Hard lockup after a period of time, can't nail down the cause

Hi, all.  New to the forum.  Thanks in advance for any time you spend helping me.  I hope I am able to get my problem outlined to you before I lock up.
I have the MSI Diamond Plus 939 board.  X2 4200+ sits in it, running at 2.2Ghz.  I don't overclock anything.    I have 2Gig of Kingston RAM running at the default values.  My video card is the 7900 GT running in the PCI-E slot.
I lock up after running anywhere from 5 minutes to 4 hours.  Once I lock up, and this is the strange part, the 4 green lights on the D-Bracket stay fully on at the next reboot attempt, and there's no post or video data being sent to the monitor at all.  I have to make repeated attempts to reset the system before the D-Bracket LEDs finally reset to red and begin cycling through on their way to handing everything off to the OS.  These lockups are OS-independent.  I have Vista and XP on two separate HDs.  The HD with XP is IDE and the one with Vista is SATA.  The IDE drive is my system drive, which has the file on it for dual-booting.  I lock up in either OS, and sometimes even while in the BIOS.
I changed my power supply and processor fan (in case it was power purity or heat related), and I've moved/changed cables and tried to eliminate known good items and so forth.
Just tell me what else you need from me and how to get it and I'll give it to you.  This locking up is seriously cramping my style. 
John

