Harddisk error on 6590 with winXP

Anyone seen this error before? It started appearing after I got this board.
I'm running an Athlon XP 2400+
GF4 4600
2x Seagate 40GB
40x burner
52x cd-rom
512 PC2700 DDR
SBLive Value
Intel 10/100 NIC
BIOS 1.2
Error in event log is:
The device, \Device\Harddisk2\D, is not ready for access yet.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
of course if you click on the link it gives you it says "sorry, we don't know whats wrong with it"
It's a pain because when I have to transfer a lot of large files from one drive to the other, the systme will sometimes reboot itself.
Help??

It's a 300 watt Antec power supply. I wouldn't think that is the issue since the same case housed a massive dual Xeon system with cards galore and 6 harddrives.
Also, I error said harddisk 2\D, so I disconnected me 2nd drive containing the d partition. The error switched to harddisk1. I also replaced the drive to check for a drive problem and it gets the same errors. I'm was starting to think I had a bad IDE port until i started seeing all the posts here about the 6590.

Similar Messages

Net use * \\computername gives a 52 error (duplicate name) with WINXP but not with WIN7

Hi,
I use the command " use * \\computername\share " to test the mapping of shared drives.
The target machine is a Win7 machine (and is in another subnet).
The lmhost file of the client machines contains the line
" IP address - computername #PRE "
to allow for name resolution.
I get a correct reply with "ping computername", which shows that name resolution at the level of the clients is all right.
However, when I try the "use * \\computername\share" command, it works fine if the client is a Win7 machine but gives me a "error 52 duplicate name" if the client is an XP machine.
Now, "computername" is NOT the NETBIOS name of the target computer but another name I use for sake of facility (the NETBIOS name of the target machine is a complex one and makes it identification by the end-user difficult when it appears in the
drop list of the GUI command "map network drive" (which is what the end-user will use for mapping).
Is it possible that the client WinXP tries checking "computername" against the real NETBIOS name of the target machine and says that there is duplication because they do not match, whereas the client Win7 does not do that or accepts that "computername"
is not the real NETBIOS name ?

Dear Carey,
Thank you for your reply. However, what the link describes is a situation opposite to what I described.
The link is about TWO computers with the same NETBIOS name on a s single local network. Then the conflict is obvious since that NETBIOS name will have to point to two IP addresses.
What I described was trying to map a shared disk on a a SINGLE computer with NETBIOS name "A" and a given unique public IP address (vvv.xxx.yyy.zzz), but to which I referred to in the lmhost file of the calling
computer (located in another local network) with another NETBIOS name ("B") .
Thus, the target computer is a names "A" in its local network but the lmhost file in the calling computer has a line "vvv.xxx.yyy.zzz
B #PRE". This when I got the "Duplicate name error".
I do not understand the error because the lmhost file should simply allow the calling computer to make name resolution (and say "B" is IP address vvv.xxx.yyy.zzz) to make the connection (which is what we get if we use the command "net use
* \\vvv.xxx.yyy.zzz\share" [this command always work]). But what I was suspecting is that the calling computer gets confused when it sees that the target computer with address vvv.xxx.yyy.zzz has a NETBIOS name different ("A")
from the one it was supposed to call ("B").
Am I correct ?
As I explained in my original post, I uses "B" to name the target computer on the calling computer because "A" is a quite fancy and difficult name that the end user will never understand or remember.
If I name the target computer "A" in the lmhost file (i.e. its real NETBIOS name), I do not have any problem.

Is Adobe Flash compatible with WinXP using `Dual Core CPUs ??

