Hard drive recommendation? Please help.

I want to replace the 100 GB factory hard drive in my dv9005us Notebook PC.  Will any of the following hard drives work?
Western Digital - Scorpio 320GB Internal SATA Hard Drive for Laptops Model: WD3200KTRTL | SKU: 8909586
SATA interface; 16MB cache; 7200 rpm; data transfer rates up to 3 Gbps
Western Digital - 320GB Internal Hard Drive for Laptops Model: WD3200BEVT | SKU: 8679762
Serial ATA interface; WhisperDrive technology; ShockGuard technology; data transfer rates up to 3 Gbps; 8MB buffer
Western Digital - Scorpio Blue 500GB Internal Serial ATA Hard Drive for Laptops Model: WD5000BEVTRTL | SKU: 9172799
Serial ATA interface; 5400 rpm; 3 Gbps data transfer rate
A few days ago, I purchased a
Seagate - Momentus 500GB Internal Serial ATA Hard Drive for Laptops Model: ST905003N3A1AS-RK | SKU: 9326428
Serial ATA interface; quiet operation; 3 Gbps; 16MB buffer
from Best Buy, but I am going to return it because there have been firmware problems with some Seagate drives and the box it came in says that it contains a 5 year warranty but the only thing inside was the drive.
Can I use a 7200 rpm 16MB buffer drive in my computer?
Thanks in advance for any advice/suggestions.

The dv9005us does not have the hard drive protection system. I believe that is confined to the HP/Compaq Business Models. So no worries there.

Similar Messages

  • My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD.  When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help!

    My internal hard drive isn't being recognized on my macbook pro but when I put the HD in my Mac Pro (desktop), the desktop computer recognizes the HD.  When I insert the installer CD on my laptop, it also doesn't recognize my hard drive. Please help! Thank you!
    I've also been getting an image with the folder and question mark. I've tried everything on the apple support page but it doesn't seem to work either.

    Well, I tried all of your suggestions and they didn't work -- no surprise because I was trying to backup to my external c.d. disk.  Duh!  The application for the home is in the mail.

  • My PC computer was wiped (virus) including itunes. How do I transfer the many playlists and music to the new re-installed itunes?? Ipod is synced to old itunes. I have all original music files on external hard drive. Please help?

    My PC computer was wiped (virus) including itunes. How do I transfer the many playlists and music on my ipod to the new re-installed itunes?? Ipod is synced to old itunes. I have all original music files on external hard drive. Please help?
    New itunes is trying to wipe the ipod. But have many many playlists (many hours making) which I want to save. Any help would be appreciated.

    If you want to just extract the playlists from your iPod, plug it in iTunes.  When it appears under devices, right->click on it and choose Export Playlists.  Save them to a location such as your desktop and them import them into your library once you have copied and imported all of your music back into it.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • My hard disk crashed and I cannot find out how to "contact customer service" other than this forum.  The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive.  Please help.

    My hard disk crashed and I cannot find out how to "contact customer service" other than this forum.  The website seems to just take me in a circle. I need to de-activate a license but cannot access the software due to a crashed hard drive.  Please help.

    Hi Anthony ,
    Here is the link to connect with Adobe Chat Support.
    https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
    Hope your query gets resolved .
    Regards
    Sukrit Dhingra

  • I can't format my hard drive! Please help!

    I had a lot of problems with my Mac mini - related to CD burning, CD reading, ejecting discs, hard drive partitioning, Mac OS X Leopard installation... so I can't tell I am surprised with my new problem, which is...
    I need to completely *erase my internal hard drive* on my Mac mini. So I opened Disk Utility, selected hard drive and went to Erase tab - I did everything as instructed by the app - but the "Erase..." button is not active! It's *not going to allow me to erase my hard drive*.
    Please does anyone know why? I need to reformat the hard drive and I just don't know how.
    Thanks, I hope this problem will be solved soon.