All,
Here's something I came up with since my last post.  I ran dxdiag, and here's everything from it.  It's a lot, but better to have it and not need it than need it and not have it, right?    I snipped audio and video driver information where indicated in order to fit this into the post.
System Information
Time of this report: 3/12/2007, 09:11:18
       Machine name: JOHN-PC
   Operating System: Windows Vista™ Home Premium (6.0, Build 6000) (6000.vista_rtm.061101-2205)
           Language: English (Regional Setting: English)
System Manufacturer: MSI
       System Model: MS-7220
               BIOS: Default System BIOS
          Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 CPUs), ~2.2GHz
             Memory: 2046MB RAM
          Page File: 702MB used, 3611MB available
        Windows Dir: F:\Windows
    DirectX Version: DirectX 10
DX Setup Parameters: Not found
     DxDiag Version: 6.00.6000.16386 32bit Unicode
DxDiag Notes
      Display Tab 1: No problems found.
        Sound Tab 1: The file ctaud2k.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL).  You may be able to get a WHQL logo'd driver from the hardware manufacturer.
        Sound Tab 2: The file ctaud2k.sys is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL).  You may be able to get a WHQL logo'd driver from the hardware manufacturer.
          Input Tab: No problems found.
DirectX Debug Levels
Direct3D:    0/4 (retail)
DirectDraw:  0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay:  0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow:  0/6 (retail)
Display Devices
        Card name: NVIDIA GeForce 7900 GT/GTO
     Manufacturer: NVIDIA
        Chip type: GeForce 7900 GT/GTO
         DAC type: Integrated RAMDAC
       Device Key: Enum\PCI\VEN_10DE&DEV_0291&SUBSYS_22111682&REV_A1
   Display Memory: 744 MB
 Dedicated Memory: 248 MB
    Shared Memory: 495 MB
     Current Mode: 1280 x 960 (32 bit) (85Hz)
          Monitor: SONY GDM-400PS/400PST/19PS
      Driver Name: nvd3dum.dll,nvwgf2um.dll
   Driver Version: 7.15.0011.0065 (English)
      DDI Version: 9Ex
Driver Attributes: Final Retail
 Driver Date/Size: 2/10/2007 10:48:00, 4644864 bytes
      WHQL Logo'd: Yes
  WHQL Date Stamp:
Device Identifier: {D7B71E3E-41D1-11CF-7375-1A0201C2CA35}
        Vendor ID: 0x10DE
        Device ID: 0x0291
        SubSys ID: 0x22111682
      Revision ID: 0x00A1
      Revision ID: 0x00A1
      Video Accel: ModeMPEG2_A ModeMPEG2_C ModeVC1_B ModeWMV9_B ModeVC1_A ModeWMV9_A
      Deinterlace Caps: {6CB69578-7617-4637-91E5-1C02DB810285}: Format(In/Out)=(YUY2,YUY2) Frames(Prev/Fwd/Back)=(0,0,0)
                  <snipped>
       DDraw Status: Enabled
       D3D Status: Enabled
       AGP Status: Enabled
Sound Devices
            Description: Speakers (Creative SB X-Fi)
 Default Sound Playback: Yes
 Default Voice Playback: Yes
            Hardware ID: PCI\VEN_1102&DEV_0005&SUBSYS_00231102&REV_00
        Manufacturer ID: 1
             Product ID: 100
                   Type: WDM
            Driver Name: ctaud2k.sys
         Driver Version: 6.00.0001.1261 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: No
          Date and Size: 12/19/2006 12:04:30, 520248 bytes
            Other Files:
        Driver Provider: Creative
         HW Accel Level: Basic
              Cap Flags: 0xF1F
    Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
 Static/Strm HW 3D Bufs: 0, 0
              HW Memory: 0
       Voice Management: No
 EAX(tm) 2.0 Listen/Src: No, No
   I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
            Description: SPDIF Out (Creative SB X-Fi)
 Default Sound Playback: No
 Default Voice Playback: No
            Hardware ID: PCI\VEN_1102&DEV_0005&SUBSYS_00231102&REV_00
        Manufacturer ID: 1
             Product ID: 100
                   Type: WDM
            Driver Name: ctaud2k.sys
         Driver Version: 6.00.0001.1261 (English)
      Driver Attributes: Final Retail
            WHQL Logo'd: No
          Date and Size: 12/19/2006 12:04:30, 520248 bytes
            Other Files:
        Driver Provider: Creative
         HW Accel Level: Basic
              Cap Flags: 0xF1F
    Min/Max Sample Rate: 100, 200000
Static/Strm HW Mix Bufs: 1, 0
 Static/Strm HW 3D Bufs: 0, 0
              HW Memory: 0
       Voice Management: No
 EAX(tm) 2.0 Listen/Src: No, No
   I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Sound Capture Devices
            Description: Microphone (Creative SB X-Fi)
  Default Sound Capture: Yes
  Default Voice Capture: Yes
            Driver Name: ctaud2k.sys
         Driver Version: 6.00.0001.1261 (English)
      Driver Attributes: Final Retail
          Date and Size: 12/19/2006 12:04:30, 520248 bytes
              Cap Flags: 0x1
           Format Flags: 0xFFFFF
            Description: Line-In (Creative SB X-Fi)
  Default Sound Capture: No
  Default Voice Capture: No
            Driver Name: ctaud2k.sys
         Driver Version: 6.00.0001.1261 (English)
      Driver Attributes: Final Retail
          Date and Size: 12/19/2006 12:04:30, 520248 bytes
              Cap Flags: 0x1
           Format Flags: 0xFFFFF
            Description: "What U Hear" (Creative SB X-Fi)
  Default Sound Capture: No
  Default Voice Capture: No
            Driver Name: ctaud2k.sys
         Driver Version: 6.00.0001.1261 (English)
      Driver Attributes: Final Retail
          Date and Size: 12/19/2006 12:04:30, 520248 bytes
              Cap Flags: 0x1
           Format Flags: 0xFFFFF
            Description: Digital-In (Creative SB X-Fi)
  Default Sound Capture: No
  Default Voice Capture: No
            Driver Name: ctaud2k.sys
         Driver Version: 6.00.0001.1261 (English)
      Driver Attributes: Final Retail
          Date and Size: 12/19/2006 12:04:30, 520248 bytes
              Cap Flags: 0x1
           Format Flags: 0xFFFFF
DirectInput Devices
      Device Name: Mouse
         Attached: 1
    Controller ID: n/a
Vendor/Product ID: n/a
        FF Driver: n/a
      Device Name: Keyboard
         Attached: 1
    Controller ID: n/a
Vendor/Product ID: n/a
        FF Driver: n/a
Poll w/ Interrupt: No
USB Devices
+ USB Root Hub
| Vendor/Product ID: 0x10DE, 0x005A
| Matching Device ID: usb\root_hub
| Service: usbhub
| Driver: usbhub.sys, 11/2/2006 03:55:21, 191488 bytes
| Driver: usbd.sys, 11/2/2006 03:55:00, 5888 bytes
|
+-+ Logitech USB G3 (MX518) Optical Mouse
| | Vendor/Product ID: 0x046D, 0xC01E
