Hard drive upgrade temperature sensor

I was watching the OWC video (www.macsales.com) on upgrading the internal hard drive and it showed a temperature sensor attached to the hard drive. It looks like the sensor is attached to a plug or something on the front of the Hitachi drive. I have a Seagate 500GB drive and I don't see any plug in front of the drive that I can attach this heat sensor plug to.
Am I seeing this right? Or can I attach the sensor to any part of the front of the Seagate drive? Or is there a specific part of the drive I should attach the sensor to?
Thanks.

Well,
You're seeing correctly. There is no plug. It is just stuck at that particular spot with sticky adhesive.
I put a 320 GB Hitachi drive almost immediately in my 2009 Mac mini, and the adhesive seemed to re-stick quite well onto the new drive.
Peace to you,
C. Livingstone

Similar Messages

  • How can I browse T.M. backups made BEFORE internal hard drive upgrade?

    Hi, all. I have googled and googled with no info on my particular situation. Maybe one of you can help. Here's hoping...
    I have a MacBook Pro and use Time Machine to back up to a Firewire hard drive. I do not back up my System and Applications, just files. Consequently, when I recently upgraded my internal hard drive I restored all my data and settings from the original internal hard drive (not the Time Machine).
    From there Time Machine began making NEW backups of the NEW hard drive, no problem, but I cannot browse the backups of the previous internal hard drive. Is there any way I can get Time Machine to recognize all of these backups as existing from the same machine and let me browse back beyond the internal hard drive upgrade?
    Any help is greatly appreciated!

    I think you have to browse them separately, but you should be able to do so by right-clicking (control+click) on the Time Machine icon in the dock or by holding the option key when clicking the icon in the menu bar.
    Choose "Browse other Time Machine Disks" and you should see the old series of backups.
    ~Lyssa

  • Hard Drive upgrade

    I'm considering a hard drive upgrade but i dont know crap about them. I went over to newegg because i heard it was a good site and found this one......
    "Western Digital Scorpio Blue WD5000LPVT 500GB 5400 RPM 8MB Cache 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive -Bare Drive"
    The only problem is, I dont know wheter it is compatible with my Early 2009 13 inch macbook pro..... Should I go with this one or are there better ones out there? I'm not really worried about price. I was aiming to get a 500gb. Thanks.

    It is compatilbe if it's a 2.5" notebook SATA II 3.0 Gb/s model. Take Csound1's advice. If you buy a WD drive or any other makers' drives do not purchase any "green" drives as they don't work well in Macs.
    If you want better performance get a drive rated for 7200 RPM with as large a cache as possible (typically 16 MBs.) Other makers to consider include Hitachi, Seagate, and SamSung.
    If you want faster speed consider the Seagate XT500 hybrid. Or visit OWC and look into their DataDoubler that enables you to replace the optical drive with an SSD (or another HDD.)

  • Hard Drive Upgrade - Incorrect Capacity Shown In Disk Utility After Installation

    I have an older model Macbook Version 2.1 that had an 80GB hard drive installed.  I have just installed a Western Digital Scorpio Black 500GB internal hard drive upgrade and successfully cloned my data over using Carbon Copy Cloner.  The problem I have encountered is that only 98.1GB of capacity is shown in Disk Utility for the new hard drive.  After starting the computer using my bootable copy via an external USB drive, I formatted the newly installed 500GB drive with the appropriate Apple formatting (e.g. GUID and Mac OS Extended Journaled) but it only shows 98.1GB of space available on the new drive.  I was able to successfully clone the information from my bootable back-up of the old drive to the new drive but I just don't have the full 500GB capacity available to me.
    What should I do?  Is this a problem with the new hard drive or is there something I need to change on my Macbook to "see" the whole capacity of my new drive?
    Thanks for your advice,
    Dave

    Hi Andrew,
    When I formatted the new drive did it with 1 partition and it displays a TOTAL of 98.1GB free space (both in Disk Utility and About This Drive).  As far as I can tell, the Macbook is treating the new WD drive as if it is only a 98.1GB drive rather than the 500GB drive that it is.
    Thoughts?
    Dave

  • How do I reinstall my operating system after hard drive upgrade on MacBook pro?  I have Snow Leopard install disc

    How do I reinstall my operating system (Snow Leopard) after a hard drive upgrade. I did a Time Machine backup before the new hard drive was installed. I put in the Snow Leopard install disc and don't get the icon I'm supposed to double click to install Snow Leopard and then the backup.
    HELP PLEASE!!