Is Adobe Flash compatible with WinXP using Dual Core CPUs ??
I have this in my current system
WinXP 32bit SP3
Asus M2N68-AM Plus motherboard
AMD X2 7850 Black Edition Dual Core CPU
2GB DDR2
WD Caviar SE16 500GB SATA drive
Onboard VGA **only**
I keep having consistent problems using this new motherboard with a Dual Core CPU
My new motherboard keeps crashing randomly while watching video online.
I can watch a video for about 2 min or even 20min and then the PC randomly crashes
I get this weird mosaic pattern on the screen whenever it crashes and then I have to press Reset to Reboot
And it **only** crashes after streaming a video on any of the websites, YouTube, CBS.com, NBC.com, Hulu.com etc, etc
My last PC never crashed while watching a video online - it was just slow since Adobe player is a hog -- and it was still a 1.8GHZ CPU !!
My last PC is still using version 10.1 for the Adobe Flash player -- and it ***never*** crashes
The most I ever see happen on that one is that the player might occasionly crash in the video window and the error message says to reload the Flash player.
Then I tried this remedy of disabling the Hardware Acceleration in the Adobe Settings -- but no luck still.
I even downgraded to 10.1, then 10.0 and it still keeps getting these random crashes while watching video
I'm wondering if WinXP 32bit is really compatible with Adobe Flash when using a Dual Core CPU
Before I plunk down $100 for Win7, I'm thinking about trying Ubuntu and see what luck I have.
I haven't seem anything to the contrary yet.
thanks,
Message was edited by: Ragoooman

What browser & version do you use?
How exactly does that "crash" manifest itself? What exact error message are you getting?
Have you tried to update the device drivers for your graphics/video/display adapter?

HardDisk Error Nomad Jukebox Zen

Hi, I have a problem obviously, my Nomad Zen NX with 30 gb hard dri've, is now starting to say "HardDisk Error" and this thing was expensi've! and of course my warranty is up, so I was hoping someone could tell me how to fix this problem? or what tech shop could fix it's, or how much a replacement hard dri've would cost or where I could get that harddri've?.... I'd appreciate all and any replies. Thanks :-D

FreezeHero: Just to add to Badboy's advice (Badboy: Just to note that hard disk replacement isn't covered in the FAQ post), you can try the advice here in the Zen FAQ at Nomadness.net at your OWN RISK. If you don't want to try this or are under warranty then contact Creative Support.
If you aren't under warranty you can contact Creative Support to see if they will repair it. If you want to try repairing it yourself, taking the risk the hard disk is at fault, then you can follow Rudi Cheow's excellent guide. There's also a thread here at the Zen Nomadness.net forum on compatible dri'ves, and the last page of Rudi's guide also has information on this.

Please help with WinXP

I installed Java 1.4.1 Plug-in on a couple of Win98 computers, and everything works OK.
An applet launches a program by executing Runtime.getRuntime().exec(start C:\\AcroRd C:\\Mydocu~1\\myfile.pdf);
AcroRd is shortcut to Acrobat Reader.
On a computer with WinXP, I get the following error: java.io.IOException: The system cannot find the path specified.
myfile.pdf is written prior to launching Acrobat; however, I don't see it in My Documents on the XP machine.
Security policy is the same as on the Win98 machines.
What is most aggravating is that it worked with java 1.3.1.
Please help.
Thank you all.

Try replacing Mydocu~1 with the long version of the directory name
(might need quoting if it contains spaces - don't think so, tho)

IPod and iTunes not compatible with WinXP

It appears that the iPod (I have a 4GB nano) and iTunes (I tried what was on the CD, as well as the latest download of 6) are not compatible with Windows XP Media Center Edition (patched to the hilt, all the latest updates installed).
Installation works fine but iPod updater does not terminate cleanly and the iPod nano does not get rebooted properly, and although iTunes sees the iPod when it is plugged in, it does not recognize it from plug-in to plug-in (it's supposed to remember the name of the iPod device, and not re-prompt you to register, etc.).
Also, when attempting to copy MP3 files to the iPod, it appears as though they are copying but they do not wind up on the iPod no matter how hard you try.
Windows 2000 SP4, however, does not have any problems with the iTunes or iPod updater software and everything seems to work just fine.
It would behoove Apple to investigate the compatibility problem that their software has with Windows XP Media Center Edition, and fix it as soon as possible.

When i startup itunes it says:
"The software required for communicating with the ipod is not installed correctly. Please reinstall itunes to install the Ipod's software"
I am on xp media center edition 2005
When I run the ipod updater it gives me "ipod service error"
What can i do?
I bought the 4gb nano just yesterday.
both my ipod and itunes software are the Updated September 23, 2005 versions
ps on my old pc with winxp sp2 barebones edition, it works fine...
maybe its cos in mce 2k5 i got 2 users?

