Hardware failure on my iphone 4
my iphone 4 has a hardware failure, however it will work then it will break with my volume, vibrate and charging. if i take my iphone into an apple store what will they do to stop my iphone from playing up
Apple Store does not repair iPhone 4. If under Warranty or AppleCare, they will replace it with an identical perfect iPhone 4, same color, same GB, same everything. If no coverage, and replacement iPhone is needed, Replacement iPhone 4 is $149.
Similar Messages
-
Hello,
My ear speaker has failed in my two year old iPhone 4s. As this is a hardware failure under New Zealands consumers guarantees act apple is liable and is legally obligated to replace my device. Since I ordered my phone online from the apple nz store and New Zealand dosen't have an official apple store, how do I go about making the claim?Call AppleCare. They will explain your options.
-
I bought the iphone 5 has not been one week do not understand why the home key of the time activities at stops working, not crash or fall. hope its help, probably due to software, not hardware failure, what do I do now?
Restore iPhone with current iTunes on computer. See if better. If still problem, make Genius reservation or set up Service and take or send to Apple for resolution. Of if easier for you, take receipt and iPhone, box and everything and return to where you bought it.
-
IPhone hardware failure in 1 yr 2 months! Can anything be done for replacement?
I had purchased an iPhone 5 in Nov 2012 here in India (Bangalore) for ~ Rs 45,000.
However for the past few months it started crashing mysteriously. For the last few days the frequency of crash increased to 20-30 times a day (from the previous 2-3 times a week). Recently after a crash, it rebooted upto the "Recovery Mode" screen only.
I tried with the latest iTunes to do recovery but it always failed at the _end_ of writing the new software. I even tried the DFU mode, but that too fails right at the end of writing the new software. Sometimes it gave error 12 and sometimes error 9. I've tried different USB cables just to make sure there was no problem there but to no avail!
I then showed it to the Apple service center folks here (service is provided by an Apple authorised service unit - Ample) but they too were unable to fix it. They said it was a "rare" internal hardware failure. They are asking me to cough up Rs 21,000 for a replacement unit!
It's barely 2 months out of the warrannty period when the dam phone crashed. This is real poor quality of service from Apple. Is there anything I can do to get my unit replaced? Is there an escalation I can do to get someone's attention in fixing my issue?
TIA for any tips.For the first part, that does beg the question whether this is something that is more of a problem with iCloud than it is other providers, for whatever reason.
I'm not a huge fan of anecdotal "evidence" in general, but iCloud mail does seem to have the worst reputation for missing messages when compared to Gmail or even Outlook.com, at least going by a quick search. For other iCloud mail users, does this ever concern you? Any former iCloud users who left for similar reasons? -
A hardware failure could cause applications to crash?
hi
A hardware failure could cause applications to crash ??stack in respring during a safari work
its iPhone 4..all the time crashing ...any idea will be gladly accepted..
it is not jailbroken. it is not a recovery thing. . i did a clean Restore without a Restor from backup? Version 6.0.1 ... Is there anything hardware-based Wide that could cause such phenomena?? What element or antenna or chip can do this ?. I'm really desperate I have never met such a bug.
thanksA hardware failure could cause applications to crash?
hi
A hardware failure could cause applications to crash ??stack in respring during a safari work
its iPhone 4..all the time crashing ...any idea will be gladly accepted..
it is not jailbroken. it is not a recovery thing. . i did a clean Restore without a Restor from backup? Version 6.0.1 ... Is there anything hardware-based Wide that could cause such phenomena?? What element or antenna or chip can do this ?. I'm really desperate I have never met such a bug.
thanks -
Suddenly Quiet Earpiece: Hardware Failure?
About a day after I got my iPhone 3G, I was on a call with my daughter, and suddenly the earpiece audio became very quiet. In subsequent experimentation, when I switched to speaker, I wasn't sure whether the speaker was OK or not, but it also seemed kinda quiet. However, I discovered that the audio level on headphones is fine.
I went to the Apple store, and they showed me how to reboot it (hold down the home and off buttons for a few seconds). After doing that, talking with the Apple-store folks we agreed that the earpiece audio is indeed still very quiet, but I'm pretty confident that the speaker-phone audio is fine, and headphone audio is still definitely fine.