    Welcome to Apple Discussions!
    You can't reformat the drive you booted from, so in order to reformat the internal hard drive, you need to boot from the install disc that came with your mini (or a full retail MacOS install disk). That will provide you with an option to perform a full Erase and Install, performing the reformat and reinstallation in one go, or to open Disk Utility (in the Utilities menu) to perform a partitioning and reformat independently of a reinstall of MacOS.

  • HT5958 We are 4 min in to editing a video on final cut pro.  now my computer is freezing up.  I have heard that this is a glitch from downloading. (beyond frustrated)  is this from working from 2 external hard drives?  PLEASE HELP! =)

    PLEASE HELP. =) 
    we are about 4 minutes into editing a video for the first time on final cut pro x 10.1.  everything was going very smoothly, but then it started freezing up.  I had to do a hard reset and took it into the computer store that actually installed final cut for us.  they suggested that our mac actually is not capable of keeping up with final cut. (I FIND THIS HARD TO BELIEVE!!)  We work on an IMAC 2.66 ghz intel core 2 duo.  8 gb 1067 mhz ddr3. software os x 10.9.1 (hopefully that info will help for your suggestions)  Because we have soooooooooooo many hours of high def video, we are working off of two external hard drives.... is this a problem?? or do we really need to upgrade our computer?????

    Like Russ said, check Activity Monitor and see what else is running and turn off any Applications that aren't needed.
    Turn off wi-fi or disconnect the wire that goes to the Internet
    Turn off Background Rendering (if you see an orange line on the top of the time line that moves along and gets shorter while you're not doing anything that is a good sign that Background Rendering is running.
    I haven't used 10.1 yest but on the previous version there was a small circle approximately in the middle of the screen, about 1/2-inch or 1 cm in diameter, and it would have a number inside. The number is the percent complete of what is hapening. When it is Rendering the percentage will be shown.
    Basically, you probably need to free up resources.
    For what it is worth, my previous Mac Pro was a 1,1 2.66 machine, also with 8GB of, I think, 667 memory, and it would process FCPX 10.0.9 okay. It did have an upgraded video card, though.

  • Macbook Pro Hard Drive Problem - Please Help

    My macbook pro had a hard drive failure so I went out and bought a new hard drive and got it to work with the Mac OS, although 2 days later it crashed and now it is not being found when I use the disk utility (Cmd-R), I even ran a hardware test and showed no trouble found.
    Should I return this hard drive and get another?
    Or is there another problem that is occuring?
    I have a Macbook Pro (mid 2012)
    Thank You.

    I just installed a new ribbon cable for the hard drive...Now I get a new error that is popping a message saying "2003-f", this happens when I try to go to the online recovery (CMD-R). I tried two different hard drives and still won't let me get to the utility.
    Someone please help, my mini semester classes have started for my University, and I am stuck with no laptop.
    Thank You.

  • G4 Powerbook Hard Drive Problem - PLEASE HELP!!

    I have a powerbook G4 15 inch alu. It is running OSX version 10.4.11
    My system profiler tells me I have a 74.5GB hard drive with 69.34GB used, but I had wiped the HD in September 2008 and reinstalled the OS and few other programmes and files, so this shouldn't be the case at all.
    I have found that my the problem is with my Users folder - within Users, my user account (the main account, I have another account setup so my mum can use her iPhone) has 67GB used. But when I go into my user account (clicking through the icons, after double-clicking the MacintoshHD desktop icon), none of the folders within my account run to anwhere near 67GB. Totalled, they come to around 10-15GB at most. There's a good 50GB or so of hard drive that just seems to be missing.
    I ran Drive Genius to repair permissions and that eliminated a couple of GB of this 'missing space' but no more than that. How can I go about finding and reaccessing my lost hard drive space?
    FWIW - I reinstalled the OS in September because this was my University laptop and the result of 4-5 years use had resulted in loads of unwanted files. I saved the important stuff to discs and then reinstalled because it was much easier (I thought) than trying to find and get rid of all the unwanted stuff.
    Please please help. At the moment, the computer is running fine if a little sluggishly (understandable given how much of the hard drive is 'used'), but I had a nasty experience earlier this year with my G5's hard drive crapping ut and really don't want to end up in the same boat with this one. I also need that extra space back so I can use some programmes I can't install or work with as things stand.
    Many thanks for taking the time to read this and respond, I don't know enough about computers to have any clue as to how to proceed, so your help in this matter would be greatly appreciated.

