Hard Drives locked after Leopard Install

Since this only happened after I installed Leopard, I figured here would be a good place. My apologies if it is not.
The root ( /Volumes/Entreri/ and /Volumes/Akira ) are now read only. All folders and files within them have correct permissions.
History: For a long time now, I've promised myself that one day, I was going to wipe my main drive, Ishii, and do OSX RIGHT. Ever since I had initial permissions problems since I upgraded my systems from OS9 to OSX, I ran my system (a Dual 1 Ghz Quicksilver G4) as root. Cringe away. I was young, and my attitude was that my dang computer was not going to tell me what I could, and could not delete (and trust me, after the initial switch and for years beyond, OSX still gave me plenty of those problems).
But I grew older and knew it was time to just run as an admin user, and not root. When Leopard was released, I figured it would be time to wipe my system HD (Ishii) totally clean, install OSX 10.5 and run as a normal user "sean."
Install goes fine. The finder pops up and I start to make what I assume are my first mistakes of my new life as an admin user. I get info on Entreri and Akira, and see their permissions are set to rwrwr-. **** no I say. The Everyone group (for some reason...) needs to have write access!! I change the permissions to rwrwrw and "apply to all enclosed items." It works! "Awesome," I thought, "all my permissions problems have been fixed!" I do that to both my Aux drives.
Then I get info on the system drive, Ryoko, and see the same thing... and I change it, and I hit apply to all enclosed items. About 30 seconds after a little voice in my head nags: "Why would you need to do that? The drive was wiped fresh- every file in there has the permissions OSX set for it.."
But it was in process- and I've learned not to interrupt OSX doing file changes.
As I'm sure you can guess, OSX starts behaving strangely after that. I restart off the Leopard disk, and use the disk utility to Repair Disk Permissions. Due to the number of files I idiotically changed, that takes 4 hours.
Now OSX runs fine.. but my Aux drives, Entreri and Akira, have their root directories locked.
•Getting info on the hard drive makes it look like everything's fine.
•Changing the permissions from rwrwrw to rwrwrw just to try and do something doesn't do anything.
•Applying to enclosed items run, but the root directory is still locked.
•Ignoring ownership on the volume doesn't change the locked root folder.
•FileXaminer can't seem to do anything either.
•Attempting to change the permissions in the terminal results in a Operation not permitted error.
•Permissions as reported from terminal: drwxrwxrwx@ 25 root admin 918 Dec 8 14:15 Entreri
•I ran as root, to see if I could fix the problem, but it's the same thing all over.
•When booting from leopard and running disk utility, the hard drive's are still appearing as locked- nothing is wrong with the drives. I was thinking about reinstalling, but if the installer disk sees the drives as locked, I doubted that would make an issue.
Entreri: 500 GB Seagate Barracuda 7200.9
Akira: 80 GB Seagate Barracuda 7200.6 (4 years old or so)
Ryoko: 80 GB Seagate Barracuda 7200.6
Any help would be appreciated. I fully know I screwed up.

Same here, I have 3 extra internal drives and they now show a lock graphic on the desktop icons. If I try and write any files to the drives I get a prompt stating the drive cannot be modified. I'm given an option to Authenticate with my password, but I then get a message that says I don't have sufficient access privileges. I just updated through Software Update but didn't pay attention to what was being patched. I'm guessing a security update screwed this up. I really need my drives because I use them for media production and I have a serious deadline...come on Apple, test things out before sending updates!

Similar Messages

  • Hard Drive Failure After Leopard Install Attempt

    Ok - so here's what up...
    Got a MacBook. Got Leopard. Tried to install. It froze. Log said there was some error, didn't think much of it and so I just chose the restart option.
    When I came back to the choose a startup disk option during the installation... My Internal HD was gone.
    1. Yes, I had foolishly left a USB drive attached. My bad.
    2. God I wish I had checked that error more closely so I knew what to tell you folks now that I am asking for help.
    Anyone got a clue here? I have tried all the reset PMU, PRAM, Disk Utility - nothing is showing me this HD.

