Hardware Driver Issues

HP Compaq Presario CQ70-116EA : P/N NG504EA
Windows Vista 32-bit
2 Issues
Device : BCD-CD V 01.02.01.01 1.11 USB Device
Error : Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
Device : TSSTcorp CDDVDW TS-L633L ATA Device
Error : Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)
CD Drive not reading any CDs/DVDs. Have updated driver and uninstalled / rescanned for new hardware. Drive discovered again but same error code as above.
Also will not recognise or power up mobile internet dongle (USB). This dongle will power up when installed in another PC.
Have scanned for viruses, etc and given all clear report.
Any help would be appreciated.

Go to your Device manager and look for any yellow or red ticks next to a device.
If there are any in the System or the Ata/Atapi controllers, you should address those first off.
Try to roll back or update those drivers that are tagged in yellow or red. These particular drivers will cause other drivers to fail as they are dependant on the parent drivers to operate.
If you cant resolve those, then you may be experiencing mainboard failure.

Similar Messages

Should I do a clean install of Mountain Lion on a late 2009 iMac or will I find hardware/driver issues?

I have a late 2009 iMac (2.93 Ghz Intel Core Duo, 4GB of ram, model id is 9.1) running Lion right now. I upgraded it all the way from Leopard using the standard keep-all-your-apps-and-settings way. After looking at the hardware requirements for Mountain Lion (and my success with running Lion) it seems that my good ol' iMac is still capable of running it fairly well. But I don't like the idea of "stacking" upgrade after upgrade (*coughs*, clean freak!). I like the idea of starting out clean this time because so many years of use has filled my mac with a lot of crap I no longer use.
So I would like to know your sane advice, and if there's anything I should check out before attempting this. Especially I'm concerned about hardware/driver related issues like for example: the webcam or speakers no longer working. Also, if there's something I'm overlooking please point it out.
Thank you in advance for any help you guys can give me. I'll be very grateful!

If it wasn't a Mac computer that originally came with either Lion or Mt Lion Pre-Installed by Apple when new you would not be able to connect to the Online Internet Recovery system. It is a Feature of the Mac EFI Firmware system. And it will only install whichever version of the Download only version of OS X that originally came on that system.
My MBP came with Lion Preinstalled. Even if I have Mt Lion installed on the hard drive the Online Internet Recovery system would always point my MBP to the Lion download as that was the original version of OS X that came on my Mac.
No real authentication needed. Since your Mac came with Mt Lion no matter what newer versionof OS X you ever install the OIRS will always point you to Mt Lion and ONLY Mt Lion.
It is something different, but not completely different, from the built in Recovery HD partition on the internal drive.
No worries as during the install of MT Lion on your SSD the installer will Recreate the Mt Lion Recovery HD partition on your SSD.

Apple iPod USB Device driver issue on Win XP - syncing shuffle 2nd gen.