    eww - will do and report back.
    cornelius - apologies for the ambiguity there. Hope this clears things up a bit:
    Users folder = get info says 69.34GB used
    Double-click on the Users folder and I get three folders - the shared folder, my mum's account folder, and my account folder. My account is the main/master account.
    The shared folder is empty. My mum's account folder has a couple GB used, mine has 66.5GB used.
    I double-click on my account folder, and get icons/folders for Desktop, Library, Movies, etc (the usual stuff). When I do Get Info for each of these, the sum of GB used by them is about 10-15GB, nowhere near the 66GB supposedly used.
    If it helps any, the File System is Journalled HFS+
    S.M.A.R.T. status is verified, and Drive Genius, Disk Warrior, and Disk Utility aren't picking up anything bad other than the corrupted permissions I repaired prior to making this post. Repairing permissions only freed up a few GB more space, still got 50 missing GB to locate and free up. Or start saving for a replacement HD, but if this is a sign of a crash, I'd rather know now so I can plan for that.
    Many thanks to both of you for responding so quickly - hopefully this problem is solvable.
    It doesn't make sense, there's nothing else which could have used those 'missing' GB. And, as I only reinstalled everything in September I know there's no way the few programmes I've added and 10 or so CDs I've copied onto the G4 could account for the missing 50GB. My HD should have most of its space free - minus the space used by OSX, any OSX updates, and literally a handful of small apps and files.

  • I have updated my software on my Mac to OS X v 10.9.5 and now my mac doesnt read any external hard drives? please help

    HI, I updated my software of my Mac Pro to OS X v 10.9.5, after I installed it, my MAC doesn't read any external hard drives. Not sure what to do now. Please help? Is there a way of updated drivers

    I have no idea where to change that
    Finder/Preferences/Sidebar and General for the Desktop.
    Do they show in Disk Utility?

  • Moving all my stuff to external hard drive. Please help!

    I just bought a western digital external hard drive with 500 gb since my g4 only has about 14gb left. Ive been noticing my computer has been slower when ive been using certain programs. How can I take off all my music and move it to the external hard drive safely? I have about 20+gb of music and I just thought it would help if I moved it.
    Can someone please explain how I do this?

    Assuming your music is in iTunes, this Apple note should explain it.
    http://docs.info.apple.com/article.html?artnum=301748

  • HP Pavilion p6653w hard drive crashed please help

    HP Pavilion p6653w 1TB hard drive unknown if seagate.  It completely crashed and all I get on start up is "hard drive failure is immenent please backup hard drive and have it replaced"  then I pressed F2 to continue and then all I get is a  DOS prompt.  I only bought the computer in 2010. Is there anything I can do to save it?

    Hi,
    Are you able to type anything in the DOS prompt screen? Or is it just a black screen with a blinking cursor?
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • T43. New hard drive. Please Help

    Hi
    I have a T43 2668 F3G, I am having so many problems with it I have decided it needs a new hard drive. The hard drive that was original from new is a Toshiba 80gb HDD2D09, to replace it I have a Samsung HM211HC, it says 120gb/5400rpm/8m/pata.
    Firstly I need to know if this new hard drive will fit my T43?
    Secondly I have re-installed my laptop before but how do I re-instal with a new hard drive?

