Hard Drive Tray will not fit after attaching hard drive

(From Davin Oishi)
Issue: After installing the hard drive onto the hard drive tray, the tray will not longer fit into the Smart Storage hard disk drive slot.
Using hard drive tray screws from the legacy NSS2000, NSS3000, NSS4000, or NSS6000 may encounter this issue.
Resolution: Be sure to use the hard drive screws that are supplied with your Smart Storage device. Smart Storage ships with screws for both 3.5" SATA drives and 2.5" SATA drives.

If they are still on your Mac's drive then you should be able to add them back into iTunes via File > Add To Library

Similar Messages

Organizer will not open after I tried backing up photos on external hard drive on Mac. Editor opens, but not Organizer. This is a repost of a problem first reported 10 days ago.

Organizer will not open after I tried backing up photos on an external hard drive on Mac. Editor opens, but will not launch Organizer. Have tried clearing the catalogs, but nothing works. This was first reported 10 days ago. Had to be out of the country for a week - without photoshop working-- and now I'm back with the same problem. Can someone please help, or do I dump this and try to get some help just reloading the program?

jnrmendonca
It had 4 years of photos and videos on it.
To what did your camera record those photos and videos - camera's internal memory, inserted memory card, other?
Any remote chance that the latter may still exist for you to use to download the camera files to your new external hard drive?
ATR

When I updated my MAC I lost all my movies from iTunes. They are still on my hard drive but will not reappear after I reset my preference in advance section. How do I fix it?

When I updated my MAC I lost all my movies from iTunes. They are still on my hard drive but will not reappear after I reset my preference in advance section. How do I fix it?

If they are still on your Mac's drive then you should be able to add them back into iTunes via File > Add To Library

PS CS4 will not open after carbon copying drive to new SSD on MacPro

PS CS4 will not open after carbon copying drive to new SSD on MacPro. Pop-up windows inform me that the scratch disk is not available. I would appreciate any advice on how to rectify this problem.
Thanks
marco

Thanks avanishdivya.
I was hoping to avoid that route, but guess it's all I can do.
Thanks for your quick response.
Do you know if it is a Carbon Copy Cloner issue or just the way Adobe sets it up?
For future reference, where should the scratch disk reside? I heard it should not be on the boot drive?
marco

My CD/DVD drive tray will not stay closed

I have a G3 dual USB iBook and my CD/DVD-Rom tray will not stay closed. Any idea's how to fix this?

OK .. I'd been struggling with this problem for a number of weeks - on a friends iBook ( I'm not sure of the Factory Config - but it is a G4).
Anyway - I've scoured these files on the Apple Support system with NO luck at all - and a number of other forums and support sites... that is until I came across a mention of resetting the PMU (Power Management Unit). This URL was given: http://docs.info.apple.com/article.html?artnum=14449#faq6 .... which of course leads right back here!
But I read all the info and then sought out the appropriate method for a PMU reset and did it. VOILA! It worked.
Now ... I would suggest that this would be a good time to run a Disk Utility (like Disk Warrior) to check out the Disk and System.
But .. the CD Tray remains closed now. So - I hope this gets you all back in business.
PowerBook G3 BronzeKey Mac OS X (10.3.9)

How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
Two things:
1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......". I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
Obviously it will fit.
What am I doing wrong, all of a sudden?

Hey ryclark,
Thanks for responding. Something else is going on here.....
Here's what I re-replied to our friend...
Thanks for the response.
When I built this computer last Nov/Dec, it was built with the second
fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's running
Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard
drive space. It is set up with 64 bit. I had been using Audition CS3 for many
years and even go back to it's origin: Cool Edit and Cool Edit Pro. My
learning curve was minimal, sans the CD burning, which I used other software
for which is now antiquated, so I need Audition for this. Between this and
IZotope 3 I've repaired and improved many a recording. All-in-all extremely
useful software.
As for the idea "to burn it anyway", well the error message comes up and
that's it - if I "X" out of that message and try to burn again the message
comes back - so Audition will not let me. It is convinced that this file is
longer than it really is, but only when I add track marks to it!
There are only 11 tracks.
I was able to burn a CD of this same file but without all the track marks,
so the same exact file length/size will burn, only as the one track.
I've also succeeded in burning other WAV's , both greater and smaller, with
and without multiple track marks, without issue. Of course all with less
than the CD's max. capacity.
This problem seems to be with this one file. I've even re-made/re-recorded
the file from scratch with no change. There's something else going on here
that I can't put my finger on. (I am "recording" LP's and making personal
CDs of them)
Also, only from time to time, I have another error after burning a CD that
states it could not verify the CD. For this I assume it is the blank rather
than AA? The first might burn without issue and with the second burn I
get the error. It is near the end of a stack of blanks, so.....
As for the need to "mark the end" of the file makes a lot of sense but of
all the other CD track-marking software I've used, none needed one to do
this, but this IS Adobe after all.
You'd think there might be a smidge of intuitiveness with Adobe, but maybe
not.
- Mark
In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time,
[email protected] writes:
How to solve Audition CS6 error "The amount of audio to burn will not fit
on the CD........."?
created by ryclark (https://forums.adobe.com/people/ryclark) in
Audition CS5.5, CS6 & CC - View the full discussion
(https://forums.adobe.com/message/6605916#6605916)

Since I have upgraded to ios7 my internet banking page will not fit the screen. Before updating I enlarged the page by using the *2 button in the bottom right hand of the screen, there no longer is that option?

