Hard Drive won't register with FCP X

I'm new to FCP X and I want to use my hard drive with it becuase i'm running out of space on my computer.
But my harddrive isn't registering with it. It shows up on my computer and i can read and write on it but it wont show up in FCP X
I don't know what to do! If i can't figure it out i think i'll have to start deleting files on my computer

Also, can you provide your current system specs (including external drive.) Clearly you're not running 10.4.
Russ

Similar Messages

  • Looking to buy a regular definition hard drive camcorder to use with FCP 2

    Hey all, thanks for clicking my posting. Here's the deal, I am in the market for a hard drive camcorder for use with Final Cut Pro. Will be recording sports and sports-related material (but obviously want to use it for other things as well down the road). I am using an older 1.6 Ghz tower from about 5 years ago, but am using the latest OS 10.5.7. Am looking to spend about $500, but can go up a bit if needed. Since I am using an older Mac I know that I cannot use a high def cam with it, and and this point it's not needed for what I am doing.
    Was looking at the Panasonic, Sony and JVC Everio lines. I had made up my mind to grab the JVC since it has the best reviews of any of the mid priced cams out there, but was sharply warned by my Apple teacher (and 2 others there at the time) not to buy it since the .mod file format doesn't play nice with Final Cut Pro. I was going to Streamclip it into .dv but was told that I will lose quality and quite possibly audio sync. After a bit of checking around the web I found that there is an analog output of the Everio camera that I could put into my Canopus ADVC - 55 and then capture it with Final Cut Pro (the only question I have is, should I go from digital, through an analog output, only to capture it with a digital format again? Seems to me I should not go digital-analog-digital).
    So let's get to the question here then, can somebody more knowledgeable than myself tell me which cameras to look at to do the job? I guess my backup cam would be the Sony SR-47, decent reviews but not as good as the Everio. Also, are there any cameras in that price range that will simply let me pull the footage right into the bin of Final Cut Pro, or do they all have to be converted from MPEG 2 into .dv (or whatever file format I want them in). I know this is a lot of questions, but I am sure there's some cameras that I might be missing, so anybody care to help me out? Thanks in advance!
    Tom

    As far as I know, that is the only list of compatible drives with the router.  So, yes, that is the list I am referring to when I said "compatible drive list".   There are very few 2TB or 3TB drives on the list.  I would really like to be able to use a 3TB drive with a couple partitions, and that seems almost impossible with very few options.  I have been reading around the last couple days and I hear lots of reports of people successfully using drives that are not on the tested compatible list.  I just wanted to know more options from people like that.  

  • New PC - have library on external hard drive -won't sync with my ipod

    I have itunes library set up and recognizing my itunes
    library, but won't let me synce with my ipod. I went through the aurhtorization stuff,
    Any body know what I'm missing
    Thanks

    I have itunes library set up and recognizing my itunes
    library
    The songs play okay in iTunes?
    but won't let me synce with my ipod.
    It won't let you because it gives you a message saying it won't?
    Or just that nothing happens?
    What are you doing and what happens when you plug in the iPod?
    Also, see this -> See this -> Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

  • What is the Best Hard Drive Camcorder for/compatible with FCP?

    Hi,
    Just bought a JVC GZ-HD7...feel very trouble...unlike those MiniDV Cassette base Cam,Just plug in FireWire and FCP will read!!!To use the GZ-HD7 in FCP might use a lot of steps to convert before inport the source.
    And now i'ld like to invest Hard Drive Camcorder for my FCP editing base,Is it a Good Media Format?
    If yes,Which Prosumer or Semi-Pro Camcorder will you recommend?Really need your helps,maybe you are the one who are currently using it and feel happy with over all?!
    Hope to get some suggestion from you guys!!
    Thanks!!

    http://panasonic.co.jp/pavc/global/videocamera/hd/global/products/hdc-sd9/
    Thanks for tip David. I work at a middle school, we shoot a lot of district functions with three cameras then use the multiclip function of FCP. If I bought three of these cameras do you think they will work well in that environment? here is our workflow:
    1. Sync cameras with a clapper at the start of show.
    2. Import into FCP
    3. Mark inpoint at the sound of the clapper
    4. Create the multiclip sequence and edit
    We have done 50 or so shows like this with 14 year olds as the editors and the results are very nice. I would like to move to the hard drive based camera. Being in education we are on a tight budget. Think three of these camerass would work in this environment?
    Thanks so much for your expert advice.