Hello fellow iPod shuffle users. Any of you run into this problem using the following configurations? Any advise/recommendations/workarounds much appreciated as I've burned 3 days on this issue and I'm still stonewalled.
I personally think it's a device driver issue/bug and am searching for a way to update my Apple iPod USB device driver for Win XP. Two brand new ipod shuffles (received for Christmas 2008) are both behaving this way, so the problem most likely points to a global software issue more-so than to shuffle hardware issue.
PROBLEM STATEMENT: Driver data i/o streaming issue does not allow shuffle to sync data with iTunes after initial sync (i.e. reading the content of the shuffle is good, but writing modified content fails). Posted error message "The ipod ... cannot be synced. Required disk cannot be found". After cracking the hood on my device driver, the problem seems to point to the Apple iPod USB device driver for Win XP. Driver will recognize the shuffle and read to it, but subsequent write attempts will result in device driver balks that "this device cannot start (code 10)".
ATTEMPTED WORKAROUNDS:
*Read All "How to Get Started Manuals" to make sure I was using the right technique for syncing my two shuffles from within iTunes... tried and failed
*Ensure only one shuffle was plugged in at a time (saw notice that two shuffles plugged in at the same time is not yet a supported config)... tried and failed
*The 5 R's as recommended by Apple Support... tried and failed.
*I've tried all 3 built in USB ports on my Lenovo T60. no love... tried and failed.
*Per discussion board: From Window's Device Manager-> Scaned for new hardware while shuffle was syncing...tried and failed.
* Per Discussion board: From Window's Disk Management -> Ensured shuffle came up as a FAT32 filesystem... connection tore down as quickly as windows recognized it.... tried and failed.
*From Windows Software config utility: Ran repair to re-install itunes 8... same results.
*From Windows software management utility: Uninstalled and reinstalled itunes 8... same results.
Hardware: IBM Thinkpad/Lenovo T60. Using build in k/b & no external mouse. Has 3 USB built in ports.
Software: Windows XP Pro SP2/iTunes 8.0.2/shuffle (2nd gen) driver 1.0.4 (same behavior using the original driver 1.0.3).
Apple iPod USB Device properties:
Driver Provider - Microsoft
Driver Date - 7/1/2001
Driver Version - 5.1.2535.0
Digital Signer - Microsoft Windows Publisher

Hi. Ive got pretty much the same problem.... Got a new shuffle for christmas..having real problems syncing with itunes. Funnily enough I managed to get 25 tracks on it but then it just stopped. error message says " The ipod shuffle cannot be synced. The required disk cannot be found." Ive done restore, and downloaded a reset utility thingy to try but still no joy.

Incredibly slow MacBook, Internal Hard Drive issues...

Good morning everybody! I'm apologize if this post is extremely wordy...
I am extremely baffled by a particular issue with a MacBook 2.0GHz C2D which belongs to a friend of mine. The warranty is expired.
_Brief history:_
Several months ago, this MacBook could not find a bootable volume. The drive would not mount when booting from an external FireWire hard drive. It would not mount when the MacBook was put in Target Disk Mode and connected to another Mac. When booting from an external USB hard drive or with my MacBook Pro connected to the MacBook via Target Disk Mode, the MacBook booted up quickly. I came to the conclusion that the internal hard drive must have failed and needed to be replaced. Ultimately, the data was not recoverable from this drive.
I then proceeded to swap out the defective Apple OEM Seagate hard drive with a known working Apple OEM Fujitsu hard drive. When booting from the Leopard Install DVD, the MacBook would boot incredibly slow, but would finally reach the Installer Language screen. When proceeding to install Leopard, the drive would take a very long time to have data written to it, and ultimately the install failed. I removed the new hard drive from the MacBook and placed it in an external USB enclosure, attached it to the MacBook and booted from the Leopard Install DVD. Leopard would install successfully. I removed the hard drive from the enclosure and reinstalled it the MacBook. When booting from the freshly installed OS, the MacBook would take a very long time to boot. The MacBook is extremely slow!!!
I checked the Activity Monitor to ensure CPU & System Memory Usage was not going crazy. All Processes where normal with adequate CPU & Memory headroom.
I took the MacBook apart thinking that the SATA Controller Cable might be loose. No, it was firmly in place. I reassembled the MacBook and booted it up again. Still incredibly slow!
Finally, after several reboot attempts, the MacBook would book up quickly and operation was perfect. I applied all updates and continued testing the MacBook with great success. Gave my friend his MacBook back and he was grateful.
_Now for the kicker..._
My friend brought me his MacBook a week ago complaining that the MacBook was operating extremely slow (much like when I was initially testing it before). I verified the MacBook was slow when I tried using it. I tried several reboots and then it would get stuck on the gray Apple with spinning gear.
I tried booting into Single User Mode, but it gets stuck on "Waiting for root device"
I put the MacBook in Target Disk Mode and connected it to my G5 2.0GHz Dual Core. The hard drive would mount quickly on the G5 and I used Disk Utility to create a Restore Image. The disk operation would perform normally and the image would be created successfully.
I then partitioned the MacBook's hard drive when connected to the G5, ejected and proceeded to attempt OS reinstall. No dice! The hard drive is not even detected by the Disk Utility on the Leopard Install DVD.
Finally after several reattempts, the hard drive is recognized, but is extremely slow when trying to reinstall...and again, ultimately install fails. Using Disk Utility from Leopard Install DVD, the hard drive fails to unmount when I try formatting.
I don't have Apple Hardware Test disc for the MacBook or Apple Service Diagnostics disc for this model. Running TechTool Pro shows hardware to be okay, disk controller onboard the Fujitsu drive is okay, but running SMART & Surface Scan takes a long, long time (which I'm certain will ultimately error out). Running Drive Genius takes a long, long time as well.
Conclusion:
I think the SATA Controller Cable is defective. I can't think of anything else that would cause disk errors or performance issues like this. Your input is truly appreciated!