| | Location: Port_#0001.Hub_#0001
| | Matching Device ID: usb\vid_046d&pid_c01e
| | Lower Filters: LUsbFilt
| | Service: HidUsb
| | Driver: LUsbFilt.sys, 1/23/2007 15:45:00, 28176 bytes
| | Driver: WdfCoInstaller01005.dll, 1/23/2007 15:45:00, 1419024 bytes
| | Driver: hidusb.sys, 11/2/2006 03:55:01, 12288 bytes
| | Driver: hidclass.sys, 11/2/2006 03:55:01, 38912 bytes
| | Driver: hidparse.sys, 11/2/2006 03:55:00, 25472 bytes
| |
| +-+ Logitech HID-compliant G3/MX518 Optical Mouse
| | | Vendor/Product ID: 0x046D, 0xC01E
| | | Matching Device ID: hid\vid_046d&pid_c01e
| | | Upper Filters: LMouFilt
| | | Lower Filters: LHidFilt
| | | Service: mouhid
| | | Driver: LHidFilt.Sys, 1/23/2007 15:45:00, 34576 bytes
| | | Driver: LMouFilt.Sys, 1/23/2007 15:45:00, 33296 bytes
| | | Driver: KHALMNPR.Exe, 1/23/2007 15:44:00, 101136 bytes
| | | Driver: WdfCoInstaller01005.dll, 1/23/2007 15:45:00, 1419024 bytes
| | | Driver: mouhid.sys, 11/2/2006 03:51:12, 15872 bytes
| | | Driver: mouclass.sys, 11/2/2006 04:49:54, 31848 bytes
Gameport Devices
PS/2 Devices
+ PS/2 Keyboard
| Matching Device ID: *pnp0303
| Upper Filters: L8042Kbd
| Service: i8042prt
| Driver: L8042Kbd.sys, 1/23/2007 15:44:00, 20496 bytes
| Driver: i8042prt.sys, 11/2/2006 03:51:13, 54784 bytes
| Driver: kbdclass.sys, 11/2/2006 04:49:57, 32872 bytes
|
+ Terminal Server Keyboard Driver
| Matching Device ID: root\rdp_kbd
| Upper Filters: kbdclass
| Service: TermDD
| Driver: i8042prt.sys, 11/2/2006 03:51:13, 54784 bytes
| Driver: kbdclass.sys, 11/2/2006 04:49:57, 32872 bytes
|
+ Terminal Server Mouse Driver
| Matching Device ID: root\rdp_mou
| Upper Filters: mouclass
| Service: TermDD
| Driver: termdd.sys, 11/2/2006 04:50:28, 50792 bytes
| Driver: sermouse.sys, 11/2/2006 03:51:11, 19968 bytes
| Driver: mouclass.sys, 11/2/2006 04:49:54, 31848 bytes
Disk & DVD/CD-ROM Drives
      Drive: C:
 Free Space: 13.5 GB
Total Space: 152.6 GB
File System: NTFS
      Model: Maxtor 6L300S0 ATA Device
      Drive: F:
 Free Space: 79.2 GB
Total Space: 286.2 GB
File System: NTFS
      Model: n/a
      Drive: D:
      Model: PLEXTOR DVDR   PX-716A ATA Device
     Driver: f:\windows\system32\drivers\cdrom.sys, 6.00.6000.16386 (English), 11/2/2006 03:51:44, 67072 bytes
System Devices
     Name: Marvell Yukon 88E8053 PCI-E Gigabit Ethernet Controller
Device ID: PCI\VEN_11AB&DEV_4362&SUBSYS_058C1462&REV_15\4&258F32F&0&0018
   Driver: F:\Windows\system32\DRIVERS\yk60x86.sys, 9.00.0032.0003 (English), 11/2/2006 02:30:56, 194048 bytes
     Name: Creative SB X-Fi
    Device ID: PCI\VEN_1102&DEV_0005&SUBSYS_00231102&REV_00\4&2411F011&0&4090
<snipped>
     Name: PCI standard RAM Controller
Device ID: PCI\VEN_10DE&DEV_02FF&SUBSYS_72201462&REV_A2\3&267A616A&0&05
   Driver: n/a
     Name: PCI standard RAM Controller
Device ID: PCI\VEN_10DE&DEV_02FE&SUBSYS_72201462&REV_A2\3&267A616A&0&02
   Driver: n/a
     Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_10DE&DEV_02FD&SUBSYS_000010DE&REV_A1\3&267A616A&0&18
   Driver: F:\Windows\system32\DRIVERS\pci.sys, 6.00.6000.16386 (English), 11/2/2006 04:50:57, 140392 bytes
     Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_10DE&DEV_02FC&SUBSYS_000010DE&REV_A1\3&267A616A&0&10
   Driver: F:\Windows\system32\DRIVERS\pci.sys, 6.00.6000.16386 (English), 11/2/2006 04:50:57, 140392 bytes
     Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_10DE&DEV_02FB&SUBSYS_000010DE&REV_A1\3&267A616A&0&20
   Driver: F:\Windows\system32\DRIVERS\pci.sys, 6.00.6000.16386 (English), 11/2/2006 04:50:57, 140392 bytes
     Name: PCI standard RAM Controller
Device ID: PCI\VEN_10DE&DEV_02FA&SUBSYS_72201462&REV_A2\3&267A616A&0&01
   Driver: n/a
     Name: PCI standard RAM Controller
Device ID: PCI\VEN_10DE&DEV_02F9&SUBSYS_72201462&REV_A2\3&267A616A&0&04
   Driver: n/a
     Name: PCI standard RAM Controller
Device ID: PCI\VEN_10DE&DEV_02F8&SUBSYS_72201462&REV_A2\3&267A616A&0&03
   Driver: n/a
     Name: PCI standard RAM Controller
Device ID: PCI\VEN_10DE&DEV_02F4&SUBSYS_72201462&REV_A2\3&267A616A&0&00
   Driver: n/a
     Name: NVIDIA GeForce 7900 GT/GTO
Device ID: PCI\VEN_10DE&DEV_0291&SUBSYS_22111682&REV_A1\4&1BC86A40&0&0020
   <snipped>
     Name: PCI standard RAM Controller
Device ID: PCI\VEN_10DE&DEV_027F&SUBSYS_72201462&REV_A2\3&267A616A&0&06
   Driver: n/a
     Name: PCI standard RAM Controller
Device ID: PCI\VEN_10DE&DEV_027E&SUBSYS_72201462&REV_A2\3&267A616A&0&07
   Driver: n/a
     Name: NVIDIA nForce4 HyperTransport Bridge
Device ID: PCI\VEN_10DE&DEV_005E&SUBSYS_72201462&REV_A4\3&267A616A&0&48
   Driver: n/a
     Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_10DE&DEV_005D&SUBSYS_00000000&REV_A3\3&267A616A&0&B8
   Driver: F:\Windows\system32\DRIVERS\pci.sys, 6.00.6000.16386 (English), 11/2/2006 04:50:57, 140392 bytes
     Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_10DE&DEV_005D&SUBSYS_00000000&REV_A3\3&267A616A&0&B0
   Driver: F:\Windows\system32\DRIVERS\pci.sys, 6.00.6000.16386 (English), 11/2/2006 04:50:57, 140392 bytes
     Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_10DE&DEV_005D&SUBSYS_00000000&REV_A3\3&267A616A&0&A0
   Driver: F:\Windows\system32\DRIVERS\pci.sys, 6.00.6000.16386 (English), 11/2/2006 04:50:57, 140392 bytes
     Name: PCI standard PCI-to-PCI bridge
Device ID: PCI\VEN_10DE&DEV_005C&SUBSYS_00000000&REV_A2\3&267A616A&0&90
   Driver: F:\Windows\system32\DRIVERS\pci.sys, 6.00.6000.16386 (English), 11/2/2006 04:50:57, 140392 bytes
     Name: Standard Enhanced PCI to USB Host Controller
Device ID: PCI\VEN_10DE&DEV_005B&SUBSYS_CB8410DE&REV_A4\3&267A616A&0&59
   Driver: F:\Windows\system32\drivers\usbehci.sys, 6.00.6000.16386 (English), 11/2/2006 03:55:04, 38400 bytes
   Driver: F:\Windows\system32\drivers\usbport.sys, 6.00.6000.16386 (English), 11/2/2006 03:55:11, 223744 bytes
   Driver: F:\Windows\system32\drivers\usbhub.sys, 6.00.6000.16386 (English), 11/2/2006 03:55:21, 191488 bytes
   Driver: F:\Windows\system32\hccoin.dll, 6.00.6000.16386 (English), 11/2/2006 04:46:05, 8704 bytes
     Name: Standard OpenHCD USB Host Controller
Device ID: PCI\VEN_10DE&DEV_005A&SUBSYS_72201462&REV_A2\3&267A616A&0&58
   Driver: F:\Windows\system32\drivers\usbohci.sys, 6.00.6000.16386 (English), 11/2/2006 03:55:05, 19456 bytes
   Driver: F:\Windows\system32\drivers\usbport.sys, 6.00.6000.16386 (English), 11/2/2006 03:55:11, 223744 bytes
   Driver: F:\Windows\system32\drivers\usbhub.sys, 6.00.6000.16386 (English), 11/2/2006 03:55:21, 191488 bytes
