Hard drive question dead-dying or not

Today my harddrive seemed to be failing. When I randisk repair from the install disk it would not repair "the underlying task reported failure on exit". After several tries to reboot with installation disk the hard drive was not even found. I finally let disk utility run and found the disk. The only thing I could do was erase. That worked and I reinstalled 10.4.4. Now when I run disk repair it comes back OK. Could there have been a software issue which caused the inability to see the disk? Should I take this thing in (I have Apple Care) but if it shows nothing wrong what can they do??
Thanks!

What is the SMART status of the hard disk. It should be verified

Similar Messages

  • Itunes & external hard drive questions "original file could not be found"

    I recently got my first apple, a Powerbook G4, and I am trying to figure out how to store and access my music files that are on my external hard drive. I have some music stored on my laptop and the majority of it on the hard drive. I can play the files on my computer's hard drive(itunes finds them), but the files on the external hard drive will not play, unless i seek it out manually. The message says "the song could not be played because the original file couldn't be found. Would u like to locate it" My question is how to get the files in my library to play when they are stored on my external hard drive. Any advice would be appreciated.

    There's something missing in your explanation. If you're getting the "original file..." message, that would indicate that you may have had all your music files on your laptop drive at one point and them moved some of them to the external drive without using the proper procedure.
    If you don't have a lot of playlists, star ratings, and that sort of information that you're trying to preserve, then Mike's suggestion is an easy way out. If you do have a lot of that kind of information, then you may need to see if you can restore your setup to its former condition, when it was all working, and then use proper procedures to move files to the external drive or whatever it was that you were trying to do.

  • I have 4 devices on an iTunes whose computer hard drive is dead. How do I get my devices on a new iTunes on a different computer and not wipe out my contents?

    I have 4 devices (iPhone 3GS, iPhone 4s, iPad2, Mini iPad) on an iTunes whose computer hard drive is dead. How do I get my devices on a new iTunes on a different computer and not wipe out my contents?

    This should be of great help to you.
    https://discussions.apple.com/docs/DOC-3991
    Or this one.
    https://discussions.apple.com/docs/DOC-3141

  • Hard Drive is dead - deciding what to do next

    Hi all,
    My computer is a 12 inch Powerbook G4. My hard drive is dead.
    Here's what happened. Night before last my powerbook was freezing randomly. In retrospect the HDD was making some clicking noises but not consistently. Following morning it freezes one last time. On reboot, it won't finish starting up.
    I run Tech Tool and all the HDD scans fail. I use Disk Utility on the Tiger OS CD and it also comes back saying that the HDD has failed. All the repair attempts by these tools fail. I read some articles here in the forum that led me to pay the $5 and download Data Rescue II boot cd file to try and see if I can recover anything. I'm burn the disk image to a cd, but am unable to boot off the disc.
    I make an appointment at the Genius Bar at my local Apple Store to basically confirm what I think has happened. They hookup their firewire drive and see that basically there is nothing viewable on the HDD and that it is dead. Since I'm out of warranty, Apple's repair option is to pay around $300 to send it to their repair facility. I'm thinking I may do the replacement myself.
    So, my understanding is that the drive that's in there is a 60GB 4200-rpm Ultra ATA/100 hard drive. My question is can I upgrade to faster, larger capacity drive? How do I know what drive will work?
    Thanks for taking the time to read my post.

    If you want size, definitely get the 250GB drive. It is the largest-to-date drive. I remember just "weeks" ago when I recommended this option to some folks, people thought I was fibbing since the previous option for largest drive was 160GB.
    They also thought I might have been confusing it with the SATA drive for MacBook and MacBook Pro computers.
    If you're looking at speed, then it's the 100GB drive at 7200RPMs. I'm sure eventually, they will come out with a higher capacity for the 7200RPMs, much like the 250GB story.
    I debated over that myself, when I decided to tackle upgrading the drive on my other PowerBook, the 15-inch one. Those are easier. I don't think I will ever pop open the 12-inch PowerBook to do any work on it.
    250GB gets space. I wanted it, but at the time, didn't have the money. I got a great deal on a Seagate 160GB 5400.3 RPM drive (the ".3" stand for the version drive you get). It was less than retail because of a price match, plus a store credit coupon I had.
    So I went for it. Plus, this drive had Seagate's "perpendicular recording" technology that makes it just as fast--so reviews said--as the 100GB 7200RPM drives.
    And 5400RPM vs. 7200RPM drives are really nominal in speed difference. It's not noticeable, according to my research. Where it is noticeable is video editing, and intense tasks. Then there's the factor of higher capacity drives with slower speeds, beating out lower capacity drives with higher speeds.
    But I don't want to go in to that. I'll be talking all day!

