Hard Drive Upgrade Questions.

I have an intel core 2 duo mac with an 80 gb hard drive. I'm considering upgrading to a 250gb hard drive, though I've read that the process is very difficult. How difficult is the process exactly and is it possible for a non-professional. I recently upgraded my macbook pro from 80gb to 250gb, though I believe that I voided the warranty by opening it. Also, would upgrading my mini void the warranty? Is the hard drive in the mini the same as the hard drive in my Macbook Pro?
Thanks!

When you replace the drive with a new, generic, one, you will usually need to reformat the drive. You can do that by booting the system to the original install disk (or a retail copy of MacOS) and then selecting Disk Utility from the Utilities menu when the installer appears. From there, the new drive should be detected, and if it isn't partitioned correctly (Apple scheme for PPC systems and GUID scheme for Intel) and formatted correctly (MacOS Extended (journaled) in most cases, you can do so from there. After that, you can either install MacOS from the installer itself, or if you have a fully functioning and bootable external drive with MacOS correctly installed for that system, you can use a utility such as SuperDuper! or CarbonCopyCloner (both downloadable from www.versiontracker.com) to clone the external to the new drive.
If you simply install MacOS, then when complete you can boot to the new drive, and run the migration assistant to pull your data etc from an external if you wish. Personally I don't like to migrate software or settings, preferring instead to reinstall and configure from scratch to avoid possible issues.

Similar Messages

Mid 2009 MacBook Pro 13 Hard Drive Upgrade Questions

I bought an upgraded hard drive for my mid-2009 MBP 13. I've done some reading and it appears that my model of MBP shouldn't have drive issues, but I still have a few questions that I'm hoping someone will answer. Perhaps this will all boil down to a little knowledge is a dangerous thing. That is, I may be worried without good reason. If so, I apologize ahead of time.
MacBook Pro 5,5
2.26 GHz
4GB RAM
10.6.3
Firmware version is: EFI64
The stock drive is a TOSHIBA MK1655GSXF (160 GB):
The new hard drive is the Western Digital Scorpio Blue 500 GB 5400 RPM drive.
I noticed that the temperature seemed to spike after installing the new drive. I didn't get the temperature of the hard drive before I took it out, but the CPU was consistently around 170 degrees Fahrenheit and the fan was in the 2,800-2,900 RPM range.
After putting the stock drive back in the MBP, the temps are consistently 142-145 degrees F for the CPU and 95-97 degrees F for the hard drive. The fan is right around 2,000 RPM.
I've read a bit about outrageous load cycles and just wanted to check the numbers.
The WD Scorpio Blue around 4,055 after 27 power on hours.
The stock drive was at last count, at 206701 after 2215 power on hours.
The machine is doing comparable things, downloading podcasts, Time Machine backups, browsing, etc.
The general questions, I have are:
Is the temperature supposed to spike like that when handling a larger drive?
If so, what is a reasonable range? I know I don't have the temperature of the new drive, but if I knew what to expect, I guess I would be more confident putting the new drive back in and not returning it.
What's a normal/healthy/reasonable (don't really know the term I'm grasping for) load cycle to see? I divided the load cycles by the number of power on hours and get around 150 for the WD and 93 for the Toshiba. Are either of those outrageously good or bad? I haven't been able to tell in my reading.
The bottom-line questions are:
Am I just overreacting based on what I've read? Or, is something not kosher and should I return the new drive and get something else? Should I try hdapm or something? If I should return the drive, any recommendations?
I've talked your collective ear off, I'm sure.
Thank you in advance for your responses.
Cheers,
Rob

For what it's worth I've put aftermarket 7200 rpm hard drives in 2006 and 2008 15" MBP's and also a WD Scorpio Black 320GB in a 2009 13" MBP 2.53GHz and have had no changes in cpu temp or fan speed. Your fan speeds and cpu temp with the new drive sound too high. Something else is going on here. The temp is not supposed to spike when handling a larger drive. Maybe it's something like
Spotlight indexing the new drive? Have a look at your Activity Monitor for an active process drawing resources with the new drive.