  • WD 1TB External Hard Drive won't work with Snow Leopard

    Hi all,
    I recently purchased a Western Digital 1TB External Hard Drive. It came formatted for Windows with NTFS, but I didn't think this was a problem as the packaging stated it could easily be reformatted for Mac OS. To cut a long story short, it couldn't. When I plugged it in to my Mac (iMac 21" i3) and tried to use Disk Utility to reformat it, partition it, whatever, it just wouldn't work always returning some sort of error. I resorted to using a Gparted Live CD and succesfully formated it to HFS+ but yet when I plugged it into my Mac it wouldn't mount the disk. After following advice to let Disk Utility 'Repair' the disk, this is the output:
    Verify and Repair volume “external”
    Checking non-journaled HFS Plus Volume.
    Checking extents overflow file.
    Unused node is not erased (node = 1458) [In red]
    Checking catalog file.
    Unused node is not erased (node = 5) [In red]
    Checking multi-linked files.
    Checking catalog hierarchy.
    Invalid directory item count [In red]
    (It should be 1 instead of 0)
    Checking volume bitmap.
    Volume bitmap needs minor repair for orphaned blocks [In red]
    Checking volume information.
    Invalid volume free block count [In red]
    (It should be 244164065 instead of 244148705)
    The volume external was found corrupt and needs to be repaired. [In red]
    Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files. [In red]
    If anyone knows what this means, and more importantly anything I can do to try and fix this, I would really really appreciate the help!
    (Obviously I see it says reformat the disk, but this is easier said than done. Now Gparted crashes when it tries to read it and Disk Utility hangs indefinitely if I try to do anything to it)

    asad.a wrote:
    I believe the reasons behind this must have something to do with the errors highlighted by the repair process (as copied above)- errors I don't understand.
    Disk Utility can't repair NTFS volumes.
    If the drive is not seriously damaged ...
    Go to Disk Utility
    Click on the external Drive (not on the existing partition)
    Click on Partition section in Disk Utility
    In the Pane under "Current Scheme" highlite the Partition and then click the "-" (minus) sign down left.
    Click on the dropdown "Current Scheme" and choose a matching scheme
    On Format choose "Mac OS extended journaled"
    Click "Apply"
    Message was edited by: lupunus / typo's fixed

  • External Hard drive won't mount with Leopard

    I have a Beyond Micro Speedano 3.0 external hard drive that uses firewire. I have used it many times under Tiger to backup my Powerbook's hard drive using Carbon Copy Cloner. Now that I have Leopard, I find that I can no longer mount the external hard drive. It just will not show up on the desktop. I have tried using Disk Utility to mount it, but it does not show up with Disk Utility either. Does anyone have any suggestions of how to get it to mount?

    Hello maccynicwhoalwayshasmacs,
    Thanks for the question. After reviewing your post, it sounds like trouble with an external HD mounting. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    USB and FireWire Quick Assist
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • My External Hard Drive Won't Work With Final Cut Pro

    Hi everyone! I occasionally use my external HDD for Fianl Cut projects, but only when I'm done editing it. While I'm editing the project, I keep it on my SSD. My external HDD has 3 partitions, one for storage, one formatted for windows storage, and the last one is a Mountain Lion Recovery. When I plug in my external HDD and start FCPX, only the recovery partition shows up.. Any ideas? My pimary hard drive storage with the projects is case sensitive, but the recovery is not.. Thanks!
    Btw, I blurred the video and took out the names to protect privacy. As you can see, my internal SSD and one partition on my external show up, but the "1TB HDD" partition does not.

    I connect my bus-powered HDs (more than one) to the iMac all the time without any problems. I have found, though, that for me the FireWire enclosures work much better (faster and more stable) than the USB2 ones. I have had the USB2 drives freeze my computer once or twice when I connected the HD, but nothing like that has ever happened with the FireWire connections. (I switched the same disk from USB to a FireWire enclosure, so all other elements were kept constant in my experiments.)
    One of my HD is in a MacAlly 2.5" enclosure that offers both FireWire and USB2. The other one is in some generic enclosure with only USB2. Both are bus-powered and both work fine.

  • Recommended hard drive enclosure for use with FCP?

    I will be doing capture and editing from my main HD, but want a firewire HD for backup. ANy recommendations on enclosures?