They made an appointment for me at the genius bar this evening, to see if there's any other possible explanation other than a hardware failure.
In the meantime, I'd like to ask if any of you have seen this symptom too. Is this perhaps a known quirk that can be fixed, or perhaps a fairly-common hardware failure?
I certainly haven't dropped it or abused it in any other way, either at the time the audio level fell, or at any time before or after that call.The genius bar fellow agreed that it must be a hardware problem and replaced the phone. It sounds fine now.
-
Oracle DB offline after server reboot / hardware failure
Hi,
We have a server that crashed due to hardware failure and although brought back up OK Oracle DB's are no longer mounting. I am not a DBA but it looks bad to me and it seems there are no backups. Can anyone suggest a course of action? This is Oracle 11G XE running on Centos 6. I have put as much detail in as I can and could really do with some advice.
[root@627963 trace]# sqlplus /nolog
SQL*Plus: Release 11.2.0.2.0 Production on Thu Sep 12 23:18:26 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
SQL> connect sys as sysdba;
Enter password:
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 1068937216 bytes
Fixed Size 2233344 bytes
Variable Size 893389824 bytes
Database Buffers 167772160 bytes
Redo Buffers 5541888 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 10571
Session ID: 62 Serial number: 3
SQL> startup /nomount
SP2-0714: invalid combination of STARTUP options
SQL> startup nomount
ORA-24324: service handle not initialized
ORA-01041: internal error. hostdef extension doesn't exist
SQL>
Alert_XE.log:
Thu Sep 12 21:26:18 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =19
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/xe/dbs/spfileXE.ora
System parameters with non-default values:
sessions = 180
memory_target = 1G
control_files = "/u01/app/oracle/oradata/XE/control.dbf"
compatible = "11.2.0.0.0"
db_recovery_file_dest = "/u01/app/oracle/fast_recovery_area"
db_recovery_file_dest_size= 20G
undo_management = "AUTO"
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
dispatchers = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers = 4
job_queue_processes = 4
audit_file_dest = "/u01/app/oracle/admin/XE/adump"
db_name = "XE"
open_cursors = 300
diagnostic_dest = "/u01/app/oracle"
Thu Sep 12 21:26:20 2013
PMON started with pid=2, OS id=21388
Thu Sep 12 21:26:20 2013
"alert_XE.log" 342L, 17231C
Thu Sep 12 21:26:20 2013
PSP0 started with pid=3, OS id=21390
Thu Sep 12 21:26:21 2013
VKTM started with pid=4, OS id=21392
VKTM running at (100ms) precision
Thu Sep 12 21:26:21 2013
GEN0 started with pid=5, OS id=21396
Thu Sep 12 21:26:21 2013
DIAG started with pid=6, OS id=21398
Thu Sep 12 21:26:21 2013
DBRM started with pid=7, OS id=21400
Thu Sep 12 21:26:21 2013
DIA0 started with pid=8, OS id=21402
Thu Sep 12 21:26:21 2013
MMAN started with pid=9, OS id=21404
Thu Sep 12 21:26:21 2013
DBW0 started with pid=10, OS id=21406
Thu Sep 12 21:26:21 2013
DBW1 started with pid=11, OS id=21408
Thu Sep 12 21:26:21 2013
DBW2 started with pid=12, OS id=21410
Thu Sep 12 21:26:21 2013
LGWR started with pid=13, OS id=21412
Thu Sep 12 21:26:21 2013
CKPT started with pid=14, OS id=21414
Thu Sep 12 21:26:21 2013
SMON started with pid=15, OS id=21416
Thu Sep 12 21:26:21 2013
RECO started with pid=16, OS id=21418
Thu Sep 12 21:26:21 2013
RECO started with pid=16, OS id=21418
Thu Sep 12 21:26:21 2013
MMON started with pid=17, OS id=21420
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
Thu Sep 12 21:26:21 2013
MMNL started with pid=18, OS id=21422
starting up 4 shared server(s) ...