     Name: NVIDIA nForce CK8 Conexant 56K Modem
Device ID: PCI\VEN_10DE&DEV_0058&SUBSYS_CB8410DE&REV_A2\3&267A616A&0&68
   Driver: F:\Windows\SYSTEM32\DRIVERS\HSF_CNXT.sys, 6.00.0001.0000 (English), 10/30/2002 18:22:00, 585472 bytes
   Driver: F:\Windows\SYSTEM32\DRIVERS\HSFHWICH.sys, 6.00.0001.0000 (English), 10/30/2002 18:25:00, 152960 bytes
   Driver: F:\Windows\SYSTEM32\DRIVERS\HSF_DP.sys, 6.00.0001.0000 (English), 10/30/2002 18:20:00, 1066752 bytes
   Driver: F:\Windows\SYSTEM32\DRIVERS\mdmxsdk.sys, 1.00.0001.0010 (English), 10/17/2002 16:42:00, 11035 bytes
   Driver: F:\Windows\SYSTEM32\DRIVERS\Nvm353a.cty, 11/12/2002 10:36:00, 250723 bytes
   Driver: F:\Windows\system32\mdmxsdk.dll, 1.00.0001.0010 (English), 10/17/2002 16:37:00, 69632 bytes
   Driver: F:\Program Files\CONEXANT\CNXT_MODEM_VEN_10DE&DEV_00D9&SUBSYS_0C1110DE\HXFSetup.exe, 11.06.0002.0000 (English), 10/7/2002 18:27:00, 303104 bytes
   Driver: F:\Windows\system32\HSFCI005.dll, 5.03.0029.0002 (English), 10/29/2002 16:33:00, 27786 bytes
     Name: NVIDIA nForce Networking Controller
Device ID: PCI\VEN_10DE&DEV_0057&SUBSYS_72201462&REV_A3\3&267A616A&0&98
   Driver: F:\Windows\system32\DRIVERS\nvmfdx32.sys, 1.00.0001.6555 (English), 3/6/2007 13:31:36, 1032104 bytes
   Driver: F:\Windows\system32\fdco1.dll, 1.00.0000.6555 (English), 3/6/2007 13:31:36, 198656 bytes
     Name: Standard Dual Channel PCI IDE Controller
Device ID: PCI\VEN_10DE&DEV_0055&SUBSYS_72201462&REV_F3\3&267A616A&0&88
   Driver: F:\Windows\system32\DRIVERS\pciide.sys, 6.00.6000.16386 (English), 11/2/2006 04:49:20, 13416 bytes
   Driver: F:\Windows\system32\DRIVERS\pciidex.sys, 6.00.6000.16386 (English), 11/2/2006 04:50:18, 42600 bytes
   Driver: F:\Windows\system32\DRIVERS\atapi.sys, 6.00.6000.16386 (English), 11/2/2006 04:49:36, 19048 bytes
   Driver: F:\Windows\system32\DRIVERS\ataport.sys, 6.00.6000.16386 (English), 11/2/2006 04:50:41, 107112 bytes
     Name: Standard Dual Channel PCI IDE Controller
Device ID: PCI\VEN_10DE&DEV_0054&SUBSYS_72201462&REV_F3\3&267A616A&0&80
   Driver: F:\Windows\system32\DRIVERS\pciide.sys, 6.00.6000.16386 (English), 11/2/2006 04:49:20, 13416 bytes
   Driver: F:\Windows\system32\DRIVERS\pciidex.sys, 6.00.6000.16386 (English), 11/2/2006 04:50:18, 42600 bytes
   Driver: F:\Windows\system32\DRIVERS\atapi.sys, 6.00.6000.16386 (English), 11/2/2006 04:49:36, 19048 bytes
   Driver: F:\Windows\system32\DRIVERS\ataport.sys, 6.00.6000.16386 (English), 11/2/2006 04:50:41, 107112 bytes
     Name: Standard Dual Channel PCI IDE Controller
Device ID: PCI\VEN_10DE&DEV_0053&SUBSYS_72201462&REV_F3\3&267A616A&0&78
   Driver: F:\Windows\system32\DRIVERS\pciide.sys, 6.00.6000.16386 (English), 11/2/2006 04:49:20, 13416 bytes
   Driver: F:\Windows\system32\DRIVERS\pciidex.sys, 6.00.6000.16386 (English), 11/2/2006 04:50:18, 42600 bytes
   Driver: F:\Windows\system32\DRIVERS\atapi.sys, 6.00.6000.16386 (English), 11/2/2006 04:49:36, 19048 bytes
   Driver: F:\Windows\system32\DRIVERS\ataport.sys, 6.00.6000.16386 (English), 11/2/2006 04:50:41, 107112 bytes
     Name: NVIDIA nForce PCI System Management
Device ID: PCI\VEN_10DE&DEV_0052&SUBSYS_72201462&REV_A2\3&267A616A&0&51
   Driver: n/a
     Name: PCI standard ISA bridge
Device ID: PCI\VEN_10DE&DEV_0050&SUBSYS_72201462&REV_A4\3&267A616A&0&50
   Driver: F:\Windows\system32\DRIVERS\msisadrv.sys, 6.00.6000.16386 (English), 11/2/2006 04:49:20, 13928 bytes
     Name: AMD Miscellaneous Configuration
Device ID: PCI\VEN_1022&DEV_1103&SUBSYS_00000000&REV_00\3&267A616A&0&C3
   Driver: n/a
     Name: AMD DRAM and HyperTransport(tm) Trace Mode Configuration
Device ID: PCI\VEN_1022&DEV_1102&SUBSYS_00000000&REV_00\3&267A616A&0&C2
   Driver: n/a
     Name: AMD Address Map Configuration
Device ID: PCI\VEN_1022&DEV_1101&SUBSYS_00000000&REV_00\3&267A616A&0&C1
   Driver: n/a
     Name: AMD HyperTransport(tm) Configuration
Device ID: PCI\VEN_1022&DEV_1100&SUBSYS_00000000&REV_00\3&267A616A&0&C0
   Driver: n/a
DirectShow Filters
DirectShow Filters:
WMAudio Decoder DMO,0x00800800,1,1,,
WMAPro over S/PDIF DMO,0x00600800,1,1,,
WMSpeech Decoder DMO,0x00600800,1,1,,
MP3 Decoder DMO,0x00600800,1,1,,
Mpeg4s Decoder DMO,0x00800001,1,1,,
WMV Screen decoder DMO,0x00600800,1,1,,
WMVideo Decoder DMO,0x00800001,1,1,,
Mpeg43 Decoder DMO,0x00800001,1,1,,
Mpeg4 Decoder DMO,0x00800001,1,1,,
Full Screen Renderer,0x00200000,1,0,,6.06.6000.16386
Multiple File Output,0x00200000,2,2,WMM2FILT.dll,
WMT Black Frame Generator,0x00200000,1,1,WMM2FILT.dll,
WMT Import Filter,0x00200000,0,1,WMM2FILT.dll,
DV Muxer,0x00400000,0,0,,6.06.6000.16386
Color Space Converter,0x00400001,1,1,,6.06.6000.16386
WMT Interlacer,0x00200000,1,1,WMM2FILT.dll,
WM ASF Reader,0x00400000,0,0,,11.00.6000.6324
Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,11.00.6000.6324
AVI Splitter,0x00600000,1,1,,6.06.6000.16386
VGA 16 Color Ditherer,0x00400000,1,1,,6.06.6000.16386
Microsoft MPEG-2 Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,11.00.5840.6324
AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.6000.16386
WMT Format Conversion,0x00200000,1,1,WMM2FILT.dll,
9x8Resize,0x00200000,1,1,WMM2FILT.dll,
StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.6000.16386
WMT Virtual Source,0x00200000,0,1,WMM2FILT.dll,
Microsoft TV Caption Decoder,0x00200001,1,0,MSTVCapn.dll,6.00.6000.16386
MJPEG Decompressor,0x00600000,1,1,,6.06.6000.16386
CBVA DMO wrapper filter,0x00200000,1,1,cbva.dll,6.00.6000.16386
MPEG-I Stream Splitter,0x00600000,1,2,,6.06.6000.16386
SAMI (CC) Parser,0x00400000,1,1,,6.06.6000.16386
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.6000.16386
MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.6000.16386
WMT AudioAnalyzer,0x00200000,1,1,WMM2FILT.dll,
Microsoft MPEG-2 Video Encoder,0x00200000,2,0,msmpeg2enc.dll,11.00.6000.6324
Stretch Video,0x00200000,1,1,WMM2FILT.dll,
Internal Script Command Renderer,0x00800001,1,0,,6.06.6000.16386
MPEG Audio Decoder,0x03680001,1,1,,6.06.6000.16386
DV Splitter,0x00600000,1,2,,6.06.6000.16386
Video Mixing Renderer 9,0x00200000,1,0,,6.06.6000.16386
Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,11.00.6000.6324
Frame Eater,0x00200000,1,1,WMM2FILT.dll,
Allocator Fix,0x00200000,1,1,WMM2FILT.dll,
ACM Wrapper,0x00600000,1,1,,6.06.6000.16386
Video Renderer,0x00800001,1,0,,6.06.6000.16386
MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.6000.16386
Capture ASF Writer,0x00200000,0,0,WMM2FILT.dll,