Video Editing/Hard Drive Upgrade Questions

I have been using iMovie for the last year to edit video and burn it to DVD. Editing on the fly at the events that I am actually recording has been an incredible asset, but I'm going to need to perform some upgrades pretty soon. Here are my questions/concerns:
1. Has anyone successfully used Final Cut Express 3.5 with their Macbook? When I initially bought my laptop, the Apple sales-guy said that he wouldn't recommend using Express (and definitely not Pro), but I have recently looked up the the system requirements and my computer seems to fall comfortably within the low-end boundaries. Is this wishful thinking on my part?
2. Can anyone recommend an external hard drive that works well with the MacBook for working with and storing large video projects? I think I'm going to need something like a 500 GB or 1 TB.
3. Last question....In the meantime, I'll be upgrading my RAM to 2 GB. Does anyone know why Apple sells their chips for alot! more money than Crucial? Are their quality/warranty/moral issues involved in this difference?
These discussion boards have helped me comfortably deal with just about any issue I've ever had with my Macs. So, thanks in advance.
MacBook w/ 2G Core2Duo-1GB of RAM
Running 10.4.10
80GB HD w/10 GB free

anothamacuser wrote:
1. Has anyone successfully used Final Cut Express 3.5 with their Macbook? When I initially bought my laptop, the Apple sales-guy said that he wouldn't recommend using Express (and definitely not Pro), but I have recently looked up the the system requirements and my computer seems to fall comfortably within the low-end boundaries. Is this wishful thinking on my part?
Yes it works good on the MacBook.
2. Can anyone recommend an external hard drive that works well with the MacBook for working with and storing large video projects? I think I'm going to need something like a 500 GB or 1 TB.
Your hard drive is the same size as mine. You might want to consider upgrading that also. Western Digital makes a very good 250 GB 5400 RPM. I will be replacing mine with that soon.
3. Last question....In the meantime, I'll be upgrading my RAM to 2 GB. Does anyone know why Apple sells their chips for alot! more money than Crucial? Are their quality/warranty/moral issues involved in this difference?
No one knows for sure except Apple. My MacBook came with Micron RAM in it and Crucial ( a subdivision of Micron) sells the same RAM cheaper. The quality is just as good. This is Apples DIY Warranty Info so there is not an issue there. I can't think of any moral issue concerning saving myself money.

Bootcamp/Hard Drive Upgrade questions

Hi everyone, i have a couple questions about upgrading the HD in my MacBook Pro 15" Mid 1012. Potentially I want to use bootcamp, but I need some answers before I make any decisions. So basically, I want to Bootcamp Windows so i can play PC games that I've owned since before the switch (I am an art major so I had to switch to Mac). I used Bootcamp before but I couldn't register my copy of Windows 8 because it was an upgrade version, so I removed it.
My first question would be if anyone knows how to get an upgrade version of Windows 8 to work? Im pretty sure I remember seeing that it didnt work, but that was a couple months ago. Maybe things have changed since?
I have no issue buying another copy of Windows 8 if need be. I only paid $15 to upgrade anyway so it's not a major loss. The last time I used Bootcamp though, i only partitioned like 25GBs to Windows, just because I didnt know how much I would actually need. I came to realize that that was not enough. I have a 500GB HD in my MacBook Pro right now, so I would like to upgrade to a 1TB to provide more space on both sides. I've searched for a few on Amazon and such. I need to know if the physical size of the HD matters because i noticed there was two different ones. I also need to know if I can use any HD or if only certain ones are compatible? I don't want an SSD either, it is too expensive for that capacity. Basically, if anyone can recommend an exact HD, one that would be compatible with my MBP or give me an idea of what would work and what won't?
Another question would be... im not extremely comfortable popping open my Mac. This is not something that I do, even though I have read that it is extremely easy. I wanted to look first if there were any places that provide this kind of service for a reasonably cheap cost? Apple themselves, or Best Buy, Office Max etc. I don't really have a preference as long as its cheap enough. If not, or it is too expensive then I will follow instructions to perform this myself, I do know how to read after all, but I would prefer to look for a 3rd party first. Also, does anyone know if this procedure voids any warranties or anything on my Mac?
Sorry for the length. Question overload, but if anyone can answer some or all of my question, I would appreciate it so much. Thanks everyone!

