Hardware Development Kits for Windows 10 Technical Preview now available!

Install the latest tools to build, test, and deploy drivers; test and measure your hardware running Windows; and customize, assess, and deploy Windows 10 on your hardware.
 These tools are now available for Windows 10 Technical Preview:
Visual Studio 2015 CTP 6
Visual Studio Tools for Windows 10 Technical Preview
Windows SDK for Windows 10 Technical Preview
Windows Driver kit (WDK) 10 Technical Preview
Windows Hardware Lab Kit (HLK) Technical Preview
Windows Assessment and Deployment kit (ADK) Technical Preview
Become a
Windows Insider to get the latest Windows 10 technical preview and the latest hardware development kits and tools.
Get
the WDK samples from GitHub
Check out the
Windows Driver Framework source code. It’s now open source and available on GitHub!
Known issues
Be aware of these known issues (as of 3/23) in this release:
Windows SDK
After you install the Windows SDK, Windows 10 apps might not build successfully with
Visual Studio 2015 Community Technology Preview (CTP) 6 due to a of a metadata problem. Although you should not install the Windows SDK if you are doing app development, you can use the following workaround to build an app
successfully:
Exit Visual Studio.
Open a command prompt as administrator.
Run the \Program Files (x86)\Windows Kits\10\bin\x86\GenerateUnionWinMD.cmd script. 
Windows ADK
When installing to Windows 7 PCs, run ADKSetup.exe in administrator mode.
WDK
Currently, WDM templates do not build
Driver deployment to target PCs won’t work if the
Display name used in the Device Configuration dialog is different than the
Network host name. In this release, verify that these names are the same.
Target creation of mobile devices causes Visual Studio to become non-responsive.

Hello ,
May I know ,where is the HLK download link
Is it likely HLKSetup.exe ??thanks
Windows Hardware Lab Kit (HLK) Technical Preview

Similar Messages

  • Hardware Development Kits for Windows 10 Insider Preview are now available! (April 2015)

    Hardware Development Kits for Windows 10 Insider Preview are now available! (April 2015)
    Install the latest tools to build, test, and deploy drivers; test and measure your hardware running Windows; and customize, assess, and deploy Windows 10 on your hardware.
    Become a Windows Insider
    to get the latest Windows 10 Insider Preview.
    Then,
    get the tools:
    Visual Studio Community 2015 RC
    Windows SDK for Windows 10
    Windows Driver kit (WDK) 10
    Windows Hardware Lab Kit (HLK) RC for Windows 10
    Windows Assessment and Deployment kit (ADK) RC for Windows 10
    Known Issues
    We will update this thread with any known issues for this release.

    Hello ,
    May I know ,where is the HLK download link
    Is it likely HLKSetup.exe ??thanks
    Windows Hardware Lab Kit (HLK) Technical Preview

  • Filr 1.1 Technical Preview now available!

    The Filr 1.1 Technical Preview is now open. Simply navigate to this
    site in order to register and gain access.
    https://vibe.novell.com/vibe/filr-1-...w_registration
    Your world is on the move. http://www.novell.com/mobility/
    BrainShare 2014 is coming. http://www.novell.com/brainshare/

    ashmoore wrote:
    > Its teasing us - the files are listed but when you try to download you
    > get this message....
    >
    > We're sorry, we are unable to complete the download at this time.
    > You are not authorized to access this item.
    I tried a little while ago and it worked for me. Can you try it again?
    Your world is on the move. http://www.novell.com/mobility/
    BrainShare 2014 is coming. http://www.novell.com/brainshare/

  • IFS Development Kit for v1.1

    In the IFS download area, IFS 1.0.8 has a development kit listed, but v1.1 does not.
    Does anyone know when the development kit for 1.1 will be available?
    null