Line 21 Decoder,0x00600000,1,1,,6.06.6000.16386
Video Port Manager,0x00600000,2,1,,6.06.6000.16386
Video Renderer,0x00400000,1,0,,6.06.6000.16386
Bitmap Generate,0x00200000,1,1,WMM2FILT.dll,
Proxy Sink,0x00200000,1,0,WMM2FILT.dll,
DivX Decoder Filter,0xff800000,1,1,divxdec.ax,6.05.0001.0000
Proxy Source,0x00200000,0,1,WMM2FILT.dll,
WM ASF Writer,0x00400000,0,0,,11.00.6000.6324
VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.00.6000.16386
WMT Sample Information Filter,0x00200000,1,1,WMM2FILT.dll,
DivX Demux,0x00600000,1,0,DivXMedia.ax,0.00.0000.0028
File writer,0x00200000,1,0,,6.06.6000.16386
DVD Navigator,0x00200000,0,3,,6.06.6000.16386
WMT DV Extract,0x00200000,1,1,WMM2FILT.dll,
Overlay Mixer2,0x00200000,1,1,,6.06.6000.16386
AVI Draw,0x00600064,9,1,,6.06.6000.16386
Microsoft MPEG-2 Audio Encoder,0x00200000,2,0,msmpeg2enc.dll,11.00.6000.6324
WST Pager,0x00800000,1,1,WSTPager.ax,6.06.6000.16386
MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.6000.16386
Record Queue,0x00200000,1,1,WMM2FILT.dll,
DV Video Decoder,0x00800000,1,1,,6.06.6000.16386
DivX Subtitle Decoder,0x00600000,1,1,DivXMedia.ax,0.00.0000.0028
SampleGrabber,0x00200000,1,1,qedit.dll,6.06.6000.16386
Null Renderer,0x00200000,1,0,qedit.dll,6.06.6000.16386
WMT Log Filter,0x00200000,1,1,WMM2FILT.dll,
MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.6000.16386
Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,11.00.6000.6324
WMT Virtual Renderer,0x00200000,1,0,WMM2FILT.dll,
StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.6000.16386
Smart Tee,0x00200000,1,2,,6.06.6000.16386
Overlay Mixer,0x00200000,0,0,,6.06.6000.16386
AVI Decompressor,0x00600000,1,1,,6.06.6000.16386
WMT MuxDeMux Filter,0x00200000,0,0,WMM2FILT.dll,
NetBridge,0x00200000,2,0,netbridge.dll,6.01.6000.16386
AVI/WAV File Source,0x00400000,0,2,,6.06.6000.16386
WMT Volume,0x00200000,1,1,WMM2FILT.dll,
Wave Parser,0x00400000,1,1,,6.06.6000.16386
MIDI Parser,0x00400000,1,1,,6.06.6000.16386
Multi-file Parser,0x00400000,1,1,,6.06.6000.16386
File stream renderer,0x00400000,1,1,,6.06.6000.16386
WMT VIH2 Fix,0x00200000,1,1,WMM2FILT.dll,
Microsoft MPEG-1/DD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,11.00.5840.6324
AVI Mux,0x00200000,1,0,,6.06.6000.16386
Line 21 Decoder 2,0x00600002,1,1,,6.06.6000.16386
File Source (Async.),0x00400000,0,1,,6.06.6000.16386
File Source (URL),0x00400000,0,1,,6.06.6000.16386
Media Center Extender Encryption Filter,0x00200000,2,2,Mcx2Filter.dll,6.01.6000.16386
AudioRecorder WAV Dest,0x00200000,0,0,,6.00.6000.16386
AudioRecorder Wave Form,0x00200000,0,0,,6.00.6000.16386
SoundRecorder Null Renderer,0x00200000,0,0,,6.00.6000.16386
Infinite Pin Tee Filter,0x00200000,1,1,,6.06.6000.16386
WMT Switch Filter,0x00200000,1,1,WMM2FILT.dll,
Enhanced Video Renderer,0x00200000,1,0,evr.dll,5.00.0001.0001
Uncompressed Domain Shot Detection Filter,0x00200000,1,1,WMM2FILT.dll,
BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.6000.16386
MPEG Video Decoder,0x40000001,1,1,,6.06.6000.16386
WDM Streaming Tee/Splitter Devices:
Tee/Sink-to-Sink Converter,0x00200000,1,1,,6.00.6000.16386
WDM Streaming Data Transforms:
Microsoft Kernel DRM Audio Descrambler,0x00200000,1,1,,6.00.6000.16386
Video Compressors:
WMVideo8 Encoder DMO,0x00600800,1,1,,
WMVideo9 Encoder DMO,0x00600800,1,1,,
MSScreen 9 encoder DMO,0x00600800,1,1,,
DV Video Encoder,0x00200000,0,0,,6.06.6000.16386
MJPEG Compressor,0x00200000,0,0,,6.06.6000.16386
Cinepak Codec by Radius,0x00200000,1,1,,6.06.6000.16386
DivX® 6.5.1 Codec (2 Logical CPUs),0x00200000,1,1,,6.06.6000.16386
Intel IYUV codec,0x00200000,1,1,,6.06.6000.16386
Intel IYUV codec,0x00200000,1,1,,6.06.6000.16386
Microsoft RLE,0x00200000,1,1,,6.06.6000.16386
Microsoft Video 1,0x00200000,1,1,,6.06.6000.16386
DivX® 6.5.1 YV12 Decoder,0x00200000,1,1,,6.06.6000.16386
Audio Compressors:
WM Speech Encoder DMO,0x00600800,1,1,,
WMAudio Encoder DMO,0x00600800,1,1,,
IMA ADPCM,0x00200000,1,1,,6.06.6000.16386
PCM,0x00200000,1,1,,6.06.6000.16386
Microsoft ADPCM,0x00200000,1,1,,6.06.6000.16386
GSM 6.10,0x00200000,1,1,,6.06.6000.16386
CCITT A-Law,0x00200000,1,1,,6.06.6000.16386
CCITT u-Law,0x00200000,1,1,,6.06.6000.16386
MPEG Layer-3,0x00200000,1,1,,6.06.6000.16386
Audio Capture Sources:
Microphone (Creative SB X-Fi),0x00200000,0,0,,6.06.6000.16386
"What U Hear" (Creative SB X-Fi,0x00200000,0,0,,6.06.6000.16386
Digital-In (Creative SB X-Fi),0x00200000,0,0,,6.06.6000.16386
Line-In (Creative SB X-Fi),0x00200000,0,0,,6.06.6000.16386
Midi Renderers:
Default MidiOut Device,0x00800000,1,0,,6.06.6000.16386
Microsoft GS Wavetable Synth,0x00200000,1,0,,6.06.6000.16386
SB X-Fi Synth A [DC00],0x00200000,1,0,,6.06.6000.16386
SB X-Fi Synth B [DC00],0x00200000,1,0,,6.06.6000.16386
WDM Streaming Capture Devices:
,0x00000000,0,0,,
SB X-Fi Audio [DC00],0x00200000,2,2,,6.00.6000.16386
WDM Streaming Rendering Devices:
SB X-Fi DMusic Synth [DC00],0x00200000,1,1,,6.00.6000.16386
Live!2K SpdifOut [DC00],0x00200000,1,1,,6.00.6000.16386
SB X-Fi Synth A [DC00],0x00200000,1,1,,6.00.6000.16386
SB X-Fi Synth B [DC00],0x00200000,1,1,,6.00.6000.16386
SB X-Fi Audio [DC00],0x00200000,2,2,,6.00.6000.16386
BDA Network Providers:
Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.6000.16386
Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.6000.16386
Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.6000.16386
Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.6000.16386
Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.6000.16386
Multi-Instance Capable VBI Codecs:
VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.6000.16386
BDA Transport Information Renderers:
BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.6000.16386
MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.6000.16386
BDA CP/CA Filters:
Decrypt/Tag,0x00600000,1,0,EncDec.dll,6.06.6000.16386
Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.6000.16386
XDS Codec,0x00200000,0,0,EncDec.dll,6.06.6000.16386
WDM Streaming Communication Transforms:
Tee/Sink-to-Sink Converter,0x00200000,1,1,,6.00.6000.16386
Audio Renderers:
Speakers (Creative SB X-Fi),0x00200000,1,0,,6.06.6000.16386
Default DirectSound Device,0x00800000,1,0,,6.06.6000.16386
Default WaveOut Device,0x00200000,1,0,,6.06.6000.16386
DirectSound: SPDIF Out (Creative SB X-Fi),0x00200000,1,0,,6.06.6000.16386
DirectSound: Speakers (Creative SB X-Fi),0x00200000,1,0,,6.06.6000.16386
SPDIF Out (Creative SB X-Fi),0x00200000,1,0,,6.06.6000.16386