    Hi
    You should be able to access Disk Utility from a menu at the start of the Leopard installation process, before or when you're asked to select a destination volume for the OS install.
    If the drive doesn't show in Disk Utility, it may indicate a hardware failure. Hard drives can and do fail, and I guess a fairly disk intensive activity such as an OS install is as 'good' a time as any.
    Hopefully it won't come down to this though as you'd probably have to replace the hard drive, under warranty if applicable.

  • Mac Pro can't find hard drive with Snow Leopard installed on

    Hello there,
    I have a three harddrive setup.
    Harddrive 1 is in bay 1 and has two partitions.
    1: For system and apps
    2: For Documents and stuff
    Hard drive 2+3 are in Bay 2+3 and are combined to a RAID 0 drive.
    Some time ago I installed Leopard and the brand new an formatted hard drive.
    It happened that it always took 2 start ups to run Leopard because always on the first time it didn t find the system on hard drive one. Pushing the 'D' button often helped.
    Of course that was nothing to work with, although I at least could get some work done, once I loaded Leopard successfully.
    So I tried Disk Utility, fsck without success.
    I also tried the way of using fdisk to mark the partion as active, which only resulted in now not being able to boot at all.
    Booting from DVD I also tried choosing my Leopard install on my hard drive as boot device (it has always shown up here) but still without success.
    I am afraid things are quite messed up, since there were a few things happening at one time, which I am not overly happy about now. (Installing new RAM, installing SNOW LEOPARD on the new harddrive 1 in bay one, having still the RAID with LEOPARD on in bays 2+3).
    I am already certain to do a fresh and complete reinstall of the system, I have my backup, but still there is some iTunes music and a few documents I haven't backed up yet, which I'd rather would not like to lose...
    Put it short:
    What could I do to get my system running at least once?
    Thanks a lot,
    max.

    After some research I found out about the nice TargetDiskMode which I used to save all my important data with my MacBook.
    http://support.apple.com/kb/HT1661
    Ready to perform a complete and fresh install now!
    Max.

  • How to restore iTunes library from TimeMachine external hard drive backup after clean install

    I was not able to solve this problem, hence I decided to open this discussion.
    1. Recently, I clean installed Yosemite so my new Mac is completely empty.
    2. I have my time machine backup on my eternal hard drive and would like to restore only specific things - such as iTunes library.
    3. I did not manually copy iTunes library to my drive, I did the TM backup only, but I also do have all the files in my own "music" folder I manually backed-up.
    However, I cannot locate the library there, where is it?
    How do I move the library to my new Mac and then establish a new source folder that would be on my drive?
    PS: Previously, iTunes used my own music folder as a source = it contained all the music files. I had it on an external drive, later moved it to my Mac.
    This leads me to the conclusion that my backup copy of iTunes library did not contain the files anyway.
    Any advice?
    Thank you in advance.

    I am confused as to what you had or have where and when.  The bottom line is, your library (for the standard user) is everything in the iTunes folder.  As far as iTunes' organization and display is concerned, your library is a file called "iTunes Library.itl" which points to all the other host of files and folders normally in the iTunes folder which all work together.
    What are the iTunes library files? - http://support.apple.com/kb/HT1660
    More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
    What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
    Where are my iTunes files located? - http://support.apple.com/kb/ht1391
    iTunes 9 [and later]: Understanding iTunes Media Organization - http://support.apple.com/kb/ht3847 - plus supplemental information about organizing to new structure https://discussions.apple.com/message/26404702#26404702
    Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/docs/DOC-7392 and making an iTunes library portable.
    If you kept everything together in one place then you need to put the whole iTunes folder on the drive where you want it, start iTunes while holding down the option key and guide it to that .itl file.  If things were split up and you had media on the external and the rest of the library on the internal you need to get them back to exactly where they were before.  If you can't find that iTunes folder holding the critical .itl file anywhere then you have a bunch of media tracks and no organization and will need to rebuild the organization from ground level.

