Hard reset of my Droid X

Moved for greater exposure

scorp111177, the hard reset usually fixes minor issues with the phone so I'm truly surprised your phone will not reboot up. This is something that doesn't occur often with this device. The information rcschnoor provided is correct. By calling us from a different phone or visiting a corporate store, we can trouble shoot your issue in more detail. If we can not resolve the issue and the phone is under its one year manufacturer's warranty with no physical or water damage, we can replace the device with a certified like new device of the same model.
Additionally, I recommend performing a battery pull for 1-2 minutes to soft reset the device. If your phone powers up but has a difficult time getting past the start up screen or gives you an error message, please report that to the forum so that the community and our vzw representatives can provide you additional information.

Similar Messages

Droid a855 wont hard reset

Hey guys
I've got a droid that I purchased used and I want to do a hard reset to clear out all the previous owners information. I've been searching the internet for answers. The power and x button method does not work, it just boots over and over. The on-screen method resets the phone, but everything is exactly the same after. I'm pretty good with technology, but this is my first smart phone. I brought it to a verizon store and they couldn't get it to reset, or load the older software. Any ideas of what else I could try to perform a hard reset? Thanks

One more question...
Do you know if this phone has been rooted (meaning the phone's firmware has been replaced with something other than the original Moto/Verizon firmwate?)
I have it on good authority that your issue shouldn't at all be possible with the stock ROM, but is definitely possible with a non-factory ROM. If this is the case, the store guys should have caught this quickly.
Just an idea,
Geri O

Phone randomly dies requiring hard reset

Does anyone else have this same issue. My phone randomly dies and requires a hard reset. It has happened to me twice in 10 days. First time I thought that I had let my phones battery get to low but after putting it on the charger for an hour it would not power on using the button... had to hard reset. Second time I am 96.3 % positive it had over 75% battery and it randomly died also requiring a hard reset. I have an iphone5 32GB 6.1.3 version ios. My girlfriend is having the same issue with her Droid so I know it is not just an iphone issue. Verizon please respond.

Good morning Bomgart!
I like to think being random is a great attribute. Sadly, not when it comes to a phone though. But fear not, because we've got a couple of solutions for one of our favorite couples.
Now, there's no doubt that random dying is an illness that does plague a small minority of devices. But, there's a possibility that it may be due to the equipment itself or potentially something that was installed. Based on your description of things, you're up to date in software. And hard resets are a fantastic route to take when experiencing these issues. But, we want to isolate the problem. What I'm going to recommend is doing another hard reset http://vz.to/Sq8I9x . Only this time, test it out before you load on your applications. Also, you may wish to remove those which may not be entirely reputable (battery savers, task killers, etc.). Please let me know how that goes and while we're on the topic, which device does your girlfriend have with us? I've got you covered.
EvanO_VZW
VZW Support
Follow us on Twitter @VZWSupport

Phone really slow and needing hard reset all the time now.

I recently updated my Droid Razr Maxx HD to the latest OTA. Since then it has become very slow and unstable. Every two or three days I will have to perform a hard reset. Going to the apps page is fine sometimes then other times it takes forever to load. Has anyone else had problems like this and if so have you been able to fix it?
Thanks
Gabe Lundy

Update are meant to improve your device gabriellundy! I know how frustrating it must be to have to complete a hard reset on your phone multiple times. Have you tried running your phone on safe mode with out any applications? I would recommend to try this to determine if a third party app is causing issues to your device. To run your phone on safe mode click http://vz.to/12vTROa If you need further assistance with your phone, please feel free to reach out to us for further assistance.
Thank You,
MichelleL_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

ICS required hard reset, now can't access 32GB SD card

Saw message this morning that update 6.16.211.XT912 had been downloaded and was ready to install...said it would take 15 minutes...
45 minutes later, the only thing I could get was emergency dialer. Powered down, powered up same thing.
Called tech support, tried powering on/off again and then told to hard reset.
So after the hard reset, ICS is there and the phone is working....BUT I had encrypted my SD card (32GB) and now when I try to mount it get:
SD Card Password Protection
SD card has been secured by another device and cannot be accessed unless formatted.
Click "OK" and see:
SD Card Password Protection
Failed to verify SD card security settings. Encrypted content is not accessible.
Click OK" and back to settings screen!
Is there anyway to tell the OS what the pin was/is? If not, how do you reformat the card to make it usable again? Does it need to be done off the Razr?
Thanks in advance.

