Hard Drive Upgrade from 5400 to 7200 RPM

Well my logic board died and i have gotten that replaced and now i need to upgrade my hard drive from 5400 to 7200 rpm. I just dont know how to replace it. I have the memory upgraded so im good there just need help upgrading the drive
So how would i replace it?
Please help
thanks
and if there are any websites that could help me upgrade my HD

It is easy....
http://www.ifixit.com/Guide/MacBook-Core-2-Duo-Hard-Drive-Replacement/514/1

Similar Messages

Ello, I changed my Imac hard drive which no longer worked. I installed a hard drive Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want

Hello, I changed my Imac hard drive which no longer worked. I installed a hard drive
Western Digital 500 GB 7200 rpm SATA3 WD5002AALX 32M Black. Sometimes I see the hard disk in the utility on the Starter CD, but access seems very slow. By cons when I want
install OS X 10.4.2 on the hard drive, I do not see the disk. What is the problem?

Thanks for the help
I started on the installation CD OS X 10.4.2, I used Disk Utility
to partition the disk according to the document that you have proposed. unfortunately
I have not succeeded. When I partition the disk, even if I called it Macintosh HD, it
does not keep the name and it shows disk0s3 instead. I did an erase on disk.
When I mount the disk it tells me that I must repair. When I tried to repair, I got
the following message:
Volume check failed
The underflying task reported failure on exit
1 HFS volume checked
1 volume could not be repaired because of an error.
I also had a message:
Invalid b-tree node size.
Note: The disc is new, but it has already been formatted on a computer Imac 27 inch 2011 OS X Lion.
I used a USB 2.0 to SATA cable to adjust the formatting.
What to do to fix it?

Need Detailed instructions to install new hard drive & upgrade from Vista Home to Win7 Enterprise

Hi folks,
I have this laptop machine:
Lenovo 3000 G530 4446-23U Laptop Computer - Intel Pentium Dual-Core T3400, 2GB DDR2, 160GB HDD, DVDRW, 15.4" WXGA, Vista Home Basic
I need to install another hard drive and I also want to upgrade to Win7 Enterprise Edition while doing the rebuild.
I am very nervous about doing this as I upgraded a W530 from Win7 basic to Win7 Enterprise and ran into all kinds of drive issues. And I thought that would be about as straightforward as you could get, but it a far cry from that.
I do not want to have to go through that again - I still don't have everything working on it.
Can someone please tell me the precise steps to take to do this upgrade and how to ensure that I obtain ALL the drivers for EVERYTHING on the laptop and how to ensure that all those drivers are correct and exactly how to install them.
If there are other issues associated with upgrading from Vista Home to Win7 Enterprise, please advise of those and the solutions.
Thanks very much.....
Gus

hi gmercanti,
Welcome to the Lenovo Community.
The easiest way to upgrade Vista to Windows 7 is to run the Windows 7 Installer inside WIndows. Follow this guide for instructions. After upgrading, you will need to install the Windows 7 Drivers for Lenovo G530 4446 via http://support.lenovo.com.
Spoiler (Highlight to read)
Let me know if you get any errors.
Cheers
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Hard drive upgrade for Mac Book Pro from 11/2007 with 120GB

Hello
My hard drive is full after 2 years. I contacted an apple reseller as Apple store would not advise on it, and they told me that to avoid overheating, I should not exceed 160 GB for a new hard drive. I was surprised as a 250 GB hard rive was optional when I bought my MBP. I was more looking at 500 GB but I am worried about overheating as my laptop tends to heat up a lot with the current drive already.
How big a hard drive can my MBP accommodate (I understand 500 GB)? Will it create more heat which can not be dissipated by the MBP as Apple reseller told? Does 5400 or 7200 rpm change the heat levels (I understand not necessarily)?
Thanks for your answers, may help me avoid buying a new laptop.

Welcome to Apple Discussions!
I have the 17" MBP from September 2007, and I ordered mine with the optional 250 GB drive, which is a Fujitsu 4200 RPM model. My Mac runs perfectly well on this drive, and it never gets hot.
Since so many people have successfully put 500 GB drives in their Macs, I think the Apple reseller is misinformed. There may be a decrease in battery life for the 7200 RPM models, but I have read many posts where people report that the drives work perfectly well and that there was no heat problem.
I replaced the 30 GB drive in my iBook with a Western Digital 120 GB drive, and have had no issues with it. The drive does make a slightly different and louder whirring noise if you listen carefully. My only regret is that I did not install a 250 GB drive instead of the 120 GB.
Western Digital and Seagate both make 500 GB drives that should work perfectly well in your machine. Some people have reported problems with the 640 GB Western Digital spinning up and down too much, so you may want to avoid that one. If you go with the 500 GB Seagate, be sure to select one without the G-Force feature, as it is a built in type of sudden motion sensor which can conflict with Apple's built in Sudden Motion Sensor.
Good luck!