Even though no one responded to my post, I thought I'd share the resolution with the entire Apple community. I hope this information will be helpful to some of you with MacBooks or MacBook Pros that may be running painfully slow or may be exhibiting hard drive issues because your machine won't recognize the boot drive or fails to properly boot on a perfectly healthy S.M.A.R.T. verified hard drive. It just might be the hard drive connector/cable. Here it goes...
I visited my local Apple Retail Store and asked a "Genius" at the Genius Bar about this issue and told him my thoughts about a possible failed hard drive connector/cable. First, he didn't even know what a hard drive connector was! Then, he arrogantly stated that he never heard of such a thing and that these cables never fail. Finally, he blatantly dispelled this as a possibility.
On the contrary with my experience, I have had many failed PATA controller cables that required replacement when supporting the desktop PC's at work. I have personally owned and supported many Apple manufactured laptops and desktops and have never encountered this issue on a Mac...until this MacBook!
So, after looking at the Service Manual for the MacBook, I went over to my local Apple Authorized Service Provider and purchased the Hard Drive Connector Apple Part #922-7579. I replaced the original cable, reassembled and proceeded to boot the MacBook with the Leopard DVD installer. The Fujitsu drive was immediately recognized and was able to be formatted and Leopard installed without incident. The MacBook boots off the internal hard drive as normal again and works nice and fast again.
Thank you all for your time!
:D

ITunes for 64bit Windows 7 Driver/CD/DVD/Drive Issues-

Hi There
I am sure that there are many many users out there suffering the same frustration as me in regard to ITunes just not working properly with Windoews 7 (64Bit).
I have been trying to solve the mystery of "ITunes for Windows Registry Settings Warning When Opening Itunes.
I have tried all the recommended actions to correct this problem without any success and I do mean ALL.
Below is a screen shot of my registry, can anyone see anything wrong with it?
In the meantime (Last four months) I have stopped using ITunes and instead have used Digital 7, this will be my very last attempt to get ITunes working properly, failure will mean consigning ITunes to the same place as any other Software that does not do wshat it says on the can.
I hope someone can help.

That's good that it is in device manager, but what about in Computer with the rest of the drivers?
Also, are the drives listed in Computer and device manager or just device manager?
I want to verify if the symptoms are present for a particular software issue before looking at other issues. I really doubt it is a driver issue at this point. If it was, then I suspect the issue would be present from day one.
It could be that the lens has dust buildup preventing it from working properly. They do make CD cleaning kits that have a special CD designed to clean the laser as it passes over the lens. If you happen to have one of these, or access to one, I recommend trying this step to make sure it isn't as simple as dust buildup interfering with the laser.
It could also be hardware failure, but I would like to try a few other steps before coming to that conclusion.
It may be worth reviewing this document as it covers a lot of the most common issues behind DVD drive issues. Feel free to skip any steps you have already tried.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I still have Cd/DVD drive issues

The CD is ejected after a short while and never mounted. I have cleaned the optics of the CD drive and reset my PRAM.
Has anybody discovered a complete solution for this problem.