Zen Vision:M 30GB has "Harddisk Error&qu

As you would expect to happen I am just out of my year warranty and the other day I go to turn on my player and after a minute or so instead of starting up it goes into recovery mode. Never seen this before so not a good feeling. Restart it and the same thing. Use the reset button and still the same thing. Then I decide to try the options it gives me, clean up, format, etc. Clean up does nothing and the format and other option both say "harddisk error" when I select them.
I've tried searching for this problem all over but haven't come up with to much, at lest anything that would attempt to solve the problem. Probably not something that can be fixed as it seems the hard dri've has crapped out which is a shame as in the year I have had this I probably use it 3-4 hours a month max and always take care of it.
So do I have an expensi've paperweight now? I e-mailed support twice and not surprisingly have yet to hear anything back.
So I turn to you.
Is it time to take a hammer to it and vent or is there any hope?

still a $200 paperweight.
TOSHIBA MK3006GAL is the HD that is in it, can it be replaced with a TOSHIBA MK2004GAL? The 30Gig goes for about a $00 (might as well get different player for that price) but the 20Gig can be had for about $45-$50. Anyone ever swapped these out?Message Edited by poocano78 on 06-27-200707:53 AM

Remote not working with WinXP 64

I have a X-FI Platinum card with the front module and remote. Under WinXP Pro everything worked fine. I have since upgraded to WinXP 64 bit Pro and the remote does not work.
I have installed the latest driver for WinXP 64 (At least last weeks driver) which went OK. Soundcard seems to work OK. I have a 5. speaker setup and I get sound from all speakers. Before there was the createi've audio console that was in the system tray, but that doesn't seem to be there with WinXP 64.
Is there another download that I need to do for the Remote to function ? Also I no longer have any sound test options in the audio console is there another download for that as well ??System Specs:ASUS P5N32 SLI Deluxe MOBOIntel P4 660 processor2 GB RAMBFG 7800 GT video cardX-FI Platinum sound cardWinXP Pro 64 bit?Thanks,?wstreaker

I am not sure whether the remote software gets installed with the 64 bit drivers or not. I know some people have turned to alternate software to control the remote on WinXP 64 bit edition successfully. I am sure you can find out what I mean by searching these forums, I am not allowed to say any more than that. Hope that helps?

Load data error: Database selection with invalid cursor (sm21)

hi experts,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue, The Oracle checkpoint not complete.
thanks,
xwu.

Processchar occur error: Database selection with invalid cursor (sm21)

hi,
when I execute processchar, it occur some system error:
"Database selection with invalid cursor ",
"Documentation for system log message BY 7 :
The database interface was called by a cursor (in a FETCH or CLOSE
cursor operation) that is not flagged as opened. This can occur if a
COMMIT or ROLLBACK was executed within a SELECT loop (which closes all
opened cursors), followed by another attempt to access the cursor (for
example, the next time the loop is executed). "
the error msg occur when apply bw support package19.
data from DSO to CUBE, Transferred Recodes is not zero, but Added Recodes is zero.
Request status always yellow, process is running.
current sys info: BI7 and BW19, BASIS17,PI_BASIS17, the database is oracle10g R2.
thanks for your help.

I have solved this issue , The Oracle checkpoint is not complete.
thanks,
xwu.

When I try to sign in to my account on iTunes, I get the above error message, along with "Please review your account information". When I then click on "Review"

When I try to sign in to my account on iTunes, I get the above error message, along with"Please review your account information".
When I then click on "Review", it comesup with the page "Create an Apple Account for the iTunes Store"and presents me with the Terms Of Service.
When I click "Agree", It is disabled.
Can anyone tell me why this has happened and how to resolve it?
Please, please, please help.