Similar Messages

  • After short period of time my messages are disappearing from my Icloud mail account.Why does it happen?Can I restore them back?

    I can't understand my Icloud mail behavior.All messages I sent are stored in sent box as usual whereas messages I receive are disappearing after short period of time (no more then 2 weeks).Why does it happen?Do I have any chance to restore them?

    Unfotunately I'm not eligable for MAC support over the phone and have to take it in to the Genius Bar. Hmmmpf.
    But I was able to isolate the errors (using Console) that occurred just prior to the network failing:
    8/30/09 10:53:05 AM Dock[231] _DESCRegisterDockExtraClient failed 268435459
    8/30/09 10:53:25 AM SystemUIServer[232] * CFMessagePort: bootstrap_register(): failed 1100 (0x44c) 'Permission denied', port = 0x9307, name = 'com.apple.tsm.uiserver'
    See /usr/include/servers/bootstrap_defs.h for the error codes.
    8/30/09 10:53:25 AM com.apple.launchd[196] ([0x0-0xc00c].com.apple.systemuiserver[232]) Check-in of Mach service failed. PID 232 is not privileged: com.apple.tsm.uiserver
    8/30/09 10:53:33 AM GrowlHelperApp[249] WARNING: could not register Growl server.
    8/30/09 10:53:52 AM com.apple.launchd[196] (com.apple.NetworkDiagnostics[259]) Check-in of Mach service failed. Already active: com.apple.NetworkDiagnostic.agent
    8/30/09 10:54:36 AM [0x0-0x1a01a].com.apple.Safari[261] Debugger() was called!
    8/30/09 11:00:50 AM com.apple.launchd[196] (com.apple.NetworkDiagnostics[279]) Check-in of Mach service failed. Already active: com.apple.NetworkDiagnostic.agent
    8/30/09 11:05:52 AM com.apple.launchd[196] (com.apple.NetworkDiagnostics[290]) Check-in of Mach service failed. Already active: com.apple.NetworkDiagnostic.agent
    Any idea what these mean?