MathewMelo,
for any Mac that supports Boot Camp, no, you can’t use any upgrade version of Windows; you’ll need to use a full install version. For your 15-inch Mid 2012 MacBook Pro, you can use a full install version of either 32-bit Windows 7 (with Boot Camp version 4), or 64-bit Windows 7 or Windows 8 (with Boot Camp version 5).
For the size of a hard drive that will fit inside of your MacBook Pro, you’re looking for the 2.5-inch form factor. A hard drive that supports SATA III will ensure best performance with your model MacBook Pro. A 1 TB hard drive like the Hitachi Travelstar 7K1000.B (part number 0S03563) might fit your needs, and it has a three-year warranty. I haven’t used this particular model myself, but I’d used a different Travelstar disk in my old ThinkPad for many years, and it worked well for me.
As far as replacing the hard drive, I don’t know who offers the service cheaply in your area — you should call your local computer shops and ask them. It’s not difficult to do yourself, as long as you take care to discharge static electricity before touching anything inside of your MacBook Pro. The only unusual tool that you might need is a T6 Torx screwdriver; at least in my Mid 2010 MacBook Pro, the hard drive is held in place by four T6 Torx screws, and if your model is similar, then you’ll need the T6 screwdriver to remove these screws from your stock internal drive and put them into your new internal drive so that it will stay in place. Changing the hard drive yourself does not void the warranty, but if you damage anything else while changing the hard drive, your warranty specifically does not cover that damage. The hard drive is one of the easiest things to replace in the pre-Retina unibody MacBook Pro, so it isn’t difficult to avoid damaging other components during the transplant.

HP Pavilion dv6000 Hard Drive Upgrade Question

Hello all, and thank you in advance for your advice.
I own an HP Pavilion dv6000 laptop. It came with a Western Digital Scorpio WD800BEVS (80GB 5400rpm 8MB 2.5" SATA 1.5Gb/s) hard drive installed. This drive finally failed after making funny noises for about 14 months, and I'm looking to replace/upgrade as the computer itself is still in good condition. Thankfully I back everything up on an external, so nothing was lost.
I understand that a faster drive (7200rpm) will run a bit warmer, and draw power more quickly. Power is not a concern, I rarely run the laptop without AC attached. Anybody have an idea how much warmer a 7200rpm drive would run? Would this be an issue on an older computer where the fans may not be as efficient as they were when new? I do keep the vents clear and clean, so air flow should not be impeded.
What I want:
1) I'd like to upgade to more volume.
2) I'd like to upgrade for speed as I frequently use the computer for photo editing (up to 18MB images using PhotoMechanic, Photoshop, Lightroom, Bridge, Noise Ninja). I'm thinking 16MB cache and 3.0Gb/s internal would help with this. Any downsides or compatibility issues with those upgrades on the dv6000?
3) I intend to re-install the Windows XP Home OS that came with the machine, do the updates, and strip out all the HP/Windows extras. Not about to purchase a new OS.
4) Haven't checked prices yet, but I'm fairly certain it only has 1GB of RAM at the moment. Will likely max that out to 2GB.
A quick search on Newegg brought up dozens of drives that appear to work with the dv6000.
Right now I'm between this Western Digital Scorpio Black WD5000BEKT 500GB 7200 RPM 16MB Cache 2.5" SATA 3.0Gb/s
$75 with 5-year warranty
And this Seagate Momentus 7200.4 ST9500420AS 500GB 7200 RPM 16MB Cache 2.5" SATA 3.0Gb/s
$65 with 3-year warranty
Will the dv6000 accept a SATA-II drive without issues?
The original part is $45 on Amazon with comparable prices elsewhere.
Any advice on which drive to go with (especially if you've used them personally) would be greatly appreciated. Thank you!!
***edit***
Additional information:
Looking at the label, my laptop is an HP Pavilion dv6500, CNF74143HW, AMD Turion 64 X2 and nVidia graphics.
Also, I was mistaken, it came with Windows Vista Home Premium, not XP, so I will be reinstalling with Vista HP.
The RAM is HP 449929-001, it has 2x 1GB sticks already installed, not sure if this is the max or if it can take 3 or 4 GB and actually use it.