    The Devkit was rolled into the product with release 1.1

  • New release of the  Adobe Font Development Kit for OpenType

    A new release (v1.6.6148) of the Adobe Font Development Kit for OpenType has just been posted at:
    http://partners.adobe.com/asn/developer/type/otfdk/main.html
    This includes some minor changes in the feature file syntax, slightly better documentation for the MakeOTF tool, a complete installation procedure for Mac OSX 10.2.4, addition of the "Unicode and Glyph Names" documentation under the FDK license, and minor bug fixes.
    The most important change has to do with the handling of contextual substitution layout rules. MakeOTF now includes an option to create these either correctly, according to the OpenType specification v1.4, or in the older format used by InDesign v2.0 and earlier. This option is now tied to some additional logic, such that if you build a font to be compatible with InDesign v2.0 and earlier, some special text will appear in the name table named-id 5 "Version" . This text will serve as a marker that the font uses the InDesign v2.0 compatible format for these rules, and will consequently work with not only InDesign 2.0 and earlier, but also with any future programs that know to recognize the special text.. The special text was chosen in order to permit all known older OpenType fonts which have contextual substitution layout rules to keep working under future revisions of Adobe programs.
    This meant to be only a short-term solution. We do not anticipate that non-Adobe products will necessarily pick up this special case logic, and we do expect to revise the Adobe Type Library OpenType fonts to correct the rule format, once the next version of InDesign has been out for a few months
    The special case logic is documented in the FDK Release Notes, under build 5959. The special case is triggered when a font matches the following criteria:
    if (the name table name id (1,0,0,5) exists:
    if the name ID string matches the regular expression
    "OTF[^;]+;PS[^;]+;Core 1\.0\.[23][0-9].*":
    the font has In Design 2.0 format
    else if the e name ID string matches the regular expression
    "Core[^;]*;makeotf\.lib":
    the font has In Design 2.0 format
    else the font has the correct format.
    Example of string 1: "OTF 1.006;PS 1.004;Core 1.0.35"
    Example of string 2: "Core 1.0.38;makeotf.lib1.5.4898"
    Another example of string 2:"Core;makeotf.lib"
    Fonts built with FontLab by default have name id 5 strings in the format of example 1, although it is possible to change the value.

    I noticed two minor things with the windows version of MakeOTF.
    * If a fatal error occurs when using the GUI mode for compiling, the output zero sized binary otf is locked in the file system until you exit the application. This doesn't happen when using the command line interface since the application process always is terminated after each compilation.
    * When using the command line interface, or when executing MakeOTF from a script, the "parsing warnings" argument "+w" seems not to be piped to the compiler library after invoking MakeOTF. The "parsing warnings" argument works fine when calling a fpr project file from a script or when compiling in GUI mode.
    /mårten

  • Developer 2000 for Windows 98

    Does any know if Oracle is still offering Developer 2000 for Windows 98? If not how can purchase the Windows 95 version?

    Aysenur,
    that's teh difference between paid customer support and a free forum. The forum gives you a lot of help on technical issues as good as they can and Oracle product management helps on this. However, problems can be difficult to track and require dedicated help that cannot be handled on the forum. So coming back to the question what people should do that don't have a metalink account: get one!
    Frank

  • Adding features to Windows Technical Preview

    Why serial code not work with Windows Technical Preview evalution copy Build 9879?
    Add features to Windows Technical Preview and asks for serial key, two different serial key but not work.

    Hi,
    Where did you get the product key? Online purchase is not available at this moment (my region is set to US), and please note that the product key for "Add feature" is not the same key for activating system.
    If you have any feedbacks on Windows 10 Technical Preview, please click the search botton in the left bottom of the screen, type "Windows Feedback", then submit your feedback.
    Regards.
    Yolanda Zhu
    TechNet Community Support

  • Hardware development kit

    hi, I work in a group that develop prototype audio Synthesizers and from about one year I am studying the java language with a particular attention to the J2me technology.
    the point is that we work with discreet circuits(all analog) and we want to integrate it with a digital interface using java.
    what you think: is it possible?
    where I can find usefull documentation?
    what kind of equipment do I need?
    is there an hardware development kit to start it?
    I am quite new about java but I love it and also
    I don't want to renounce to analogue (discreet circuits & tubes) technology. can you help me?
    any kind of suggestion are wellcome!
    emiliano

    These might help...
    Java Comm API
    This version of the Java Communications API contains support for RS232 serial ports and IEEE 1284 parallel ports.
    http://java.sun.com/products/javacomm/
    Java Media
    This set of APIs supports the integration of audio and video clips, animated presentations, 2D fonts, graphics, and images, as well as speech input/output and 3D models.
    http://java.sun.com/products/java-media/index.html
    Java Media Framework
    The Java Media Framework API (JMF) enables audio, video and other time-based media to be added to Java applications and applets. This optional package, which can capture, playback, stream and transcode multiple media formats, extends the multimedia capabilities on the J2SE platform, and gives multimedia developers a powerful toolkit to develop scalable, cross-platform technology.
    http://java.sun.com/products/java-media/jmf/index.html