    I agree with David. Don't capture to your boot drive. External firewire drives are cheap and you also install an extra drive within you G5 case if that is what you are using. If on a laptop.. then firewire drives are the way to do.
    I know you asked about enclosures but I always love to pass along my current drive fav... G-Raid.
    http://www.g-technology.com/Products/G-RAID.cfm

  • My portable external hard drive won't work with my G5

    I have a western digital 120 portable hd. When i connect it to my G5 via USB 2.0 port on the back, my G5 does not recognize it. I bought another WD 160 portable hd and the same thing happens. Is it because the portable hd doesn't have it owns power supply? I hooked it up to my macbookpro and it works fine. Does anyone know why this is happening?
    Thanks for your feedback...
    Message was edited by: steve chon

    I connect my bus-powered HDs (more than one) to the iMac all the time without any problems. I have found, though, that for me the FireWire enclosures work much better (faster and more stable) than the USB2 ones. I have had the USB2 drives freeze my computer once or twice when I connected the HD, but nothing like that has ever happened with the FireWire connections. (I switched the same disk from USB to a FireWire enclosure, so all other elements were kept constant in my experiments.)
    One of my HD is in a MacAlly 2.5" enclosure that offers both FireWire and USB2. The other one is in some generic enclosure with only USB2. Both are bus-powered and both work fine.

  • I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac.

    I have a Seagate Slim Portable 500 GB USB 3.0 external hard drive that worked great with my Macbook Pro 13" Retina but gets ejected and won't show files on any iMac. My Macbook Pro and the two different iMacs I tried it on were all using Mountain Lion, so the only difference was the iMac versus Macbook Pro.

    I just tried this, no luck...
    I connected a different USB cable, still the same problem. Tried both cables with the problematic hard drive on two different computers, still the same problem.
    At this point I assume I'll probably need professional help in saving the files, thanks for the assistance.

  • How come a USB will work with both Mac and Windows (as in that there are already files from Windows and Mac can still read and write onto it) but a external Hard Drive won't (as in there are files from Windows on there but Mac can read but not write)?

    I have a Seagate Drive that I'm hoping to copy some movies from my Mac onto (because it only has a 512 SSD and I'd rather keep that empty and handy for more readily needed files) but it won't work. It shows up as a drive when connected (with the orange USB drive icon popping up) and is appropirately labeled "FreeAgent Drive", but when I try to copy files onto it it won't work. There are already windows files on there, such as some windows backups and lot's and lot's of pictures and videos. However, I have several USBs which already have windows files on them (namely movies, music, and other stuff) and copying and stuff works fine. Why won't it work with this hard drive and would work with USBs? Please help me out here guys, I am not experienced with Hard disks and formatting and stuff like that. 10 points for whoever helps me out the most. Thanks.

    We will need to reformat your EXT, but it will then work on both Mac and Win
    Connect the drive to your Mac, open disk utility
    Go to the partiton tab and select '1' ... format should be ExFAT ... in options select MBR
    Format the drive
    It should now work on both OSs; report back

  • HT5622 My Ipod Classic shows a red circle with a cross in the middle. I've completed diagnostic tests which have popped up, however any HP/FW/Hard Drive tests freeze the ipod, as if the hard drive won't spin. What do I do?

    My Ipod Classic shows a red circle with a cross in the middle. I've completed diagnostic tests which have popped up, however any HP/FW/Hard Drive tests freeze the ipod, as if the hard drive won't spin. What do I do?
    After holding down the Select and Play/Pause button, I was able to restart the Ipod and then it brought me to a Diagnositc test. I have tried doing both the Mannual and Annual test on the ipod however in each test, the ipod freezes on different access tests. The HP (headphones) test, shows the headphones are detected, but then if it tries to play a song to make sure they work it freezes and goes back to the red cross. I have looked at various other questions regarding the FW cable, however I don't believe i have such a cabel. Then the Hard Drive test freezes up and I can hear a ticking noise coming from the drive but it doesnt seem to be spinning. Alongside these test issues, any computer cannot see the Ipod when plugged in (including itunes). Therefore some tests for the USB drive cannot be completed. I do not recall dropping it badly, though I have dropped it previously. Does all this mean there is damage to the drive? Should I instead take it to an apple store?
    Many Thanks

    The stats look fine. Try the DFU Restore method shown in Corrupt iPod classic. It may pay to disable any anti-virus software and use the staged transfer method to reload data, assuming you get that far.
    tt2

  • On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    On imac 10.6.8 using current version of Aperture.  How can I access the Aperture Library  on my external hard drive that I use with time machine for backup?  I can only access the application but not the library..

    Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
    If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
    If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it.