  • PowerMac G5 (not Mac Pro) with Radeon X1900 Xt locks after Leopard install

    have a PowerMac G5 (not a MacPro) with an ATI Radeon X1900 XT (w/256 RAM). After installing Leopard, my system crashes regularly, especially after the screen saver kicks in. I also see blue horizontal lines on any display connected to the card. The original Gforce 6600LE remains stable.
    I see all this jabber about the upgrade for the XT card if you are using a MacPro. My card is not THAT card. It was specifically recommended by ATI as being G5 compatible.
    So now I think I may back off of Leopard and go back to 10.4.whatever unless someone can tell me how to get past this unacceptable performance. Apple support has been no help at all.
    Anybody...???
    Vfalzone

    Saw two updates pass by in the last two days: 10.5.2 and another 'Graphic Upgrade'. I mistakenly thought the problems would be corrected. No dice. Still get horizontal lines on any monitor connected to the X1900 Xt card.
    Not too many cards I can get for this box that have dual DVI ports. SO much for my $250+ CARD and Leopard!
    This really *****.

  • Less hard drive space after Lion install

    I have a macbook air with a 64 gig SSD, so storage space is at a premium. I seem to have about 10 gigs less space available after the Lion install. Was there files generated during the Lion install that I can delete, like a backup of the previous install, that would free up some of the lost HD space?

    SOLVED!
    When I ran whatsize as an admin, the first thing I noticed was a .MobileBackups directory chewing up 74GB of space. That reminded me of something I had glanced over quickly in John Siracusa's Lion review on arstechnica.com: http://arstechnica.com/apple/reviews/2011/07/mac-os-x-10-7.ars/18#mobile-time-ma chine
    Basically if you are on a laptop, TimeMachine has a local NFS file server (the volume I saw called MobileBackups earlier) that continues to version everything while you are on the road. It appears to store that in a .MobileBackups directory on your primary HD until you plug in to TimeMachine again.
    Well that's where my space went. Good to know. Thanks for the WhatSize recommendation. Time to go plug this in to TimeMachine and see it go away!

  • Hard drive locked after time machine restore

    Hi guys, I encountered a huge problem while restoring my time machine backup onto my new MabBook Pro. I was running OSX 10.10, the machine is brand new out of the box. I tried to restore my time machine backup onto the new machine, everything was working normally until I was prompted for the admin password to unlock the fire vault and that was the end of it. I received a message saying that there was a problem erasing the destination drive. Now when I boot the computer it goes straight to OSX Utilities. If I go to the disk utility, I can see Macintosh HD but I have no access to it. I can't erase it nor reinstall OSX. Has someone had this same issue? If so, what can I do to format the drive again?
    Thanks a lot!
    Andres

    Thanks for the reply guys.
    Unfortunately none of what you said was helpful ds store. **** of a lot of effort and risk to go through just to get the drive unlocked. It might work though.
    baltwo, thanks for the link. Those computer lingo sentances scare me big time. I'm a photographer, not some IT junkie! Thanks for the link as that got me reading some other posts and I then came accross other variations of " a+rx" that work for some but not for others. Sounded a bid dubios to me, especially since I'll have absolutely no clue as to what to do if things do go pear shape.
    Nevertheless, I found the best sullution: a small app called BatChmod. (http://www.lagentesoft.com/)
    Yeah, just what I needed!

  • I bought Creative suite 5 a few years ago, my computer's hard drive failed, after It was fixed I re installed my program and it now says my Serial number is not valid.

