Hardcode and open source
technically, what does hardcode and open source mean?
And, jasper reports and ireports, they are used for report generation in java ryt? is report generation a separate process? or is it embedded in a java app?
Duplicate thread.
Similar Messages
-
[Solved] Slow graphics with RS780M and open source ati driver
EDIT: Well this is embarrasing. Guess this is why there's a new comers forum. I assumed since I installed a couple days ago my system was up to date. However, running pacman -Syu updated my kernal and it works fine now. SOLVED (I'm an idiot)
Hello Arch community. I've been using Ubuntu for a couple years so know that my hardware can work well enough with linux. Almost everything works great with arch with little setup, but I'm stumped as to how to setup the graphics card.
I'm attempting to use the open source drivers, either xf86-video-ati or xf86-video-radeonhd (I don't care which I use in the end). I have both installed so I can try out both, assuming that doesn't cause problems. I've never tried using the catalyst driver in arch, so I know I don't have remenents of that causing problems. Right I have gnome working, but when dragging a window, resizing a window, scrolling, or watching a video I can see the screen slowly refresh. It is definetly not right.
Here's the information that might help:
[jake@myhost ~]$ lspci | grep Radeon
01:05.0 VGA compatible controller: ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics]
I've tried various configurations. Right now I'm running without an xorg.conf. This is /var/log/Xorg.0.log from the setup without an xorg.conf
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux myhost 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009 i686
Build Date: 28 May 2009 10:40:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 23 11:58:06 2009
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:5:0) ATI Technologies Inc RS780M/RS780MN [Radeon HD 3200 Graphics] rev 0, Mem @ 0x80000000/268435456, 0x92300000/65536, 0x92200000/1048576, I/O @ 0x00005000/256
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD Graphics, ATI Radeon Graphics,
ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
ATI Radeon Graphics
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:05:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[30] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[31] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[32] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[33] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[34] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[35] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[34] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[36] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[38] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 0000000092300000
(II) RADEON(0): MMIO registers at 0x0000000092300000: size 64KB
(II) RADEON(0): PCI bus 1 card 5 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon HD 3200 Graphics" (ChipID = 0x9612)
(WW) RADEON(0): R600 support is mostly incomplete and very experimental
(--) RADEON(0): Linear framebuffer at 0x0000000080000000
(II) RADEON(0): PCI card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x103c SubsystemID: 0x30f2
IOBaseAddress: 0x5000
Filename: BR28896C.bin
BIOS Bootup Message:
HP_QT8 RS780M DDR2 200e/500m
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 500000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 14320
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:05.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
(II) RADEON(0): using shadow framebuffer
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling disabled
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 1432, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 500.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=1432 rd=12 min=64800 max=120000; xclk=40000
(WW) RADEON(0): LVDS Info:
XRes: 1280, YRes: 800, DotClock: 69300
HBlank: 135, HOverPlus: 48, HSyncWidth: 32
VBlank: 16, VOverPlus: 3, VSyncWidth: 6
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output LVDS has no monitor section
(II) RADEON(0): I2C bus "LVDS" initialized.