2011 Macbook Pro Hard Drive Upgrade?

Hi. I am looking at upgrading my 2011 Macbook Pro hard drive. I want to get a 7200 RPM hard drive. I have been looking on Newegg and doing some research, and from what I can tell, the 2011 Macbook Pro uses a 3.0GB/s interface. If I were to buy a hard drive that has a different interface, like a 6.0GB/s interface, would it be compatible? Does anyone know the sizing for an MBP hard drive?
Also, it doesn't matter who the manufactorer is right?
And finally, does anyone have any recommendations?

But in my Honest opinion I don't think you'll really notice the difference between the 5400 and 7200 rpm unless your rendering large video files or transfering large amounts of data to an external or USB drive. But again you'll be limited on the speed of the external connections that your transferring too... If you really want to notice a difference, get the SSD with a Sata 3 or 6.0GBs connection speed. But the difference between a 5400 and 7200 rpm drive for normal tasks is almost negligable, you probably won't even notice the difference, but if you get the SSD you'll definately notice a difference in boot time, transfer speed, video rendering speed, copying speed of large files, etc...

Hard Drive upgrade

I'm considering a hard drive upgrade but i dont know crap about them. I went over to newegg because i heard it was a good site and found this one......
"Western Digital Scorpio Blue WD5000LPVT 500GB 5400 RPM 8MB Cache 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive -Bare Drive"
The only problem is, I dont know wheter it is compatible with my Early 2009 13 inch macbook pro..... Should I go with this one or are there better ones out there? I'm not really worried about price. I was aiming to get a 500gb. Thanks.

It is compatilbe if it's a 2.5" notebook SATA II 3.0 Gb/s model. Take Csound1's advice. If you buy a WD drive or any other makers' drives do not purchase any "green" drives as they don't work well in Macs.
If you want better performance get a drive rated for 7200 RPM with as large a cache as possible (typically 16 MBs.) Other makers to consider include Hitachi, Seagate, and SamSung.
If you want faster speed consider the Seagate XT500 hybrid. Or visit OWC and look into their DataDoubler that enables you to replace the optical drive with an SSD (or another HDD.)

Hard Drive Upgrade in Vista

I have an IBM T60p with original 90 gig HD. I spent a weekend trying to upgrade to a larger capacity drive. Downloaded several commercial programs. None of them worked properly. I finally found a way to use Vista to complete the task. This procedure works, have a new 320 gig WD 7200 RPM drive working correctly in my computer. Hard drive Upgrade in Windows Vista
This procedure was used on an IBM ThinkPad T60p with 90 gig SATA HD.Machine was upgraded with a Western Digital 320 gig BEKT SATA drive (Scorpio Black).
Before you start:You need to change the BIOS setting for Windows to recognize your new drive.
Reboot and enter BIOS
Select “Config” => Serial ATA (SATA) => SATA Controller Mode Option: => COMPATIBILITY
Save and exit
Review Boot priorities to enable the Boot from CD option
Have a copy of Windows Vista on CD; the version does not matter, you will use this only to boot from CD.
See WD product description at following website
http://www.wdc.com/en/products/products.asp?driveid=477
You will need an external USB hard drive to back up your existing hard drive.
It needs to be large enough to back up your existing drive.
Plug in the drive, Windows should recognize it.
Format the external hard drive so it is clean.
Backup Existing Drive
Back up drive C to the external drive using Windows Vista.
Go to Control Panel => Backup and Restore Center
Select the “Back-up files or your entire computer” option
Select “Back up computer
”Windows displays “Where do you want to save the backup”
Select “On a hard disk”
Windows displays hard drives available,
Select the drive you just plugged in
Click “Next”
Review the screen “Confirm your backup settings”
Windows displays “Local Disk (C) (System)” in the bottom window.
Click “Start backup”.
Backup will take 1-2 hours.
When completed, you have a complete image of your drive created by Windows Vista on the external HD
Install new Hard Drive
Shut down the machine.
Install the new hard drive per manufacturer instructions.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-62826
Boot the computer using the Vista CD.
Once files are loaded, Vista will open
Click “Next”
Click “Repair Your Computer”
Windows displays a window showing operating systems available, the window will be blank.
Click “Next”
Windows displays “Choose a Recovery Option”
Select “Windows Complete PC Restore”
Windows displays the saved image from your external drive
Click “Next”
Windows displays the restoration information
Click “Finish”
Remove the Windows CD
Restore will take 1-2 hours
Set up the new drive
After restoration, the system will reboot and you should be at the Vista Log In screen.
Log in normally and check to be sure your programs work.
You now need to tell Vista you have a new drive, and resize the partition to the capacity of the new drive.
Tell Windows to recognize the new drive
Start Menu, L click “Computer”
Drive C displays the stored image with the same capacity of the old drive.
R click on drive C => properties
Select the “Hardware” tab
Highlight drive C
Select the “Properties” tab, bottom right
Click on “Change settings”, bottom left
Click on the “Volumes” tab
Click the “Populate” tab
Windows will now populate the table with the settings for the new drive.
Save the settings and Reboot the computer.
Windows will now recognize the new higher capacity drive.
After reboot
Start Menu, R click “Computer”
Select “Manage”
In the L window, select “Storage” => “Disk Management”
Disk “0” is your new drive
Select Drive C
R click Drive C, select “Extend Volume”
The Extend Volume Wizard will open
Click “Next”
Click “Finish”
The new drive capacity is now operational.
You will now have two partitions, one for Windows, one for programs and data.