  • Hard Drive is "Dead", any way to get my data?

    My hard drive has seemingly "died." I get a clicking sound from it, which I'm assuming is the heads clicking together. It happened once before but I was able to fix it by re-installing OSX and starting from scratch, but not before getting my files via Firewire mode. Unfortunately, now I can't get back to Firewire mode. I've tried EVERYTHING to get something, but it looks like my hard disk isn't being recognized at all.
    I already called AppleCare and they're going to fix it, but I'd like to save some docs before I have to send it in, any ideas?
    Thanks,
    Brandon Kea

    If Applecare is going to fix it and the documents aren't needed immediately, you can have Apple do a data recovery service for ~$50 last time I checked.
    Unfortunately, I too learned the hard way when my iBook's hard drive (G3, 700Mhz) died unexpectedly. I'd certainly recommend an external HD for backup if you have the money. It'll certainly pay off and be worthwhile for important documents
    Best of luck!
    -Ryan

  • I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??

    I just got a new mac and use my external hard drive to save all my images to but whenever I go to save my photo to my hard drive it says I do not have write access....Whats wrong how do i fix this or do i need a new hard drive??@

    This is a Mac question not a Photoshop question, and I am a Windows users, but I can Google and this might be what you need to do:
    http://www.makeuseof.com/answers/change-read-permision-external-hard-drive-mac/

  • K8T Master 2 FAR; Hard Drive Questions About

    Greetings!
    I just got off the Google bus and stubbed my toe on your doorstep.  What luck!
    I have many questions, and it's getting harder to find answers for a mainboard that's not being sold "new" anymore.  I did see some other topics that go along lines similar to my own, but I figured it would be a good idea to open a new thread with my specific questions.
    I have decided to split my questions into three parts.  This is part one, "hard drive" questions.
    HARD DRIVE RELATED:
    Western Digital recently announced a new high-capacity SATA Raptor drive, with 150 GB of storage: 
    1)  Can I mount two of them into my K8T Master 2 FAR system and "hardware stripe" them for Windows/XP?
    ....1A)  If yes, is there a minimum recommended BIOS that I should be running?
    ....1B)  If no, then would it be feasibile to "software stripe" them in Windows/XP Pro?
    If I decide to proceed, I will be well-prepared to accept the risk of data loss that would occur if one drive were to crash.
    I currently run my system with a removable SATA drive caddy for my system drive.  This makes it easy to swap OS's by swapping hard drives without opening my CPU case.  If I go with a dual-striped SATA drive arrangement and two Raptors, then I'll replace that removable caddy with a unit that can accomodate two SATA drives. 
    ....1C)  Once in a blue moon, I get a BSOD after having swapped SATA drives.  It happens when I first boot Windows/XP after having run Linux.  Hot-swappable claims notwithstanding, I always swap drives while the system is powered down, although I don't typically shut off the hardware switch at the power power supply.  Are there any known issues or reports of other people having similar occurrences? 
    I also run some IDE devices for data and archival purposes.  My system is typically set up as follows:
    CH 0/0 - Data drive
    CH 0/1 - DVD burner
    CH 1/0 - Data drive
    CH 1/1 - Data drive
    Recently, my system stopped "seeing" any hard drives on CH 1 drive 1.  Known good drives won't show up in the BIOS, and auto-detect doesn't "see" a drive in that position.  I have tried more than one drive, and the problem stays on that channel and position.  I swapped cables with a known good cable, and the problem stays on that channel and position.  For the time being, I have disconnected one of the data drives...but I'd really like to resolve this issue if possible.
    ....1D)  Are there any known problems or issues with "disappearing IDE devices" in the K8T Master 2 FAR?
    Thanks in advance!

    Can't say, this is the first time I hear about SATA caddies....
    Maybe a bad contact or so?
    Sata is pretty sensitive to connection problems, or even folded cables for that matter...

  • I have been storing my Aperture and IMovie Libraries on an external hard drive that recently died.  Fortunately I've been using Time Machine to back up to a 2nd external drive.  How do I restore my libraries to a new external hard drive?

    I have been storing my Aperture and IMovie Libraries on an external hard drive that recently died.  Fortunately I've been using Time Machine to back up to a 2nd external drive.  How do I restore my libraries to a new external hard drive?