That's good that it is in device manager, but what about in Computer with the rest of the drivers?
Also, are the drives listed in Computer and device manager or just device manager?
I want to verify if the symptoms are present for a particular software issue before looking at other issues. I really doubt it is a driver issue at this point. If it was, then I suspect the issue would be present from day one.
It could be that the lens has dust buildup preventing it from working properly. They do make CD cleaning kits that have a special CD designed to clean the laser as it passes over the lens. If you happen to have one of these, or access to one, I recommend trying this step to make sure it isn't as simple as dust buildup interfering with the laser.
It could also be hardware failure, but I would like to try a few other steps before coming to that conclusion.
It may be worth reviewing this document as it covers a lot of the most common issues behind DVD drive issues. Feel free to skip any steps you have already tried.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Firewire Driver issue

Anyone using M-Audio Firewire 1814 still experiencing Driver issues with Snow Leopard and LP9? There was an update on 11/13 and 11/14 but my Firewire still isn't working. Anyone got any ideas? This is absolutely crazy that M-Audio hasn't got itself organized. Make me think twice about purchasing another one of their pieces of equipment. This is crap!!

Thanks guys for replying - I'm very grateful.
I have reset PRAM, bought a new FW cable, de-installed and reinstalled OS X and APOGEE user interface. I do not have any other FW devices unfortunately but I can try it on friends so will do that to rule out a hardware fault. The mini has only been in my possession since early jan and it was a completely clean unit - no apps or software etc.
The one suggestion I do not follow above is the Partition startup or Mavericks start up - sorry.,...what does that mean ? I do have 2 500gb drives plus 2 external HDD so storage is no problem. I will also try the SMC suggestion as I don't think I followed those steps clearly last time.
Again, thanks for your time. wish me luck - all I want to do is play and record my music !!!

Ogre 3D 'glGetString' Problem, May Be Driver Issue

Hello!
I'm relatively new to Arch Linux, all I did till now was install it and get X running with the 'awesome' window manager. I must say, I like it, especially pacman, AUR and ABS.
I'm a hobbyist programmer and I generally write graphics applications (games) with Ogre 3D. I decided to get Ogre 3D and build it. I got the latest SVN HEAD, and built it, it built fine. However, when I run a sample, I get the following error (which occurs right when it tries to create the GLX subsystem):-
OgreGLSupport.cpp:57: virtual void Ogre::GLSupport::initialiseExtensions: Assertion `pcVer && "Problems getting GL version string using glGetString"' failed
I've run Ogre 3D applications both on Windows and Ubuntu on this very same laptop, so I don't think its a hardware issue. It may be a driver issue though. I have 'xf86-video-intel' installed, and hotplugging turned off with "AutoAddDevices" "False" in xorg.conf. 'lspci | grep VGA' gives:-
Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
It is possible that it's an Ogre specific issue, but I still thought I'd mention it here because it could also have to do with drivers and other configuration stuff.
To check whether glGetString() works, I took the program from the second NeHe tutorial and modified it to spit out glGetString results, and it says "Vendor: Mesa Project, Renderer: Software Rasterizer, Version: 2.1 Mesa 7.2".
I've also run some other graphics applications (the Bullet physics engine (which I just built today) demos), and they run much slower than how they did on Windows and Ubuntu.
Any ideas what the problem is and how to fix it?
Thanks for your help!
Last edited by nikki (2009-01-06 12:41:27)

Humnn... I don't know. How I "solved" it today: downgrade xorg-server to 1.5.3, catalyst to 9.4 and kernel to 2.6.28. Now I have my game working again. I think it was only a problem with the driver... I'll try to upgrade asap.

Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

Has anyone else been having hard drive issues with 13" MacBook Pro barely a year old?

Yes, BUT...
... there are many problems that are really easy to eliminate by replacing the Hard drive, including ones that have nothing to do with actual Drive Hardware failure. These include corrupted install of Mac OS X, its EFI partition, clobbered partition tables, or the appearance of Bad Blocks in a critical area.
Any of these problems can sometimes be eliminated by re-initializing the entire drive and writing Zeroes, and re-installing from scratch. The trouble is, this process takes hours to complete, and is not guaranteed to be successful -- you may still need a new drive after all that effort.
I learned from my Plumber that consumers have no appetite for solutions that might work, and detest return visits for any related problems whatsoever. You or your friend may have had your drive replaced, not because it actually failed, but because the situation was troublesome, and the provider thought you would not tolerate anything less than a crisp, complete fix on the first attempt. And based on the cost of technician time, it may have even been cheaper that way.

ThinkPad USB Keyboard with TrackPoint (55Y9053) driver issue (keys not working)

Hello!
I bought this external keyboard yesterday for my Dell desktop running windows 7 (professional) because I liked the thinkpad keyboard in my thinkpad t400. After plugging in to my desktop and installing the drivers that came in the CD, I noticed some keys (u, o, m, enter(return), l) were not working, i.e., nothing get displayed when I press those keys . When I tried installing it on thinkpad t400 running Windows 7 professional, the same non-working keys were displaying numbers instead of alphabet values.
Please note the keyboard is not 55Y9003 but the newer version 55Y9053. Also, note the trackpoint worked well including scrolling and all other keys were working. Interestingly, when I plugged this keyboard on Ubuntu machine (desktop and laptop), everything worked well without even installing any drivers.
I initially thought it was a hardware problem and got replacement from Amazon. Both the keyboards exhibit the same problem. Given the fact it works nicely on Ubuntu, I think this is a driver issue. I tried installing drivers from thinkpad site including versions 1.6 and 1.7.
I would appreciate if someone can help with the right drivers.
Thank you,
Vinai
Solved!
Go to Solution.

How does the keyboard compare to the one on the T400? I'm considering purchasing one for my desktop because I'm addicted to the TrackPoint.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

X-Fi I/O Drive SPDIF input stopped working - driver issue?

HI have an X-Fi Platinum card with the I/O Dri've module that I have been using for some time now to accept digital input via digital coaxial cable from my Alesis Multimix 6 music mixer to mix down and record MP3s from my hardware music synthesizers. I am running Windows XP SP3. The SPDIF input has always worked like a charm until I updated the driver via Creative AutoUpdate. The SPDIF input no longer registers any signal, but it still shows in both Creative Volume Panel and Windows Volume Control. Default sound input and output is set to X-Fi (D000). I tried uninstalling the new driver and reinstalling the original driver, and the SPDIF input is still dead.
Is this a known driver issue? Any idea on how I can get this working again?
Thanks, all.
Larry

I/O dri've now works with this software?http://forums.creative.com/creativel...essage.id=7369?which includes the 3/5/07 driver. Steve

N9 audio driver issue with music player with PR1.2

Seems that N9 PR1.2 would not completely initialize audio hardware for playing mp3s.
I've downloaded some Science Friday podcasts, and try to play them back with default music player. Occasionally, if I try to seek in the stream, or for some other reason the audio gets stops playing, or jumps back to beginning of track. Kind of like a needle would jump on a vinyl disk.
When that happens, it does not fix itself by exiting the music player. It obviously tries to do something, as if I leave it playing sometimes after tens of seconds of silence it will try to play for a few seconds or so, usually looping the same segment.
To be sure that the file was not corrupted I ran md5 on it comparing it to original on my hard drive, and it is ok. This behaviour also repeats itself with different files. Once it starts misbehaving, I can't play any files, even those I've already listened.
Rebooting the phone does not help either, which is why I suspect a driver issue, not properly initializing some hardware registers. If I let the battery run empty it seems to correct itself after recharge and reboot.
Has anyone else run into this? Any workarounds or fixes?