    Welcome to the forum!
    That drive will fit in your T43, but will give the infamous "2010 error" on boot. I suggest getting a Fujitsu 120GB that will boot without triggering this warning.
    Hope this helps.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • I cannot install, only hard drive test. please help!

    hi,
    my iBook G4 crashed about 2 months ago and I got a new harddrive but it came with no operating system. I borrowed a friend's disks but everytime I put in disk 1 it will only go to Hard Drive Test and I cannot make it go to a section where I can actually reinstall. I have tried pressing command, c, command and c, and nothing. every time it goes to the Hard Drive Test and I have already run it and I passed.
    the girl with the disks also has an iBook G4 and I do not understand what the problem is. she just bought it after I did.
    I bought my laptop in the US but I am currently in Denmark and could not get Apple to actually fix my laptop but there should be no problem.
    please help!

    heychristaay,
    As I asked in My Previous Reply;
    "What OS was installed on your iBook before you replaced the HD?
    Have you tried installing, using either the disks that shipped with the iBook, or a Full Retail Version of an OS, that you may have upgraded to? Your own disks?'
    If the borrowed disks, do not look Exactly like THESE, they will not work to install Panther 10.3.x.
    Additional info in these links.
    Using OS X Install CDs/DVDs On Multiple Macs
    What's A Computer Specific Mac OS X Release
    Software Update, Upgrade: What's The Difference?
    ali b

  • How do I move my iTunes Music to an external hard drive? Please help!

    I bought an external hard drive and moved the iTunes Music folder from my local hard drive to the external hard drive and now the iTunes library appears empty. I moved all my music back into the local hard drive and the libarary is now full full of music again. How can I move all the files to the external drive and have iTunes retrieve the music from there?
    Thanks!
    Paula

    This article tells you the proper way to move your music:
    iTunes: Moving your iTunes Music folder
    After a successful move, always connect your external disk, before running iTunes.
    Failing to do so will iTunes cause to reset the 'iTunes Music folder location'.
    That means your next ripped CDs will be stored on your internal disk.
    If that happens, just set the proper location again in the preferences.
    Hope this helps.
    M
    17' iMac fp 800 MHz 768 MB RAM   Mac OS X (10.4.6)   Several ext. HD (backup and data)

  • Possible Hard Drive Failure - Please Help

    Hello everyone.
    I have a 24" Aluminum iMac (Mid 2007 model, I believe) that was purchased around November 2007. The internal hard drive is 500 GB (roughly 300 GB for OS X and 200 GB for Windows XP). My problem is that my iMac doesn't want to boot into OS X. Please note that I can still access my Windows XP partition by holding the option when the computer starts up.
    Here's a list of the things I've tried so far:
    -Calling the support number: The gentleman took me through some basic trouble shooting steps (including booting in Single User Mode and typing the fsck command) but couldn't resolve the issue, so he gave me a case number and made an appointment at a local Apple store which I could not attend. I have yet to reschedule another appointment.
    -Booted the "sick" Mac in Target Disk Mode while connecting it to another "savior" Mac via FireWire: Nothing. The target Mac goes into TDM correctly (FireWire logo bounces around screen), but the savior Mac did not recognize it. (The drive didn't mount?) This was the case with two different savior Macs.
    -Booted in Verbose Mode: I held down Command+V while booting the computer. The trouble seems to arise directly after the line "AppleIntelCPUPowerManagement: Intialization complete". The next step results in an error reading "disk0s2: I/O error.", then the computer shuts down after about 45 seconds.
    -Inserted "Mac OS X Install Disc 1": I held down option and selected to boot from the CD. I chose English as the main language. When the welcome screen pops up (to re-install Leopard), I instead chose to run the Disk Utility option from the menu bar. I see my hard drive (465.8 GB) which is split into two partitions ("Macintosh HD" which I assume is disk0s2, and "disk0s3" which I assume is my Windows XP partition). I attempt to verify disk permissions on "Macintosh HD" but it almost immediately bumps back with an error saying "First Aid failed. Disk Utility stopped verifying permissions on 'Macintosh HD' because the following error was encountered: The underlying task reported failure on exit." Next, I click on Verify Disk instead of Verify Disk Permissions. The errors in the details list (red colored text?) include "Incorrect number of thread counts", "Invalid node structure", "Volume check failed", and "Error: Filesystem verify or repair failed."
    -Tried to make an image of my current disk onto an external HD connected through FireWire: I thought this looked bad, so I figured I could re-install Leopard entirely. However, I have years of data on this hard drive that are irreplaceable (my fault for not backing it up to begin with). I hooked up a brand new 1 TB external drive via FireWire800. In Disk Utility, I can see the 1 TB external alongside my 500 GB internal. I clicked on the "Macintosh HD" disk and clicked "New Image" and directed it to create an image of my internal drive on my external drive. I click Save. After about five seconds, it bounces back with an error reading "Unable to create 'Macintosh HD.dmg'. (Input/output error)".
    Questions:
    1. What the heck happened? Is the problem the result of a head crash? Is it a problem in the boot sector?
    2. Is there any possible way to recover the data on the hard drive?
    3. Does a failure like this get covered by Apple Care Protection Plans? (the computer is covered, by the way)
    Thank you very very much in advance. Sorry for the huge amount of text. :-x
    Message was edited by: UnderTheMud
    Message was edited by: UnderTheMud