  • A connection attempt failed because the connected party did not properly respond after a period of time

    Prior to the Increase Capacity for Outbound Network Calls update, my Azure websites running in
    Standard mode experienced occasional connection attempt failed errors. Since this update the errors stopped but starting on 12/30/14, these errors started up again on both
    South Central and East regions:
    "A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond [IP]:80"
    It occurs when attempting to consume an external web service over HTTP. This issue is not reproducible on our local environments nor did it occur with our previous shared hosting provider.
    On Azure, the same web service call can result in this error or will return a response successfully.
    There doesn't appear to be any pattern as to why the same call would work one time but not another.
    How can this be resolved again? Any feedback is appreciated. Thanks.

    Hi,
    Please have a look at this article:
    http://blogs.msdn.com/b/narahari/archive/2011/12/21/azure-a-connection-attempt-failed-because-the-connected-party-did-not-properly-respond-after-a-period-of-time-or-established-connection-failed-because-connected-host-has-failed-to-respond-x-x-x-x-x-quot.aspx,
    it gives us several ways to solve this issue, hope this helps.
    Best Regards,
    Jambor 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Mail stops receiving messages after a period of time

    Every since installing Mavericks my Mail app stops receiving messages after a period of time. I know because I get the email on my phone, but I try to grab them in Mail and nothing. If I restart Mail then they come through.
    I'm using Gmail as my email provider. Is anyone else suffering with this? Is there a work around?

    Workaround or not, this is an annoyance, and that's a nice way of putting it. Coming from Mountain Lion, when Mail was working flawlessly, having to deal with this issue is just plain ridiculous. What happened to the Mail application? I don't understand how Apple could screw this up to badly.
    Every time I restart or reset the connection to the servers, the Mail app is downloading thousands of messages (I can see the display on the bottom-left). I have no idea what it's doing or why, for that matter. If Apple doesn't fix this soon, I will seriously be forced to look for an alternative, which saddens me greatly. I really like Mail, but if it cannot reliably get my mail simply because I've left it open too long, or hidden it behind another window, I will stop using it.
    What's worse is that I've had similar issues with other applications like iPhoto and iTunes. Whatever is happening to Mail is probably not just application-specific. It's probably OS-specific. I hope Apple is working on it and that we will see a major update to Mavericks soon. All I know is that, right now, I'm seriously regretting upgrading to Mavericks.

  • Photoshop CS6 stops working after a period of time

    Hi,
    I'm having a very frustrating issue with Photoshop CS6. When starting up my Pc or notebook it works just fine and I can open images and create new documents.
    After a period of time (unknown) I can no longer open images or create new documents. There are no error messages appearing at all.
    I have contacted support and to date nothing has worked to resolve this.
    I have un-installed and re-installed Photoshop. I have tried running it without loading preferences etc.
    The application is up to date as is my operating system.
    This is affecting Photoshop on 2 separate installs, my PC and notebook
    Any ideas?
    Running Windows 7
    Cheers
    George

    But this is happening on two different machines, a work notebook and my home PC... surely not the issue?
    Cheers

  • Why does my iPad mini stop responding to wifi after a period of time?

    Why does my iPad mini stop responding to wifi after a period of time?
    For example, I can connect to wifi and use Safari and my iPad's interet capabilities with no problem. But if I then leave my iPad alone for an hour - when I go back to using it, it still shows as being connected to the wifi, but is unresponsive - i.e. web pages will not load etc. - I have to disconnect and reconnect to the wifi to make it responsive.
    In advance, thanks

    Try #5
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Firefox stops working properly after a period of time

    btw, I can't type in this box. I'm typing this in another program and pasting it in.
    Using Firefox 5. I just installed Lion yesterday for Mac, but this problem occurred even before I did so. After a period of time, FF stops working properly. I notice it when I try to open a new tab. It won't switch to the new tab and the screen turns blue. If I type in a web address, it looks like it tries to go there, but it doesn't. When I look at any other already open tab, it has the blue screen. I have to restart to get my proper web pages back.

    Whenever I click on "More System Details" there are several things I hope I won't see. Your Conduit Engine is one of them. It is malware by any reasonable definition and a cause of major problems with Firefox.
    Google for information and advice as to how to get rid of it. Someone may come along with more specific advice..
    If things aren't perfect after that you could do some straightforward troubleshooting(Safe Mode, Problematic Extensions, Hardware Acceleration etc) - in default theme -
    https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes

  • Ovi Maps work, then hang after a period of time

    Hi,
    When I use Ovi maps for navigation, I am able to set up my route, but then after a period of say 10 or 15 minutes, the application hangs and the screen freezes on the last know location.
    I then have to exit out of the app, either by resetting the phone or sometimes just exiting.
    I am then able to set up my route, where again after 10 mins or so it freezes
    I have the latest firmware that is available in the phone, 21.0.004
    The version of maps I am using is V3.04
    I have performed several full factory / system resets, ie where I setup the country and time
    I have no third party apps installed
    I do also notice that quite often the email app does not always automatically push emails to me device, so I again have to turn it off and then back on for it to pick up my emails.
    So I think in summary my device keeps half hanging, if that is possible
    Anyone have any ideas what I can do before taking the device to my local Nokia service centre?
    Thanks.
    Solved!
    Go to Solution.

    ok, I now have a fix,
    Not that anyone was able to assist, but it may help some one in the future.
    I spoke to T-mobile and explained that Ovi maps works when the phone network connection is switched off, but hangs after about 10mins, when the network connection is switched on.
    The guy from T-Mobile then went on to say that there are a choice of two configurations that can be applied to my account, that control picture messaging (Yes I did say picture messaging) He went on to say that he would swap me to the alternative method for picture messaging.
    I assume that picture messaging just controls the down and upload of data, so impacts the data throughput.
    Anyway, he changed my setting on the account, and to my amazement when I went and tested out on the road Ovi maps no longer hung, and now works very well! 
    My biggest shock was that T-Mobile sorted this all out for me in 10 mins! althought it has taken me many months of testing and trying different things
    Cheers

  • Rmiregistry shutdown after a period of time!