(II) RADEON(0): Output HDMI-0 has no monitor section
(II) RADEON(0): I2C bus "HDMI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: LVDS
Connector: LVDS
LCD1: INTERNAL_KLDSCP_LVTMA
DDC reg: 0x7e50
(II) RADEON(0): Port2:
XRANDR name: HDMI-0
Connector: HDMI-B
DFP1: INTERNAL_UNIPHY
DDC reg: 0x7e60
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
finished output detect: 0
(II) RADEON(0): I2C device "LVDS:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
finished output detect: 1
(II) RADEON(0): I2C device "HDMI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
finished output detect: 2
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output VGA-0 disconnected
(II) RADEON(0): Output LVDS connected
(II) RADEON(0): Output HDMI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output LVDS using initial mode 1280x800
after xf86InitialConfiguration
(==) RADEON(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[20] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[21] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[22] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[23] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[24] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[25] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[26] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[33] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[34] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[35] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[36] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[37] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[38] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit 80000000 0 0
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x10000000
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Allocating from a screen of 262144 kb
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
(II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 255712 kb for X Server offscreen at offset 0x00648000
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(WW) RADEON(0): Direct rendering disabled
(EE) RADEON(0): Acceleration initialization failed
(II) RADEON(0): Acceleration disabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Textured video requires CP on R5xx/R6xx/R7xx/IGP
Output CRT1 disable success
Output DIG0 transmitter setup success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 0 success
Disable CRTC 0 success
Disable CRTC memreq 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
Output DIG0 transmitter setup success
Mode 1280x800 - 1415 816 10
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0x00cf00c0 0x00cf00c0
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
freq: 69300000
best_freq: 69298571
best_feedback_div: 813
best_ref_div: 14
best_post_div: 12
(II) RADEON(0): crtc(0) Clock: mode 69300, PLL 69290
(II) RADEON(0): crtc(0) PLL : refdiv 14, fbdiv 0x32D(813), pdiv 12
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DIG0 transmitter setup success
Output DIG2 encoder setup success
Output DIG2 encoder setup success
Output DIG0 transmitter setup success
Output DIG0 transmitter setup success
Enable CRTC memreq 0 success
Enable CRTC 0 success
Unblank CRTC 0 success
Output DIG0 transmitter setup success
Output CRT1 disable success
(II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
Output DIG0 transmitter setup success
Blank CRTC 1 success
Disable CRTC 1 success
Disable CRTC memreq 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event13"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "3"
(**) Option "TapButton3" "2"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
Dac detection success
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x800"x0.0 69.30 1280 1328 1360 1415 800 803 809 816 -hsync -vsync (49.0 kHz)
(II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
(II) RADEON(0): EDID data from the display on output: LVDS ----------------------
(II) RADEON(0): Manufacturer: AUO Model: 2774 Serial#: 0
(II) RADEON(0): Year: 2007 Week: 1
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): No DPMS capabilities specified
(II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) RADEON(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 69.3 MHz Image Size: 331 x 207 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1415 h_border: 0
(II) RADEON(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 816 v_border: 0
(WW) RADEON(0): Unknown vendor-specific block f
(II) RADEON(0): AUO
(II) RADEON(0): B154EW02 V7
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0006af742700000000
(II) RADEON(0): 01110103802115780a1cf59758508e27
(II) RADEON(0): 27505400000001010101010101010101
(II) RADEON(0): 010101010101121b0087502010303020
(II) RADEON(0): 36004bcf100000180000000f00000000
(II) RADEON(0): 00000000000000000020000000fe0041
(II) RADEON(0): 554f0a202020202020202020000000fe
(II) RADEON(0): 004231353445573032205637200a0071
(II) RADEON(0): EDID vendor "AUO", prod id 10100
(II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
I've also tried it with many xorg.conf files without finding any which give me the same graphics performance I have in ubuntu. Here's the one I was using, with the comments showing some other things I tried.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri"
Load "extmod"
Load "dbe"
Load "dri2"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 30.0 - 60.0
VertRefresh 55.0 - 70.0
#Option "UseEdidFreqs" "1"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
#Driver "radeonhd"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "RS780M/RS780MN [Radeon HD 3200 Graphics]"
BusID "PCI:1:5:0"
#Added optimizations
Option "AGPMode" "8"
Option "ColorTiling" "on"
Option "AccelMethod" "EXA"
#Option "AccelMethod" "XAA"
#Option "EnablePageFlip" "on"
#Option "AGPFastWrite" "yes"
#Option "XAANoOffScreenPixMaps" "1"
Option "RenderAccel" "true"
Option "DRI" "On"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Extensions"
# Option "Composite" "On"
Option "Composite" "Disable"
EndSection
#Section "ServerFlags"
# Option "AIGLX" "On"
#EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Just in case this help:
[jake@myhost ~]$ modinfo radeon
filename: /lib/modules/2.6.29-ARCH/kernel/drivers/gpu/drm/radeon/radeon.ko
license: GPL and additional rights
description: ATI Radeon
author: Gareth Hughes, Keith Whitwell, others.
depends: drm
vermagic: 2.6.29-ARCH SMP preempt mod_unload 686
parm: no_wb:Disable AGP writeback for scratch registers (int)
[jake@myhost ~]$ modinfo drm
filename: /lib/modules/2.6.29-ARCH/kernel/drivers/gpu/drm/drm.ko
license: GPL and additional rights
description: DRM shared core routines
author: Gareth Hughes, Leif Delgass, José Fonseca, Jon Smirl
depends: agpgart,i2c-core
vermagic: 2.6.29-ARCH SMP preempt mod_unload 686
parm: debug:Enable debug output (int)
Any ideas?