Thanks to both poidude and b33 for the replies...but not seeing these options. OS is 4.0.4 (ICS) and the phone is a Droid Razr...System Version that crashed the phone on install is 6.16.211.XT912.Verizon.en.US.
When I Select "System Settings" from the Home screen (using the "hard button" on the lower left of the phone) I get a nice new ICS screen. The first category is "Wireless and Networks", the second category is "Device". Under "Device" is "Storage". Selecting "Storage" leads you to a screen with Major categories of "Total Phone Storage", "Application Storage", "Internal Storage/MNT/SDCARD".
Under this last category, there is (after a storage utilization bar chart) "Erase Internal Storage" , "Manage Internal Storage";
If I select "Erase Internal Storage", I get "This action will erase the internal storage on the phone.You will lose all the data on the internal storage"; There is a button "Format Internal Storage". There is no option to separately format the SD card.
What may be more relevant is that when the phone boots up, it tries to read the SD card and then displays the "SD Card Password Protection" messages in my original post. So the OS is trying to mount the SD, but because it was encrypted (and from what I have read, the encryption key was stored in internal memory, which got wiped when the Verizon rep had me do a factory reset! There is no way to ever recover this data. Have looked at Motorola and Droid forums on this...it is really bad. DO NOT USE ENCRYPTION. If your phone dies, your data is gone forever)
The thing is, I cannot use the next major category under system settings, which is "SD CARD/ MNT/ SDCARD-EXT" which has only one option, "Mount SD Card"...if I try to mount the card, I get the same "SD Card Password Protection" messages again!
Can anyone who has inserted an SD card into a Droid Razr running 4.0.4. tell me if a brand new SD card is auto formatted? Do you have to "mount" it first? The current Verzion "help" shots are not for 4.0.4....ugh

9630 Keyboard/Buttons not working; hard resets and multiple reloads of OS did not correct

My BlackBerry 9630 Tour is a little more than a year old. Yesterday the keyboard, trackball, and all buttons stopped working while I was typing out an email. I could not power off the Blackberry without removing the battery for a hard reset. Unfortunately, even after many hard resets, the problem persisted, so I went to the forums for help and tried everything that seemed relevant (multiple times) with no success.
After reviewing a number of tech support posts, this problem does not appear to be unique to any given model of BB and contact with liquids is cited as a common but not the only cause for this condition.
I was outside on a very hot and humid day when the malfunction occurred so it is possible some perspiration may have come into contact with the keypad, convenience buttons, or trackball and caused the lockup.
I'm looking for someone with more smarts than me to help me troubleshoot, identify the actual problem, and identify the proper corrective actions. See below for a synopsis of my actions taken, with the exception of taking it to the shop for repair/replacement.
The corrective actions listed on the forums and blogs are varied but essentially fall into two primary solutions:
1. If moisture is suspected to be the issue, let the BB dry out overnight
    a. Pull the battery, naturally air dry or use a blow dryer, let it sit unplugged with no battery for at least 12 hours
    b. If this doesn't immediately work, try a clean install of the OS (see below)
    c. If this doesn't work, take to the shop and they'll either replace the keyboard and/or trackball or replace entire unit
2. If moisture is not suspected to be a factor then perform a backup followed by a clean install of OS
     a. Backup your files using Desktop Manager Backup and Restore
     b. Do a clean reinstall OS using Desktop Manager Application Loader
         i. The OS installation process is dicey and takes a little patience and focus-- you have to wait for the Desktop Manager to properly recognize the device before it can proceed on some of the steps and it may take several iterations to get completely through the process and get the "successful installation" message.
         ii. Further, you may need to keep the battery removed during the initial steps in the process and only insert it when the process gets to the point of actually trying to copy files into the BB memory
            * The BB LCD will display an icon that looks like a battery with a slash through it letting you know the process cannot proceed until a battery is inserted and the Desktop Manager Application Loader will also give you an error indicating it cannot find the device.
            * After inserting the battery, it will take a few seconds or more for the computer to recognize the USB device and for Desktop Manager to respond with the BB password pop-up window.
            * After typing in your BB password, the installation should continue.
    c. If you can get the OS successfully reloaded and your keyboard/trackball/buttons work -- great -- now restore your files and settings using Desktop Manager Backup and Restore and get on with your life.
    d. If this does NOT work after multiple successful clean OS installations apparently you are completely hosed; the only other option is to get it to the shop for repair or replacement.
1.. Does anyone have a troubleshooting procedures that will identify whether moisture is the root cause or not?
2. Is there another corrective procedure that's been missed?

