Hard-drive seems to be constantly in use?

Hello,
I've recently bought the Lenovo Idea Centre K430 and while I have been very pleased with it to date I've noticed that the white hard-drive light on the top of the box is constantly flashing even if I'm not doing much with the computer and I was wondering if this is the norm? If not, what do I need to do to stop it? Is there something running in the background that needs to be switched off for example?
I'd appreciate either confirmation that my PC is running as it should or any suggestions to resolve.
Many thanks,
Richard

Hi,
Thanks for the helpful and prompt response. I've opened up Task Manager and there are a few programs running in the background mainly; Internet Explorer, Microsoft Windows Search Index and Search Filter. I'm not currently installing anything and I'm using Windows Defender which isn't running at the moment either. Perhaps with the particular make of hard-drive it just flashes all of the time and this is normal. It is also quite noisy but it will probably have to be something I will need to get used to unless someone can identify what is causing it to behave like this.
Thanks

Similar Messages

How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?

How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?
I have an external hard drive attached to my Airport Extreme and I can access it just fine through Finder. I would like to be able to keyboard navigate to it in an efficient manner. I tried to use the "Go to the folder" feature but was unable to.
I had tried dragging the drive to the Network folder but the shortcut it created does not lead to the drive's contents...it seems to lead right back to the parent directory:
I hope I explained the question well. Thank you for all of your help and time in tending to my inquiry.

Cant you set up "back to my mac" then go to finder preferences and put a check mark under everything under the shared location. Also set up back to my mac on your airport extreme.

Ibook g4 won't boot, but hard drive seems fine

I have a ibook g4,800mhz. osx 10.4.8
On start up i get the folder & question mark. I have tried the following.
1) i booted with an os install disk. disk utilities reported the drive was ok it but couldn't see a disk partition so disk first aid had nothing to do.
2) next i ran disk warrior which had the same probably, it could see the hard drive, reported that the drive was functioning, but saw no partition.
3) finally i gave up and reformatted the disk, and re installed an os. this worked for 48 hours at which time the problem came back.
4) i can put the laptop in firewire mode connect it to a desktop and access the hard drive. I can format the disk using apple disk tools, i can install an new os, but after all this it still won't boot from the internal hd.
5) I reset the pram. also tried starting up with the option key down .. no hard drive is visible when i do this.
So the hard drive seems to work ok. Two different disk utilities see the hard drive and think its functioning ok. OSx installer runs without complaint, but the &$%! won't boot from the hd.
Anybody got any suggestions?

...this worked for 48 hours at which time the problem came back...
This is the time period that I was commenting on. If something was used during that time that corrupted the OS, it would cause the situation you are in.
If everything is perfect with the OS then something is wrong with the hard drive or the motherboard's interface to the hard drive.

I would like to connect an external hard drive to my time machine and use it as a network drive to store itunes and iPhoto how do i do this

I have just purchased a new my book hard drive and would like to connect it to my time capsule and store my itunes and iphoto contentent there to free up space on my internal hard drive . Can this be done and what is the process?

I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

I have an IMAC and I'm running OSX 10.9.2. I'd like to store my Aperture /IMovie Libraries to an external hard drive. In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the externa

I have an IMAC and I'm running OSX 10.9.2. I'd like to store my Aperture /IMovie Libraries on an external hard drive. In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives. Is this possible? Can I set up a RAID 5 format for redundancy?

I'd like to store my Aperture /IMovie Libraries on an external hard drive.
That is fine and recommended.. use the fastest disk you can afford.. ie Thunderbolt>USB3>FW800>USB2.
In addition, I'd like to partition the external hard drive so that Time Machine can use it to both back up my IMac and the external library drives.
Let me be clear.. you want to partition the one disk.. use it for TM and move your files to the external disk.. and then backup to the same disk.. You can do it.. but that is not a backup.. that is an experiment in how long you can get away with running files and backups on the same disk before you lose everything.. like Russian Roulette.. pull the trigger enough times and laws of probability will do you in.
You must have backups on a different disk .. otherwise it is pointless.
Can I set up a RAID 5 format for redundancy?
No.. you can buy special USB and Thunderbolt external drives that support RAID..
BUT that is still not a backup.. let me show why.. you make a silly move and corrupt your file in aperture.. it is not that rare.
Raid will corrupt all copies of the files.. it is replicated across all disks.
Delete a photo it is deleted across all disks.. you have no recovery.
Alway, always consider RAID system one disk.. backup onto another disk.. and if the photos or movies are at all important to you.. ie your family .. make another copy and store in a relatives house.. There is no such thing as too much redundancy.

HT201250 I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

ehphotograph wrote:
Can I restore docs from my hard drive if they were backed up using time machine?
Yes.
And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.
Also yes.
Directly-connected external drives (ie, USB, FireWire, Thunderbolt) are not backed-up by default. You must remove them from the exclusion list in Time Machine Preferences > Options to get them backed-up. (Network drives cannot be backed-up.)
And they must be formatted for a Mac -- any variation of Mac OS Extended.
If the drive is connected, you can browse or restore normally -- just go to the folder or document in question and Enter Time Machine.
If the drive is not connected, it's a bit different. See #E3 of Time Machine - Troubleshooting.
Message was edited by: Pondini

I am trying to upgrade my hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far, just before cloning may start and receive an "error 254" and can go no further. Any idea what this error is?