ORACLE_BASE not set in environment. It is recommended
that ORACLE_BASE be set in the environment
Reusing ORACLE_BASE from an earlier startup = /u01/app/oracle
Thu Sep 12 21:26:21 2013
ALTER DATABASE MOUNT
Thu Sep 12 21:26:24 2013
Sweep [inc][21794]: completed
Sweep [inc][21793]: completed
Sweep [inc2][21794]: completed
Successful mount of redo thread 1, with mount id 2707110077
Database mounted in Exclusive Mode
Lost write protection disabled
Completed: ALTER DATABASE MOUNT
Thu Sep 12 21:26:25 2013
ALTER DATABASE OPEN
Beginning crash recovery of 1 threads
Started redo scan
Completed redo scan
read 93 KB redo, 34 data blocks need recovery
Started redo application at
Thread 1: logseq 241, block 21190
Recovery of Online Redo Log: Thread 1 Group 1 Seq 241 Reading mem 0
Mem# 0: /u01/app/oracle/fast_recovery_area/XE/onlinelog/o1_mf_1_8kxhwjco_.log
Exception [type: SIGBUS, Non-existent physical address] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8, _wordcopy_bwd_dest_aligned()+280] [flags: 0x0, count: 1]
Errors in file /u01/app/oracle/diag/rdbms/xe/XE/trace/XE_ora_21440.trc (incident=22593):
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8] [Non-existent physical address] []
Incident details in: /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22593/XE_ora_21440_i22593.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Exception [type: SIGSEGV, Address not mapped to object] [ADDR:0x7C7FD5E7FFEC] [PC:0x444FE70, kcbs_dump_adv_state()+946] [flags: 0x0, count: 2]
Errors in file /u01/app/oracle/diag/rdbms/xe/XE/trace/XE_ora_21440.trc (incident=22594):
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+946] [SIGSEGV] [ADDR:0x7C7FD5E7FFEC] [PC:0x444FE70] [Address not mapped to object] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8] [Non-existent physical address] []
Incident details in: /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22594/XE_ora_21440_i22594.trc
Use ADRCI or Support Workbench to package the incident.
See Note 411.1 at My Oracle Support for error and packaging details.
Dumping diagnostic data in directory=[cdmp_20130912212627], requested by (instance=1, osid=21440), summary=[incident=22593].
Errors in file /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22593/XE_ora_21440_i22593.trc:
ORA-00607: Internal error occurred while making a change to a data block
ORA-00602: internal programming exception
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+946] [SIGSEGV] [ADDR:0x7C7FD5E7FFEC] [PC:0x444FE70] [Address not mapped to object] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8] [Non-existent physical address] []
PMON (ospid: 21388): terminating the instance due to error 397
System state dump requested by (instance=1, osid=21388 (PMON)), summary=[abnormal instance termination].
System State dumped to trace file /u01/app/oracle/diag/rdbms/xe/XE/trace/XE_diag_21398.trc
Dumping diagnostic data in directory=[cdmp_20130912212628], requested by (instance=1, osid=21388 (PMON)), summary=[abnormal instance termination].
Instance terminated by PMON, pid = 21388
Thu Sep 12 21:39:03 2013
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =19
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production.
Using parameter settings in server-side spfile /u01/app/oracle/product/11.2.0/xe/dbs/spfileXE.ora
System parameters with non-default values:
sessions = 180
memory_target = 1G
control_files = "/u01/app/oracle/oradata/XE/control.dbf"
compatible = "11.2.0.0.0"
db_recovery_file_dest = "/u01/app/oracle/fast_recovery_area"
db_recovery_file_dest_size= 20G
undo_management = "AUTO"
