Hard Drive seems to be full but it really isn't
Hi all.
My brother's hard drive is having a strange issue. It says it has 111MB of free space, but its a 300GB hard drive with around 120GB of files on it.
Using Whatsize does not reveal any more than the 120GB. There is only one login on the Mac.
Any ideas what this could be?
A screenshot of the issue is here:
http://localhostr.com/files/3e7728/issue2.jpg
Thanks
Doug
Try this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Similar Messages
-
Info on hard drives says its nearly full, but I have next to nothing on a new hard drive.
When I ask for info on my hard drive, it says that the disk is nearly full. I just had the hard drive replaced and there is hardly anthing on it. If I ask for info on each individual folder it only adds up to about 30 gigs. I don't see anywhere a big folder or file. The hard drive is 465.44 GB. It thinks I've used 463.5 GB.
Do you have any other drives connected to your computer? Please post what you find checking Get Info as I posted earlier.
Select your drive's Desktop icon. Press COMMAND-I to open the Get Info window. Press COMMAND-SHIFT-4. Your cursor will turn into a crosshairs. Use it to select the part of the upper panel that displays the disk information. When you release the mouse button it will be automatically saved to your Desktop.
Reply to this post an upload the image by clicking on the Camera icon in the composer's toolbar.
Meanwhile, you can boot from your Leopard installer DVD and repair your hard drive:
Repair the Hard Drive and Permissions
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X. -
Hi Help Please
i have just linked an external hard drive to my airport extreme but it does not seem to appear in finder under shared !!!! any ideasi have plugged the hard drive into a usb router which in turn is plugged to to the AEBS it is visible in airport utility but then can not find it anywhere else!!
First, the drive must be formatted correctly to work at the USB port of the AEBS. That means a format of Mac OS Extended (Journaled) or FAT32. NTFS will not work.
You need to have a powered USB hub, even if the hard drive has its own power supply
Next, you may not have configured the Finder Preferences to display a connected hard drive. Please follow these steps:
o Click anywhere on the open desktop so that the Finder menus appear at the top of the screen
o Click Finder, then click Preferences
o Click the General tab
o Under the heading of "Show these itmes on the desktop", make sure you have a check mark next to Connected Servers
Restart both the AirPort Extreme and your Mac
Open Finder and check under the SHARED heading for your AirPort Extreme icon
Click on your AirPort Extreme and a folder will appear in the window to the right representing your hard drive
Double click the folder to mount the drive on the desktop
Hopefully, you are not planning to try to backup files using the Time Machine application, as this is not supported by Apple. -
Before Mac OS X lion install I had over 50% free hard drive space on new MBP, but now my hard drive is full without me doing anything! How do I fix this??? Or should I just revert to Snow Leopard???
Sounds like the Time Machine Local Backup. Try turning Time Machine Off in System Preferences to verify.
See: OS X Lion: About Time Machine's "local snapshots" on portable Macs
But, your real problem is
I forgot to mention that I tried to use Disk Utility to Verify Disk, but it cannot. I get red errors that say the MacHD is corrupt and needs to be repaired. It says that in order to do this I need to use the Disk Utility on the install disk, but Lion doesn't have one!
Boot into Lion's Recovery (Hold ⌘R on Boot), select Disk Utility and then select Macintosh HD and click [Repair Disk]
Tony -
Ibook g4 won't boot, but hard drive seems fine
I have a ibook g4,800mhz. osx 10.4.8
On start up i get the folder & question mark. I have tried the following.
1) i booted with an os install disk. disk utilities reported the drive was ok it but couldn't see a disk partition so disk first aid had nothing to do.
2) next i ran disk warrior which had the same probably, it could see the hard drive, reported that the drive was functioning, but saw no partition.
3) finally i gave up and reformatted the disk, and re installed an os. this worked for 48 hours at which time the problem came back.
4) i can put the laptop in firewire mode connect it to a desktop and access the hard drive. I can format the disk using apple disk tools, i can install an new os, but after all this it still won't boot from the internal hd.
5) I reset the pram. also tried starting up with the option key down .. no hard drive is visible when i do this.
So the hard drive seems to work ok. Two different disk utilities see the hard drive and think its functioning ok. OSx installer runs without complaint, but the &$%! won't boot from the hd.
Anybody got any suggestions?...this worked for 48 hours at which time the problem came back...
This is the time period that I was commenting on. If something was used during that time that corrupted the OS, it would cause the situation you are in.
If everything is perfect with the OS then something is wrong with the hard drive or the motherboard's interface to the hard drive. -
Hard Drive not detected through SATA, but it is through USB.