I'm also interested if anyone knows. I called the Square Group in London (Nex Oxford Street) but they said they'd get back to me ... but they didn't ...

Portable external raid - should I get 5400 or 7200 rpm?

Hi,
I'm in need of a portable external raid 1 for live data protection. I do illustration work in photoshop and I use bridge to access and view files and reference. I would like to write all my files and read all my files from an external raid 1 and I am wondering if I should get a 5400 or 7200 rpm setup.
My concern is read and write speeds.
My portable setup is a mbp 2.16 intel core duo. I'm thinking of getting the g raid mini 2.
Thanks in advance

Thanks for the response.
To clarify my question though -
1. I'm wondering if either will be fast enough to work off of - I'm planning on keeping the internal drive clean and all data would reside on the raid(so no incremental backups will be needed).
2. will the difference between 5400 and 7200 be worth the difference in price - ie. lag time or a noticeable speed difference.
Thanks

How can I browse T.M. backups made BEFORE internal hard drive upgrade?

Hi, all. I have googled and googled with no info on my particular situation. Maybe one of you can help. Here's hoping...
I have a MacBook Pro and use Time Machine to back up to a Firewire hard drive. I do not back up my System and Applications, just files. Consequently, when I recently upgraded my internal hard drive I restored all my data and settings from the original internal hard drive (not the Time Machine).
From there Time Machine began making NEW backups of the NEW hard drive, no problem, but I cannot browse the backups of the previous internal hard drive. Is there any way I can get Time Machine to recognize all of these backups as existing from the same machine and let me browse back beyond the internal hard drive upgrade?
Any help is greatly appreciated!

I think you have to browse them separately, but you should be able to do so by right-clicking (control+click) on the Time Machine icon in the dock or by holding the option key when clicking the icon in the menu bar.
Choose "Browse other Time Machine Disks" and you should see the old series of backups.
~Lyssa

Hard Drive Upgrade Pain and Warning.

Well,
I have recently upgraded my HD to a Western Digital 500GB (WD5000BEVT) and although it is running ok I have noticed a few issues:
-Very brief lag (1 - 2secs) on most things. For example, right click on an item to bring up a menu will result in spinning wheel for a few moments and then the menu.
-At time of lag/freeze a noticeable sound of the HD spinning up before the action will be performed
Computer boot up and shutdown time seems seem longer than with pervious "official" HD
-I also noticed when I was transferring all my music (43GB) onto the computer the system's responsiveness while using applications was much faster.
Anyone who has had these issues and solved it is more than welcome to comment (although not with the Hdapm solution as 1: I have tried this and couldn't get it to work and 2: I would rather like a permanent fix that is not software dependant) and I though I would post to warn others there is a compatibility issue with this drive. I am trying to get in contact with WD but still waiting to hear back. I do not think this a faulty drive as many other people are having the same problem with other WD hard drives all from the Scorpio Blue/Black line.
Now after all this fuss I am thinking of replacing the HD with another different 500GB. I would like to know what the official apple 500GB 2.5 SATA drive is that they use in the Macbook Pro's but have not been able to find out via the internet and was wondering if anyone here has any info? Also do apple change the firmware of the drives they use to make them work better with Apple notebooks / OSX and is this why they have an apple logo on the drives? Finally is it possible to purchase the "official" drives anywhere and is it really worth doing this?
Sorry for the long rant and I look forward to hearing back from you.
Regards,
BTD