Last edited by Coward (2009-06-25 06:40:51)Coward wrote:I can't see a way to mark this thread as solved or anything, but it is solved.
Just click edit on the lower right of your first post and you can edit the subject
http://bbs.archlinux.org/viewtopic.php?id=50161 -
X11 and open source ATI drivers
Hi. Well I have a little(big) broblem. I have ATI Radeon x1600 video card, and I need open source video drivers (not fglrx). I installed it by the article at archlinux wiki:
Open Source ATI Drivers
The open source drivers will work to some degree on Radeon chipsets up to the Radeon X850. Radeons up to the 9200 series are fully featured, stable, with full 2D and 3D acceleration. Radeons from 9500 to X850 have full 2D acceleration, the y provide 3D acceleration as well but it doesn't support all the features that the proprietary drivers do. A full list of supported chipsets can be found here.
[edit]
Installation and Configuration
The package is xf86-video-ati. Note: if you have previously installed the proprietary driver make sure to remove fglrx, fglrx-beyond, and fglrx-utils.
pacman -S xf86-video-ati libgl-dri
Edit your xorg.conf, and add or make sure you have the following in their given sections. For
Section "Module"
Load "glx"
Load "dri"
Load "drm"
EndSection
Section "Device"
Identifier "name" # your alias
Driver "radeon"
Option "XAANoOffscreenPixmaps" "true" #needed for aiglx
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
When using this driver, make sure you do not have fglrx-utils installed but use libgl-dri instead. Otherwise you'll have the wrong libGL.so which will cause direct rendering not to work.
So I did all this crap and i get, when i tryed to start X:
(EE) Failed to load module "glx" (module does not exist, 0)
(EE) Failed to load module "radeon" (module does not exist, 0)
My xorg.conf:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "drm"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" ""
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "Monitor0"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
Driver "radeon"
Option "XAANoOffscreenPixmaps" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Group "video"
Mode 0666
EndSection
Any help? =/I may be wrong, but I dont think the open source drivers support the X1xxx series cards.
If I am wrong, then make doubly sure you actually did install xf86-video-ati and libgl-dri. Then, maybe try starting from a fresh Xorg.conf by running this as root in the console (without X started):
cp /etc/X11/xorg.conf /etc/X11/xorg.conf.bak
X -configure
mv xorg.conf.new /etc/X11/xorg.conf
And see if that works, if it does, slowly build on top of it, until you have your desired result -
X11 and open source applications issues
I have a brand new iMac 20 w/ OS X 10.4.8/ Core Duo 2.16/ ATI X1600 w/ 256 mb vram/ 1 gb of system ram. I have been using open source systems for almost two years and would like to continue to use some of the applications which are provided for Macintosh. When attempting to install any of the X11 applications, I get a message saying that I need to have X11 installed in order to install and run the apps. I downloaded the Apple X11 1.0 installer because I did not see X11 on my system. When trying to install it, I got a message saying that it could not be installed because there is a more up to date version already installed.
So, the installers for applications such as, Open office and Gimp Shop, do not see that I actually have X11 installed and they will not install because of it. I do not know enough about OS X to work through this issue.
Any help will be greatly appreciated.
Thanks,
zeusx64I did not see another version of X11 but I did go into the installation of the optional items and did not see it listed. I am fairly well versed in using computers, so I am not a complete noob but I am fairly new to Mac itself.
I have FreeBSD experience, which in itself, gives a bit of X11 experience.
That said, I have already looked for needed packages to install, tried to install and as I said before, I recieved the message during the attempted install of X11, which said I already had a more up to date version installed.
If I have by chance missed something along the way, feel free to provide a link to the needed package.
I am open to learning all that I can and realize that we all are in a never ending process of that learning.
Thanks for the replies and I hope we can figure out what I have not on my own.
I will check my mail when I am at home after work.
Thanks again. -
DLL, jar and open source...HELP!
So...having asked about various OCR programs etc on here, I thought I would just ask something that has been bugging me hugely. I realise I am a total newb, but could really do with some help.
Basically, I have this problem.