I am trying to upgrad the hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far throughj the process where its about to start cloing when I get a message " error 254". Any idea what that means and how do I get around this issue so I can use my new hard drive? Thanks for your input.
Vince

Connect the HDD to your MBP. Open Disk Utility>Erase and drag the HDD icon inrt the Name field. The format should be Mac OS Extended (Journaled). Click on the Erase button.
Then try the clone process again. You may use Disk Utility>Restore or a third party cloning application such as Carbon Copy Cloner or Super Duper.
Ciao.

I have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, help

i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated

Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
Power down the system and restart with the drive connected, go to DU and see it it is seen.

How to backup an external hard drive plugged into a time capsule using time machine

How to backup an external hard drive plugged into a time capsule using time machine.
I want to move my itunes library from the mac HD to an external plugged into the time capsule, but I want to be sure this drive will still be backed up by time machine. I currentlly see no way to do this.

There is no way. You can connect the drive to your Mac and remove it from the Time Machine exclusion list. Then it will be backed up, but that will stop when you reconnect it to the TC. While it's connected to the TC, you can copy it manually to another AirPort Disk by following the instructions here (with a slight modification):
Using AirPort Utility to make a copy of the Time Capsule disk

My external hard drives seem to be mixed up in lr4 and I don't know how to fix them

My external hard drives seem to be mixed up in lr4 and I don't know how to fix them! Help!

The file opened and cropped in photoshop was a camera raw file?
In File>Save for Web pick Jpeg from the drop-down

I have recently restored everything on my iMac after getting a new hard drive. When i try to use Elements, i get the following error code ERROR 150:30. Any ideas?

I have recently restored everything on my iMac after getting a new hard drive. When i try to use Elements, i get the following error code ERROR 150:30. Any ideas?

Did you use migration assistant to copy over programs, documents, and settings? You can't do that with PSE. Elements is not a tidy package in accordance with the apple developer guidelines. The installer strews stuff all of your hard drive in place the migration assistant isn't programmed to look and you can never hope to find all h the bits. You must always install PSE from scratch on a new machine. By attempting to copy it you have made a lot of trouble for yourself.
You will need to download and run this:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
and then you can go around and manually remove what you can reach. Look in applications, your hard drive>library>application support>adobe, your username>library>preferences. In the user library also delete any saved application states for PSE.
Then you can reinstall from scratch.

I am trying to shift my backup folder for many weeks to another location/drive on my pc hard drive(windows xp). have tried to use the recommended JUNCTION for the same but do not have a complete step by step instruction to do that. can anybody help me

i am trying to shift my backup folder for many weeks to another location/drive on my pc hard drive(windows xp). have tried to use the recommended JUNCTION for the same but do not have a complete step by step instruction to do that. can anybody help me

You can redirect <Profile>\<AppData>\Apple Computer\MobileSync\Backup to a folder on another drive using NTFSLink (shell ext., might only work on XP) or Junction (cmd line tool).
In essence you move the existing folder to a new location, create an empty folder where the old one used to be, then get the operating system/tool to link the two togther and silently redirect any file operation on the old location through to the new one.
tt2

Need Urgent help, I have made partition hard drive in my mac book and using OS mac

Need Urgent help, I have made partition hard drive in my mac book and using OS mac & Window8 seperately... for couple of days it works great for both window & OS mac But nowadays, my pc gets restart automatically while using window & even I cant access to my Mac OS........... I got some error in window (error80070003) ...>>>>> Now how can I format whole drive & recover my Mac book OS.without boot disk.

I can't find that model. If you open System Profiler in the Utilities folder look for the Model Identifier over in the right hand display. What do you find for the model ID? If your computer supports Internet Recovery here's what to do:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer. If Mavericks is not installed, then you can reinstall it by re-downloading the Mavericks installer.
You will need to use Boot Camp Assistant in order to create a new Windows partition, then reinstall Windows.

Can the hard drive from the Time Capsule be used as USB drive only?

My Time Capsule "router" kept losing the wireless capabilty, so I purchased an Airport Express (with the dual-band router).
I'd like to salvage the Time Capsule hard-drive portion and connect it to a USB port.
But when I plug-in the Time Capsule, the light blinks yellow suggesting some configuration problem.
When connecting to a USB port, my iMac will not detect a new device.
Can the Time Capsule hard-drive be used separately from the router?

Can the hard drive from the Time Capsule be used as a USB drive only?
Sorry, but no. The Time Capsule is a network drive, so it must be connected to a network using an Ethernet or wireless connection. The USB port on the Time Capsule is there only to add additional storage capacity.
Can the Time Capsule hard-drive be used separately from the router
Yes, you would configure the Time Capsule in Bridge Mode to do this. If you do not need the wireless capability, you can turn the wireless off on the Time Capsule.

HT204414 does the system library need to be on the primary hard drive or can it be on my external hard drive and still be able to use the cloud?

does the system library need to be on the primary hard drive or can it be on my external hard drive and still be able to use the cloud?

I have the system Library on a second internal drive and it is syncing with iCloud with no problems. Also the Media Browser it seeing it there.
Only make sure, your external drive is directly connected and correctly formatted MacOS Extended (Journaled).

Hard-drive seems to be constantly in use?

Similar Messages

Maybe you are looking for