You don't give us the exact model of the dv6000 series you have but if it is an AMD processor and the model number is equal to or lower than dv6499 I would be concerned about any extra heat. If you have the Intel version I would be less concerned. The fact of the matter is that the newest SATA-II laptop hard drives draw less power and put out no more heat than before so a current 7200 rpm model would not be any hotter or draw any more power than the 80 gig you have now. However, that model series of laptops has been plagued with unexplained issues with all 7200 rpm drives and all 500 gig drives. I have been telling people here for quite some time that the optimum, low risk upgrade is to a 320 gig 5400 rpm drive.
You want more speed. A SATA-II drive will work fine but obviously will adjust down to a SATA-I connection. You do not lose much because the difference is only in max burst speed which is rarely attained anyway. I have personally installed 7200 rpm drives in dv6000 laptops and have not had a problem. I have not installed a 500 gig drive. My advice to you is to find a 320 gig 7200 rpm drive and look for one with a 16 or 32 meg cache rather than an 8 meg cache.I have also not tried one in a dv6000 but you might want to consider a 320 gig SATA hybrid drive. They cost a bit more but will be the fastest non-SSD drive you can buy:
hybrid drive
not hybrid
Good luck. There is a small risk of issues with a 7200 rpm drive but I think you will be OK. Keep in mind installing XP takes some special steps, all covered here on this Forum in the XP downgrade guide.

GT72 Hard Drive Upgrade Question?

I am looking at upgrading the hard drive on my MSI GT72 laptop; which has the availability for me to upgrade. However, for me to do this I will need to void the warranty correct since I have to remove the label that is on the bottom of the unit that is covering one of the screws, correct?

You will not void the warranty by removing the screws for upgrades as long as you don't damage anything in the process. The sticker is there mainly to deter inept idiots from possibly doing something stupid and damaging their rig.
Like I said if you're careful and don't damage anything your good to go.

Hard Drive upgrade question

Hi Have a Mac Book Pro 160GB HD. The HD is full and i want to know what my options are?
Should i buy a bigger internal HD? how big can it be?
Should i buy an Airport Extreme and use the 2x 500GB USB drives i already have? i think the drive will spin all the time? is that a problem? will the drives be available via the wireless network?
I could buy the Time Capsule but ive read bad reviews of them?
Im not sure of the best way forward and im not familiar with the MAC technology.
cheers
kev

Your options are pretty simple, a) get an external drive to use for storage or b) install a larger HD into your MBP. This should be in addition to your Time Machine external drive. You can easily install a 500 GB drive into your machine.
There really isn't a need to buy a new router unless you want to hook your existing USB external HD's to it, you can do that with either TM or TC. I would recommend visiting OWC's web site for external drives, they specialize in Macs and can assist in pre-sales and post-sales support. They can help you choose the right drive for your needs and also provide how to videos. I think you will find most people on this site agree they are a reliable vendor.
Regards,
Roger

How do I reinstall my operating system after hard drive upgrade on MacBook pro? I have Snow Leopard install disc

How do I reinstall my operating system (Snow Leopard) after a hard drive upgrade. I did a Time Machine backup before the new hard drive was installed. I put in the Snow Leopard install disc and don't get the icon I'm supposed to double click to install Snow Leopard and then the backup.
HELP PLEASE!!

Is the new HHD in the MBP?
Is the new HDD formatted Mac OS Extended (Journaled)?
Where is the old HDD? In an enclosure? What is on the old HDD, your user data? Is the Snow Leopard System on it?
Do you have a separate Time Machine Disk with your user data?
Answers to these questions should give an exact status of your situation so that one can proceed in the right direction.
Ciao.

Time Machine confused after iMac hard drive upgrade

Here's the deal. I had my 24" iMac internal 250-gig hard drive upgraded to a 1-Terabyte drive. Tech guy cloned them with SuperDuper. New drive booted right up and works great. My question is regarding Time Machine, which I have set up to backup to an external drive. I assumed because old drive was cloned to new drive, Time Machine would think it was the same drive and just keep backing it up as it always has. But what happens is Time Machine just keep saying "processing" and nothing ever happens.
Is there a way to tell TM to start backing up the new drive as it always did or do I need to delete my current (1 1/2 yr. old) TM files and let it start from scratch again? I really don't want to do that. Any ideas?

