Hard drives damaged after installing Snow Leopard :(

After installing Snow Leopard all software seemed to work fine. Then I found out that e-sata doesn't seem to work well with Snow.
I've tried two different e-sata cards, including CalDigit's FASTA-2e, which CalDigit claims works fine with 10.6.
My external enclosure appeared and immediately gave me a kernel panic. I tried several times with different working drives and now they are all heavily damaged. Kernal panic after kernal panic, I am noe having a difficult time accessing the data.
Now here's the strange part...after going back to Leopard 10.5, my internal drives all seemed to be infected as well. After using Disk Warrior and apple's disc utility, I got those working ok.
What could be going wrong here? I installed Snow. It was fast. But it wasn't worth it...at least not yet.
If there's anything else I might be doing wrong or any way to fix these drives now, please let me know.
Thanks all!

It seems that Sonnet is not yet compatible with Snow Leopard either. That issue was covered here: http://discussions.apple.com/thread.jspa?threadID=2114442&tstart=0.
Anyone know if RocketRAID eSATA for Mac works with Snow? Apple sells it...
http://store.apple.com/us/product/TW106LL/A?mco=NzE2OTU5Nw
Thanks!

Similar Messages

  • After installing a new hard drive can I install snow leopard directly from snow leopard disc

    After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

    You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
    (64305)

  • Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. Not!

    Had to get new hard disk for my macbook. After installing snow leopard on new HD the computer only connects to free wifi at certain places and not others. Took it to genius bar (of course it worked find there!) they said it was fine. But problem persist.

    Hi there ricalimo,
    I would recommend taking a look at the troubleshooting steps in the article below. If the issue is location specific, than you may want to save the article so you can perform troubleshooting when you are experiencing trouble.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    -Griff W. 

  • After installing snow leopard most applications appear to not respond

    After installing snow leopard most applications appear "not responding"
    Message was edited by: john770

    Hi John, Welcome to Apple Discussions.
    Please go to "My Settings"and give us more information about your Mac. It's on this page at upper right ➦
    On your  menu choose "About this Mac" and fill in : Version, Model, Processor and Memory. Also, your "available" hard drive space which will will be at the bottom of your Finder window (xx GB available).
    Try Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
    If your apps function correctly that way, go to System Preferences >> Accounts >> Login Items, and remove them. Boot normally and test. If not go to Users/(yourname)/Library/Contextual Menu Items and move whatever is there to the desktop. Then do the same with /Library/Contextual Menu Items. Lastly, try moving ~(yourHome)/Library/Fonts to your desktop and restarting.
    Log out/in or restart, if that sorts it start putting items back one at a time until you find the culprit.
    -mj

  • Unable to print on HP J6480 after installing Snow Leopard

    After installing Snow Leopard I've been unable to print from my HP J6480.  I get an error message saying to check for updates from Apple and the manufacturer.  Apple shows no more updates.  I've added a printer driver v2.6 from Apple, but that hasn't helped.  Had no problems printing before this.  Any suggestions?

    Never mind.  Just went to Hewlett Packard site and the suggestion was to reinstall the printer.  I did so and it now works.  Of course, the reinstall wiped out other printers I had on there....Adding Snow Leopard has resulted in much more work than I thought it would be!

  • I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3.  How can I get my scanner to work?

    I can't scan from my Canon Pixma 882 after installing Snow Leopard 10.6.3. I did get the printer to work after downloading the printer software from Apple. I used to have 10.4.1.  How can I get my scanner to work?

    Check here to see if there is an updated driver available for it:
    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • I am unable to load webpages after installing snow leopard

    I am currently typing this on my iPhone. After installing snow leopard this morning I am unable to connect to either safari or Firefox. Both come up with server errors and will not load the webpages. The Internet is still connected over wifi and I am able to both send and receive emails. I am Oma MacBook running the Internet on an at home wifi connection. Please help!

    Why are you posting this in the Mountain Lion forum?

  • Audio capture lost after installing snow leopard

    Has anyone else had problems loosing their audio capture in Premiere cs4 after installing Snow Leopard?

    Just wondering, is that a plug-in for Premiere?
    Similar problem with After Effects maybe?...
    http://blogs.adobe.com/keyframes/2009/08/after_effects_and_snow_leopard.html

  • Photo Booth not working after installing Snow Leopard

    unable to open Photo Booth after installing Snow Leopard. pop up saying my version is 2.03. unable to locate an update on App store. Any solution. ? Thanks to all

    that answered my question. great. my wife has a macbook pro 13 inch (aluminum unibody) and she was getting frustrated with photo booth not working. i was about to uninstall but this answer fixed the issue. thanks!

  • S key will not shift to a cap after installing snow leopard.

    s key will not shift to cap. Cap loc will work. Tried new keyboard still no go. Happened after installing snow leopard. No other keys affected.
    What is going on?
    Message was edited by: Mike Greener

    Open the Speech pane of System Preferences and check whether either the listening key or the speech key has become set to that keystroke; if so, change the setting.
    (48871)

  • Opening Photo Files in Photo Shop CS3 after installing Snow Leopard.