  • Hyper-V Not Enabling on Build 10041 of the Windows Technical Preview

          
    So I am running build 10041 of the Windows technical preview. I am not able to enable the Hyper-V Platform. Here are the steps:
    Go to Control Panel -> Program and Features -> Turn Windows features on or off - > Select Hyper-V Platform Checkbox.
    Windows will perform the install and request a restart.
    While restarting, I will get the updating windows message and at about 95 % it gives me a message to the tune of "Unable to update windows" and it roll backs the changes and restarts. No Hyper-V.
    Note that I can install the Hyper-V tools with out any issues just the Hyper-V Hypervisor and Hyper-V services will not install.
    Anyone have any ideas?

    So I am running build 10041 of the Windows technical preview. I am not able to enable the Hyper-V Platform. Here are the steps:
    Go to Control Panel -> Program and Features -> Turn Windows features on or off - > Select Hyper-V Platform Checkbox.
    Windows will perform the install and request a restart.
    While restarting, I will get the updating windows message and at about 95 % it gives me a message to the tune of "Unable to update windows" and it roll backs the changes and restarts. No Hyper-V.
    Note that I can install the Hyper-V tools with out any issues just the Hyper-V Hypervisor and Hyper-V services will not install.
    Anyone have any ideas?
    Can't provide an answer, but I have the same problem. I'd originally let my 9926 build, with Hyper-V installed and working, upgrade to the 10041 build. After installation things seemed OK, until I noticed I had no network connections working. They were all
    still there, but I had no network access and trying to view the properties of either my physical NIC or the Hyper-V switches just gave me an error.
    I tried uninstalling Hyper-V, but after doing that Windows wouldn't boot at all. It'd begin to start up, get almost to the login screen, but then die and reboot. I decided a rebuild would probably be best anyway, so I chose to do a Refresh when it offered
    me the advanced repair options.
    The Refresh mostly went well, the PC is running better now with a clean install, but I'm now stuck in the same situation where the Hyper-V server won't install. It installs, reboots, gets part way through configuring, then claims to fail and backs it all
    out again. No real diagnostic info presented as to why.

  • Couldn't install windows technical preview on a usb flash

    Hi, 
    couldn't install windows technical preview on a usb flash setup.
    please say me the solution to this problem

    Hi,
    Any errors poped out? You may try to switch to a USB 2.0 port and check this issue again.
    If you have DVD drive available, you may also choose to install Windows 10 through DVD, download the ISO file using this tool:
    Windows USB/DVD Download Tool
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Developer 6 for windows 98

    I installed oracle 8i (8.1.5.0.0) on windows 98 environment and it works fine. Now I would like to install Developer 6 or 6i for windows 98, a version compatible with oracle 8i 8.1.5.0.0 Do somebody know where could I find a demo version of this. Can I download this from internet like oracle 8i? I already tried to install developer 6 for windows NT (available on technet oracle site) but I have problems to connect to database when I am in developer (form builder for exemple) ORA-12203 TNS: Unable to connect to destination. It works fine with sqlplus included in oracle 8i, the connection is ok (sqlplus 8.1.5.0.0) but it doesn't work with sqlplus included in developer (sqlplus 8.0.5.0.0). I think it is because I have windows 98 and I tried to install developer for windows NT or oracle 8i is not compatible with developer 6 for NT. Please help me.

    I have the same problem, I have been killing myself to configure tnsnames.ora in different ways but that never worked. Except sqlplus, not a single front end tool is able to connect to database. And the surprising part is sqlplus does not require any connect string in order to connect to database, just the username and password suffice. I would really appreciate if anybody could help in this regard. I have tried another software like Erwin data modelling tool to connect to database but ... only frustration...Please help.
    Thanks,
    Mohammad

  • Officejet Pro K550 in Windows Technical Preview

    The most recent update to Windows Technical Preview Build 9879 keeps stopping the print spooler when the Officejet Pro K550 is attached. It worked fine in the previous builds. Any ideas? I need to keep the USB cable disconnected until I want to print and then uninstall the printer each time or keep restarting the print spooler each time I want to print anything.
    Thanks