As V.K. says, that procedure may or may not work.
The reason for the long preparing stage is that TM, seeing a different drive, is examining every file and folder on your system, and may do a full backup of your entire system.
Download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. You'll probably see a message about a UUID error referencing your internal drive --that means TM doesn't recognize it as the same one it last backed-up.
Then you'll probably see one about a "deep traversal." That means TM is looking at every file and folder on your system to see what needs to be backed-up. This takes quite a while, of course, and you won't see anything being backed-up (xx MB of yy GB) until it's done.
If TM does perform a full backup, it may have to delete a lot of your old backups to make room for the new one. If it can't delete enough, it will fail.

How can I browse T.M. backups made BEFORE internal hard drive upgrade?

Hi, all. I have googled and googled with no info on my particular situation. Maybe one of you can help. Here's hoping...
I have a MacBook Pro and use Time Machine to back up to a Firewire hard drive. I do not back up my System and Applications, just files. Consequently, when I recently upgraded my internal hard drive I restored all my data and settings from the original internal hard drive (not the Time Machine).
From there Time Machine began making NEW backups of the NEW hard drive, no problem, but I cannot browse the backups of the previous internal hard drive. Is there any way I can get Time Machine to recognize all of these backups as existing from the same machine and let me browse back beyond the internal hard drive upgrade?
Any help is greatly appreciated!

I think you have to browse them separately, but you should be able to do so by right-clicking (control+click) on the Time Machine icon in the dock or by holding the option key when clicking the icon in the menu bar.
Choose "Browse other Time Machine Disks" and you should see the old series of backups.
~Lyssa

Hard Drive upgrade

I'm considering a hard drive upgrade but i dont know crap about them. I went over to newegg because i heard it was a good site and found this one......
"Western Digital Scorpio Blue WD5000LPVT 500GB 5400 RPM 8MB Cache 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive -Bare Drive"
The only problem is, I dont know wheter it is compatible with my Early 2009 13 inch macbook pro..... Should I go with this one or are there better ones out there? I'm not really worried about price. I was aiming to get a 500gb. Thanks.

It is compatilbe if it's a 2.5" notebook SATA II 3.0 Gb/s model. Take Csound1's advice. If you buy a WD drive or any other makers' drives do not purchase any "green" drives as they don't work well in Macs.
If you want better performance get a drive rated for 7200 RPM with as large a cache as possible (typically 16 MBs.) Other makers to consider include Hitachi, Seagate, and SamSung.
If you want faster speed consider the Seagate XT500 hybrid. Or visit OWC and look into their DataDoubler that enables you to replace the optical drive with an SSD (or another HDD.)

Hard Drive Upgrade - Incorrect Capacity Shown In Disk Utility After Installation

I have an older model Macbook Version 2.1 that had an 80GB hard drive installed. I have just installed a Western Digital Scorpio Black 500GB internal hard drive upgrade and successfully cloned my data over using Carbon Copy Cloner. The problem I have encountered is that only 98.1GB of capacity is shown in Disk Utility for the new hard drive. After starting the computer using my bootable copy via an external USB drive, I formatted the newly installed 500GB drive with the appropriate Apple formatting (e.g. GUID and Mac OS Extended Journaled) but it only shows 98.1GB of space available on the new drive. I was able to successfully clone the information from my bootable back-up of the old drive to the new drive but I just don't have the full 500GB capacity available to me.
What should I do? Is this a problem with the new hard drive or is there something I need to change on my Macbook to "see" the whole capacity of my new drive?
Thanks for your advice,
Dave

Hi Andrew,
When I formatted the new drive did it with 1 partition and it displays a TOTAL of 98.1GB free space (both in Disk Utility and About This Drive). As far as I can tell, the Macbook is treating the new WD drive as if it is only a 98.1GB drive rather than the 500GB drive that it is.
Thoughts?
Dave

