Harddrive won't appear after upgrading to 10.4

I have an old Sawtooth G4 and recently upgraded to Tiger. The computer has three internal hdds, a 30, 60, and a 120 gb. However in tiger the 120 gb did not appear - in the finder or in disk utility. I did software update to make sure I was using the latest version of 10.4. I booted from 10.3.9 and the disk was there. I backed up my data on to one of my dad's LaCie drives, and erased the disk, and reformatted for Mac OS X Extended (Journaled). When I booted in Tiger again, it still wouldn't show up in the disk utility or the finder. I even tried unplugging and plugging in the HDD from its IDE card. Can someone help me?

Maybe your drive is connected to a PCI card that isn't supported or needs firmware or driver for 10.4.
A RAID created in 10.3.x will show in Tiger, but if you create a RAID in Tiger, it will not show or mount in Panther - there are a number of changes between the two.
MacIntouch and MacFixit (and others) created some lists and reports of what works, broke, updates needed, etc a year ago to help people migrate and upgrade to Tiger successfully. Might want to check those sites.

Similar Messages

  • Iphoto 8.1.2 won't open after upgrade to 10.8.2?

    iphoto 8.1.2 won't open after upgrade to 10.8.2.  I have tried to upgrade iphoto to 9.1 but it won't work.

    To upgrade to iPhoto '11 (version 9.x.x) you musdt purchase the upgrade in the App store - that is not a free update.
    what happens? What error messages do you get? if it crashes post the first 50 lines of the crash report
    LN

  • The Facebook video chat icon is not appear after upgrading to mavericks X

    The Facebook video chat icon is not appear after upgrading to mavericks X. Please help.

    http://support.apple.com/kb/ht5404
    Scroll down to the bottom, read and then perform the troubleshooting steps provided.

  • IPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?

    Had to upgrade according to screen.  iPhoto won't start after upgrade 1.1 for my new iMac. Now what do I do?
    I have restarted the computer. Brand new iMac intel. v 10.9.4

    You need to upgrade iPhoto for Mavericks. Download the upgrade using App Store.

  • Itunes won't work after upgrading to Mac os x 10.7

    How can i fix itunes, it won't open after upgrading to Mac OX lion??

    Downloaded and reinstalled. Still crashed instantly after trying to open or create a document. Below, from Crash Report:
    Exception Type: EXCBADACCESS (SIGBUS)
    Exception Codes: KERNPROTECTIONFAILURE at 0x0000000000000044
    Crashed Thread: 7
    Thread 7 crashed with X86 Thread State (32-bit):
    eax: 0xb0427d48 ebx: 0xb0427c38 ecx: 0xb0427b38 edx: 0xb0427b3c
    edi: 0x00000009 esi: 0x00000000 ebp: 0xb0427b18 esp: 0xb0427ae0
    ss: 0x0000001f efl: 0x00010283 eip: 0x94bc9f4b cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
    cr2: 0x00000044
    Will attempt your suggestion.

  • Old emails won't load after upgrade to Mountain Lion

    old emails won't load after upgrade to Mountain Lion

    See if anything in here will fix it:
    1. Hold down the Command and Option keys as you click the iPhoto icon.
    The Photo Library First Aid window opens:

  • Start won't appear after clicking start button or win key on keyboard

    It's happened after update to 9926. First start menu works properly but after reboot it broken-down. Right click works fine. Before reboot i disabled "Windows search" service but i don't think it related.

    Start won't appear after clicking the start button or win key on keyboard on the second user account. It works fine on the administrator account. UAC changes have no effect. Re-booting has no effect. Build is 9926

  • ICloud email won't work after upgrade

    iCloud email won't work after upgrade to Mountain Lion.  Says pop 3 server is timing out. Solutions?

    I'm sorry, as I keep saying... in MAIL I get the message that it cannot cannot to server!? Did you read the initial problem at all! I know exactly where mail is, although, the diagram was wonderful.
    My problem is TWO FOLD.
    The MAIL app doesn't work with iCloud but does work with my POP3 email for my office.
    Second problem is the iCloud on Safari doesn't work as I get the error message as the screenshot above.
    There is NO reason why the @me.com email shouldn't work through the iCloud site, as you can see, there is a also a Mail icon.

  • IPhone won't sync after upgrading to Leopard

    My iPhone won't sync, or even show up in iTunes, after upgrading to Leopard. I've tried restarting my Macbook Pro, trying different USB slots, closing and reopening iTunes, everything. Has anyone else had this problem??
    I've tried everything apple suggests:
    1. The iPhone battery might need to be recharged. For information about charging iPhone, see "Charging the Battery" in the iPhone User's Guide.
    2. If that doesn't work, disconnect other USB devices from your computer and connect iPhone to a different USB 2.0 port on your computer (not on your keyboard).
    3. If that doesn't work, turn iPhone off and turn it on again. Press and hold the Sleep/Wake button on top of iPhone for a few seconds until a red slider appears, and then slide the slider. Then press and hold the Sleep/Wake button until the Apple logo appears.
    Note: If you enter the PIN incorrectly three times, you may need to contact your carrier for a Personal Unlocking Key (PUK) to enable your SIM card again.
    4. If that doesn't work, restart your computer and reconnect iPhone to your computer.
    5. If that doesn't work, download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes.

    You might need to remove and reinstall the Apple Mobile Device Service. Follow the link below for info on how to do this.
    http://docs.info.apple.com/article.html?artnum=306637

  • IPhoto Library won't open after upgrade to mountain lion

    One of my iPhoto libraries (stored on a WD Pasport Studio) won't open properly after upgrade to Mountain Lion 4oo5 open ok. One opens but disc symbol keeps spinning and Iphoto stops responding. Any ideas?

