Hard to use new scrolling system
On Mail and on pages I open online the scrolling bar disappears. I'm not sure what it's called. On this communitity page it's grey and fatter than in Mail and it stays in place.
I think they are moving away from the ancient scrollbar technology.
With all due respect, just because Apple says its out-dated doesn't mean it is. Scroll bars are usability aids. A disappearing scrollbar hinders navigation — you can't see as easily how much of the page you've still got to read or where about you are in it. This is a schoolboy usability error. Luckily, they at least left the option for users to put them back (unlike some of the other design flaws in Lion).
Similar Messages
-
I want to use a new version of iLife (for iMovie and iDVD) but am currently running OS 10.4.11, which won't work with the newer iLife programs. Can i install OS 10.6.3 or 10.7 on an external hard drive, boot to that hard drive and work with the new software (installed on the external hard drive) using my MacBook Pro (circa 2005/6) as the engine while leaving my laptop running 104.11 the rest of the time?
Yes, you can use an external drive. To upgrade, however, means:
Purchase Snow Leopard DVD then update Snow Leopard to 10.6.8.
Access the App Store with your Apple ID and purchase and download Lion.
Your computer must meet system requirements:
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Obviously, you do not have to upgrade to Lion but can stop at Snow Leopard 10.6.8 which is sufficient for the current versions of iLife apps. Note that iDVD is no longer part of the newest version of iLife. Lion 10.7.2 or later is needed should you wish to use iCloud. -
Can I replace internal hard drive using only my system recovery disc?
Hello Everyone and thank you so much for your help!
I have a Vista Desktop and have determined that I need to replace the hard drive.
I am hoping that I can set the jumper pin on the new hard drive to primary, remove the old drive, install the new drive and turn on the computer with the System Recovery (SR) Disc in my DVD drive, boot off of the SR Disc, and run the SR. Will this work or am I just dreaming?
On thing that might cause issues is that the original hard drive is 640GB, and it is no longer available, so the new one I have is 500GB..Everything else about the 2 drives is the same. Old drive: WD6400AAKS, New Drive: WD5000AAKS.
Thank you extra much for any advise you can provide!
Cindy
P.S.. In case it would be helpful to know why I think I need to replace the hard drive...in the mornings when I go to turn the computer on, the hard drive activity light never flashes even a single time and the computer doesn't boot. Through trial and error I have figured out that by doing this:
1) removing power from the computer
2) disconnect then reconnect both connectors to the hard drive
3) reconnect power to the computer
4) depress the computer On button
that the computer will boot and all is good for the day. However, I turn off the computer at night and the next morning have to follow the above procedure. Only removing power from the computer for 30+ minutes does not work, it seems to be necessary to disconnect the hard drive connectors.
This all started at the same time I got a virus on the computer that I was supposedly able to remove.
I have done the following to try to resolve the problem with no success:
1) Ran the diagnostics and passed all Tests, tests say hard drive is okay. (day 1)
3) Cleared the CMOS by removing the battery on mother board (day 1)
2) Did a System Recovery (day 2)
3) Ran Boot.exe /FixMbr (day 3)
4) Ran Boot.exe /FixBoot (day 4)
5) Ran Boot.exe/rebuild bcd (day 5)
I am thinking I must also have a virus on the boot sector that did not get written over when I did the System Recover...but I am a novice computer geek, so I know I could have missed something. :-)Its easy Pal! You check your HDD first but not in the way you did. Just follow the steps with your old HDD.
1. Try a clean install(delete the partitions while installing OS) of other OS like linux or XP or Windows 7.
2. If it works properly the your HDD is OK.
3. Then work for some days with the OS installed to check the condition of HDD.
4. If any problem happens then you need to buy a new one or if its recently bought, go for RMA.
5. If there is no problem, then do a clean install(delete the partitions while installing OS) with your Vista Recovery.
6. Use a Better Security with MSE/Avira/Trand Micro
For Replacing with a different HDD, you must consult nearest HP Service Point for the change in your hardware configuration, so that they will register with Microsoft with the new HDD.
Note: Give the old and new HDD to HP Service Point employee.
** If your problem is solved then Mark this as Answer! **
** Please give Kudos If you want to Thank Me! ** -
HT4910 Having trouble syncing iCalendar with iPhone5 using new iCloud system. Any clues?
I've tried trouble shooting but every time I try to open my Calendar now it tries to sync but just spins and spins and nothing happens.
Any clues what I might be wrong?
And no I cannot get into preferences on iCalendar now since it automatically tries to sync and seems to get stuck.Welcome to the Apple Community.
Have you tried turning calendars off at system preferences > iCloud, restarting and then trying again. -
Hard Drives and video card for new CS5 system
I've read through much of the threads in the hardware forums and find I still have questions. I am just beginning to learn how to edit and it is not a source of income for me at the moment. My sources will be from tapes from my Canon HV20 and at some point either a Panasonic GH2, Canon 60D or similar.
