Hard Drives needs Freeing Up from FCP Renders

Hello . . . Is it just a case of dragging unwanted files and projects into the Trash from the Render Files and Autosave vault to free up space on my G5 Hard drive and External Hard Drive so I can continue to Log and Capture new footage?

That is certainly a way of doing it. Render Files will give you a lot of space (if you have many of them).
Another place to get space back is from your Capture Scratch folders. Careful with these, though, as this is the footage you have used for cutting. If you "Log and Captured" instead of using the Capture Now feature and you still have the tapes, you can recapture later if you need to. So, if you have used "Log and Capture" and you have the tapes and the Project files, you can delete the Captured media from projects you are done with for now.
I don't think you'll get much space back from the Autosaved project files. They just aren't that big.
Be very careful that you don't delete anything you don't know how to get back if you need it. And make sure you only delete what you want to.
You also have to Empty the Trash to get your space. But one last warning: When you Empty it is gone.
Hope that helps!
~Luke

Similar Messages

Full Hard Drive, Need to Delete from DVD Startup

My MacBook/Leopard crashed today while I was in the middle of using it because the hard drive filled up.
When I turn it on now, all I get is the gray screen with the Apple symbol and the spinning loading indicator.
I tried booting into safe mode, but this also got stuck on the start-up screen.
I was able to boot off the Install DVD. I went into terminal and tried to delete some files out of /Volumes/Macintosh HD using the rm command. When I tried to do this, it told me "Read-only file system."
I've been reading on the Internet that I might need to mount the drive to be able to do this, but I can't figure out how to mount the drive.
When I type in "mount", one of the things output is:
/dev/disk0s2 on /Volumes/Macintosh HD (hfs, local, read-only)
I assume this is what I need to mount? Please help, thanks!

there must be a problem with the file system. the disk should mount with write option otherwise. that's what you get for overstuffing a hard drive. you should keep at least 20% drive space free to avoid problems resulting from disk fragmentation. directory damage is one such problem and I suspect this is what happened here. while booted from the DVD start disk utility and repair the drive. then unmount and remount it in disk utility and try trashing some stuff from it again using terminal.

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?

kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

My hard drive needed to be replaced for my iMac. When I move the photos from my portable hard drive back into iPhoto, the pictures show up small and I can't adjust them. How do I fix the pictures so they are full size again?

My hard drive needed to be replaced on my iMac. When I try to move the photos from my portable hard drive back onto the Mac, they are small and can't be edited or made any larger. How can I fix them?

YOu restore your phone from your icloud backup.
http://support.apple.com/kb/HT1766

I need to make space on my Mac. If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again, does it retain all my editing? It does not seem to retain Faces info and I have spent hours and days naming people :(

I need to make space on my Mac. If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again, does it retain all my editing? It does not seem to retain Faces info and I have spent hours and days naming people

There is no way to export Faces information.
I'm not sure why you would do this:
If I copy a folder from iPhoto on to a hard drive, then delete it from iphoto then import it again,
If space is an issue then move the whole Library to an external drive:
Make sure the drive is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
Regards
TD

Acrobat Pro 9 for mac won't launch, reloaded from disk when hard drive needed to be replace. It's in applications folder but there is an X on the Acrobat Reinstall icon. What should I do.

Acrobat Pro 9 for mac won't launch, reloaded from disk when hard drive needed to be replace. It's in applications folder but there is an X on the Acrobat Reinstall icon. What should I do.

Hi Janice,
What version of Mac OS are you using?
Adobe does not recommend migrating the software from one disk to the other.
Please run the setup file for Acrobat and reinstall the software. You might want to delete the existing version of Acrobat installed before reinstalling it.
Regards,
Rave

Need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

I need to re-install CS5.5 on my new hard drive. Serial number from disk package not working.

if there's a problem with the number of installations, you'll see a message about an excess activation problem.
if that's what you're seeing, contact adobe support for an activation count reset, https://helpx.adobe.com/contact.html
otherwise, attach a screenshot of the error message or quote it.

Using ipod as a hard drive to transfer data from PC to Mac

hey, Is is possible to use the ipod as a hard drive to transfer data from/to Mac and windows PCs?
I see no problem transfering data from/to my mac to the ipod. But I cannot see the ipod on the PC. When I plug the USB cable to my windows PC, it shows a popup message "external disk is not formated. Do you want to format it?".
thanks,
Martin

Windows cannot read a Mac formatted iPod.
Macs can read Windows fomratted iPods.
You need to run iTunes for Windows, then Restore the iPod.
It will now work on both Mac and PC.

My WD 2tb external hard drive will not unmount from my MacBook Pro.