I have the same problem and i "fixed" it with using a new music player, "FlowPlayer" and then it works...
It have to be a problem with the nokia music player! I realy hope the problem will be fixed in the firmware version pr1.3!

This has to be a Mac OS X driver issue - My Bluetooth Mouse just this secon

My Bluetooth Mouse just this second stop working.

My Bluetooth Mouse just this second stop working.
And? Are you expecting someone to be able to diagnose and solve the problem for you based on that statement?
Why are you so certain it "has to be a Mac OS X driver issue"? Have you done something to the Bluetooth system software +"just this second"+ which has caused it stop working?
Some other possibilities are:
• Batteries could've run out.
• Bluetooth hardware in the mouse could've failed
• Bluetooth hardware in the Mac could've failed
• Bluetooth preferences could be corrupted
• Mac and Mouse may have lost their "pairing" info
Unfortunately as you've not provided any information about the problem whatsoever, not even told us what brand or model of Bluetooth mouse you're referring to, or mentioned *a single thing* you've tried already to resolve this, its impossible to help any further.

Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).

Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

Very slow wine game/nouveau driver issue

Hello everyone, I'm trying to play a game (Civ 4) using wine. However, it was extremely laggy, and since it runs well on Windows (I have dualboot) plus it's not a very recent game and my laptop is reasonnably well-equipped, I thought it should work well on arch as well. Here is the link in the wine db. I should also add that I'm a very novice wine user so that might well be the (a) source of problem(s). Apart from the lagging, according to the sensors, the CPU's temperature rose from ~50°C to ~100°C within about A MINUTE.
I checked cpupower to see that the cpu was allowed to run at max speed and tried optirun to use the NVIDIA graphics card rather than the Intel graphics card I have installed. I'm by no means sure that the drivers are installed or configured properly by the way...
Starting with optirun looked to work (the loading screen came up) but when the main window should've been loaded, the application terminated with the following output:
err:winediag:wined3d_dll_init The GLSL shader backend has been disabled. You get to keep all the pieces if it breaks.
libGL error: dlopen /usr/lib32/xorg/modules/dri/nouveau_dri.so failed (/usr/lib32/xorg/modules/dri/nouveau_dri.so: wrong ELF class: ELFCLASS64)
libGL error: unable to load driver: nouveau_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: nouveau
libGL error: dlopen /usr/lib32/xorg/modules/dri/i965_dri.so failed (/usr/lib32/xorg/modules/dri/i965_dri.so: cannot open shared object file: No such file or directory)
libGL error: unable to load driver: i965_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: i965
[VGL] ERROR: glXCreateContextAttribsARB symbol not loaded
terminate called without an active exception
Before today I only used optirun for VLC (though I don't really see a difference) and to check whether it would run with glxgears. Neither case had any problems. I tried softlinking nouveau_dri.so from the "/usr/lib/..." to the "/usr/lib32/..." directory as well as copying it but neither helped.
Some info:
Graphic cards:
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/820M / GT 620M/625M/630M/720M] (rev ff)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
Packages:
local/xf86-video-intel 2.99.916-2 (xorg-drivers xorg)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-nouveau 1.0.11-1 (xorg-drivers xorg)
Open Source 2D acceleration driver for nVidia cards
local/nouveau-dri 10.2.8-1
Mesa drivers for Nouveau
local/bumblebee 3.2.1-3
NVIDIA Optimus support for Linux through VirtualGL
Some advice how to fix the driver issue or about what else might be causing the problems is greatly appreciated!

Besides agreeing with the notion above, you lack lib32-nouveau-dri and thus are unable to use acceleration with 32bit programs which is the undelying issue here.

Hardware Driver Issues

Similar Messages

Maybe you are looking for