Count me in as having the same problem. I have been leaving messages in the iTunes for Mac forum where others in there also are having problems. I have been unable to access my account since 11/7/2007. E-mails with Apple have not worked and now I haven't heard back from them since Saturday. I have tried both on a Mac and Windows machine and keep receiving the same error message that:
This Apple ID has not yet been used with iTunes.
I last purchased music with this account on 10/30/2007. I even tried resetting my password, changing my account info, trying on a computer with iTunes 7.4, etc. I have money in that account and 150 songs and 5-6 tv shows that I cannot access. I also just purchased a new computer and cannot sync my iPod with this computer since these songs will not transfer.
Apple really needs a phone number for technical support. Having to deal with e-mails back and forth (and waiting a day for each e-mail) is not a good business practice. Hopefully they will have a phone number in the future.
Either way, count me in on getting annoyed that a week later, this issue has not been fixed.

Error in access with Essbase Studio Console

We get error to connect with Essbase Studio Console.
"children for Root. Reason: Unknown package name 'drillthrough'.Line = 1."
It is a new installation.
EPM 11.1.2.2

Hi,
During the installation of Essbase Studio only, ess_es_server.jar and ess_japi.jar are missing. If you install both Essbase and Studio, they are not missing.
This is due to unpublished bug 14232814 - DURING THE INSTALLATION ONLY STUDIO SOME .JAR FILES NOT INSTALLED
Try the following:
Stop Essbase Studio
copy files into EPMSystem11R1\common\EssbaseJavaAPI\11.1.2.0\lib
ess_es_server.jar
ess_japi.jar
If folder does not exist create it.
1. Stop essbase Studio.
2. Drop tables from relational database
3. Recreate tables.
4. Start Essbase Studio.
Scripts for dropping & recreating catalog located under
oracle\middleware\EPMSystem11R1\products\Essbase\EssbaseStudio\Server\database\common\db_name
Hope it helps....
KosuruS
PS: If the above information is helpful, mark it :)