  • External Hard Drive Won't Mount- Need to recover files

    Hello Everyone,
    I am hoping that one of you fine mac experts may be able to assist ~
    Problem: External Seagate FreeAgent Desktop USB external hard drive
    won't mount on desktop=ie: no access to my important files.. Please Help!
    Details:
    External seagate freeagent 500 GB Desktop USB HD ( only 2 months old)
    (using for document / file backup-not as a startup disc)
    on my Mac G3 350 MZ Blue & White Tower /768 ram/ running OSX 10.1.5 & OS9.2~
    ~
    Problem: Started using the external 500 GB HD 2 months ago -with no problems-until this morning. Tried to double click to open it to access files
    and got the "beach ball of death" and needed to restart.
    My trusty G3 started up fine, however, the external HD was now
    not showing up on the desktop as normal. I troubleshooted -by restarting,
    trying different a/c plugs/ different USB ports , ran disk utility..called
    seagate -not much help . Seagate said to try the HD on another mac-which I did-
    a G5 tower- same problem.
    ~
    The External hard drive will show up in disk utility, but is grayed out.
    and when click "mount" same two messages keep showing:
    message 1: "a disk attempting to mount as unknown has failed verification or has failed to
    mount.please use disk utility to check the disk"
    ~
    message 2- when unplugging and repluggin the usb in-and upon
    restart:" you have inserted a disk containg no volumes that mac osx
    can read to use unreadable volumes,click initialize to continue with the disk inserted ,click continue"
    ~
    ( I really need access to these files- and do not want to re-initialize the HD!!)
    I ran Disk Utility /first aid "verify & repair , the following info came up:
    Repairing disk "main backup 2007 ".
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Invalid key length ( <<<IN RED )
    Repair completed. "
    ~~
    Though it said the repair was completed, the "invalid key length" issue
    still comes up when re-running disk utility...Hard drive would still not
    mount on desktop-even after restarting .
    ~~~~~
    If there is a mac genius out there that can help?- it would be greatly
    appreciated. I have tried to call seagate several times in the last several hours-
    1st time-they disconnected me after being on hold 10 minutes-2nd call
    I was put on hold for 40 minutes ..Finally spoke to someone ( they are not mac users or mac experts!)and he said I would need to send it to Seagate's Data Recovery-... for a fee of course!
    ~~~
    At this point, I am hoping to just get the files and photos off
    the hard drive- I heard about Disk Warrior-should I use that and if so
    what version?
    Thank you very much!
    L

    Will zapping the PRAM be of any use in getting the external to mount on the desktop?
    Your external Hard drive is already recognized. But it cannot be mounted on the desktop due to its directory damage. You can certainly Zap the PRAM, and it will not hurt anything, but I am skeptical that it will change the situation.
    Do you think the Disk Warrior 4.0 cd will even work on my G3 350MHZ running Mac OS 10.1.5?
    If you boot from the CD and run it from the CD, absolutely yes. If you attempt to INSTALL it from a download or a CD, probably not.
    Have you ever used Disc Warrior and is using it complicated?
    I own and use Disk Warrior. You select the drive to be rebuilt, it builds a proposed new directory from the information and file fragments available.
    When complete, it will provide a list of problems encountered, tell you what files have been placed in the "Rescued Items" folder, and allow you too look at your drive using the proposed new directory. Your only decision is whether the new directory seems to be an improvement over the old \[in your case, hopelessly corrupted] directory. You then tell it whether to replace the old directory with the proposed new directory, or to abandon its work and leave your Hard Drive unchanged.
    Is there a good chance that the ext HD will still have my files on it- or do you think from what I've described that they are gone ?
    From what you have described, your files are very likely to still be there. Sometimes in a situation like this, a handful of files cannot be recovered.
    My other thought was to take the external HD there and have them try to recover the files.
    Make sure you completely understand the costs involved. File recovery using a service like DriveSavers can run into many hundreds of dollars. They are prepared to disassemble your drive in a clean room and replace controller boards and read/write heads to achieve success. Your drive has serious, but not fatal, Directory damage. The Hardware, and most of your files, are likely just fine.

  • External hard drive won't mount, even after disk repair.

    My Toshiba external hard drive won't mount on my MacBook Pro 10.8.5. I can see it in my disk repair, and when I repair, "the partition map appears to be ok." But I can't access the icon to be able to open the hard drive contents on my desktop. Help!

    Hello maccynicwhoalwayshasmacs,
    Thanks for the question. After reviewing your post, it sounds like trouble with an external HD mounting. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    USB and FireWire Quick Assist
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

Maybe you are looking for