Took BB to Sprint Store and technician took it apart, saw no evidence of moisture or any other damage, and concluded that the keyboard had failed. Not an uncommon occurance.
Also, he told me you cannot simply replace the keyboard, it is integral to the systemboard, so you need to replace the entire device.
He did commend the troubleshooting approach used prior to going to the store -- most folks won't take the time to do even basic troubleshooting (like taking out the battery), they just go to the store and say "fix it please". He confirmed that the steps outlined in the initial post were correct and did not have any other solutions.
Take away:
If you want to do some troubleshooting yourself to check for moisture, the process was pretty straightforward. After watching the technician, most folks with a little technical or mechanical aptitude should be able to manage the dismantling process. You just need a small phillips head screwdriver and a little patience. Good lighting and a magnifying glass or reading glasses also help!

T2 Digitizer frozen after soft,warm,hard resets.Can not get it to calibrate at all.

My T2 occasionally has to be recalibrated. I downloaed DigiFix some months ago and it seemed to help a bit. I hot synced my data last night and all was well. This morning I could not tap my screen to access anything. I tried cleaning carefully around the screen edge, gently cleaned the screen ( no visible damage to the screen noted ), performed a soft reset ( which usually worked ), a warm reset, followed by a soft reset and finally a hard reset ( kept data ) followed by a soft reset and then the big one, a hard reset with loss of data followed with 5 soft resets in a row. I found through the forum a T2 update which I downloaded and is ready to be installed when I next hot sync.
The unit is now frozen with the x in the starting position in the top left corner. Despite my efforts to gently tap all around the X, I can not get it to recalibrate or even get off the calibration screen. If I could just get back to any regular screen, I could get my data back and install this T2 update.
I also downloaded Pocket DVD studio a week ago and have been able to upload .avi files for viewing videos on my Palm. I works beautifully. I think I still have the original Kimoma player on my T2, but never really like it. Can anyone PLEASE help me out? This T2 update is supposed to help according to the infor I found in forum....MANY THANKS!
Post relates to: Tungsten T2
This question was solved.
View Solution.

Thank you for the fina advice. It worked and my T2 is now working perfectly. I think the real trick is using cheap copier paper, not the higher grade stuff or a business card for the cleaning routine. I floded the paper lengthwiase and put a sharp crease in before cutting into little work strips. It took a lot of patience and time to perform a proper cleaning, but it was worth it. Seems that the smallest bit of anything which get trapped under the bezel will throw the T2 into a stupor. Many thanks your your fine advice.....Rgds,John Brown
Post relates to: Tungsten T2

IPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset. What am I missing?

iPhone 5s doesn't ring and goes directly to voice mail. Do not disturb is disabled. Have reset network settings and did a hard reset. What am I missing?

Call your phone carrier - that's a problem for them to resolve.

Trackpad on 2011 i7 MBA has stopped working twice and won't work again until I do a hard reset. Battery is not hot. MBA is 2 weeks old. What's up, Apple?

Twice, shortly after turning on my MBA from a restful night's sleep, my keyboard and trackpad have stopped working. Works fine after a hard reset, but considering this baby is brand new, it shouldn't be happening.
I am in law school and don't have time to leave my MBA with applecare.
HELP!

hello, i have the same problem with my mbp. and you should first shut off your MB. then when is complete off plug in your charger and hold shift+option+command+power and within 10 second you will see the front led flash 10 times more or less and your MB will restart and it should work normal

My iPhone 4 died. I tried charging it for 3 hours; it wont hard reset or even show up on my computer or itunes. is there anything i can do?

My iPhone 4 died. I tried charging it for 3 hours; it wont hard reset or even show up on my computer or itunes. is there anything i can do?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
You can also try going to Settings>General>Reset>Ease all content and Settings. However, you may not be able to restore via iTunes. You might only be able to only restore from iCloud backup if you have a hardware problem,