    Is the new HHD in the MBP?
    Is the new HDD formatted Mac OS Extended (Journaled)?
    Where is the old HDD? In an enclosure?  What is on the old HDD, your user data?  Is the Snow Leopard System on it?
    Do you have a separate Time Machine Disk with your user data?
    Answers to these questions should give an exact status of your situation so that one can proceed in the right direction.
    Ciao.

  • IPod sync problems after hard-drive upgrade/change

    Hello all,
    Can anyone PLEASE help?
    I have just had my hard drive upgraded/changed from the original 640GB drive to a new 2TB drive. I've also had an additional 4GB of RAM added to now give me 8GB RAM.
    Absolutely everything else seems to be working fine (unusual for me and I'm often at the end of bad luck in such circumstances). The only thing I'm having problems with is syncing my iPod Classic with iTunes. Incidentally, I have the latest version of iTunes and my iPod software was up to date  the last time I checked.
    Before I go further, my system specs are:
    iMac
    24-inch, Early 2009
    Processor  2.66 GHz Intel Core 2 Duo
    Memory  8 GB 1067 MHz DDR3
    Graphics  NVIDIA GeForce 9400 256 MB
    Software  OS X Mountain Lion 10.8.2 (12C60)
    When  I connect my iPod Classic, the iPod screen initially shows  'Synchronisation in progress' (or whetver similar wording it actually  is)... but this is just very briefly. It then indicates "Connected", and  that's the way it stays and doesn't change at all.
    It takes time to actually show up in iTunes, and when it does, I now have to very quickly click the iPod button (to bring up the iPod screen on iTunes) before the pointer turns into the spinning beach ball.
    Now, it hangs... and hangs... and hangs... and hangs.
    During this, I notice that "Manually manage music and videos" is ticked (which I didn't have ticked before), and also 'Enable disc use' is also ticked, although greyed out.
    Occasionally, the spinning beach ball will disappear and the pointer will return, but this is very very briefly and I have a split-second to try unticking - first - the "Manually manage music and videos" box and then - later, if I'm lucky - untick the 'Enable disc use' box. However, on the odd occasion I've managed this, I haven't been able to go further except for two occasions when I managed to click "Apply". The iPoid on those to occasions started to update... but went nowhere... it just did nothing.
    When the thing finally just hangs and hangs, I eventually have to 'force quit' iTunes and unplug the iPod without first ejecting. There was one other occasion when I managed to - split-second when the spinning beach ball disappeared - to click "eject" and the iPod succesfully did so.
    There were a couple of occasions in the past when I had trouble with my iPhone and was told to delete/trash the iPhone photo cache folder. Remembering this, I tried this for the iPod (iPod photo cache) and it made no difference... same situation.
    I did notice on one occasion at the beginning of all this that when I managed to unplug my iPod from iTunes, all the album covers were missing from the iPod (although still in iTunes). This was long before I tried deleting the iPod photo cache folder though.
    Any help would be greatly appreciated.
    Best regards
    BionicDan

    First things first the spinning beach ball is usually an indication that Search is going nuts.
    Turn off Search entire Library by clicking on the downward pointing arrow to the right of the Magnisying glass and untick Search entire library.
    Is your music still in iTunes on your new hard drive or is it only on your ipod?
    If it is in your itunes then you should be able to plug in the iPod and uncheck Manually Manage music and sync
    If the music is only on the ipod connect up as above click on the device and Drag all the music from your device to the library. then you can uncheck manually manage music and sync as normal

  • Time Machine confused after iMac hard drive upgrade

    Here's the deal. I had my 24" iMac internal 250-gig hard drive upgraded to a 1-Terabyte drive. Tech guy cloned them with SuperDuper. New drive booted right up and works great. My question is regarding Time Machine, which I have set up to backup to an external drive. I assumed because old drive was cloned to new drive, Time Machine would think it was the same drive and just keep backing it up as it always has. But what happens is Time Machine just keep saying "processing" and nothing ever happens.
    Is there a way to tell TM to start backing up the new drive as it always did or do I need to delete my current (1 1/2 yr. old) TM files and let it start from scratch again? I really don't want to do that. Any ideas?