    Hi,
    Try running Windows Update and check if any driver update is available, any drivers for the Technical Preview are only available from Microsoft Update servers.
    If the issue persists, you will need to wait till an update will become available by microsoft, as a beta OS you are likley to experience this kind of issues, devices hasn't have been tested much, as well as the entire operating system.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Windows To Go Device using Windows Technical Preview

    I have successfully made a Windows To Go Device by the steps in this Technet forum post:
    http://social.technet.microsoft.com/wiki/contents/articles/6991.windows-to-go-step-by-step.aspx
    Note: I used a host machine running Windows Technical Preview already to make this device, since older versions (Windows 8/8.1) of DISM don't work for imaging Windows Technical Preview Installation.
    Everything works fine. The device on which Windows To Go is running is a high-speed USB 3.0 HDD, so there is no significant performance difference. However, while updating to the new build 9860, the upgrade fails stating that you can't install it to a USB
    Flash Drive.
    Question 1) Does this problem has anything to do with the fact that I am NOT using the enterprise version of Windows Technical Preview, the only version which "technically" supports Windows To Go feature.
    Question 2) My host machine (which I used to create Windows TP) has been updated to Build 9860. Should I use DISM to capture the image of this updated build and use it to image the WTG HDD device? Can I get detailed instructions on how to do this?

    Hi G.One1,
    In current time, there is no direct way to perform the upgrade, in both Native Boot to VHD and Windows To Go.
    I was thinking a way to create a ISO file also, but the method would be a bit of complicated.
    Here is my thought and steps.
    First, if we update our Windows 10 Technical Preview for Enterprise to 9860 build, we would get a install.esd file, in Windows 8.1, here is a tool called update advisor, which would
    convert the esd file to ISO file, but in Windows 10 Technical Preview, there is no such thing. So my thought is to use the install.esd to create an install.wim or bootable ISO file.
    In my first thought, I want to sysprep an updated OS, but it failed without doubt. So, I choose to use Reset option. Install.esd would be recognized a compressed install.wim.
    I copy the install.esd to a 9841 build OS, for example, I copy it to C:\RecoveryImage, and run
    reagentc.exe /setosimage /path C:\RecoveryImage /target c:Windows /Index 1 , it cannot reset the Windows OS.
    I use Reset option in 9860 build OS, when it is finished, run sysprep, it ran well, I can capture 9860 build wim file (WDS server capture or dism command). We rename it as install.wim.
    Use the captured install.wim to set recovery image in 9841 build(copy install.wim to C:\RecoveryImage, and run
    reagentc.exe /setosimage /path C:\RecoveryImage /target c:Windows /Index 1), 9841 build succeed upgrade to 9860 build via Reset and Refresh options.
    For Windows To Go, Yes, you can use all Windows features with your Windows To Go workspace. The only currently unsupported features are using the Windows Recovery Environment and PC Reset &
    Refresh. So this way is not appropriate in your situation. But here we use these steps can convert the install.esd to install.wim, and use reset and refresh option to upgrade current build.
    Refresh would upgrade without losing setting and data. For your scenario, use dism to apply 9860 install.wim would be your option.
    Alex Zhao
    TechNet Community Support

  • I updated to itunes 11, uninstalled it according to directions, and  re-installed itunes 10.7.021 for windows 64bit.  Now Iget the message itunes library.itl cannot be read because it was created by an earlier version of itunes

    I updated my computer to Itune 11, did not like it, and uninstalled it exactly according to directions. I re-installed Itune10.7.021 for Windows 64bit, but now I keep getting the message "The file  itunes library.itl cannot be read because it was created by a newer version of itunes.  How can I resolve this problem?

    zepel has it, but perhaps some more detail will help.
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • I have photshop cs3 for windows but i now have a mac book pro and would like to install it on my mac where can i go to download it for mac and will my prod key work ?

    i have photshop cs3 for windows but i now have a mac book pro and would like to install it on my mac where can i go to download it for mac and will my prod key work ?

    Serial numbers for older versions do not work across platforms.
    At one time, when the product was current, you could get Adobe to switch you to the other platform, but I don't know whether Adobe will do that for old versions.  I do know it's not going to work if you try to use your Windows license for a Mac installation.
    -Noel

Maybe you are looking for