Mid 2010 MacBook Pro Keeps Hard Resetting

Hi,
I have had my MacBook pro 4 years now since new and for the past week it has started to experience issues. I am running OS X 10.8.4 and it is all up to date. This did not start as a result of adding new software or plugging in any new hardware it just seemed to start by itself.
Sometimes when I turn off my MacBook (either by clicking shutdown or pressing the power button and clicking on the shutdown) it then seems to freeze for a second and then do a hard shutdown - it usually turns itself back on again and then I get the error message on startup saying that my computer restarted because of a problem.
Sometimes when I turn my MacBook on it will not turn on - I can hear the chime but the screen stays black (the keyboard lights do come on) - I have to hold down the power button and try again.
Sometimes when I wake my MacBook from sleep it will do a hard reset similar to above.
I have also had it hard resetting when I open a specific application (Brackets, and today I have tried updating my Java and 3 times in a row mid way through the download it hard reset).
So far I have tried resetting the PRAM and the SMC, I have also verified my hard drive (states it is OK) and the disk permissions (when I verify the disk permissions I get lots of errors about itunes content which when I repair the disk permissions it does not seem to repair as next time I try it is the same again).
There does not seem to be any common theme to any of these as some days it will be fine and others it might take 5 atempts to turn it on and then off again.
When it hard resets and starts up again it get an error log such as this one:
panic(cpu 0 caller 0xffffff7f8de96f1a): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00004160: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff8098a20000 0x0a5480a2, D0, P0/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.5/src/AppleM uxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff80ac793460 : 0xffffff800b81d636
0xffffff80ac7934d0 : 0xffffff7f8de96f1a
0xffffff80ac7935a0 : 0xffffff7f8bf7088c
0xffffff80ac793660 : 0xffffff7f8c04385a
0xffffff80ac7936a0 : 0xffffff7f8c20a2f2
0xffffff80ac7936c0 : 0xffffff7f8c20a408
0xffffff80ac7936f0 : 0xffffff7f8c20ae9e
0xffffff80ac793720 : 0xffffff7f8c20ad73
0xffffff80ac793750 : 0xffffff7f8c303e5c
0xffffff80ac793950 : 0xffffff7f8c303a7d
0xffffff80ac7939f0 : 0xffffff7f8c06e747
0xffffff80ac793a20 : 0xffffff7f8c3037b2
0xffffff80ac793b10 : 0xffffff7f8c06e732
0xffffff80ac793b40 : 0xffffff7f8c301d55
0xffffff80ac793b90 : 0xffffff7f8c32bf20
0xffffff80ac793be0 : 0xffffff7f8c0b5b77
0xffffff80ac793c40 : 0xffffff7f8c0b61ab
0xffffff80ac793cb0 : 0xffffff7f8c32b7c0
0xffffff80ac793cf0 : 0xffffff7f8c30946c
0xffffff80ac793e20 : 0xffffff7f8c06c345
0xffffff80ac793e40 : 0xffffff7f8bf7765f
0xffffff80ac793ef0 : 0xffffff800bc50e58
0xffffff80ac793f30 : 0xffffff800bc4f95a
0xffffff80ac793f80 : 0xffffff800bc4fa89
0xffffff80ac793fb0 : 0xffffff800b8b3257
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.4.5)[49FEF732-D7A3-327B-A7AA-6AC5A6E3DCFF]@0 xffffff7f8de89000->0xffffff7f8de9bfff
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[B5B1F368-132E-3509-9ED5-93270E3ABB DD]@0xffffff7f8de84000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f8be75000
            dependency: com.apple.driver.AppleGraphicsControl(3.4.5)[4A2C8548-7EF1-38A9-8817-E8CB34B8DC A6]@0xffffff7f8de70000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[A35915E8-C1B0-3C0F-81DF-5515BC9002FC]@0xfffff f7f8bdf3000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7f8befb000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7f8beb8000
         com.apple.NVDAResman(8.1.6)[39D35403-42FB-3F08-999C-9866938D6B3A]@0xffffff7f8bf 0f000->0xffffff7f8c1b2fff
            dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f8be75000
            dependency: com.apple.iokit.IONDRVSupport(2.3.7)[F16E015E-1ABE-3C40-AC71-BC54F4BE442E]@0xff ffff7f8befb000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.7)[9928306E-3508-3DBC-80A4-D8F1D87650D7]@0 xffffff7f8beb8000
         com.apple.nvidia.nv50hal(8.1.6)[BF3CC142-4112-3E23-BCE2-CDCFD5811DDA]@0xffffff7 f8c1be000->0xffffff7f8c491fff
            dependency: com.apple.NVDAResman(8.1.6)[39D35403-42FB-3F08-999C-9866938D6B3A]@0xffffff7f8bf 0f000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[2FAEA49C-EA4C-39C6-9203-FC022277A43C]@0xffffff 7f8be75000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12F45
Kernel version:
Darwin Kernel Version 12.5.0: Sun Sep 29 13:33:47 PDT 2013; root:xnu-2050.48.12~1/RELEASE_X86_64
Kernel UUID: EA38B02E-2B88-309F-BA68-1DE29F605DD8
