Hard drive sounds louder than expected when using a wacom bamboo tablet

i hace been trying to do some illustration work in photoshop CS5 using a wacom bamboo pen tablet
however as stated this seems to make the hardrive work louder then expected and i am worried that i could over heat and break my mac if i continue to work like this,
i dont even run any other programs well working (eg; safari or i-tunes)
i'm wondering if it is because my mac dosent have enough RAM to work both photoshop and the tablet at the same time and that if i add extra this would solve the problem
the tablet is powerd through a usb port

um i dont know how much ram it has ,but i havent added any yet so what it came with is the best answer i can give to that (sorry)
how loud would the fan sound as the noise i'm getting is a loud hum that starts up after a couple of
minuets of using my tablet and then goes away if i stop

Similar Messages

Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag). Also Premiere Pro CS5, playback is almost like watching footage in slow motion.

Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush, but only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag).
Also Premiere Pro CS5 playback is almost like watching footage in slow motion, Premiere Pro is installed on the main drive but the footage is on an external drive connected with USB 2.
I'm wondering if it is just a problem with the Mac USB drivers maybe not supporting USB 2 ? (Because I have also installed Window 7 on this same MacBookPro and tested the same software "Zbrush and Premiere Pro" And they both work perfectly on the Bootcamp Windows 7 install, and so its using the same hardware so it has to be the drivers right ?)
Any help would be great, Thanks
Darius

Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush, but only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag).
Also Premiere Pro CS5 playback is almost like watching footage in slow motion, Premiere Pro is installed on the main drive but the footage is on an external drive connected with USB 2.
I'm wondering if it is just a problem with the Mac USB drivers maybe not supporting USB 2 ? (Because I have also installed Window 7 on this same MacBookPro and tested the same software "Zbrush and Premiere Pro" And they both work perfectly on the Bootcamp Windows 7 install, and so its using the same hardware so it has to be the drivers right ?)
Any help would be great, Thanks
Darius

Equium L40-10Z hard drive clicks louder than usual/expected

Is a louder clicking hard drive a fault? It doesn't make weird scraping noises or anything, just the regular clicks but they are louder than I'm used to! I'd say a good 2-3 times louder than my old laptop. Is this something I should query with the shop (I only bought it yesterday) or is it part of the design? Thanks.

Hi Adam
Im an owner of 3 different notebooks and such similar clicking appears on one of my notebooks.
Its definitely a sound coming from HDD it appears since one year but the HDD and the notebook run correctly without any breakouts
But I have already noticed an HDD head-crash on my other computer. So you should be careful
Dont forget to backup your important data because this could be a beginning of the end of the notebooks HDD!
Bye

Can't erase hard drive on my PowerBook G4 when using the Installer CD

Hi,
I am trying to erase the hard drive on my old Powerbook G4 so that I can donate it. I followed the instructions by booting up the laptop using the Installer CD. Every time I select my hard drive in the Erase window and click the Erase button, it just checks the volumes and then it dims and nothing else happens.
After multiple failed attempts to erase the HD, I decided to quit the install CD and simply remove the HD altogether. I pressed the "Option" key in order to avoid starting up from the CD, but it is not working. I am unable to return to my original settings. All I see now is an arrow on the right hand side of the blue screen and a circle with an arrow on the left side. Pressing the arrow does not result in anything.
Any suggestions would be greatly appreciated.
Thanks!

Thanks for responding.
Yes, I tried everything yesterday. It only allowed me to verify the disk and not do any repairs. This computer has some major issues so I am not surprised. Since it was destined for recycling anyway, I decided not to waste any more time on it, so I removed the hard disk instead and am about to ship it off.

Database much larger than expected when using secondary databases

Hi Guys,
When I load data into my database it is much larger than I expect it to be when I turn on secondary indexes. I am using the Base API.
I am persisting (using TupleBindings) the following data type:
A Key of size ~ *80 Bytes*
A Value consisting of 4 longs ~ 4*8= *32 Bytes*
I am persisting ~ *280k* of such records
I therefore expect ballpark 280k * (80+32) Bytes ~ *31M* of data to be persisted. I actually see ~ *40M* - which is fine.
Now, when I add 4 secondary database indexes - on the 4 long values - I would expect to see approximately an additional 4 * 32 * 280k Bytes -> ~ *35M*
This would bring the total amount of data to (40M + 35M) ~ *75M*
(although I would expect less given that many of the secondary keys are duplicates)
What I am seeing however is *153M*
Given that no other data is persisted that could account for this, is this what you would expect to see?
Is there any way to account for the extra unexpected 75M of data?
Thanks,
Joel
Edited by: JoelH on 10-Feb-2010 10:59
Edited by: JoelH on 10-Feb-2010 10:59

Hi Joel,
Now, when I add 4 secondary database indexes - on the 4 long values - I would expect to see approximately an additional 4 * 32 * 280k Bytes -> ~ 35MA secondary index consists of a regular JE database containing key-value pairs, where the key of the pair is the secondary key and the value of the pair is the primary key. Your primary key is 80 bytes, so this would be 4 * (4 + 80) * 280k Bytes -> ~ 91M.
The remaining space is taken by per-record overhead for every primary and secondary record, plus the index of keys itself. There are (280k * 5) records total. Duplicates do not take less space.
I assume this is an insert-only test, and therefore the log should contain little obsolete data. To be sure, please run the DbSpace utility.
Does this answer your question?
--mark

Is it bad for a hard drive to click? because when ever i pick up my mac is mac a click noise near the hard drive and people are saying it is sms or something?