undo_tablespace = "UNDOTBS1"
remote_login_passwordfile= "EXCLUSIVE"
dispatchers = "(PROTOCOL=TCP) (SERVICE=XEXDB)"
shared_servers = 4
job_queue_processes = 4
audit_file_dest = "/u01/app/oracle/admin/XE/adump"
db_name = "XE"
open_cursors = 300
diagnostic_dest = "/u01/app/oracle"
Thu Sep 12 21:39:05 2013
PMON started with pid=2, OS id=2483
Thu Sep 12 21:39:05 2013
PSP0 started with pid=3, OS id=2489
Thu Sep 12 21:39:06 2013
VKTM started with pid=4, OS id=2546
VKTM running at (100ms) precision
Thu Sep 12 21:39:06 2013
GEN0 started with pid=5, OS id=2550
Thu Sep 12 21:39:06 2013
DIAG started with pid=6, OS id=2552
Thu Sep 12 21:39:06 2013
DBRM started with pid=7, OS id=2554
Thu Sep 12 21:39:06 2013
DIA0 started with pid=8, OS id=2556
And the tracefile:
Trace file /u01/app/oracle/diag/rdbms/xe/XE/trace/XE_ora_21440.trc
Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64bit Production
ORACLE_HOME = /u01/app/oracle/product/11.2.0/xe
System name: Linux
Node name: <blah>
Release: 2.6.32-358.14.1.el6.x86_64
Version: #1 SMP Tue Jul 16 23:51:20 UTC 2013
Machine: x86_64
Instance name: XE
Redo thread mounted by this instance: 1
Oracle process number: 24
Unix process pid: 21440, image: <blah>(TNS V1-V3)
*** 2013-09-12 21:26:25.858
*** SESSION ID:(62.3) 2013-09-12 21:26:25.858
*** CLIENT ID:() 2013-09-12 21:26:25.858
*** SERVICE NAME:() 2013-09-12 21:26:25.858
*** MODULE NAME:(<Blah> (TNS V1-V3)) 2013-09-12 21:26:25.858
*** ACTION NAME:() 2013-09-12 21:26:25.858
Thread 1 checkpoint: logseq 241, block 2, scn 8960531
cache-low rba: logseq 241, block 21190
on-disk rba: logseq 241, block 21377, scn 8979221
start recovery at logseq 241, block 21190, scn 0
*** 2013-09-12 21:26:25.869
Started writing zeroblks thread 1 seq 241 blocks 21377-21384
*** 2013-09-12 21:26:25.870
Completed writing zeroblks thread 1 seq 241
==== Redo read statistics for thread 1 ====
Total physical reads (from disk and memory): 4096Kb
-- Redo read_disk statistics --
Read rate (ASYNC): 93Kb in 0.01s => 9.13 Mb/sec
Longest record: 2Kb, moves: 0/242 (0%)
Change moves: 2/26 (7%), moved: 0Mb
Longest LWN: 8Kb, moves: 0/57 (0%), moved: 0Mb
Last redo scn: 0x0000.00890313 (8979219)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 262144
Longest hash chain = 1
Average hash chain = 34/34 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 377/542 = 0.7
*** 2013-09-12 21:26:25.872
KCRA: start recovery claims for 34 data blocks
*** 2013-09-12 21:26:25.873
KCRA: blocks processed = 34/34, claimed = 34, eliminated = 0
*** 2013-09-12 21:26:25.874
Recovery of Online Redo Log: Thread 1 Group 1 Seq 241 Reading mem 0
*** 2013-09-12 21:26:26.055
Exception [type: SIGBUS, Non-existent physical address] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8, _wordcopy_bwd_dest_aligned()+280] [flags: 0x0, count: 1]
Incident 22593 created, dump file: /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22593/XE_ora_21440_i22593.trc
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFF8] [PC:0x319A88A1B8] [Non-existent physical address] []
Incident 22594 created, dump file: /u01/app/oracle/diag/rdbms/xe/XE/incident/incdir_22594/XE_ora_21440_i22594.trc
ORA-07445: exception encountered: core dump [kcbs_dump_adv_state()+946] [SIGSEGV] [ADDR:0x7C7FD5E7FFEC] [PC:0x444FE70] [Address not mapped to object] []
ORA-07445: exception encountered: core dump [_wordcopy_bwd_dest_aligned()+280] [SIGBUS] [ADDR:0x76FFFFFHi Guys,
I have copied a backup script below that it turns out has been running every night at midnight. Where does this go, how do I know if it has worked and how can I use it to restore?