    I bought Creative suite 5 a few years ago, my computer's hard drive failed, after It was fixed I re installed my program and it now says my Serial number is not valid.
    I'm on the last day of a 30 day trail... it won't take my serial number which is the same one that worked before

    Contact support by web chat.
    Mylenium

  • On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder

    Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
    Power on the computer and insert the DVD immediately.
    Hold down the 'C' key to boot from the Snow Leopard DVD.
    http://support.apple.com/kb/ht1533
    After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
    You'll likely need to partition and format the new drive before it's recognized.
    http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
    (Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.)

  • Second hard drive locked

    ok im running 2 hard drives first one is the OS second one is for storage. I somehow changed the permissions and when i restarted it would boot cause it couldnt access the files so i fixed the first hard drive with a archive $ install, and backed everything up to my PC. But i'm still locked out of the second drive, if anyone has any suggestions of how to change or atleast get access to this drive please let me know.

    Hi mjfreaky, and a warm welcome to the forums!
    Open Terminal & paste this in, spaces are important...
    chmod 777 /Volumes/
    then right after the last /, carefully type the name of that external volume, & if it has spaces in it enclose the name in quote marks.
    See this User Tip by Niel:
    I accidentally set a disk's permissions to No Access...
    http://discussions.apple.com/thread.jspa?messageID=2087835

  • Fan  problem after Leopard install

    PowerMac Dual G5 - after Leopard install, fan between hard drive and optical drive revved up like the computer was going to blast off, faster and faster until I powered down by holding down the power button. Leopard seems to be working fine, but with the fan continuing to go at high speed at all times. I've tried reboot, reinstall, pull plug for a few minutes, remove CMOS battery, and zap PRAM, all to no avail. I haven't put the panel cover back on yet, and that may work, but I won't have time to mess with it for a few days and hope for some insight before I try that.Ideas?

    Problem went away. Must have been a ghost in the machine.

  • After Leopard install I have 2 volumes of equal size

    After Leopard install I have 2 volumes of equal size. One has Leopard and the other has Tiger. How can I delete, remove, or get rid of the volume with Tiger on it? As I have upgraded to Leopard how can tell which one I have, i.e., 10.5 or 10.5.X?
    Thanks for your help.

    For some reason the Leopard installer kept your old Tiger partition instead of deleting it. It's probably your fault, but that doesn't matter...
    Before you do this, back up any data you still want from the Tiger partition. Also rename it to something that will differentiate it from your other volume(s?). Also back up your Leopard partition before any of this.
    Take your Leopard install disk, pop it in, reboot while holding C (or just click Install Leopard), choose a language, then from the menubar click Utilities, then Disk Utility. Once there, click your hard drive (not your Leopard or Tiger volumes) in the sidebar, go to the Partition tab on the right, click your Tiger volume's square (NOT YOUR LEOPARD VOLUME!!!), click the minus sign under that little graph, and click Partition. Then once that's done, drag the little resize line thingy on the bottom-left of your Leopard volume's square so that it fills up the entire area there.
    If you can't make the Leopard volume take up the entire drive, you'll have to wipe the entire hard drive and restore from a backup. Yes, you will have to unless you're okay with having less space then you can. (Why can't GParted resize HFS+?!?! WHY?!!?!?!!??!)

  • New Macbook Pro hard drive crash after 9 months?  How to avoid it again...?

    Hi - I've just had my hard drive replaced after it crashed - only after 9 months!!!!  How can this be?  I thought Macs were supposed to be more resilient and reliable?   I always kept the software up to date.
    Is there anything I should be doing to avoid this happening again?  
    - let the battery run down completely / always keep it charged and power source plugged in?
    - don't run too many programmes at once?
    - shut down completely rather than sleep mode?
    If anyone has any tips / advice...otherwise I'm considering selling it.
    Thanks

    You can't just take that drive from the older system and install it in the new system. Even though both run Lion the Lion install on the older system does not have the correct driver set for the new hardware. In fact Apple came out with a newer version of Lion Just For these Newer System.
    It may now be on the Apple servers bot it wasn't a few days, 5-12, ago..