I got the Asprise OCR engine working like a treat by copying the DLL to the suggested directory and then linking the jar file to my project as suggested on here. Worked like a charm. However, Asprise OCR has an annoying trial feature that requires you to click a "No Thanks" button every time it recognizes a piece of text. Not too useful when you are trying to see how well an automated OCR app works. To buy it costs over $1000 and I simply don't have that luxury.
So I googled free OCR engines, and came up with two open-source projects, Tesseract [(http://code.google.com/p/tesseract-ocr/)|http://code.google.com/p/tesseract-ocr/] and GOCR [(http://jocr.sourceforge.net/index.html)|http://jocr.sourceforge.net/index.html] .
I posted a thread on here to ask how Tesseract might be used with Java, and was sent to their forum to ask my question again. However, over a week later, I still have no reply from them.
Tesseract seems to have a DLL but no jar, so seems to not work in the same way as Asprise at all. They talk about makefiles in their documentation etc, but as a COMPLETE NEWB I am really having trouble getting my head around this.
Basically, I think my trouble starts with the fact that I don't really understand how to use the source code to work with Java, and there really isn't much documentation on these engines.
Could someone suggest a best plan of action for me?
Thanks!
Dan
:-DMy guess is that to have these DLL's work with your program you are going to have to learn a bit of C++ and how to use the Java JNI library. To some here, this is easy to do, but for others (me), it is very difficulty. Hopefully it will be easy for you. Best of luck.
-
New Blog and Open Source Project
All,
I just wanted to let everyone know I've recently release a new blog and an open source project called tapiGen.
The blog can be accessed here:
http://www.danielmcghan.us/
and tapiGen can be downloaded here:
http://sourceforge.net/projects/tapigen/
Please let me know if you have any questions.
Regards,
DanDan,
Great work, I'll definitely be giving this a thrash once I get back from ODTUG (see you there!).
John.
http://jes.blogs.shellprompt.net
http://www.apex-evangelists.com -
Time capsule and open source client
I'm using my MacBook Pro with a 500GB Time Capsule. I use an open source client to share large files with teammates of mine because it is a lot faster than email. Problem is, whenever I use the TC, it cannot connect. If I have ethernet to MBP, it works just fine. Is this a firewall setting, or something else? Any ideas as to what I can do to access the client while using the TC? I'm very much a newcomer to the realm of Apple products.
just leave the TC on it is designed for that.
-
Powersave and open-source ATI drivers
Hi everybody, another ATI-driver-issue here...
I have a laptop with an HD3470 graphic card. Before Xorg 1.6 I used the catalyst drivers from the main repository, and I was quite happy. After the upgrade to the new Xorg i moved to open drivers, but I have some complaints about power saving features. I hear a fan spinning at high speed (I suppose it's VGA fan), and the keyboard becomes very hot; battery life seems considerably shorter than before. According to this:
http://www.x.org/wiki/RadeonFeature
radeonhd doesn't have any power save feature implemented yet, so I installed the xf86-video-ati driver which should implement most of the Powerplay features. But I saw no big difference between radeonhd and ati.
Does anyone know if the powersaving in ati is to be enabled in some way? Or how efficient it is, compared to the closed driver?
ThanksI've been able to install catalyst 9.5 from AUR. There's no contest: proprietary driver is king in power managment, up to now. My laptop ran damn hot with the open driver, now it is noticeably cooler. I've no data about battery life but I suppose it's increased.
It's a pity that open drivers that are so good in features completely lack power saving, which is a priority in my opinion even in desktops...
Last edited by snack (2009-05-22 20:25:04) -
Business One and Open Source Web Front-Ends, PHP etc.
Hi there,
I am a complete newbie to all things SAP, so please excuse my ignorance.
I am trying to implement a solution for SAP Business One, including a web front-end for queries and information. The SAP backend is running on a SQL Server, Windows 2000.
The catch is, I won't be running the web front-end off a Windows server. I need to find a solution for an Apache server, running (probably) PHP but could be JSP or any other scripting language to access SAP - but it will be running on a separate server, non-windows.
I have been given examples of people getting access to the DI Server using PHP, but it all involves a call to a COM() function that won't run from anything except a Windows server.
How can I acheive the same result running a PHP page from an OpenBSD or Linux / Apache server? Is the DI Server the right thing to be looking at, or am I going in completely the wrong direction?
Any help would be appreciated.