I have bought the following:
ASUS P6X58D-E motherboard
24 GB of Patriot Sector 7 DDR3 1333MHz memory (9-9-9-24)
Intel i7-950 3.06 GHz CPU
I plan to use Cineform NEO or maybe NEO HD to ingest my files.
I also have 4 Seagate 750GB 7200.11 hard drives I can use.
It seems like the best bang for the buck for a video card is a GTS 450 at about $100 because I can't find any data that indicates a GTX 460 or a GTX 570 would make any difference (see http://www.studio1productions.com/Articles/PremiereCS5.htm)
As far as hard drives goes, Harm's article on creating separate storage makes sense to me. It seems like I could create a "4 drive" system quite easily (see http://forums.adobe.com/thread/662972). Given that I am not ready to spend moeny on an Areca card until I can develop my skills, I am wondering if I should get one of the new WD Velociraptor 600GB (SATA 6) drives as my system drive for about $280, a 150 GB (SATA 3) Velociraptor drive for about $100, or some other fast drive.
Given that my motherboard can support RAID, should I consider RAIDing the "D" drive or the "E and F" drives?
Is there any value to using an SSD drive for the "E" drive (page file and media cache) [see http://forums.adobe.com/thread/662972]? Microcenter has a 64GB drive for $100.
Thanks in advance.Hi Harm,
First let me say, I didn't mean to exclude Bill Gehrke. I just didn't know what was what. Thank you for explaining that to me. Let me also say the you and Bill have a great site.
I have a question for you, in the tests I have run with my systems, I am not seeing any speed difference between the 450 and 480. Now granted, they are AMD processors and I know they don't have the SSE 4.1+. Here are my systems that I ran the tests on:
An AMD X4 Quad Core computer running at 2.9 Ghz with 12 gigs of RAM and a single Samsung 7200 rpm SATA 3.0Gb/s hard drive
An AMD X6 Six Core computer running at 3.2 Ghz with 12 gigs of RAM and a single Samsung 7200 rpm SATA 3.0Gb/s hard drive
Both computers were running the same version of the NVidia driver and all non-essential programs were disabled.
When I test the 450 and the 480 in the AMD X4 system, they are turning in pretty much the same level of performance, in that system.
The same holds true with the AMD X6, the 450 and 480 turn in virtually the same level of performance, in this system.
The AMD X6 with either the 450 or 480 does turn in a better performance over the AMD X4 with either video card.
The question.... Are you seeing result that are like this? Where using the exact same computer, turns in the same results with different video cards.
From the number of emails I get about the article, other have reported this to me also. I have had a few people who said when they did see a minor speed increase when they did switch between a 450 and a 480 and a couple who did see a good speed increase.
I am working on changing the article to reflect this and would really appreciate your input or Bills input on this.
I have looked at your benchmark chart and read through the result, but one thing that concerns me when reading some of the results is what programs do they have running in background, if any. And how is that effecting their performance. That is why I used the two systems I listed above to do the tests with. It gives me a controlled enviroment to do test the performance of the video cards in.
As a side note, when I tested the 450 and 480 cards in a friends Intel I7 system, again we didn't see any performance difference between the two video cards, but he did have some programs running in background which may have caused the perfornce results I got.
Best Regards
David Knarr -
I found the operating system very confusing and hard to use. No tutorial. Manual and online help were outdated. Tool bars, programs and documents randomly appeared and disappeared. Programs I installed completely disappeared. Anyone else experience this?
No need to apologize, Jim. I think your rant was justified. For years people have been telling me how easy the Mac was to use. Imagine my frustration when I finally learned from friends and users that it takes weeks or months to make the transition from Windows to Mac.
Still, I agree that I acted to too hastily when I returned my mini-mac to the store only three days after I bought it.
I'm going to try again, this time with an iMac. This time I'll keep it. Since this thread is for the mini-Mac only, I'll probably be starting a new one for the iMac.
Why did I decide to try again? Well, I do like the faster speed and compact hardware of the Macs. I also like the fact that I can install Windows and use that for my programs until I transition completely to Mac, IF I make the complete transition.
Thank you all for your suggestions and advice. I have paid attention to what you said.
Andy -
Is anybody having trouble with your ringer after installing OS 6.0 and using the new GPS system?
The good (?) news is many people are have OS 6.0.1 wifi problems.
I could not connect to my home network. What eventually worked for me (twice now), though it makes no sense, is to go to the particular connection you want to use, hit the little blue arrow on the right to get the details screen. Scroll down to the bottom and change "HTTP Proxy" from "None" to "Auto". Then leave the "URL" field that pops up blank.
This should not work. However, it has for me where many other suggestions have not.