    I binded a remote service to the rmiregistry,and start the rmiregistry using a seprate .sh file (not start in the program). I found the rmiregistry will shutdown and exit after a period of time when there're no calls made to the remote service binded.
    It seems that if no calls were made to the remote service, after some time interval, the GDC will collect the remote service, and when there're not a single binded remote service that were not GDCed. the rmiregistry will exit.
    Is my opinion right or not? and what can i do to solve the problem?

    He means me, but I don't have a better answer, except maybe this. Does your .sh script by any chance say
    rmiregistry &If so change it to this:
    exec rmiregistry &The latter is better, because it won't exit when the shell that started it exits, but this is a Unix issue not a Java issue.

  • How to increase RAM & Hard Disk a form at run time can use?

    Question: How to increase RAM & Hard Disk a form at run time can use?
    Explanation:
    I have a problem with a form at run-time. I guess this is due to shortage of RAM/Hard Disk. I want to increase these things so that the form can use more RAM/Hard Disk and it does not crash/cancel. The reason is that when I change/toggle TOOL --> Preferences --> Runtime, Buffer Records and Array Processing parameters, the problem is rectifies intermittantly. That is there is no fix combination of above-mentioned parameters to rectify the problem. After lot of attempts, it gets resolved but only temporarily. Next time I have to modify the form, I get the same problem.
    Please help.

    I am still waiting for an answer to the above question.
    May be Oracle Corp. or anyabody, please guide.
    M. Tariq

  • After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again , it's really frustrating , any solution ??

    After the iOS 7 update my iPhone 5's touch screen is unresponsive some times ,can't even open the lock screen , I had to turn the phone off and turn it on again ,any solutions ?

    Hello kumarsenthil210317
    Check out the article below to start troubleshooting issues with touchscreen response.
    iPhone, iPad, iPod touch: Troubleshooting touchscreen response
    http://support.apple.com/kb/ts1827
    Regards,
    -Norm G.

  • HT201250 I have two external hard drives. One is my Time Machine backup drive.  The other I use for external storage of files (documents, photos, movies, etc).  Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

    I have two external hard drives. One is my Time Machine backup drive.  The other I use for external storage of files (documents, photos, movies, etc).  Can I set Time Machine to backup BOTH my Mac hard drive and my other external hard drive?

    Yes you can make multiple backups on one hard drive, for example if you’ve 1TB hard drive installed in your PC and you’ve two Mac Machines with 500GB drive each then you just make two backup images with size of 500GB each.
    http://www.halfspot.com/use-your-pc-hard-drive-for-time-machine-backup/

  • ADOBE CONTENT VIEWER iPad (ISO5.1) a period of time can not be used

    ADOBE CONTENT VIEWER iPad (ISO5.1) a period of time can not be used, it says "can not update the database, an error occurs, the APP where there is no new version can be updated as soon as possible to solve the problem, thank you!

    ADOBE CONTENT VIEWER iPad (ISO5.1) a period of time can not be used, it says "can not update the database, an error occurs, the APP where there is no new version can be updated as soon as possible to solve the problem, thank you!

  • Dnsmasq stops after random periods of time

    I have had dnsmasq running my localhost adblock since over a year and everything was working fine. However, since several weeks, I noticed that it just stops working after random periods of time.
    I was unable to identify any error, and it starts just fine if I run it after it quits, but after several hours it quits again. Here's systemctl status dnsmasq output:
    Showing one /org/freedesktop/systemd1/unit/dnsmasq_2eservice
    Sent message type=method_call sender=n/a destination=org.freedesktop.DBus object=/org/freedesktop/DBus interface=org.freedesktop.DBus member=Hello cookie=1 reply_cookie=0 error=n/a
    Got message type=method_return sender=org.freedesktop.DBus destination=:1.255 object=n/a interface=n/a member=n/a cookie=1 reply_cookie=1 error=n/a
    Sent message type=method_call sender=n/a destination=org.freedesktop.systemd1 object=/org/freedesktop/systemd1/unit/dnsmasq_2eservice interface=org.freedesktop.DBus.Properties member=GetAll cookie=2 reply_cookie=0 error=n/a
    ● dnsmasq.service - A lightweight DHCP and caching DNS server
    Loaded: loaded (/usr/lib/systemd/system/dnsmasq.service; enabled)
    Active: inactive (dead) since Tue 2014-10-28 22:22:02 CET; 10h ago
    Docs: man:dnsmasq(8)
    Main PID: 2590 (code=exited, status=0/SUCCESS)
    Root directory /var/log/journal added.
    Considering /var/log/journal/8ed49f4f63fc90478b051d8f00000121.
    Directory /var/log/journal/8ed49f4f63fc90478b051d8f00000121 added.
    Journal filter: (((OBJECT_SYSTEMD_UNIT=dnsmasq.service AND _UID=0) OR (UNIT=dnsmasq.service AND _PID=1) OR (COREDUMP_UNIT=dnsmasq.service AND _UID=0 AND MESSAGE_ID=fc2e22bc6ee647b6b90729ab34a250b1) OR _SYSTEMD_UNIT=dnsmasq.service) AND _BOOT_ID=c9b052e6ea8d4c27bb30a0aaf25d5874)
    Root directory /var/log/journal removed.
    Directory /var/log/journal/8ed49f4f63fc90478b051d8f00000121 removed.
    mmap cache statistics: 0 hit, 0 miss

    Just as an update to the above, the same problem occurs in safe mode?

  • Is it possible to have the cellular data switch turn off after a period of time. I would like to minimize the data usage, but often forget to turn off the cellular switch once I have returned to wifi coverage.

    My new iPhone 6+ seems to eat up data at a faster rate than my iPhone 4.  I was advised that turning off cellular data when I am at home or work where I have wifi will keep my cellular data usage to a minimum.  But I have found that I frequently forget to turn it off the cellular once I have finished a task where I needed it. Is there a way to have it turn itself off automatically after a period of time? Thanks

    No, you will have to manually do it.
    Have you look into putting your phone in airplane mode and then connect to wifi.
    iOS: Understanding airplane mode - Apple Support

Maybe you are looking for