Thanks,
Nick.post your question in SAP Business One SDK for better response.
Regards
Raja -
[Solved] Artifacts with ATI Radeon HD 6670 and open source driver
Hey folks,
I use the xf86-video-ati driver and have a lot of artifacts on my screen.
Here my Xorg and dmesg log:
Dmesg: http://pastebin.com/AF8AmJfP
Xorg: http://pastebin.com/8rnQS0sa
My kernel version: 3.8.8-2-ARCH
My /etc/X11/xorg.conf.d/20-radeon.conf:
Section "Device"
Identifier "Radeon"
Driver "radeon"
Option "EXAPixmaps" "off"
Option "AccelDFS" "off"
EndSection
I tried to use the linux-lts kernel and the mesa-git repository but nothing happend...
KMS is enabled, if I disable it Xorg only works with vesa but very slow and with a bad resolution.
All other framebuffers devices are disabled.
I hope someone can help me...
Last edited by Gorentill (2013-04-27 21:09:26)Yes I have...no changes...
I could use the ati catalyst driver to solve this problem but I hate this slow driver.
EDIT:
I also have artifacts on my virtual console...
Last edited by Gorentill (2013-04-27 12:51:19) -
KDE4 and open source development
Hi all.
I wanted to point some of you to http://bugs.kde.org to report obvious bugs you observe. If you see something is clearly wrong with KDE4, and if you are SURE it is a bug, then by all means please DO TELL THEM about your findings.
It obviously works for Arch's flyspray, too. Please folks. Don't just report on the forums here, but tell kde.org, too! The better you help them doing so, the better kde4 will be in the end.
Thanks for reading.http://java.sun.com/products/java-media/jmf/index.jsp
-
Nullriver netshare and open source tethering solution for iPhone
While Nullrivers netshare is banned and Apple and AT&T is delaying the tethering plan, how about an opensource tethering solution for iPhone?
I was thinking to create a google code project to do just that. But I heard that the possibility of tethering itself is bricked in 2.1.
Does anybody have more information on this?I have great interest in tethering. But seems like a black art. Anybody know this art?
-
FireGL V7700 and open source Radeon drivers
I have an infuriating problem with a new FireGL V7700 video card (RV670) and the radeon drivers. Namely: they don't work. When I boot with KMS on, once the KMS comes on the screen goes black, power saving on the monitor kicks in, and the system halts (doesn't start sshd, or get IP from router). So I've not no dmesg and no logs. (ಠ_ಠ)
With KMS off (via nomodeset) it boots, but the drivers don't work because of no UMS support. (ఠ_ఠ)
I've tried many things (custom kernels, different distros, etc) but it doesn't seem to make a difference. I'd like to make this card work with the xf86-ati-video drivers. I bought it because those drivers are supposedly getting pretty good.
The infuriating thing is that the card works great in windows (ಥ_ಥ)
Thanks for any help!I do this using systemd tmpfiles
make a new .conf file in /etc/tmpfiles and enter:
w /sys/class/drm/card0/device/power_profile 0644 root root - low
I use the address under /sys/devices/, but I think both should work
make sure the tmpfiles services are also enabled -
Simple RMI over HTTP in MIDP1.0 - open source project
Hi All,
For anyone interested in doing remote method calls (over HTTP) to a server from a MIDP 1.0 MIDlet there is an open source project now available for this. Please see MeRMI (Micro Edition RMI) at:
http://mermi.dev.java.net
You can use this to create a remote server class, much like you would in RMI. MeRMI then generates classes to do the remote communications for you. So you can just make nice, simple Java calls from your MIDlet, without having to worry about how the calls are passed to the server, etc. It's all pretty easy to use (especially if you have used RMI before) and takes a lot of the hard work out of building network applications.
The toolkit is completely free (LGPL) and open source, you can use the code and do what you want with it.
Hope it comes in useful to someone!
zonski.
Note: MeRMI does not support callbacks, but an event mechanism using blocking, polling requests can be used to create server to client messaging.It sounds interesting. It is only for MIDP 1.0?, what about MIDP 2.0?
-
Performance comparisons between POF & open source serialization mechanism?