Since I have upgraded to ios7 my internet banking page will not fit the screen. Before updating I enlarged the page by using the *2 button in the bottom right hand of the screen, there no longer is that option?

Install or Reinstall OS X from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
      the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
           because it is three times faster than wireless.

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

My Itunes will not start after the latest update. I keeo getting error message tEventType : InPageError P1 : c000009c P2 : 00000003 . I have tried to reinstall but no joy. Any advise?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Iphone 4 not recognized and will not sync after latest itunes update. I have done all trouble shooting and uninstalled and reinstalled itunes to no avail.

iphone 4 not recognized and will not sync after latest itunes update. I have done recommendedl trouble shooting and uninstalled and reinstalled itunes to no avail. Can I go back to earlier version of itunes or restore computer to fix?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

System preferences will not open after Yosemite 10.10.2 upgrade

system preferences will not open after Yosemite 10.10.2 upgrade. What should I do?

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

DVD will not pause after burning

The DVD I create with iDVD will not pause after burning. I've tried various DVD players with the same result. Everything else about the disc seems fine. I'm using a DVD-R disc, with iDVD 5.0.1
I have burned DVDs in the past without this problem! I seriously need advice, thanks!!

Hello artisshiny,
if you feel that you have performance issues on your Mac in general (and iDVD in particular), try to do the following:
1. find the file com.apple.iDVD.plist and trash it, then empty the trash.
2. free up some space on your hard drive (20 GB should be free when working with iDVD)
3. repair permissions with Disk Utility (Applications > Utilities) and reboot.
4. run software like DiskWarrior or Macjanitor
hope this helps
mish

Mac Pro will not restart after installation of Lion. Help!

Mac Pro will not restart after installation of Lion. Help

Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

My cd tray will not open

My cd tray will not open the only way I can open it is by using the terminal commands "drutil open" and "drutil close"

Is there a disc in the drive?
Are you saying depressing (for several seconds) the F12 key does not open the drive?
You can add an Eject Item to the Menu Bar
1. Open a Finder window and navigate to /System/Library/Core Services/ Menu Extras.
2. Double-click the Eject.menu item in the Menu Extras folder.
The Eject menu item will be added to your Mac’s menu bar. It will have the eject icon, which is a chevron with a line below it. If you click on the Eject menu item, it will display all of the CD/DVD drives attached to your Mac, and provide the option to ‘Open’ or ‘Close’ each drive, depending on its current state.
 Cheers, Tom

Project will not fit

Hi all
I hope someone has a solution to this one. I made a movie in FCE that was over 2 hours and found out the hard way that I would need to cut it down or burn to dual layer. Well I cut, and cut, and cut and now it is 1:43 and still the program tells me that it will not fit on a single layer disc.
Any ideas?
Jon

One way around the two hour (or slightly less) time limit in iDVD is to go to the "Project" menu item, click on "Project info" and change "Media type" to "8.0GB (Double layer)". Burn to a disk image and mount the .IMG file on the desktop. The resulting VIDEO_TS file will be greater than 4.3GB and too large to fit on a single layer blank DVD. The file can be compressed to fit a single layer blank DVD by using DVD2ONEX or DVDRemaster. Both programs are shareware at very nominal cost and available for evaluation on VersionTracker.com Both do a good job of preserving visual quality while compressing the size (not the length) of the VIDEO_TS file. This is a very useful workaround for those occasions when a project is too long. The "Media type" option in "Project info" only appears when you have a Superdive that can burn dual layer discs. I have an external Pioneer K05 (dual layer capable and Apple shipped/supported in Profiler) attached to my early G5 iMac. The "Media type" option disappears if I disconnect the K05. Why not just burn to a DL disc? Two reasons: the discs don't work well in some DVD players and DL discs are $2 to $3 apiece mail order.

Glide pad will not work after formatting g60-630ca

Can somebody help? my glide pad will not work after downgrading to xp. The pad works itself for the mouse but then the scrolls on the side will not. Please help...

You need the driver. It is a Synaptics Touchpad and you can use this driver:
Synaptics
Here is a link to the General XP Downgrade guide which has a link to all the drivers you need under "Moderate models:
XP Guide
The touchpad is hard because Windows does load a basic driver so it does not appear with an error in Device Manager, but the "real" driver is needed for advanced features like scrolling. Be sure you have all the needed Xp drivers, by the way.

Hard Drive Tray will not fit after attaching hard drive

Similar Messages

Maybe you are looking for