    After installing Snow Leopard I could only open photo files in a Preview mode. I called Adobe and Apple and could not get a solution. So I called my local Mac tech person where I got the answer to my problem. What to do: Right click on an image file icon.(Do not open image.) Then go to: Get info. In the dropdown menu, Open with: Select Adobe Photoshop CS3.app or whatever app you desire. Then click change all. You have to do this just one time for each extention such as jpg, tif, etc. Trust this helps.

    Hello sean:
    I am not an expert in iPhoto, but people who post here are:
    http://discussions.apple.com/category.jspa?categoryID=143
    To try to address the browser problem, reset Safari and see if that helps. Also, try an alternate browser (I use Firefox that way) to see if the problem is system-wide. Also, there is a Safari forum here:
    http://discussions.apple.com/category.jspa?categoryID=169
    Barry

  • Met with a white screen after installing Snow Leopard on Macbook (mid 2007)

    After installing Snow Leopard on my Mid 2007 mac book pro I was prompted to restart. I restarted and the computer turned on but only got as far as a white screen that stays white with no further activity for an indefinite amount of time. I've restarted the computer a few times with the same results. How do I fix this and get past the white screen?!

    Try booting into "verbose mode".  That will cause a series of messages to appear on the screen during the boot process.  When that stalls (presuming it does so), write down the last few messages and post them as a reply.
    You might also try running the diagnostics that came with that Mac.  Depending on the model, you can boot with the "system restore disc" in the machine with the "D" key held down to run those.  Run the diagnostics several times.

  • Can't open any excel files after installing Snow Leopard

    I can't open any excel files after installing Snow Leopard. Is anyone else having this problem?
    I have a standard iWork '08 install. Has anyone experienced? And better yet, know of a fix?

    Welcome to Apple Discussions
    Most users who have had a problem opening Office files with the iWork apps after upgrading to Snow Leopard have the problem fixed by updating to the latest versions. For iWork '08 that is Pages 3.0.3 & Numbers 1.0.3. For iWork '09 it's Pages 4.0.2 & Numbers 2.0.2. I don't use Keynote, but it should also be updated. If you're not running the latest versions & Software Update says your software is up to date, make sure the applications are where the installer initially put them. The updaters are very picky. If the location is not where the updater is programmed to look or if the folder doesn't have the name the updater looks for, it will not work. The applications cannot be renamed or moved. They must be in the iWork '08 or iWork '09 folder in Applications. That iWork folder must be named iWork '08 or iWork '09. If it doesn't have the '08 or '09 Software Update won't find them & the updaters won't work.

  • Why have my plug ins crashed after installing snow leopard ?

    After installing snow leopards i now receive a messages saying my plug ins are disabled and shockwave crashed???

    All plugins or just flash player plugin?  If the latter download from the adobe download page and reinsitall.  Current version is 11.2.202.235.
    Also, did you check software update and install all the available snow leopard updates?

  • "Inkjet 4 Quit Unexpectedly" error message after installing Snow Leopard, C410 printer

    Can't get printer to print after installing Snow Leopard.  C410 Photosmart Premium All in One Printer.  Keeps saying "Inkjet 4 Quit Unexpectedly".  Wireless test says everything is fine.

    If you are using Snow Leopard or Lion and have HP software for pre-Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard or Lion and had the HP software on your Mac before you upgraded - even if you did a standard uninstall of the old software or installed new software over the top of it) you must uninstall the software using the 'scrubber' option:
    Go to Applications/Hewlett Packard/ click on HP Uninstaller
    Click on Continue
    Highlight your device on the left pane
    Press and hold Control + Alt + Cmd keys on the keyboard simultaneously while you click on Uninstall <<<< This IS the Scrubber Option, there is no button labeled "Scrubber"
    There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
    Click Continue and let it finish
    Restart your Mac
    Download and install this: support.apple.com/kb/DL907
    Now reset the printing system:
    - Sys Prefs, Print & Fax
    - Right (control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    Finally, get the latest software for your printer from the "Support & Drivers" link at the top of this page.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

Maybe you are looking for

  • Dunning Notice through EMail.

    Hello Gurus. We enter the mail id particulars in the vendor / customer masters.  When we execute dunning run, is it possible to send the dunning notice directly to the mail ids of the selected vendors?  If so, how to set it up? Please clarify. Thanks

  • Stored Proc and dates

    Hi All, Fairly new at this, and a little confused with dates and date formats. I run the following: alter session set nls_date_format = 'dd/mm/yyyy' If I select sysdate from dual: 02/11/2008 --> so this is correct. Now what I can't figure out is why

  • How to enter BIOS on Portege M300?

    Which Key(s) are to be pressed during cold Boot after power ON to access CMOS (aka BIOS) Setup / Settings on M300. Can I download user manual of M300?

  • How could this be achieved

    Hey everyone, I have information stored in side a file, it is first stored in arrays like this: String[] cars = {"ford", "ford", "mini"} int[] car_id = {101, 102, 103} It is then written to a file. I would like to make a record or my own type of some

  • Shockwave Player Crash

    Can anyone help - I've just bought a new Sony Vaio laptop - latest spec etc etc but every time I try to go into a flash based video chat room it crashes the browser. I've tried this in Explorer (browser crashes & reboots), Firefox (browser crashes &