    As V.K. says, that procedure may or may not work.
    The reason for the long preparing stage is that TM, seeing a different drive, is examining every file and folder on your system, and may do a full backup of your entire system.
    Download the +Time Machine Buddy+ widget. It shows the messages from your logs for one TM backup run at a time, in a small window. You'll probably see a message about a UUID error referencing your internal drive --that means TM doesn't recognize it as the same one it last backed-up.
    Then you'll probably see one about a "deep traversal." That means TM is looking at every file and folder on your system to see what needs to be backed-up. This takes quite a while, of course, and you won't see anything being backed-up (xx MB of yy GB) until it's done.
    If TM does perform a full backup, it may have to delete a lot of your old backups to make room for the new one. If it can't delete enough, it will fail.

  • G40 2384-A9U Hard drive upgrade

    I updated the bios to 1.21 which seems to be the latest bios 2006. The hard drive upgrade listed for purchase 2004 was an 80G. I was hopeing that I could put a larger dirve in because the newer bios was 2 years past the hard drive upgrade listing. I tried a 250G but it does not seem to be recognized. Does anyone know what the max hard drive size the latest bios supports?
    Solved!
    Go to Solution.

    I first entered CMOS (setup) and under security, and set the desktop to disable.  I was able to transfer the data to the 250G from the 40G using Ghost 2003 and selecting the image setting -IB (Image Boot). I was fortunate enough to have a floppy drive on the notebook (G40 2384-A9U). I attached an external USB 40G drive to the notebook, booted with Norton's Ghost 2003 boot disk created with USB support enabled. I went into options and selected Image Boot under the image tab and then copied the  existing 40G drive to the external 40G USB drive. I then replaced the 40G drive in the notebook with the 250G drive, booted with the Norton Ghost disk and selected the image boot again and copied the 40G USB drive to the new 250G drive now in the notebook. I went back into the CMOS (setup) and put the security for the desktop back to normal. The only thing different seem to be the utilities are missing if you hit the IBM access button. I notice that when you disable the security for the desktop in CMOS, you will see an unpartitioned space of almost 2Gigs. This appears to be where some of the 4 sectors that lenovo uses to hold the boot information and probably their utility programs. The norton -IB switch does seem to get the boot sector information but not the utility portion of the unused area. The result is the unused space is reduced to only 2 megs on a 40 Gig drive and shows up as 4 megs on the 250 Gig drive.

  • Spinning beach ball after hard drive upgrade

    Im running a macbook pro i7 2.2ghz  8gb ram  version 10.6.8 SL
    I recently upgraded my 128gb ssd to a 512gb ssd drive.  I cloned the drive to new drive and ever since then, I get the spinning beach ball very often whereas I never got it prior to the hard drive upgrade.  Is there anything I can check or do to eliminate the freeze ups?  It is VERY annoying.  Or do I just need to do a fresh install on the new hard drive.
    thanks in advance

    Did you properly prep the drive first:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