IPod sync problems after hard-drive upgrade/change

Hello all,
Can anyone PLEASE help?
I have just had my hard drive upgraded/changed from the original 640GB drive to a new 2TB drive. I've also had an additional 4GB of RAM added to now give me 8GB RAM.
Absolutely everything else seems to be working fine (unusual for me and I'm often at the end of bad luck in such circumstances). The only thing I'm having problems with is syncing my iPod Classic with iTunes. Incidentally, I have the latest version of iTunes and my iPod software was up to date the last time I checked.
Before I go further, my system specs are:
iMac
24-inch, Early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X Mountain Lion 10.8.2 (12C60)
When I connect my iPod Classic, the iPod screen initially shows 'Synchronisation in progress' (or whetver similar wording it actually is)... but this is just very briefly. It then indicates "Connected", and that's the way it stays and doesn't change at all.
It takes time to actually show up in iTunes, and when it does, I now have to very quickly click the iPod button (to bring up the iPod screen on iTunes) before the pointer turns into the spinning beach ball.
Now, it hangs... and hangs... and hangs... and hangs.
During this, I notice that "Manually manage music and videos" is ticked (which I didn't have ticked before), and also 'Enable disc use' is also ticked, although greyed out.
Occasionally, the spinning beach ball will disappear and the pointer will return, but this is very very briefly and I have a split-second to try unticking - first - the "Manually manage music and videos" box and then - later, if I'm lucky - untick the 'Enable disc use' box. However, on the odd occasion I've managed this, I haven't been able to go further except for two occasions when I managed to click "Apply". The iPoid on those to occasions started to update... but went nowhere... it just did nothing.
When the thing finally just hangs and hangs, I eventually have to 'force quit' iTunes and unplug the iPod without first ejecting. There was one other occasion when I managed to - split-second when the spinning beach ball disappeared - to click "eject" and the iPod succesfully did so.
There were a couple of occasions in the past when I had trouble with my iPhone and was told to delete/trash the iPhone photo cache folder. Remembering this, I tried this for the iPod (iPod photo cache) and it made no difference... same situation.
I did notice on one occasion at the beginning of all this that when I managed to unplug my iPod from iTunes, all the album covers were missing from the iPod (although still in iTunes). This was long before I tried deleting the iPod photo cache folder though.
Any help would be greatly appreciated.
Best regards
BionicDan

First things first the spinning beach ball is usually an indication that Search is going nuts.
Turn off Search entire Library by clicking on the downward pointing arrow to the right of the Magnisying glass and untick Search entire library.
Is your music still in iTunes on your new hard drive or is it only on your ipod?
If it is in your itunes then you should be able to plug in the iPod and uncheck Manually Manage music and sync
If the music is only on the ipod connect up as above click on the device and Drag all the music from your device to the library. then you can uncheck manually manage music and sync as normal

G40 2384-A9U Hard drive upgrade

I updated the bios to 1.21 which seems to be the latest bios 2006. The hard drive upgrade listed for purchase 2004 was an 80G. I was hopeing that I could put a larger dirve in because the newer bios was 2 years past the hard drive upgrade listing. I tried a 250G but it does not seem to be recognized. Does anyone know what the max hard drive size the latest bios supports?
Solved!
Go to Solution.

I first entered CMOS (setup) and under security, and set the desktop to disable. I was able to transfer the data to the 250G from the 40G using Ghost 2003 and selecting the image setting -IB (Image Boot). I was fortunate enough to have a floppy drive on the notebook (G40 2384-A9U). I attached an external USB 40G drive to the notebook, booted with Norton's Ghost 2003 boot disk created with USB support enabled. I went into options and selected Image Boot under the image tab and then copied the existing 40G drive to the external 40G USB drive. I then replaced the 40G drive in the notebook with the 250G drive, booted with the Norton Ghost disk and selected the image boot again and copied the 40G USB drive to the new 250G drive now in the notebook. I went back into the CMOS (setup) and put the security for the desktop back to normal. The only thing different seem to be the utilities are missing if you hit the IBM access button. I notice that when you disable the security for the desktop in CMOS, you will see an unpartitioned space of almost 2Gigs. This appears to be where some of the 4 sectors that lenovo uses to hold the boot information and probably their utility programs. The norton -IB switch does seem to get the boot sector information but not the utility portion of the unused area. The result is the unused space is reduced to only 2 megs on a 40 Gig drive and shows up as 4 megs on the 250 Gig drive.

Spinning beach ball after hard drive upgrade

Im running a macbook pro i7 2.2ghz 8gb ram version 10.6.8 SL
I recently upgraded my 128gb ssd to a 512gb ssd drive. I cloned the drive to new drive and ever since then, I get the spinning beach ball very often whereas I never got it prior to the hard drive upgrade. Is there anything I can check or do to eliminate the freeze ups? It is VERY annoying. Or do I just need to do a fresh install on the new hard drive.
thanks in advance

Did you properly prep the drive first:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Hard Drive Upgrade Questions.

Similar Messages

Maybe you are looking for