I have a 15" MacBook Pro from 2007. Quick Specs: 2.2/2GB/10.5.8
I recently upgraded the 120 GB hard drive to the Western Digital 500GB (WD5000BEVT)
The drive appears to work fine, but there was a massive performance issue: lots of beachballs and lags in any task that required disk access. sequential read/write (copying big files) seemed to be ok. My system was very slow.
the problem was best described here:
http://discussions.apple.com/thread.jspa?threadID=2292861
From a few other posts on this topic:
Reliable and rugged - WD's ShockGuard technology protects the drive mechanics and platter surfaces from shocks. WD's SecurePark™ parks the
recording heads off the disk surface during spin up, spin down, and when the drive is off. This ensures the recording head never touches the disk >surface resulting in improved long term reliability due to less head wear, and improved non-operational shock tolerance.
Using drives with a built in equivalent of the MacBooks Sudden Motion Sensor can cause problems. You may want to try to disable the Sudden Motion Sensor in your MacBook and see if that helps:
http://support.apple.com/kb/HT1934
My Experience:
Disabling Sudden Motion Sensor, then resetting the PRAM (press command-option-P-R at startup) helped a huge amount. This is noticeable as a user, but also through XBench:
Before disabling sms: XBench score of 21.73. After disabling sms AND resetting PRAM: 119.88. I just did this a few hours ago, but I think that it fixed the problem.
hdapm seems to do nothing to help this problem, but there might be a different problem with 3rd party hard drives in newer MacBook Pros. There seems to be some confusion in Apple's message boards about this.
Message was edited by: areadan

Hard Drive Upgrade - Incorrect Capacity Shown In Disk Utility After Installation

I have an older model Macbook Version 2.1 that had an 80GB hard drive installed. I have just installed a Western Digital Scorpio Black 500GB internal hard drive upgrade and successfully cloned my data over using Carbon Copy Cloner. The problem I have encountered is that only 98.1GB of capacity is shown in Disk Utility for the new hard drive. After starting the computer using my bootable copy via an external USB drive, I formatted the newly installed 500GB drive with the appropriate Apple formatting (e.g. GUID and Mac OS Extended Journaled) but it only shows 98.1GB of space available on the new drive. I was able to successfully clone the information from my bootable back-up of the old drive to the new drive but I just don't have the full 500GB capacity available to me.
What should I do? Is this a problem with the new hard drive or is there something I need to change on my Macbook to "see" the whole capacity of my new drive?
Thanks for your advice,
Dave

Hi Andrew,
When I formatted the new drive did it with 1 partition and it displays a TOTAL of 98.1GB free space (both in Disk Utility and About This Drive). As far as I can tell, the Macbook is treating the new WD drive as if it is only a 98.1GB drive rather than the 500GB drive that it is.
Thoughts?
Dave

IPod sync problems after hard-drive upgrade/change

Hello all,
Can anyone PLEASE help?
I have just had my hard drive upgraded/changed from the original 640GB drive to a new 2TB drive. I've also had an additional 4GB of RAM added to now give me 8GB RAM.
Absolutely everything else seems to be working fine (unusual for me and I'm often at the end of bad luck in such circumstances). The only thing I'm having problems with is syncing my iPod Classic with iTunes. Incidentally, I have the latest version of iTunes and my iPod software was up to date the last time I checked.
Before I go further, my system specs are:
iMac
24-inch, Early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X Mountain Lion 10.8.2 (12C60)
When I connect my iPod Classic, the iPod screen initially shows 'Synchronisation in progress' (or whetver similar wording it actually is)... but this is just very briefly. It then indicates "Connected", and that's the way it stays and doesn't change at all.
It takes time to actually show up in iTunes, and when it does, I now have to very quickly click the iPod button (to bring up the iPod screen on iTunes) before the pointer turns into the spinning beach ball.
Now, it hangs... and hangs... and hangs... and hangs.
During this, I notice that "Manually manage music and videos" is ticked (which I didn't have ticked before), and also 'Enable disc use' is also ticked, although greyed out.
Occasionally, the spinning beach ball will disappear and the pointer will return, but this is very very briefly and I have a split-second to try unticking - first - the "Manually manage music and videos" box and then - later, if I'm lucky - untick the 'Enable disc use' box. However, on the odd occasion I've managed this, I haven't been able to go further except for two occasions when I managed to click "Apply". The iPoid on those to occasions started to update... but went nowhere... it just did nothing.
When the thing finally just hangs and hangs, I eventually have to 'force quit' iTunes and unplug the iPod without first ejecting. There was one other occasion when I managed to - split-second when the spinning beach ball disappeared - to click "eject" and the iPod succesfully did so.
There were a couple of occasions in the past when I had trouble with my iPhone and was told to delete/trash the iPhone photo cache folder. Remembering this, I tried this for the iPod (iPod photo cache) and it made no difference... same situation.
I did notice on one occasion at the beginning of all this that when I managed to unplug my iPod from iTunes, all the album covers were missing from the iPod (although still in iTunes). This was long before I tried deleting the iPod photo cache folder though.
Any help would be greatly appreciated.
Best regards
BionicDan