    Buy Disk Warrior and use it to repair your OS X volume (if it's repairable.) If DW cannot repair the volume then use Disk Utility to reformat the volume using the Zero Data (one pass) Security option.
    Do you have a backup of your OS X volume? Since you have tried using TDM to access the drive without success it's reasonable to assume your data may be lost. If you have an external hard drive you can use, then you could attempt to use file recovery software to see if your data are recoverable.
    At this point it is premature to assume the drive is bad since your Windows volume is functional. If you have Windows software for reading Mac drives you may try accessing the OS X volume from Windows.
    Basics of File Recovery
    General File Recovery
    If you stop using the drive it's possible to recover deleted files that have not been overwritten with recovery software such as Data Rescue II, File Salvage or TechTool Pro. Each of the preceding come on bootable CDs to enable usage without risk of writing more data to the hard drive.
    The longer the hard drive remains in use and data are written to it, the greater the risk your deleted files will be overwritten.
    Also visit The XLab FAQs and read the FAQ on Data Recovery.

  • My MacBook won't boot to Ubuntu on my external hard drive. Please help!

    I installed Ubuntu on my 500 GB hard drive, however, when I hold the option key down at startup to load boot manager, Ubuntu isn't there. The same thing occurs when I look at start up disks in system preferences. The Ubuntu boot loader is installed on my external hard drive.
    I know in windows you must access bios to boot from a USB device, Is it a similar situation for Snow Leopard?
    Thanks! Ryan

    Hi supernova329;
    On a Mac there is no BIOS. They use EFI instead which doesn't allow that.
    Since I have never use Ubunto I am unable to help you, my suggestion would be to repost over in the Unix forum;
    http://discussions.apple.com/forum.jspa?forumID=735
    Allan

Maybe you are looking for

  • Oracle Fault Management Framework - how to intercept first invocation

    I know the Oracle Fault Management Framework is only activated on faults that occur on invokes. Which is fine for all internal calls. However, is there any way to get the framework to be activated on the very first invoke? I want to be able to get th

  • Spring MVC Portlet Question in JDeveloper 11.1.1.4

    Hello All, I am trying to develop a spring mvc portlet and test it in Jdeveloper 11.1.1.4 (integrated weblogic server). Below is my portlet.xml ... I don't think portlet-class is getting loaded. Even if i put xxxxx in the classname i don't see any er

  • How to access the e-mails which are stored in different folders via Mac

    Hi guys, I am new to Mac. My problem is about the setting of Mac Mail. There are 8 folders with my hotmail account in order to automatically sort e-mail into folders. I only can get the e-mails of inbox folder via Mac Mail software. I am wondering ho

  • First checkout record then modify the record but failed !

    //check out record              CheckoutRecordsCommand cout = new CheckoutRecordsCommand(simpleConnection);              cout.setTableId(mainTableId);              cout.setSession(sessionIdu);              cout.setRecordIds(rdids);              cout.

  • Production order default settlement type

    Hi, After creating a production order, manually we are maintaining settlement rule by entering catogory and settlement receiver and after pressing enter automatically the settlement type proposed is PER, but we want system to propose FUL, pl suggest.