Error in WebDynpro with WebServices

Hi all,
Im getting some errors using applications deployed in WEB AS SP9 that runs as a WebDynpro IView in EP.
Running the application as standalone (out of EP) this works fine.
NetWeaver Developer Studio 2.0.9
WebDynpro application using WebServices that access Oracle 8i database in the follow sequence:
WebServices -> Session Bean stateless -> Entity Bean CMP (manage connections; generate sql code, etc.)
In WebDynpro application we import WebService Model by the follow sequence:
New Model - Import Web Service Model - Local Server for WSDL Source - <WebService deployed>
In each WebServices we have created these methods:
findByID(ID);
getAll();
insert(parameters);
remove(ID);
update(parameters);
We guess that the error is generated in Entity Bean because all WebServices generate these errors.
Error 1 - Application with WebServices Model
Error stacktrace:
com.sap.tc.webdynpro.repository.RepositoryRuntimeException: Repository Object br.com.xxx.fluxo.Fluxo/ComponentInterface:FluxoInterface/InterfaceViews:CadastroSituacaoFluxoInterfaceView/InboundPlugs:Default associated via relation RepositoryObjectRelation(br.com.xxx.fluxo.application.CadastroSituacaoFluxoApp, StartupPlug) does not exist.
 at com.sap.tc.webdynpro.repository.RelationToOne.resolveTargets(RelationToOne.java:124)
 at com.sap.tc.webdynpro.repository.RelationToOne.mergeTargets(RelationToOne.java:108)
 at com.sap.tc.webdynpro.repository.RelationToOne.mergeTargets(RelationToOne.java:72)
 at com.sap.tc.webdynpro.repository.RelationToOne.getTarget(RelationToOne.java:174)
 at com.sap.tc.webdynpro.repository.RepositoryObject.getRelatedModelObject(RepositoryObject.java:349)
 at com.sap.tc.webdynpro.progmodel.repository.IWDApplicationInfo$Implementation.getStartupPlugInternal(IWDApplicationInfo.java:319)
 at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:355)
 at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:593)
 at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
 at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:249)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
-- end --
Error 2 - Application with WebServices Model
An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4009.00.0000.20041011171310.0000 (release=630_VAL_REL, buildtime=2004-10-19:21:48:59[UTC], changelist=290362, host=PWDFM026)
Web Dynpro code generators of DC local/Apontamentos:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:31:53[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:36:19[UTC], changelist=280539, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:26:00[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20041011171310.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:54:34[UTC], changelist=290362, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20041011171310.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:54:34[UTC], changelist=290362, host=PWDFM026)
SapGenerationFrameworkCore: 6.4009.00.0000.20040910102127.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:25:03[UTC], changelist=280527, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:41:01[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:29:01[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:26:11[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:41:33[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
6.40 patchlevel 87037.313
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_06-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows 2000, version: 5.0, architecture: x86
Error stacktrace:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Did not find repository information for controller NotProductiveEventController
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.createCustomController(DelegatingComponent.java:55)
 at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:428)
 at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:371)
 at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:400)
 at com.sap.tc.webdynpro.progmodel.context.MappingInfo.init(MappingInfo.java:138)
 at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:746)
 at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:761)
 at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
 at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
 at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
 at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
 at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:41)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.displayToplevelComponent(ClientComponent.java:134)
 at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:374)
 at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:593)
 at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
 at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:249)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Error 3 - Application with RFC Model
An error has occurred:
"Failed to process the request."
Please contact your system administrator.
Hide details
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4009.00.0000.20041011171310.0000 (release=630_VAL_REL, buildtime=2004-10-19:21:48:59[UTC], changelist=290362, host=PWDFM026)
Web Dynpro code generators of DC local/Apontamentos:
SapDictionaryGenerationCore: 6.4009.00.0000.20040910101802.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:31:53[UTC], changelist=280522, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4009.00.0000.20040910102423.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:36:19[UTC], changelist=280539, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:26:00[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4009.00.0000.20041011171310.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:54:34[UTC], changelist=290362, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4009.00.0000.20041011171310.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:54:34[UTC], changelist=290362, host=PWDFM026)
SapGenerationFrameworkCore: 6.4009.00.0000.20040910102127.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:25:03[UTC], changelist=280527, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:41:01[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4009.00.0000.20040609163924.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:29:01[UTC], changelist=253570, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4009.00.0000.20040730142052.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:26:11[UTC], changelist=269100, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4009.00.0000.20040910102318.0000 (release=630_VAL_REL, buildtime=2004-10-18:21:41:33[UTC], changelist=280536, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
6.40 patchlevel 87037.313
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_06-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows 2000, version: 5.0, architecture: x86
Error stacktrace:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Did not find repository information for controller ZMANPP012Controller
 at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.createCustomController(DelegatingComponent.java:55)
 at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:428)
 at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:371)
 at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:400)
 at com.sap.tc.webdynpro.progmodel.context.MappingInfo.init(MappingInfo.java:138)
 at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:746)
 at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:761)
 at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
 at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
 at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
 at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
 at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:41)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.displayToplevelComponent(ClientComponent.java:134)
 at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:374)
 at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:593)
 at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
 at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:249)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)

Hi,
I feel this error is nothing to do with webservice model.
Please check your application properties like startupPlug,Interface View etc. Set the properties correctly and deploy once again.
Regards, VIP