  • Hard Drive Upgrade in Vista

     I have an IBM T60p with original 90 gig HD.  I spent a weekend trying to upgrade to a larger capacity drive.  Downloaded several commercial programs.  None of them worked properly.  I finally found a way to use Vista to complete the task.  This procedure works, have a new 320 gig WD 7200 RPM drive working correctly in my computer.    Hard drive Upgrade in Windows Vista 
    This procedure was used on an IBM ThinkPad T60p with 90 gig SATA HD.Machine was upgraded with a Western Digital 320 gig BEKT SATA drive (Scorpio Black).  
    Before you start:You need to change the BIOS setting for Windows to recognize your new drive. 
    Reboot and enter BIOS
    Select “Config” => Serial ATA (SATA) => SATA Controller Mode Option: => COMPATIBILITY
    Save and exit 
    Review Boot priorities to enable the Boot from CD option
    Have a copy of Windows Vista on CD; the version does not matter, you will use this only to boot from CD.  
    See WD product description at following website
    http://www.wdc.com/en/products/products.asp?drivei​d=477  
    You will need an external USB hard drive to back up your existing hard drive.
    It needs to be large enough to back up your existing drive. 
    Plug in the drive, Windows should recognize it.
    Format the external hard drive so it is clean. 
    Backup Existing Drive
    Back up drive C to the external drive using Windows Vista.
    Go to Control Panel => Backup and Restore Center
    Select the “Back-up files or your entire computer” option
    Select “Back up computer
    ”Windows displays “Where do you want to save the backup”
    Select “On a hard disk”
    Windows displays hard drives available,
    Select the drive you just plugged in
    Click “Next”
    Review the screen “Confirm your backup settings”
    Windows displays “Local Disk (C) (System)” in the bottom window.
    Click “Start backup”. 
    Backup will take 1-2 hours.  
    When completed, you have a complete image of your drive created by Windows Vista on the external HD 
    Install new Hard Drive
    Shut down the machine.
    Install the new hard drive per manufacturer instructions.
    http://www-307.ibm.com/pc/support/site.wss/documen​t.do?lndocid=MIGR-62826  
    Boot the computer using the Vista CD.
    Once files are loaded, Vista will open
    Click “Next”
    Click “Repair Your Computer”
    Windows displays a window showing operating systems available, the window will be blank.
    Click “Next”
    Windows displays “Choose a Recovery Option”
    Select “Windows Complete PC Restore”
    Windows displays the saved image from your external drive
    Click “Next”
    Windows displays the restoration information
    Click “Finish”
    Remove the Windows CD
    Restore will take 1-2 hours 
    Set up the new drive
    After restoration, the system will reboot and you should be at the Vista Log In screen. 
    Log in normally and check to be sure your programs work.  
    You now need to tell Vista you have a new drive, and resize the partition to the capacity of the new drive.  
    Tell Windows to recognize the new drive
    Start Menu, L click “Computer”
    Drive C displays the stored image with the same capacity of the old drive.
    R click on drive C => properties
    Select the “Hardware” tab
    Highlight drive C
    Select the “Properties” tab, bottom right
    Click on “Change settings”, bottom left
    Click on the “Volumes” tab
    Click the “Populate” tab 
    Windows will now populate the table with the settings for the new drive. 
    Save the settings and Reboot the computer. 
    Windows will now recognize the new higher capacity drive. 
    After reboot
    Start Menu, R click “Computer”
    Select “Manage”
    In the L window, select “Storage” => “Disk Management”
    Disk “0” is your new drive
    Select Drive C
    R click Drive C, select “Extend Volume”
    The Extend Volume Wizard will open
    Click “Next”
    Click “Finish” 
    The new drive capacity is now operational.
    You will now have two partitions, one for Windows, one for programs and data.   

    I'm also interested if anyone knows. I called the Square Group in London (Nex Oxford Street) but they said they'd get back to me ... but they didn't ...

  • MacBook Pro2012 : How can you get hard drive upgraded in Netherlands without losing warranty?

    My MacBook Pro (2012) hard drive is almost full, Apple refuses to provide hard drive upgrade service, how can you get hard drive upgraded in Netherlands without losing warranty?

    Dear Ralph, and All
    My MBP is indeed non-retina.
    I also have Apple care support for 3 years
    I was in touch with Apple suport since last week. Response I got on Phone was pretty astounding (waiting email confirmation). They say following
    - Apple support does not provide such service of upgrading hard drive
    - Doing it yourself means you will lose warranty (due to nature of operation one would need to perform on the computer)
    - None of authorised delars will provide such a service
    So as such there apparantly is no way to get your hard drive upgraded without losing warranty.
    Leaves me a bit perplexed
    I do understand MBP retina (or iPAD / iPhones) are manufactured in way that makes it technically impossible to upgrade certain parts. But why non-retina MBP?
    What do you all think? is this reasonable? is this what a MBP customer would expect?
    Really appreaciate the quick responses i have recieved from you and others on this forum.
    Many thanks
    Tirath Shah

  • Ibm hard drive active protection sensor problem

    i have a IBM thinkpad t41, i dun't know why it come out this message "ibm hard drive active protection sensor ", after that it come out ask me to type a password to log in. i never set password at notebook hard drive. pls help me~~urgent!! thanks!!

