this. I have read Fafner's thread on installing a sata hard drive on the neo4 mb but the only utility program I found on wd site is called " lifeguard11 for windows". Is this the right utility to use to partion my hard drive? I burned it to a cd and and my computer will post but will not boot from that cd. I have followed the instructions that came with the mb and used the floppys at F6 but it won't countinue to install windows after that.
    Also I'm not sure how to enable sata in the bios. Do I go to integrated peripherals/sata devices config. and at the top of the screen it say's RAID Enable. Do I enable that and then enable sata1 raid? I am only using one hard drive. Thanks for help you can give.
    k8n neo4 plat/bios v6.00 pg
    amd 3800+
    western digital 74GD Raptor
    evga 6600gt
    light-on cdr
    floppy drive
    ocz modstream 520 p/s
    highspeedpc test bench

    Quote from: roller on 27-March-06, 08:33:35
    Helo , I am hoping someone can help me with this. I have read Fafner's thread on installing a sata hard drive on the neo4 mb but the only utility program I found on wd site is called " lifeguard11 for windows". Is this the right utility to use to partion my hard drive? I burned it to a cd and and my computer will post but will not boot from that cd. I have followed the instructions that came with the mb and used the floppys at F6 but it won't countinue to install windows after that.
    Also I'm not sure how to enable sata in the bios. Do I go to integrated peripherals/sata devices config. and at the top of the screen it say's RAID Enable. Do I enable that and then enable sata1 raid? I am only using one hard drive. Thanks for help you can give.
    k8n neo4 plat/bios v6.00 pg
    amd 3800+
    western digital 74GD Raptor
    evga 6600gt
    light-on cdr
    floppy drive
    ocz modstream 520 p/s
    highspeedpc test bench
    My system is similar to yours, if your just using the one Raptor you don't need any special drivers, your mother board will detect the Raptor with out any special settings. I hooked my Raptor up to SATA 1 (look on pg 2-2 of your book for the location) If your only planing on installing one operating system on your hard drive, such as windows XP pro, Windows will format and partition the drive for you.
    If your having problems booting from a CD make sure you change the boot order in the BIOS (under advanced bios features pg. 3-8 of your manual) so that CD is before HD. For example, mine is set up for: First boot device = Floppy drive, Second boot device = CD Rom, Third boot device = hard drive, and etcetera. if your using more than one hard drive such as an IDE drive make sure you set the "hard disk boot priority" on the same page to the hard drive you want to boot from.
    Once that is done put your Windows CD in the CD drive and reboot, Windows will guide you through the rest.

  • FireWire 400 External Hard Drive problem with Macbook

    I have been using the firewire 400 connection of my macbook (2 ghz Intel Core Duo, OS X 10.4.11) with a LaCie 320 GB 7200 RPM with no trouble for over a year now. Suddenly, the drive is really slow to mount. Sometimes only one of the 2 partitions mount (which never happened before). And it takes considerably longer to access files, let alone load one up.
    I tried the external drive with the same fw 400 connection on a G4 running 10.3.9 and a PC running XP and both mounted fine (with, as expected, only the windows compatible partition loading in the latter case). Data was quickly accessed and loaded on both machines.
    So, thinking it was a problem with my macbook's fw port, I tried another fw external drive, which mounted very quickly and was quick to access and load data.
    What is going on?

    Hi George,
    Have you had a look in the system.log file in the Console application? It sometimes a good start to check to see if its reporting any errors when you plug the drive in. Note the exact time that you plug in the drive. This will make it easier to find the part of the log you should be looking at.
    Another thing you can do is run a disk utility such as Disk Warrior on the drive and optimize the directory. Directory problems can also cause drives to mount slowly. On the other hand it doesn't really make sense that the drive will mount quicker on other machines. Hope this helps.

  • External hard drive problems with Time Machine

    My external Samsung G3 back Up hard drive disappears off the desktop when my imac sleeps and I have to unplug and reconnect the USB for time machine to see it again. The initial back up is fine and the drive re-formatted and partitioned OK. Any thoughts?
    www.mtbmitch.co.nz

    Hi Nick,
    Avoid the WD files completely, not needed & often a problem.
    You need to erase the Drive, & to use it on both Format it MS-DOS/FAT32, on the Mac or PC, but will have a 4 GB filesize limit, as well as other limitations.
    One option not mentioned yet is MacDrive for your PCs... allows them to Read/Write  & Format HFS+, so no need to reformat it...
    http://www.mediafour.com/products/macdrive/

  • Iomega hard drive problems with iBook

    I've just bought an Iomega 120 GB portable hard drive but it refuses to show up on desk top. I'm running OSX 10.4 which should be fine. I don't have any very large files (just photos and music) and no more than 50GB worth.
    Any ideas what could be the problem?

    could it be the power supply provided by the iBook isn't sufficient to power the HDD; it has no independent power supply?

  • New Hard Drive - Problems with iPhoto Library

    I recently had to replace my hard drive. I've updated my software (I think) back to what I had before the crash. I've retrieved my photos from my external hard drive. However, when I try to open iPhoto, I get the message "You can't open your current photo library with this version of iPhoto. You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto." I think I'm running version 6.0.6 of iPhoto.
    I can find the pictures on my hard drive (it looks like they're in my iPhoto library), but cannot get iPhoto to work. Any help would be greatly appreciated. Thanks!

    Try these in order - from best option on down...
    1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
    2. Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    3. If neither of these work then you'll need to create and populate a new library.
    To create and populate a new *iPhoto 6* library:
    Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
    Move the iPhoto Library to the desktop
    Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
    Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
    When you're sure all is well you can delete the iPhoto Library on your desktop.
    In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.
    Regards
    TD

Maybe you are looking for