Hardware error system Halted

Bought 30 computers with Windows 7 to replace XP machines. Made the initial install of all the software needed and assigned static ip addresses and to make sure I didn't have any DOA machines.
When reattaching a client computer to the network the server 2008 r2 domain controller, has a hardware fault and halts.
I'm trying to figure out what would cause that to happen. I'm already pulled it and going to re-install windows 7 on it. I'm just want to know what is causing it.
Anyone with an idea why?
Thx,
Bill

Thanks for the reply.
The 7 computer itself isn't freezing. It causes the server to blue screen, "Hardware fault" "System Halted". It happens every time it is turned on while connected to the network.
It has a static IP address. I moved it to another office to test the wiring and it halted the server from that office too. This machine was connected before when I initially set it up with name, IP address and the default software we use and make to make
sure it wasn't DOA.
Needless to say I've taken this machine out of service. I'm going to reinstall Win7 on it and then try it again.
Any other ideas?
Bill

Similar Messages

Hp Compaq Mini 700-Fatal Error System Halted CNU9122NHV

Hi I us in my computer Linux Mint i think so but now i start my computer and get this message..
Fatal Error System Halted CNU9122NHV.
I am not so good in english are from Sweden..And i hope someone can help me..
Thank you!!

CNU9122NHV IS THE CODE FATAL ERROR. I am not from USA Or London..I can read and write better in Swedish my english is ok not to good! I hope someone here give rigth code to my computer...

HP MINI 110 FATAL ERROR SYSTEM HALTED . [edited] .!!!

HP MINI 110 LAPTOP FATAL ERROR SYSTEM HALTED .
[edited Serial Number by Moderator]
plz ANYbody SOLVE THAT PROBLEM. I HAV NOT OPEN MY LAP SINCE 3 MONths..

Cowboys try. e9lo3qquu9 3rd letter lowercase L. 4th letter lowercase O. 6th and 7th letter lowercase Q. Use that code to go into the BIOS. Disable all passwords that are enabled. If asked for the CURRENT password use that code. If asked for NEW password just hit enter. If asked to VERIFY password just hit enter. Save and exit. REO I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.

HP MINI 110 FATAL ERROR SYSTEM HALTED

Hi, I have a HP MINI 110 and I forgot the password for bios.
After three unsuccessful attempts on the screen appears: FATAL ERROR SYSTEM HALTED CNU9459FB0
s/n(Personal information removed by Moderator) - p/n: VJ205EA#UUZ
Thank you
Text translated with google
This question was solved.
View Solution.

Hi,
Enter: e9lovqo8p1 ( 3rd character is a lower case L )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Password Check Failed, Fatal Error, System Halted, CNU949701P

Hello!
I have a HP netbook model Mini CQ 10, and I have not switched it on in a while.
I recently went to turn it on to recover some important documents and this error message shows up;
Password check failed
Fatal Error... System Halted
CNU949701P
Canu anyone PLEASE HELP ME! I would be so grateful!
Thank you!
x
This question was solved.
View Solution.

Try >> e9lovox132
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Password check failed fatal error system halted CNU9384PJY

BOOTING ENTER CURRENT PASSWORD THREE TIMES GOES TO PASSWORD CHECK FAILED FATAL ERROR SYSTEM HALTEDCNU9384PJY AFTER NETBOOK SET UP FOR A WHILE THANKS FOR ANY HELP

Enter: e9lofuv2wi ( 3rd character is a llower case L ) Regards, DP-K

HELP! Fatal error system halted CNU00974PL in compaq mini CQ10

The Bios is not working, it only shows that I need a password! but i don't have any.. someone, please help me!!

Please try this password: e9l11oxv2k Steps to be followed after you reset the password:Use the unlock code posted above to enter the BIOSDisable all passwords that are enabledIf asked for current password - type the unlock codeFor new password, just press ENTER keyRepeat the same for verify password column.Then leave the BIOS by saving & exit option to save the changes. Troubleshooting Steps:Incase if the Password doesn’t work please try a Hard Reset as follows.Shut down the notebookUnplug the AC Adapter and then remove the batteryHold down the Power button for 30 secondsPlug in the Power/AC Adapter (Leave the battery out for the moment) & Start the NotebookIf you now see a password box, Please type the same Password I shared before and press enter Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,KNRKAlthough I am an HP employee, I am speaking for myself and not for HP

Re: hp mini fatal error system halted. CNU9363XZL NEED PASSWORD HELP????

Thanks you for help!! Godbless.....
This question was solved.
View Solution.

Hi,
Try entering:    e9lofgf40k      ( Note that in both cases, the 3rd character is a lower case L and the 9th is Zero )
                                      or
                              e9lofgfr0k
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hp mini 110-1140 Fatal Error... System Halted. CNU94542R9 Need password to log on!

HP MINI FATAL ERROR SYSTEM HALTED .CNU94542R9 . Need password to log on!
Please Anybody SOLVE THAT PROBLEM. I HAV NOT OPEN MY PC SINCE one year, plz help me if you can?.
This question was solved.
View Solution.