    I think you're right, that does not read clearly.  Furthermore, I believe it may contain an error or two.
    If you're installing tp_smapi from AUR (as the page implies), the PKGBUILD should already install the module to the correct location, meaning the build instructions ('make install HDAPS=1'), are redundant.
    I'd simply use 'makepkg' and  'pacman -U [...]', as usual.
    To load the module correctly, I have:
    /etc/rc.local:
    modprobe tp_smapi
    modprobe thinkpad_ec
    insmod /lib/modules/$(uname -r)/extra/hdaps.ko
    /etc/rc.conf:
    MODULES=([...] !thinkpad_ec !tp_smapi !hdaps [...])
    There is probably a cleaner way to do this, though the method described in the wiki results in several errors regarding "Unknown symbol" upon loading the module.  Could anyone confirm or improve upon the above instructions, so that the tp_smapi section could be brought up-to-date?
    Last edited by chpln (2009-12-11 00:41:34)

  • Need help picking the correct hard drive upgrade for my MBP

    I need help picking the correct/best hard drive upgrade for my MBP. It is the 15" 2GHz Core Duo. Came with a spacious 90GB drive.
    Suggestions and recommendations very appreciated.

    It will take almost any 2.5 inch sata drive.
    Take a look at www.newegg.com and www.macsales.com to see what's out there and how much it costs.
    Toshiba have a 320gb 2,.5 inch drive in the works, but it's not quite out yet and will be expensive.
    I'll start you off..
    http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives

  • Hard drive upgrade on 13" MBP sudden motion sensor compatibility

    Hello,
    I'm planning on upgrading the hard drive in my 13" MBP (aluminium unibody) and I've read a lot of posts regarding the sudden motion sensor conflicts with OS X 10.6.2. I'd like to know if the Western Digital 500GB Scorpio Blue here (http://www.dabs.com/products/western-digital-500gb-scorpio-blue-5400rpm-sata-300 -8mb-58P6.html) would suffer from the conflict (I'm not sure if "Shock Guard" = sudden motion sensor). I don't know if its a simple yes/no or whether its drive / mac specific.
    If it would be a problem does anyone have a suggestion for a guaranteed compatible 500Gb hard drive (5400 rpm is fine)?
    Any thoughts are much appreciated, thanks for your help!

    Western Digital Lists their drive features as:
    * IntelliSeek™ - IntelliSeek technology calculates optimum seek speeds to lower power consumption, noise and vibration.
    * SecurePark™ - WD's SecurePark technology parks the recording heads off the disk surface during spin up, spin down and when the drive is off. This ensures the recording head never touches the disk surface resulting in improved long term reliability due to less head wear, and improved shock tolerance.
    * ShockGuard™ - WD's ShockGuard technology protects the drive mechanics and platter surfaces from shocks during shipping and handling and in daily operation.
    * Free-fall Sensor - As an added layer of protection, if the drive (or the system it's in) is dropped while in use, WD's free-fall sensor detects that the drive is falling and, in less than 200 milliseconds, parks the head off the disks to help prevent damage and data loss.
    * WhisperDrive™ - WD's exclusive WhisperDrive technology combines state-of-the-art seeking algorithms that result in one of the quietest 2.5-inch drives on the market.
    The Free Fall Sensor is the equivalent of the Sudden Motion Sensor. Looking at the specs for the drive you linked to... they list the following features:
    Shock Guard, WhisperDrive, SecurePark
    As they do not list Free Fall Sensor, I'm guessing this model does not have one so it should not conflict with the internal Sudden Motion Sensor in your MacBook.