My WD 2tb external hard drive will not unmount from my MacBook Pro. It no longer even shows up in finder, however it does show up in Disk Utility. I have tired so many of the suggestions on the internet all to a fail.
I keep getting the message to be sure that all applications are closed before ejecting the drive. I have no clue how to tell which appliactions are using the external drive to shut them off. I turned off Time Machiene to be safe.
I don't need anything on the external drive, I am just trying to erase it, save my current info, and migrate it to my new MacBook Pro.
I have been about four days now with this issue all over the internet, in this community, and watching videos on everything and nothing about this topic to a fail.
I think I am doomed and have lossed this external drive because of some wierd application that will NEVER close on my hard drive for it to disconnect correctly. It's annoying.
Does anyone have a solution?

Have you trie using another USB port? Can you test the USB ports with other USB devices to assure they are working? You may want to reinstall OS X in case there has been a driver glitch.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

I have Adobe Photoshop CS5 installed in two computers. The hard drive of my home computer crashed and I had no time to deactivate the software. The hard drive needed to be formatted. How can I activate the software CS5 again ? Thank you for an answer.

If it's the same computer, same CPU and same HD, no de-activation or re-activation should be necessary.
Install from scratch and apply all updates manually.
Please do a forum search. I and others have repeatedly answered the question about failed updates of CS5 a whole bunch of times recently.
Bottom line: the Adobe auto updater is utterly useless in CS5 and prior versions. You need to download the updates and apply them manually yourself.
I and others have even supplied the links for Mac and Win, which you haven't even bothered to specify.

HT5260 Hi, my name is Gerard and my iphoto library is getting very large I would like to know if I can store all or most of my photos in a external hard drive and access them from Aperture?

Hi, my name is Gerard and my iphoto library is getting very large I would like to know if I can store all or most of my photos in a external hard drive and access them from Aperture?

Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

Upgrading to lion message Hard drive needs osx Journel extended to install

Upgrading from 10.6 to lion i get the message the hard drive needs to be installed on a "osx journel (extended)" hard disk. In disk utility it is in the correct format Any idea's ?

Are you sure it's journalled?
Preferably Mac OS Extended (Journaled), or, if necessary, Mac OS Extended (Case-sensitive, journaled).
If the "Journaled" is missing, just select the partition (indented, under the main line for the drive), and click the Enable Journaling icon in the toolbar (or select File > Enable Journaling in the menubar).

I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty. No music, movies etc are there. Please help thanks

I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty. No music, movies etc are there. Please help thanks

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Windows images, but you get the point. Depending on the age of your library the library file might not include the .itl extention. Make it match the file you are replacing.
See MusicFolder Files Not Added and Super Remove Dead Tracks for tools to catch up with any changes since the backup file was created.
tt2

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair I need to boot off of another source, like my flash drive.

Can I purchase Mountain Lion and make a flash drive bootable? I do not want to install it on my Macbook Pro. I have Snow Leopard on my Macbook Pro now, and due to my hard drive needing repair, I need to boot off of another source, like my flash drive. I am in Paris and my Snow Leopard DVD is in Texas.

Mac OS X has a built-in disk diagnostic and repair program called fsck or file system consistency check. Here’s how to verify and repair your startup disk with fsck. As soon as you hear the startup tone, press and hold Command-S on the keyboard. Keep holding down those keys until you see a black screen with white lettering. This is called “booting into Single User Mode.” As the Mac boots in this mode, the screen reports each step of the process. The line should end in root#. Right after the root# prompt, enter the following: /sbin/fsck -fy
If repairing the disk in single user mode fails, it means one of two things. Either your hard drive itself is failing (a hardware failure), or the directory damage on your hard drive is beyond the capability of the built-in repair procedures in OS X.

I have about 130 gigs of movies on my iTunes and was wondering if I can just put them on my backup hard drive and remove them from my main computer to free up the space

I have about 130 gigs of movies on my iTunes and was wondering if I can just put them on my backup hard drive and remove them from my main computer to free up the space.

I haven't done this with an external drive, but I would imagine it works the same way as if you have multiple internal drives. Also hopefully it works with less headache in OSX than in windows.
Anyway, move all your music over to your external, and then go into itunes -> preferences -> advanced -> iTunes media folder location. Navigate to your drive, and pick the folder you want. Ensure that your folders are set up like they are in your ~/Music/iTunes folder, or wherever your iTunes is currently pointing. Then quit and restart itunes. If your music doesn't show up, try dragging your music folder from your external onto itunes, and it will hopefully update your library.xml.
As far as Jerry's problem goes, you could try adding another music folder to your library.xml, but I really have no idea whether this will work or not. If you want to give it a try (can't promise you won't corrupt your library.xml, so make a copy beforehand) you can find the music folder xml element right near the top of the xml file (open it with textedit/textmate/whatever text editor you want (NOT WORD)). Curious to know if this works, and if it doesn't I have other ideas so let me know.

Hard Drives needs Freeing Up from FCP Renders

Similar Messages

Maybe you are looking for