Hi,
Good to hear it's Ok
You can remove the need for a power on password as follows - use the code from my previous post where necessary.
Shut down the notebook. Tap away at the esc key as soon as you press the power button to access the Start-up menu and then select f10 to enter the Bios menu. Use the arrow keys to highlight the Security tab and hit enter. Use the arrow keys again to highlight power on password and hit enter. Enter the current password ( use the code in my previous post ) and then for the new password, just leave this blank and hit enter - do the same for the confirmation field. Press f10, select to save the new settings and hit enter.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Compaq mini 700 enter current password fatal error system hatled

Compaq mini 700 laptop fatal error system halted.
CNU9192NQN
Can you help me plz ?
This question was solved.
View Solution.

Hi
Try this : e9lo3o7959
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

System Halted CNU92131LL

Hello,
I have a HP Mini 110 Fatal Error System Halted CNU92131LL please help;
Thank You

Hi,
Please be aware that this is not supported by HP and you try it at your own risk.
Try entering: e9lo73f3kk ( Note that the 3rd character is a lower case L )
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Photoshop "Unable to continue because of a hardware or system error.

Originally installed adobe photoshop cs. This couldn't be activated and support was contact they advised to uninstall and install adobe photoshop cs2 with a serial number provided that was provided with the link. CS couldn't be uninstalled due to the following errors 'epmty temp folder' (which was done) 'program may be in use' (it wasn't) 'no internet connectivity' (internet connectivity was active). Support couldn't assist with this. So Cs2 was installed and activated successfully. However as soon as photoshop is started the following error is displayed "Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable." I've reset prefences and also removed the nvidia video driver after reading a thread photoshop has known issues with nvidia drivers. Also tried logging in an another user. I am now out of ideas as to what to try to get this to work. Can anyone suggest anything that may get this resolved.
Thanks

zipform wrote:
Originally installed adobe photoshop cs. This couldn't be activated and support was contact they advised to uninstall and install adobe photoshop cs2 with a serial number provided that was provided with the link. Thanks
You mention a link. Did you download the special CS2 installation file, and not use an original CS2 file?
Your system originally had CS on it? CS is ten years old. How old is the computer you are using?
http://en.wikipedia.org/wiki/Adobe_Photoshop#CS
How does this system stack up with the minimum requirements for CS2?
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-photoshop.html#main_ Older_Versions
Remember these are _minimum_ requirements, which in reality means not even close!
If you think your system should be up to it, do what Station said, and give us a very full description of your system and operating system. (Unless it is Windows XP. )

Unable to continue because of hardware or system error. Sorry, but this error is unrecoverable

photoshop cs3 stopped working. get error - unable to continue because of a hardware or system error. Sorry but the error is unrecoverable. Reloaded software - but not resolved. Any advice? Someone mentioned Settings files or profiles?

This occoured in Photoshop CS3 today. All other Adobe products are functioning normaly on this system. Premiear CS3, Encore, Audition function fine. Photoshop was working fine then failedduring the evening. We have removed and reloaded Photoshop CS3 and recieve the same error. Still the remaining Products run as expected. All other Aplications on the system run normaly as well. No other indications of hardware issues are logging. There is ample memory and space available on this system.
Someone else suggested I trash my PREFS (I am not sure How I proceed in doing that - any advice on how to delete the prefs - willing to try that at this point) Thanks

Photoshop CS3 stopped working - Error - Unable to continue because of a hardware or system error.

Unable to continue because of hardware or system error. Sorry, but this error is unrecoverable. (reinstalled software (CS3) not working. Next step - Any advice please?

Hi
This forum serves Photoshop.com, an online portal and service, separate from the desktop app. Could you please repost your question here: http://forums.adobe.com/community/photoshop/general
Thanks,
Charlie

Unable to continue: hardware or system error

Hello,
I tried starting up PE8 today, and received this message:
Unable to continue because of a hardware or system error. Sorry, but this error is unrecoverable.
This only occurs while opening "Edit," but not "Organize."
I'm fairly certain I know what has caused the error - I uninstalled an old trial version of Premiere Elements the other day, just to clear out some space on my computer, and I'm guessing that uninstalled something that shouldn't have been uninstalled, something that was also used by Photoshop Elements.
I have already tried the resetting/deleting the preferences folder.
My version is Photoshop Elements 8.0. My OS is Windows 8, 64 bit. RAM is 8.0 (7.4 usable).
I have a license for two computers, and both licenses are in use.
Is this error really unrecoverable? Any help would be greatly appreciated.

i777k
Deleting the settings file has been known to resolve this type of issue. How did you go about resetting/deleting the preferences folder?
http://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements. html
Was it the Adobe Premiere Elements 8 Prefs.psp file that you deleted?
Or did you go the Ctrl+Alt+Shift hold down as you clicked (held click) on the Editor tab of the Photoshop Elements 8 Welcome Screen?
What antivirus program do you have? McAfee or other? Have you disabled the antivirus program to determine if that had any affect on the
issue?
If you have not already and nothing else is resolving the issue, consider a deactivation, uninstall, reinstall with a ccleaner run through between the uninstall and the reinstall.
https://www.piriform.com/ccleaner
We will be watching for your results.
ATR

Hardware error system Halted

Similar Messages

Maybe you are looking for