*shrug*
Best of luck. -
I am using a mac mini 2011 an 3gs i phone 2010 macbook white 2008 and a new 2013 apple tv box. When i check info on the cloud I get 'upgrade your operating system to the latest. My question is is it possible to use the icloud system without an upgrade
iCloud requires OS X 10.7.2.
-
can I use my new iphone 5 with my old iHome iD9SVC speaker system if I get an adapter? or should i just buy a new speaker system made specifically for the iphone 5?
Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.
-
i am new in using Mac operating system, kindly suggest ebooks, videos or audio books to me so that i can learn more about it.
any kind of help would be appriciated. i am very eager to learn.how to make ios application? and how to effectively use terminal? where does the basic programming start in Mac? what are the different tools that can help me make an Mac application and ios application.
-Thank you
Shailendra (India)Apple has got some great guides to start developing in Objective-C, used for programming OS X and iOS apps > http://developer.apple.com/library/mac/#referencelibrary/GettingStarted/RoadMapO SX/chapters/01_Introduction.html
-
After upgrading the new operating system on my Droid Razr M it seems some useful features no longer work such as when typing a message the text anticipates the next word and when trying to delete individual messages from a contact, you can no longer tap and hold to select multiple message you have to delete them individually or the entire thread. Is there a way to get these back?
Well, that's kind of embarrassing. And I honestly thought I paid attention to that... It works perfectly now, thank you so much!
As expected, cdm-git also works fine since DMs only work in the root mode as of now.
Just for the record, both type commands output "/usr/bin/startx" and pacman -Q gives "systemd 215-4".
Last edited by looki (2014-08-23 13:04:49) -
The problem is with the new operating system and sending photo via email when used in my iPad.
From photo I selected 3 photos to send via email. I choose the upload key and choose to send by email. Typing text on the email is very slow. This is solved by saving the email as a draft and opening the email again from mail.
Can you amend he system to allow emails to be sent from photo as previously.Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off" -
Currently have 30K pics on PC Win. 7 laptop using PSE 8, corrected issues and did full backup on portable hard drive plus saved (Extensive) Keyword tags to file. Installed PSE 13 on PC Win 8.1 laptop. Will attach same portable Hard drive to new laptop. How do I import prev Keyword Tags from file and Restore catalog from port. HD to new PC and in what order? I have not opened PSE 13 on new PC yet. Would like to do it right the first time!
No importing needed.
See these instructions: Use Backup, Restore to move catalog | Organizer | Elements 6 or later -
I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB. I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message
I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB. I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message
-
The new format is just harder to use
The new format, imho, is just harder to use. You need to click all over the place after logging in to see changes to the discussions you've contributed to, to locate discussion groups, etc. The old site was just more user friendly, though not as pretty.
I for one would like the option to use and see the old interface.
Eddie OHi, Marlinespike -
I can't find my last posts or my last questions. I don't have a clue as to how to find anything.
Copy/pasting a reply I gave to someone else a couple of days ago here, with modifications...
If you go to the main page of this site (https://discussions.apple.com/index.jspa) and then the Your View (personalize) tab—which you should set as the default—you can set yourself up to watch pretty much anything you're interested in, including all of the topics you're participating in.
To watch your own topics, choose the Watch A User widget and drag that widget down into the body of the page, placing it wherever you like.
Once you've placed the widget, click the disclosure triangle in the upper right and choose 'Edit this widget.'
Next, enter your name in the Username field. (It defaults to Yourself.)
Give your widget a custom title, select which categories of your content you'd like to appear in the widget, and enter how many results you'd like to appear in the widget (max is 100)...
Click Save Properties, and voilà...
Finally, look back at the top of the page, and click Publish Layout, and you're done.
(Note that for all of the available information to appear in this widget, you have to choose a layout for your home page that includes at least one column that's half the width of the page or larger....)
Maybe you are looking for
-
Timeline Codec Not Found Issue
I inherited a project from another editor and recently tried to open the project. I can open the project, but the timeline and canvas are not showing up - when I double click to open the Sequence she was working in to open the timeline I get the foll
-
Counting Total No.of Idocs received in BPM
Hi Experts, My scenario is " I am getting three different Idocs from three interfaces. Now i want to count total number of idocs from all the interfaces and compare this count with the one of the idoc field(Which contains the total num
-
Multiple JREs installed - how to select correct one?
Hi all I have multiple JREs installed on my computer, which I need to keep. I'm doing some development, and when I try to run the class, I get the following error: Exception in thread "main" java.lang.UnsupportedClassVersionError: HelloWorldApp (Unsu
-
How do I change Digitized Date
I need to change the digitized date in some of my photos in iPhoto '08. The Adjust Date & Time function only changes the original date/time and the Batch Change function doesn't offer an option to change the digitized date either.
-
Hi... I want to create a data warehouse (dimensión, cubes) using OEM 10g ... i found some examples about how to create this objects and i saw that OEM 10g in examples have an OLAP option that i can´t see in my OEM. The questions is .. how do i enable