??

SMS means "Sudden Motion Sensor." Its purpose is to immediatly park the hard drive head to protect the drive platters from damage, whenever sudden motion is detected (like the laptop falling quickly toward the ground).
Read this for more info:
http://support.apple.com/kb/HT1935
I don't normally hear the click on mine, though I guess some people say it can be audible. Maybe it depends, like the way some hard drives are louder than others.

I have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, help

i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated

Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
Power down the system and restart with the drive connected, go to DU and see it it is seen.

When using Time Machine, if I delete items from my computer, will they still be backed up to access later on my external hard drive? In other words, when time machine backs up again, will it delete the files from the back up?

When using Time Machine, if I delete items from my computer, will they still be backed up to access later on my external hard drive?
In other words, when time machine backs up again, will it delete the files from the back up that I have deleted from my computer?

No, I do not believe so. Time Machine would keep all those now-deleted files in previous backups, and as time goes by those backups might be deleted if you needed room, but it would still keep one backup from each day in last month, as well as one from each week forever, as long as you don't start running out of room, then just the oldest would be deleted to make room if needed.
I use a backup drive about double the size of my drive to be backed up, so I would guess it will never get to the point where deleted files being replaced by new ones being backed fill up that drive to the point where backups actually have to get deleted.

HT4914 if you use iTunes match in order to create space and remove music from your hard drive, does that happen automatically when you subscribe and upload your music or is there another step to remove the music from your hard drive once you've uploaded t

if you use iTunes match in order to create space and remove music from your hard drive, does that happen automatically when you subscribe and upload your music or is there another step to remove the music from your hard drive once you've uploaded to iTunes match?

Welcome to the Apple Community.
iTunes match won't automatically remove content from your computer, if you want to do that you will need to do it manually yourself.

A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?

A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?

The beeps could be caused by something as simple as a loose internal wire or connection. If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose.

When I'm travelling I import photos onto my laptop's external hard drive and work on the images using virtual copies to develop them. When I get home, I want to import all the photos together with the developed virtual copies fromt the laptop's external H

When I'm travelling I import photos onto my laptop's external hard drive and work on the images using virtual copies to develop them. When I get home, I want to import all the photos together with the developed virtual copies fromt the laptop's external HD into LR5 on my PC desktop. But if I use the import button in LR I only get the original photo, not the developed copies. What am I doing wrong?

Since your current editing workflow is based around Virtual Copies there are no actual files containing the edit data. Therefore, you'll need to use the 'Import from another catalog' option ( see File menu).

New iMac. Flash drive is primary for OS and apps. I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files. Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?

New iMac. Flash drive is primary for OS and apps. I want to use my HD 2 (1 TB hard drive) for my bulky photo and music files. Can I direct iPhoto and iTunes to use the larger hard drive as the primary target when importing?

Yes. Unfortunately, I don't know the specifics because I don't use iPhoto anymore and I completely copied over 15 years of MP3 files recently when I installed 10.7. Needless to say, I have not opened iTunes since and probably never will again - not because of iTunes but because of my stupidity. I did have some of the files backed up but I hadn't backed up in a while.......anyway....
When I imported my CD's, I had them go directly to my external firewire. I can't remember exactly how to set it, but in the preference section of iTunes you can specify an import destination to any drive that's available to your machine. I did this with iPhoto as well way back at one point when I was using Tiger, but I don't remember the specifics on that either. I can't imagine they would have discontinued support for that feature since then.
Sorry I couldn't help more.

Hard drive sounds like it's about to take flight...won't boot at all.

Got one for ya. I just updated my G4 to 10.4.7 and now when I boot:
1) Button lights up
2) Hard drive sounds like a teen driving a Ferrari to prom in first gear.
- that's it. No screen, mouse, keyboard, start-up noise ( I so miss that wonderful "BONG!" noise, now. ) Nothing.
I am old-school PC newB by MAC so be patient w/me.
PS. how do you open the optical drive with no power to the keyboard?
tia,
[ARB1D3_[00L3R

You wrote: "Hard drive sounds like a teen driving a Ferrari to prom in first gear."Sounds like it has taken a hard failure. I suggest you begin troubleshooting using Step 1 of the the Procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

I am trying to upgrade my hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far, just before cloning may start and receive an "error 254" and can go no further. Any idea what this error is?

I am trying to upgrad the hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far throughj the process where its about to start cloing when I get a message " error 254". Any idea what that means and how do I get around this issue so I can use my new hard drive? Thanks for your input.
Vince

Connect the HDD to your MBP. Open Disk Utility>Erase and drag the HDD icon inrt the Name field. The format should be Mac OS Extended (Journaled). Click on the Erase button.
Then try the clone process again. You may use Disk Utility>Restore or a third party cloning application such as Carbon Copy Cloner or Super Duper.
Ciao.

How to backup an external hard drive plugged into a time capsule using time machine

How to backup an external hard drive plugged into a time capsule using time machine.
I want to move my itunes library from the mac HD to an external plugged into the time capsule, but I want to be sure this drive will still be backed up by time machine. I currentlly see no way to do this.

There is no way. You can connect the drive to your Mac and remove it from the Time Machine exclusion list. Then it will be backed up, but that will stop when you reconnect it to the TC. While it's connected to the TC, you can copy it manually to another AirPort Disk by following the instructions here (with a slight modification):
Using AirPort Utility to make a copy of the Time Capsule disk

Hard drive sounds louder than expected when using a wacom bamboo tablet

Similar Messages

Maybe you are looking for