  • New hard drive and cannot re-install Windows 7

    RE:  HP Pavillion DV7-4270us
             Windows 7 64-bit
             4MB Ram   640 GB Hard Drive
    After receiving the S.M.A.R.T. warning about possible hard drive failure soon, I installed a Seagate 500GB hard drive. Next I began the recovery process by using my rescue discs. All that went fine.
    Then the screen stated that after the pc restarts it will load all software and drivers. It will turn off and on several times and this will be normal. Please do not shut down pc.
    Now is where my problem began. It never loaded the software and drivers even after running for 7.5 hours. I new this was extreme.
    I just noticed on this forum someone else had a similar issue. The reply said to be aware and not to install a smaller hard drive than you originally had.
    I am assuming this is my problem also. If anyone knows for sure, please let me know. I suppose I will install a 1TB hard drive, even though that is more than I will ever need.
    Thank you!

    Hi:
    That could be the issue, or the recovery disks you made won't work--even on a 1 TB hard drive.
    Rather than tossing money into a new HDD, if you can read the 25 character product key on the bottom of your notebook, you can make your own plain W7 x64 installation media, which will install on any size hard drive.
    Here is how to do that...
    Link to the W7 ISO file downloads is below. Download the applicable version of Windows 7 that is on your product key (Home Premium, Pro, or Ultimate).  The SP1 Media Refresh files are the latest ISO files.
    http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-Multiple-Languag...
    Use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link  below. You need a DVD or a 4 GB flash drive to use the USB method of compilation.
    Use the 25 character windows 7 product key to activate your installation.
    http://download.cnet.com/Windows-7-USB-DVD-Download-Tool/3000-18513_4-10972600.html
    Then go to the PC's support and driver page to install the drivers you need.
    Before you try the above, see if making this CD patch works for the factory recovery disks.

  • Pravilion dv7 series hard drive replaced after recovery disc fail

    I tried to use the recovery portion of my hard drive when my Pavilion dv7-4173 US laptop failed to operate.  After trying the recovery portion of the hard drive several times I got a error message saying the bootmgr was missing. I Tried using  the Recovery disks I had made at the store I purchased the computer before taking it home and they failed. They worked  up to 32% and then stopped.  I took the laptop and the Recovery discs (6 discs)  to another retail store's tech department. After several days I was told the Recovery Disc where no good/damaged. When I contacted the purchased store I was told  I needed to bring in the laptop and recovery discs. They replaced the hard drive, saying that was the problem, but did not partition it. They decided to up graded the OS system from Windows 7 Home Premium 64 bit to Windows 7 Professional 64 bit., but did not try the Recovery Discs. Can I use the Recovery Disc they made me, if the are good, to restore the laptop back to factory fresh?  I know it will place Windows 7 Home OS system back on the computer, but I'd like all the programs back that came with computer. Will I be able to upgrade the OS to Professional? I have the Windows 7 Professional disc.  If my recovery disc will not work, can I use  the Recovery Disc, only 2 discs as opposed to 6, that I can purchase from HP and then upgrade to Professional?
    This question was solved.
    View Solution.

    Hello skip61.  I want to make sure I understand.  A shop replaced the hard drive for you and installed Windows 7 Profession 64-bit in the process.  They also replaced your bad recovery media with a new set of Windows 7 Profession recovery discs.  is this correct?
    If you want the notebook to revert back to the factory defaults you will need a set of discs from HP directly.  This will properly partition the hard drive and set the notebook back up with Windows 7 Home and the software that came with the notebook. 
    You can upgrade your version of Windows 7 at any time you'd like.  This is a feature built into Windows itself.  So check out this Microsoft article on how to update. 
    To order a set of recovery discs from HP just give them a call.  The number is 1-800-474-6836 for the US/Canada.  If you're outside of this area check this site to get your region's contact information.
    I hope this is helpful; have a great weekend!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

Maybe you are looking for