I'm curious whether anyone has done any comparisons of performance and serialized object sizes between POF and open source mechanisms such as Google Protocol Buffers and Thrift, both of which seem to be becoming quite popular. Personally, I dislike having to write a separate schema and then generate classes from it, which Protocol Buffers and Thrift require you to do, and I vastly prefer POF's mechanism of keeping everything in the code (although I wish the POF annotation framework was officially supported). But aside from that, I'd prefer to use Coherence for many of the purposes that some of my co-workers are currently using other solutions for, and this would be useful information to have in making the case.
FWIW, I hope someone at Oracle is seriously considering open-sourcing POF. I don't think that anyone who would've bought a Coherence license would decide not to because they could get POF for free. They'd just go and use something else, like the aforementioned Protocol Buffers and Thrift. Not only are many companies adopting these as standards, but as has been mentioned in other threads on this forum, that's exactly what even some Coherence users are doing:
Re: POF compatibility across Coherence versions
I really wish I could to encourage developers that I work with to give POF a look as an alternative to those two (both of which we're currently using), regardless of whether or not they plan on using Coherence in the immediate future. As things stand right now, I can't use Coherence for code that needs to be shared with people in other groups who haven't adopted Coherence yet. But if I could use POF outside of Coherence, it would probably be acceptable to those folks as a generic serialization mechanism, and it would make migrating such code to Coherence at some point down the road that much easier. If, on the other hand, I have to write that code around, say, Protocol Buffers, then it becomes much harder to later justify creating and maintaining POF as a second serialization mechanism for the same set of objects, which means it's much harder to justify using Coherence for those objects.
In short, making POF usable outside of Coherence, and who knows, maybe even getting it supported in popular open source projects such as Cassandra (which, as I understand it, uses Thrift) would make it easier to adopt Coherence in environments where objects are already persisted in other systems.
That's my two cents.Hi,
Thank you for links. It is very interesting.
I have implemented POF serialization plugin for this benchmark http://wiki.github.com/eishay/jvm-serializers/
You can get code, run benchmark for yourself and compare result.
Handmade POF serialization http://gridkit.googlecode.com/svn/wiki/snippets/CoherencePofSerializer.java
Reflection POF serialization http://gridkit.googlecode.com/svn/wiki/snippets/CoherencePofReflection.java
Also you should put a two line in BenchmarkRunner.java, all other instructions are on jvm-serializers project page.
Protobuf.register(groups);
Thrift.register(groups);
ActiveMQProtobuf.register(groups);
Protostuff.register(groups);
Kryo.register(groups);
AvroSpecific.register(groups);
AvroGeneric.register(groups);
// register POF tests here
CoherencePofSerializer.register(groups);
CoherencePofReflection.register(groups);
CksBinary.register(groups);
Hessian.register(groups);
JavaBuiltIn.register(groups);
JavaManual.register(groups);
Scala.register(groups);A few comments on result.
* Micro benchmark is a micro benchmark, I saw quite differnt results then comparis java vs POF vs POF reflection on own domain objects.
* POF score very good compared to protocols like Protobuf or Thrift, especially on deserialization.
* Kryo project is quite interesting, I'm going to give it a try in next project for sure.
Again, thanks a lot for a link.
Maybe you are looking for
-
Dear all , The background job is already scheduled daily (PR NOT PROCESSED BY PURCHASING) , isn't possible to check the list of users is assigned in the spool list recipiant, I have checked spool list , but its shows only one id .... how to check the
-
AIAB Distribution Rule for Settlement Error, "Asset cannot settle to itself"
Hello Everyone, I have a customer who is getting the "asset cannot settle to itself" error when trying to set up a distribution rule to settle the remaining items of a Line Item Managed AUC to multiple Assets. The Asset numbers and AUC number do NOT
-
Firefox freezes up for 2 full minutes, every time I open it.
After I open Firefox, I have about two or three minutes to browse around before it freezes up. I get the "not responding" message. This lasts for a full two minutes, at least. There's always time to pop open IE or Chrome and get the information I nee
-
Hi, Last time when I installed OIM, everything worked fine, but I was unable to open the workflow manager applet. I think maybe I used the wrong JRE/JDK. Please read below the environment I am using and suggest which Jave version should be used. OS:
-
IPhoto 8.1.2 won't launch (crashes) after restore
My computer crashes so I took it into the mac store to get fixed. The problem was still there after they did a reinstall, then updated from my backup. So they reinstalled OS X 10.6.8, and only my contents from the backup. Everything seems to work oka