Kernel slide:     0x000000000b600000
Kernel text base: 0xffffff800b800000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 8604629774
last loaded kext at 7530596048: com.apple.driver.AppleHWSensor    1.9.5d0 (addr 0xffffff7f8dc1b000, size 36864)
loaded kexts:
com.squirrels.airparrot.framebuffer    3
com.squirrels.driver.AirParrotSpeakers    1.7
com.apple.driver.AppleHWSensor    1.9.5d0
com.apple.filesystems.autofs    3.0
com.apple.driver.AGPM    100.13.14
com.apple.driver.AppleTyMCEDriver    1.0.2d2
com.apple.iokit.IOBluetoothSerialManager    4.1.7f2
com.apple.driver.AppleMikeyHIDDriver    124
com.apple.driver.AppleHDAHardwareConfigDriver    2.4.7fc4
com.apple.driver.AppleHDA    2.4.7fc4
com.apple.iokit.IOBluetoothUSBDFU    4.1.7f2
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.1.7f4
com.apple.driver.AppleMikeyDriver    2.4.7fc4
com.apple.driver.AudioAUUC    1.60
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.driver.ApplePolicyControl    3.4.5
com.apple.driver.AppleLPC    1.6.3
com.apple.driver.AppleBacklight    170.3.5
com.apple.GeForce    8.1.6
com.apple.nvidia.NVDAStartup    8.1.6
com.apple.driver.AppleSMCPDRC    1.0.0
com.apple.driver.AppleUpstreamUserClient    3.5.12
com.apple.driver.AppleMCCSControl    1.1.11
com.apple.driver.AppleIntelHDGraphics    8.1.6
com.apple.driver.AppleIntelHDGraphicsFB    8.1.6
com.apple.driver.AppleMuxControl    3.4.5
com.apple.driver.AppleSMBusPCI    1.0.11d1
com.apple.driver.AppleSMCLMU    2.0.3d0
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.SMCMotionSensor    3.0.3d1
com.apple.driver.AppleUSBTCButtons    237.1
com.apple.driver.AppleUSBTCKeyEventDriver    237.1
com.apple.driver.AppleUSBTCKeyboard    237.1
com.apple.driver.AppleUSBCardReader    3.3.1
com.apple.driver.AppleIRController    320.15
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.iokit.SCSITaskUserClient    3.5.6
com.apple.driver.XsanFilter    404
com.apple.driver.AppleUSBHub    635.4.0
com.apple.driver.AirPort.Brcm4331    615.20.17
com.apple.iokit.IOAHCIBlockStorage    2.3.5
com.apple.iokit.AppleBCM5701Ethernet    3.6.2b4
com.apple.driver.AppleFWOHCI    4.9.9
com.apple.driver.AppleAHCIPort    2.6.6
com.apple.driver.AppleUSBEHCI    621.4.6
com.apple.driver.AppleUSBUHCI    621.4.0
com.apple.driver.AppleSmartBatteryManager    161.0.0
com.apple.driver.AppleACPIButtons    1.8
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.8
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    214.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2.1
com.apple.driver.AppleIntelCPUPowerManagement    214.0.0
com.apple.kext.triggers    1.0
com.apple.iokit.IOSerialFamily    10.0.6
com.apple.driver.DspFuncLib    2.4.7fc4
com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.1.7f2
com.apple.iokit.IOSurface    86.0.4
com.apple.iokit.IOBluetoothFamily    4.1.7f2
com.apple.iokit.IOAudioFamily    1.9.2fc7
com.apple.kext.OSvKernDSPLib    1.12
com.apple.nvidia.nv50hal    8.1.6
com.apple.NVDAResman    8.1.6
com.apple.iokit.IOFireWireIP    2.2.5
com.apple.driver.AppleSMBusController    1.0.11d1
com.apple.driver.AppleHDAController    2.4.7fc4
com.apple.iokit.IOHDAFamily    2.4.7fc4
com.apple.driver.AppleGraphicsControl    3.4.5
com.apple.driver.AppleBacklightExpert    1.0.4
com.apple.iokit.IONDRVSupport    2.3.7
com.apple.iokit.IOGraphicsFamily    2.3.7
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.IOPlatformPluginFamily    5.4.1d13
com.apple.driver.AppleSMC    3.1.5d4
com.apple.driver.AppleUSBMultitouch    237.3
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.6
com.apple.iokit.IOUSBMassStorageClass    3.5.2
com.apple.iokit.IOUSBHIDDriver    623.4.0
com.apple.driver.AppleUSBMergeNub    621.4.6
com.apple.driver.AppleUSBComposite    621.4.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.6
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.5.5
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.6
com.apple.iokit.IO80211Family    530.5
com.apple.iokit.IOUSBUserClient    630.4.4
com.apple.iokit.IOEthernetAVBController    1.0.2b1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IOAHCIFamily    2.5.1
com.apple.iokit.IOUSBFamily    635.4.0
com.apple.driver.AppleEFINVRAM    2.0
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOHIDFamily    1.8.1
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220.3
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    345
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.8
com.apple.iokit.IOPCIFamily    2.8
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
If anybody has any ideas why it is doing this or suggestion on what I can do to either fix it or diagnose it it would be grateful to hear them