  • MacBook fan running high most of the time after HDD/Hard-drive Upgrade

    Hi guys,
    I've just recently upgraded my MacBook white's (MacBook5,2, 2GHZ duo core, 4GB ram) stock harddrive to a WD 2.5" black 750GB. After which, I noticed my macbook fan running at high speeds majority of the time... Even when just doing light weight stuff on it, such as surfing the net using Safari or even just leaving my computer idle after startup.
    I did a clean install twice, the second was too see if it was really just a badly installed OS, but the problem still persisted, well at least till I decided to come here to type the post =P (maybe my macbook's scared about being talked about). Do note, that I did a pc migration each time.
    After the upgrade, My fan usually runs at about 5000-6200 rpm, but right now as I'm typing this post, its surprisingly alot lower then what I've been experiencing. About 3000rpm-4000rpm.
    As for the harddrive temperature, I noticed it runs between the 37 degree to 40 degree celsius range, so I'm guessing the hard-drive temperature sensor isn't busted, which was the problem for others from what I've read from other discussions here.
    Also, when I boot my windows partition, the fan doesn't go as crazy, but it eventually will too.
    Any idea what the problem could be? =s Or could it be that my MacBook can't handel 7200rpm hard drives =/ If so I'd probably downgrade to a 1TB WD blue =s
    On top of that, does any one know if the 2.5" WD blue are as reliable as the 2.5" WD blacks? As I'm heistant to downgrade as I've read that the blues have a higher failure rate, and wouldn't want that happening. Oh and I'm not considering an SSD for this particular MacBook at the moment, as I may upgrade in another two years or so!
    Thank you!
    Edwin

    Hey Mende1,
    Well I guess I'll try returning the drive at the end of this week then my fan seemed to have slowed down abit since the upgrade, it's sorta spinning around 3000rpm now. I'm not sure if it's gonna be the same thoughout, and I'm pretty sure it doesn't spin as much as it did when I had my old HDD on. So I'm giving it a few more day probably till the end of this week. And if the noise issue still surfaces I'll try a different hard drive! and update you on the results!
    Thanks alot Mende1!
    And hello there rauldoppler!
    Well, firstly, I'm using a early 2009 MacBook white! The pre-unibody one. It's running on a 2GHz Intel Core 2 Duo processor with 4GB for ram.
    As for the hard-drives, I'd actually reccommend you to upgrade to an Solid State Drive if you can afford it, but if you're like me who needs more memory space then boot speed etc, I guess a HDD will be fine =) As for which brand of hard-drives, I would actually recommend WD (their black drives especially, 5 year warranty, 7200rpm speed hehe), but right now I'm having the fan problems, so I'm not too sure anymore.
    I did however, do quite abit of digging around on the net and concluded that WD was a better choices amoungst the rest... But yeah the fan issue is still something I didn't expect. All in all, I guess as for which drive is better, it really depends on your needs or wants, if it's for casual internet surfing and stuff, a WD blue HDD would be fine, or a black if you want a slightly faster boot speed etc at the expense of your battery life and all. If you however value blazing fast boot times and application start up times, go for an SSD. If you need the memory space more then anything then I'd say go for a HDD again too, as it's cheaper interms of gigabite to dollar ratio. (for example, the older 500GB version of my new WD black would cost USD $43, while a Samsung 500GB SSD Pro would cost $349) Also, You could do abit of reading up on SSDs if you're interested in it There's alot of plus points to it, like ALOT, and if the price tag wasn't so huge, I would have used it for my macbook already!
    Lastly, I used a WD Black 750GB for my macbook upgrade. However, I'm gonna downgrade to a WD blue 1TB this weekend if the fan doesn't settle down over time Cause well, the fan noise is really an issue for me.
    Peace out guys!
    Edwin

Maybe you are looking for

  • Java Web Start Version 1.0 doesn't found installed JRE

    I would like to try some demos from http://java.sun.com/products/javawebstart/demos.html After I clicked on image receive next page with message "In order to launch the requested application, you will need to download Java Web Start Version 1.0 - Thi

  • Using Swing Parser locks up.

    I'm using the Swing Parser class to read all the text content of an HTML page off the web. I override the parse() method. I then setup my URL connection and setup my BufferedReader, and then I call super.parse(br); I run this code every 5 seconds in

  • Creating an alpha channel in an odd way ?

    My question is about the functionality of After Effects. I highly doubt it's possible but would like to run it through people who would know. My question may not be clear as I'm not sure how to describe it! I'm wondering if I can create an alpha chan

  • Entry in F-90

    Hi All, I am trying to post entry in F-90, I am getting belwo error. Please assist me. "For document type KR, an entry is required in field reference"

  • LINUX commands for navigating Oracle_Database configuration assistant?

    I'm very new to the linux scene, but I'm very familiar with the NT Oracle side. I'm having trouble navigating around LInux looking for the commands to run Oracle. If anyone has any pointers on particulars I'd appreciate it. But to start, can someone