First things first the spinning beach ball is usually an indication that Search is going nuts.
Turn off Search entire Library by clicking on the downward pointing arrow to the right of the Magnisying glass and untick Search entire library.
Is your music still in iTunes on your new hard drive or is it only on your ipod?
If it is in your itunes then you should be able to plug in the iPod and uncheck Manually Manage music and sync
If the music is only on the ipod connect up as above click on the device and Drag all the music from your device to the library. then you can uncheck manually manage music and sync as normal

Time Machine confused after iMac hard drive upgrade

Here's the deal. I had my 24" iMac internal 250-gig hard drive upgraded to a 1-Terabyte drive. Tech guy cloned them with SuperDuper. New drive booted right up and works great. My question is regarding Time Machine, which I have set up to backup to an external drive. I assumed because old drive was cloned to new drive, Time Machine would think it was the same drive and just keep backing it up as it always has. But what happens is Time Machine just keep saying "processing" and nothing ever happens.
Is there a way to tell TM to start backing up the new drive as it always did or do I need to delete my current (1 1/2 yr. old) TM files and let it start from scratch again? I really don't want to do that. Any ideas?

As V.K. says, that procedure may or may not work.
The reason for the long preparing stage is that TM, seeing a different drive, is examining every file and folder on your system, and may do a full backup of your entire system.
Download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. You'll probably see a message about a UUID error referencing your internal drive --that means TM doesn't recognize it as the same one it last backed-up.
Then you'll probably see one about a "deep traversal." That means TM is looking at every file and folder on your system to see what needs to be backed-up. This takes quite a while, of course, and you won't see anything being backed-up (xx MB of yy GB) until it's done.
If TM does perform a full backup, it may have to delete a lot of your old backups to make room for the new one. If it can't delete enough, it will fail.

G40 2384-A9U Hard drive upgrade

I updated the bios to 1.21 which seems to be the latest bios 2006. The hard drive upgrade listed for purchase 2004 was an 80G. I was hopeing that I could put a larger dirve in because the newer bios was 2 years past the hard drive upgrade listing. I tried a 250G but it does not seem to be recognized. Does anyone know what the max hard drive size the latest bios supports?
Solved!
Go to Solution.

I first entered CMOS (setup) and under security, and set the desktop to disable. I was able to transfer the data to the 250G from the 40G using Ghost 2003 and selecting the image setting -IB (Image Boot). I was fortunate enough to have a floppy drive on the notebook (G40 2384-A9U). I attached an external USB 40G drive to the notebook, booted with Norton's Ghost 2003 boot disk created with USB support enabled. I went into options and selected Image Boot under the image tab and then copied the existing 40G drive to the external 40G USB drive. I then replaced the 40G drive in the notebook with the 250G drive, booted with the Norton Ghost disk and selected the image boot again and copied the 40G USB drive to the new 250G drive now in the notebook. I went back into the CMOS (setup) and put the security for the desktop back to normal. The only thing different seem to be the utilities are missing if you hit the IBM access button. I notice that when you disable the security for the desktop in CMOS, you will see an unpartitioned space of almost 2Gigs. This appears to be where some of the 4 sectors that lenovo uses to hold the boot information and probably their utility programs. The norton -IB switch does seem to get the boot sector information but not the utility portion of the unused area. The result is the unused space is reduced to only 2 megs on a 40 Gig drive and shows up as 4 megs on the 250 Gig drive.

Spinning beach ball after hard drive upgrade

Im running a macbook pro i7 2.2ghz 8gb ram version 10.6.8 SL
I recently upgraded my 128gb ssd to a 512gb ssd drive. I cloned the drive to new drive and ever since then, I get the spinning beach ball very often whereas I never got it prior to the hard drive upgrade. Is there anything I can check or do to eliminate the freeze ups? It is VERY annoying. Or do I just need to do a fresh install on the new hard drive.
thanks in advance

Did you properly prep the drive first:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Hard Drive Upgrade from 5400 to 7200 RPM

Similar Messages

Maybe you are looking for