    This is a tricky one.
    Open up Time Machine and go back to a date using the timeline on the right side of the window when you know the drive was working and was backing up as part of Time Machine backups.
    Click on the name of your Mac under the Devices heading on the left side of the window in Time Machine, and if things are working correctly you will see Macintosh HD (or whatever you have named it) and the name of the external hard drive that was backing up in the past.
    Right-Click on the name of the external hard drive and then click on "Restore (name of drive) to....."  You may be asked for your adminstrator password at this point.
    It might be easier to restore the drive contents to your desktop if you have room on your Mac, and then copy things over to the new external drive where you want to store the Aperture and iMovie Libraries.
    Once the libraries have been moved over the new external hard drive, you will likely need to "point" Aperture and iMovie to the location of the libraries on the new external hard drive.

  • Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet.

    Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks

    I did not say it is not possible.
    I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
    Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
    Maybe you can get on the Internet over Ethernet.
    You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac).

  • One or more hard drives in Server Backup are not connected

    A year ago I moved from Windows Home Server to Server Essentials 2012 as a backup solution for my simple home configuration - 2 Windows 7 Professional desktops.  It was a perfect solution and works flawlessly - and has saved my tail on numerous
    occasions.
    The configuration is simple - I have a internal SSD drive from the operating system and a few other applications and (2) identical 4 Terabyte internal hard drives setup as a single storage pool - configured as a 2 way mirror.  Every few days when I
    log into the Windows Dashboard and check out the alert viewer, I have a single error - "One or more hard drives in Server Backup are not connected".  When I follow the instructions - open the dashboard, click storage, hard drives - I see a single
    C drive (which of course is connected - it runs the OS) and a single D drive - the storage pool.  Clicking on the D drive and "Advanced - Manage Storage Spaces" shows my single pool (a green OK) and the 2 physical drives (also a green OK).
    There are no other drives attached to this server - no external USB drives, external hard drives - nothing.  Why is WSE showing this message?
    Matt M

    Go into the Server Backup Selections and reconfirm what is selected, then save.
    If it persists, change the selection (remove a folder) and save, then go back in and correct it, then save.
    Robert Pearman SBS MVP
    itauthority.co.uk |
    Title(Required)
    Facebook |
    Twitter |
    Linked in |
    Google+

  • Just baked up my macbook pro to an external hard drive. my computer died on me and i plugged it in and rebooted it ,started time machine and finished backing up but. just wondering if thats good or should i delete and restart

    just baked up my macbook pro to an external hard drive. my computer died on me and i plugged it in and rebooted it ,started time machine and finished backing up but. just wondering if thats good or should i delete and restart

    I wouldn't trust that backup.
    Make sure the system is connected to AC and Do Over.

  • Is it possible to boot windows solely from an external hard drive so that it does not affect the internal drive

    Is it possible to boot windows solely from an external hard drive so that it does not affect the internal drive. I already know that you can partition the internal hard drive to do the very same. Idon't want to use any of the internal space to run windows so I'm asking if it is possible to use a flash drive or external drive through USB to run windows when it is plugged in.

    Read https://discussions.apple.com/thread/5043762?start=0&tstart=0 to discover you can't do it.
    Allan

  • I need to reinstall lightroom 5 after a hard drive format. I do not have a disc.

    I need to reinstall lightroom 5 after a hard drive format. I do not have a disc.

    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

  • My hard drive is DEAD.I have to reinstall all my Adobe programms and I need to know exactly the correct process to do ( Indesign CS6-Photoshop CS6 - Photoshop CS5 -Illustrator CS6 - Ligntroom 4 )....

    My hard drive is DEAD.I have to reinstall all my Adobe programms and I need to know exactly the correct process to do ( Indesign CS6-Photoshop CS6 - Photoshop CS5 -Illustrator CS6 - Ligntroom 4 )....
    is any friendly tutorial available ?
    Thank you
    Albert

    If you didn't have the opportunity to deactivate the installations then you should contact Adobe Support thru chat and ask them to reset your activations for all the serial numbers involved.
    Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
    Make sure you are logged in to the Adobe site, have cookies enabled, clear your cookie cache.  If it continues to fail try using a different browser.
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
    Then you just reinstall the programs and activate using the same serial numbers.  If you need to download you can find download available thru the following links...
    CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
    Lightroom - all versions
    Windows
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
    Mac
    http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
    You might also find the following helpful...
    Download and Installation Help -
    https://helpx.adobe.com/download-install.html

  • How to access my hard drive when the system does not work

    how to access my hard drive when the system does not work

    Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
    Startup Issues - Resolve
    Startup Issues - Resolve (2)

Maybe you are looking for