You have the misfortune of having a 15" 2010 6.2 model identifier MBP. It is having GPU problems.
http://support.apple.com/kb/ts4088
Make an appointment at an Apple store genius bar for a FREE evaluation. You will be advised of your options.
Ciao.

Exchange PUSH no longer working. Did a hard reset, and restore nothing

Seems this problem is happening everywhere on HOFO and macrumors. Please someone help. I bought this phone for this reason and I am ready to take it back. I need to get my emails as soon as they come in. Apple support was useless too. They know about the problem, but no fix is available. GRR!
The phone was working fine at first, receiving emails, etc. Then it stopped. It would only pull the emails from exchange when you click on the MAIL button and it goes to the next screen. All the settings are set to Push for exchange. Contacts still sync right away. Email will not. We have over 80 other PDA Windows Mobile phones with no problems. I have tried WIFI, 3G only, neither work. Hard reset, restore, new phone settings, etc. Nothing!
Message was edited by: nizmoz

probably not quite the same issue as yours, but thought I'd mention it. After switching connection types, my iPhone no longer will push or sync mail. I get a server connection error. I've found that vpn'ing in, sync'ing, then turning VPN off will restore push and sync abilities. I'm hoping this gets fixed, by it's my workaround for now.

My iPhone 3gs will not turn on, charge, or allow me to perform a hard reset. iTunes nor my computer recognizes it andthe screen wont light up at all. What can I do to fix this?

I have an iPhone 3gs that is out of warranty. I purchased this phone from AT&T. Last night my phoone went completely dead (battery percentage was at 96% just moments before) and now will not turn back on. I have tried just about everything I have found on discussion boards- trying hard reset, plugging into itunes, charging for15-20 mins then holding down sleep and homebuton..... NOTHING works. This phone will not light up AT ALL. My computer wont even recognize it. Is there anything else I can do?

Make an appointment at an Apple store if there is one nearby.

My apps wont open and i keep downloading new apps, hard resetting, syncing and nothing works! PLEASE HELP

My apps wont open and i keep downloading new apps, hard resetting, syncing and nothing works! PLEASE HELP

Then restore the iPod. First from backup and if problem persists, restore to factory defaults/new iPod.

Problems with partitions after hard reset

Hi hope some can help here, I installed Maverick on my imac and everything seemed fine, I went to work and came home to find a black screen with nothing but the mouse cursor, however the computer wouldnt respond in any way so had to do a hard reset when the computer restarted I would get the Aplle logo and the spinning wheel then the computer would restart it kept doing this over and over.
I restared the computer went into DU tried to repair disk and kept getting errors, my drive is 3TB i have a 1TB primary Partition and a second of 2TB I tried to erase and reformat the primary partition but got an error half way through now both partitons are greyed out with no way or deleting or doing anything with them I have also noticed I no longer have the hard drive make and model in the list just Mackintoh HD and my second partition, to make matters worse my second partition is now unmounted and and when I try to mount it says it needs to be repaired but wont repair, I really need totry and get the data from the second partiton but im struggling, when I tried to reinstall os x it cant see a drive to install to nothing shows up, I even booted using diskwarrior and even it couldnt see the drive, I know this drive is ok this is a software issue the partition table seems to be corrupt or something help!!
Its worth mentioning I had Parallels and Windows 7 on the primary partiton could the windows partiton have caused an issue when I tried to erase and reformat the partition?
Message was edited by: seanybdj

The drive has failed.

Hard reset of my Droid X

Similar Messages

Maybe you are looking for