This week my hard drive seemed to crash, I got the file with the question mark and it wouldn't show up in disk utility. I went out and bought a new hard drive, popped it in and it too doesn't show up. I put my old hard drive in an enclosure and plugged it in through USB, and my macbook starts up just fine that way. What could be the problem?
dcbaros wrote:
Well I know the drive is fine because I can run it from the usb enclosure, but is the sata cable going bad a common problem?
Not common but I've seen it happen more than once so I wouldn't be surprised if that is what's going on with your computer. -
My iMac has a 1T hard drive and it is full ! So i look for the archives and there are6000 mails recovered from gmail and i can not erase them. Is it a virus?
What can i do ?It sounds like a runaway process is filling up your volume.
Boot in safe mode. First, disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable, and remove all aftermarket expansion cards. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including your login items.
Use a tool such as the one linked below to explore your volume and find out what's taking up the space:
OmniDiskSweeper - Products - The Omni Group -
I recently received a WD My Book Studio external Hard drive and am installing it but can't figure out what the difference between wd turbo installer 64 and wd turbo installer is. Can someone tell me. Thanks in advance for all your help.
Oh ok, well that was what the test said prior to reformatting the hard drive. Now, it doesn't find any trouble no matter how many times I run it. That's what has me so confused, everything seems to check out and yet...I can't do anything, not even install the software!
-
I want to install a new hard drive on my 2008 MacBook but do not have the instillation discs that came with my computer. Can I use instillation discs from a 2009 or 2010 MacBook? The hard drive I am planning to install is a WD Scorpio Black 500GB SATA 2.5'' internal hard drive.
Sometimes they do work - i've done it before. I have a late 2008 Macbook Uni and used the install dvd of my 2009 Macbook White and it worked.
Why not just clone your hard drive? It'll save you a lot of time doing a clone rather than doing a clean install.
Unless you're having issues with your old set up or your old hard drive is dead.
You can download Carbon Copy Cloner - install your new hard drive in a external usb enclosure (around $10) and clone fromt here then test it before you install it in your Macbook.
Once you've done the swap, you can install your old hard drive in the USB enclosure and use it as a backup drive.
Good luck -
My Seagate external Hard drive is saying that it is damaged I have another hard drive to transfer everything to but how do I fix this one?
You may not be able to fix it.
Some data recovery tools are non-destructive in their data recovery methods:
https://discussions.apple.com/docs/DOC-1689 -
I connected an external hard drive to the Time Capsule but can't get it to work.
And are you using a powered USB hub? The USB port on the Time Capsule is under powered, so you almost always need to use a powered USB hub, even if the hard drive has its own power supply.
-
I have a mid-2010 27" Quad Core i5 iMac running 10.8.3. Startup disk recognizes the primary hard drive as a startup volume but will not boot from it. Have tried zapping PRAM, ran disk utility. No errors reported Any thoughts?
My bad Eric. The startup preference recognizes the primary as a 10.8.3 startup volume but when u select it the system does not boot. I can only boot from my external backup drive
-
My external hard drives seem to be mixed up in lr4 and I don't know how to fix them
My external hard drives seem to be mixed up in lr4 and I don't know how to fix them! Help!
The file opened and cropped in photoshop was a camera raw file?
In File>Save for Web pick Jpeg from the drop-down -
I have Lightroom 4 and my hard drive is getting too full wiht pictures i have in lightroom. I want to move many to a thumbdrive and delete them from lightroom. what are the steps to perform this please ?
If you want to be able to view, edit and export from Lightroom you can move the files using your computer OS (explorer or finder) and update the folder location by right-clicking on the folder name in the LR Library. See fig 8 at the attached link:
http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
This will work when the thumb drive is connected.
If you really have no need to keep these files off-line in LR then simply move the files, select all the thumbnails in the LR Library and hit delete. Then choose remove. -
Had my Hard Drive installed by someone else but when the "Do u already have a Mac?" popped up they said no. is there a way to go back so I can restore frome my time capsule? Thanks for any info!
If you type in finder search "Migration Assistant" you should be able to restore from TimeMachine backup.
Maybe you are looking for
-
I am able to print but I am unable to scan. I am using a Mac OS X 10.8.5.
-
How can i stop icloud from downloading all my photos onto my iphone 4s each time I sync. Then, how do I delete them from my phone, there are no delete options. I'm slowly going crazy.
-
How can I autoupdate my itunes library from the music added to my computer.
-
HttpURLConnection got stack when trying to invoke
Hello im trying to perform http get request with HttpURLConnection when tomcat server is starting up the function is located in the servlet init method , but it seams that when it reached to the part it reform the connection the connection got stocke
-
Hi, I'm thinking of using BC for a new web development business and want to ensure that the support will be in place to help out. Anyone with wny experience with thisi