    See if anything in here will fix it:
    1. Hold down the Command and Option keys as you click the iPhoto icon.
    The Photo Library First Aid window opens:

  • G4 AGP Graphics - 2nd display won't work after upgrading from os 10.2

    I have a desktop G4 AGP Graphics with two displays. When I was running os 9-10.2, the second display worked fine, but after upgrading the os (now running 10.4), the second display still works, but has turned gray and pixelated.
    When I take a screen shot, the picture shows that both displays appear clear (and in color).
    Am I missing something? Thanks in advance for any suggestions

    so do you have 2 different video cards driving two different monitors? or is it One video card with 2 displays?
    the info you listed isnt very detailed but it does tell me you got an ATI video card with 16MB VRAM.
    I assume that thats the Stock AGP 2x graphics card that came the The PowerMac G4 AGP graphics model.
    why is your display set to 8bit depth? a stock 2x AGP card with 16MB VRAM should be able to support 16bit or 24bit depth even at 1024 x 768 res.
    the info says also Core image not support as well as Quartz Extreme no supported. Which is significant because it could be why the 2nd Monitor doesnt display properly with Tiger.
    under 10.2 there were less stringent requirements for driving video.
    OSX 10.4 Tiger is much more advanced OS and has higher graphics cards requirements now.
    I could be wrong, but I think you may need a newer video card that supports Quartz Extreme and Core image.
    hopefully someone else will run by this topic and offer some insight aside from my own.

  • Powerbuilder won't activate after upgrade

    We currently have PowerBuilder 12.5 installed on a Windows XP machine.  This was licensed and activated properly.   So we tried to install 12.5.2 on a new Windows 7 machine.  After upgrade, when I ran Powerbuilder, it came up as unlicensed (or as evaluation version).  I went to the SAP site and regenerated a new license key for my machine and applied it, but it just won't activate.  There are three options for us to choose:
    New System    
    Display System
    Edit System
    We first tried the 'New System' option since it is an upgrade to 12.5.2 on a new machine (which we intend to move to).  However, the option for us to choose from the 'Product version' or 'System Type' simply won't show any drop down option for us to choose, nor does it allow us to enter.  Hence, we tried the 'Display System' and downloaded the license to update license.  It just won't activate.
    Has anybody ran into this issue and how was it solved?

    Hi All,
    I finally got a response from Nina who gave me the instruction on how to upgrade.  I followed the instruction to 'Edit System' instead of 'New System', and not use IE.  The reason I could not see drop down was due to IE 11 (have to use IE9 or before).  Now my PowerBuilder 12.5.2 was upgraded successfully.
    Thanks all, especially Nina.
    Regards

  • Video playback control won't show after upgrade to 3.1

    Hi,
    I have a iPod Touch 2nd Generation. After upgrading from 2.2 to 3.1, when I tap the video during video playback, the playback control won't show. I have to tap it many many times in order for the playback control to show. Does anyone have the same problem? Does anyone know how to fix it? It is upsetting to pay for an upgrade that would break existing behavior.
    Thanks.

    I have the same problem and the reset didn't fix it. In fact I went in to the store and the Apple Genius saw the issue and replaced my ipod with a rebuilt ipod that had ipod 2.x software. I upgraded it to 3.2 and once again the playback controls don't show up. Called support and they think it's a bug ... hoping for a fix.
    Any ideas?

  • Firefox 13 or 14 won't print after upgrade

    After upgrading from FF 13, I am no longer able to print from any website--the system print dialog box fails to open. This bug is also present in FF14 Beta as well.
    I have already attempted to reset printer.printer (all of them) from about: config with no success. If I roll back to FF12, the bug is still occurring. The only solution that I have found is restoring a previous restore point.
    Selecting print within print preview or control+p does not work as well.
    I have also started FF in safe mode with no plugins/add on's with the same result.
    Does anyone have any other suggestions?

    Hi jscher2000 -- You're are correct, there is no error message, and no print dialog. I already tried changing the default printer on the system level and the same bug is occurring.
    cor-el -- I have reset FF and created a new profile, sadly, nothing has changed.
    I'm am thinking there may be a .dll change with the new update that is affecting the print dialog; but that is just one possible theory.
    While researching this on Google, it appears that this has happened to others in the past with various version, however, there was no solution.
    More ideas would be appreciated. In the meantime, it looks like I'm going to restore a restore point and use a previous version until there is a fix or workaround.

  • HP p1006 won't print after upgrade to Mavericks

    After upgrading from 10.8 to 10.9 my computer won't print anymore.  It says "Pages not found!" 
    The printer is attached to a Mac server running 10.8 which is printing fine, but my computer (running 10.9) won't print unless I boot it from the 10.8 partition which still works.
    What I've already tried:  (on my computer & server)
    Reset the printing system
    updated drivers to HPPrinterDriver2.16.1
    Repaired permissions

    Hi zmogy,
    Welcome to the HP Forums, I hope you enjoy your experience!
    I understand you are unable to print on the 10.9.
    I will be happy to help you.
    The HPPrinterDriver2.16.1 is the latest HP printing and scanning software for OS X Mountain Lion, OS X Lion and Mac OS X v10.6 Snow Leopard.
    Plug the printer directly into the 10.9 computer and run the Apple Updates to install the Apple drivers.
    OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
    Test the printing.
    I can't guarantee it will print over the server.
    Hope this helps.
    Thank you for posting on the HP Forums.
    Have a nice day!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for