Error in Communicating with DCA Server

Hi,
I have Cisco LMS 2.6 and next modules:
1. CiscoWorks Common Services 3.0.6
2. Campus Manager 4.0.13
3. CiscoView 6.1.5
4. Device Fault Manager 2.0.13
5. Internetwork Performance Monitor 2.6.0
6. Integration Utility 1.6.0
7. Resource Manager Essentials 4.0.6
Windows Server 2003 SE SP2
I have some problems:
1)
When I try enter to Device and Credentials I get message "Error in communicating with DCA Server.
DCA Server may be down. Please start the DCA Server and then refresh the page."
I try to restart CiscoWorks Daemon Manager over Services.
I cannot get information a lot of time from command "pdshow". Only black screen on the window CMD.
Or I get error
C:\Documents and Settings\zykov>pdshow
ERROR: GetReply failed:
ERROR: Daemon Manager startup in progress. Please wait.
dcr.log
[ Чт фев 18 16:51:28 YEKT 2010 ] [Ajp13Processor[9009][4]] FATAL com.cisco.nm.dcr.DCRProxy - Error in Communication to DCRServer , Reason :DCRException ID - -202 : CSTM Error Code [-1] CSTM Comm Type [0] - Unknown exception before invocation
[ Чт фев 18 20:32:35 YEKT 2010 ] [Ajp13Processor[9009][3]] FATAL com.cisco.nm.dcr.DCRDatabaseAccess - Severe error in DCRDatabaseAccess initialization - JZ00L: Login failed. Examine the SQLWarnings chained to this exception for the reason(s). 0 JZ00L
[ Чт фев 18 20:32:35 YEKT 2010 ] [Ajp13Processor[9009][3]] FATAL com.cisco.nm.dcr.DCRSystem - Unable to Instantiate DCRDataManagement ObjectJZ00L: Login failed. Examine the SQLWarnings chained to this exception for the reason(s).
java.sql.SQLException: JZ00L: Login failed. Examine the SQLWarnings chained to this exception for the reason(s).
DCRServer.log
[ Thu Feb 18 21:10:41 YEKT 2010 ] Starting DCR Server...
[ Thu Feb 18 21:10:43 YEKT 2010 ] No restore has happened
dcrclient.log
[ Чт фев 18 20:50:49 YEKT 2010 ] [Ajp13Processor[9009][5]] FATAL com.cisco.nm.dcr.DCRProxy - Error in Communication to DCRServer , Reason :DCRException ID - -202 : CSTM Error Code [-1] CSTM Comm Type [0] - Unknown exception before invocation
2) When I run Alerts and Activites I get error "An exception occurred. Please check the AAD.log file for further details."
AAD.log
18-фев-2010|21:30:10.291|ERROR|AAD|Ajp13Processor[9009][3]|AFDLaunchAction|perform|.|Error in calling getPartitionNamePMServercom.cisco.nm.xms.ctm.common.CTMException: Read timed out/Error in received response Connection reset
3) On the window Home of Common Services I have message "JRM server is down or inaccessible for this user"
I try reinstall last modules Campus Manager 4.0.13,
Device Fault Manager 2.0.13,
CiscoWorks Common Services 3.0.6.
But it cannot help me.
I think that this problems related. Yesterday all works correctly.
Thank you for your help.

You are right the problem was related with antivirus.
After removal antivirus DCA Server started successfully.
Remains the question as to be without an antivirus program?
Also remains a problem in the window Alerts and Activites.
When I click on the Device Name field (for some devices) does not open Detailed Device View.
The window closes immediately after opening.

Error in communicating with DCR

Preliminary question:
     For LMS 3.2 on Windows, which is better 2003 or 2008?
Primary issue:
     Background: new install of LMS 3.2 on Windows 2008 sp2 Virtual Machine.
          Upgraded Campus to 5.2.1
          Upgraded RME to 4.3.1
          when updating device packages, services started extremely slow with anidbeng taking 2hrs. portal showed service unavailable.
          had to restart crmdmgtd to be able to login.
          most links in CS return the following:   Error in communicating with DCR server. DCR server may be down. Please start the DCR server           and then refresh the page.   The DCR server shows running normal.
          tried restarting crmdmgtd
          attached DCR.log
         tried CSCtd07131 .. no success

Windows 2008 offers more scalability so I would go with that although LMS has been tested on both (you will have a longer life of support as well).
When applying the CSCtd07131 patch, you need to be sure it is the right patch for the right CS version as there are multiple versions out there. However, this is fixed in LMS 3.2.1 so you should just upgrade there.
An often overlooked matter when installing LMS are the steps mentioned here:
https://supportforums.cisco.com/docs/DOC-9132
I see constant TAC cases due to installation problems because the above steps are not met or are half-met. Services starting slowly are usually an after-effect of something blocking ports (anti-virus or such) or possible database corruption. Setting DEP and anti-virus as specified above might help here, but if you did not follow these steps to the letter during this new install, I would suggest to cleanup this server and re-install properly; then move all the way to LMS 3.2.1.

Harddisk error on 6590 with winXP

Similar Messages

Maybe you are looking for