#!/bin/sh
# The script assumes that user can connect using "/ as sysdba" and Flash
# Recovery Area is enabled.
# =================
# Backup procedure
# =================
# For database in NoArchiveLog mode, database is shutdown and an offline
# backup is done;
# For database in Archive log mode, online backup is done.
# During the backup procedure, the script stores flash recovery area
# location by saving complete initialization parameter to
# ?/dbs/spfile2init.ora file. This will be used during restore operation
# to find Flash Recovery Area location. If this file is lost, then user must
# enter Flash Recovery Area location during restore operation.
# Two backups are maintained in Flash Recovery Area and the corresponding
# log files for last two backup job are saved in
# $HOME/oxe_backup_current.log and $HOME/oxe_backup_previous.log
user=`/usr/bin/whoami`
group=`/usr/bin/groups $user | grep dba`
if test -z "$group"; then
if [ -f /usr/bin/zenity ]
then
/usr/bin/zenity --error --text="$user must be in the DBA OS group to backup the database."
elif [ -f /usr/bin/kdialog ]
then
/usr/bin/kdialog --error "$user must be in the DBA OS group to backup the database."
elif [ -f /usr/bin/xterm ]
then
echo "Operation failed. $user must be in the DBA OS group to backup the database."
echo -n "Press any key to exit"
read userinp
fi
exit 0
fi
export ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe
export ORACLE_SID=XE
export PATH=$ORACLE_HOME/bin:$PATH
TMPDIR=/tmp
rman_normlog=${TMPDIR}/rman_normlog$$.log
#Fix a logfile for current, previous run and spfile2init.ora
sqlplus /nolog > $rman_normlog << EOF
connect / as sysdba;
set echo off;
set head off;
set serveroutput on;
set linesize 515;
declare
l1 varchar2(512);
begin
l1 := dbms_backup_restore.normalizeFilename('spfile2init.ora');
dbms_output.put_line('-----------------');
dbms_output.put_line(l1);
dbms_output.put_line('-----------------');
end;
EOF
rman_spfile2init=`grep "spfile2init.ora$" $rman_normlog`
rm -f $rman_normlog
rman_backup_current=$HOME/oxe_backup_current.log
rman_backup_prev=$HOME/oxe_backup_previous.log
#Choose a temporary log for this run
rman_backup=${TMPDIR}/rman_backup$$.log
echo XE Backup Log > $rman_backup
#Check if flash recovery area is enabled
rman_fra=${TMPDIR}/rman_fra$$.log
sqlplus /nolog > $rman_fra << EOF
connect / as sysdba;
set head off;
set echo off;
set trimspool on;
set linesize 512;
select '$' || count(*) || '$' from v\$parameter
where upper(name)='DB_RECOVERY_FILE_DEST'
and value is not null;
EOF
fra=`grep "^$.*$" $rman_fra`
rm -f $rman_fra
if [ X$fra = X\$1\$ ]; then
failed=false;
else
failed=true
errstr="flash recovery area is not enabled"
fi;
if [ $failed = 'false' ] ; then
#Check the mode of database
rman_log_mode=${TMPDIR}/rman_log_mode$$.log
sqlplus /nolog > $rman_log_mode << EOF
connect / as sysdba;
set head off;
set echo off;
set trimspool on;
set linesize 512;
select '$' || log_mode || '$' from v\$database;
EOF
mode=`grep "^$.*$" $rman_log_mode`
rm -f $rman_log_mode
case $mode in
\$ARCHIVELOG\$)
echo "Doing online backup of the database."
rman target / >> $rman_backup << EOF
set echo on;
configure retention policy to redundancy 2;
configure controlfile autobackup format for device type disk clear;
configure controlfile autobackup on;
sql "create pfile=''$rman_spfile2init'' from spfile";
backup as backupset device type disk database;
configure controlfile autobackup off;
delete noprompt obsolete;
EOF
if [ $? = 0 ]; then
failed=false;
else
failed=true
errstr="RMAN error: See log for details"
fi;
rman target / >> $rman_backup << EOF
sql 'alter system archive log current';
EOF
\$NOARCHIVELOG\$)
echo "Warning: Log archiving (ARCHIVELOG mode) is currently disabled. If"
echo "you restore the database from this backup, any transactions that take"
echo "place between this backup and the next backup will be lost. It is"
echo "recommended that you enable ARCHIVELOG mode before proceeding so "
echo "that all transactions can be recovered upon restore. See the section"
echo "'Enabling ARCHIVELOG Mode...' in the online help for instructions."
echo "Backup with log archiving disabled will shut down and restart the"
echo -n "database. Are you sure [Y/N]?"
gotit=false
while ! $gotit; do
read userinp
if [ "$userinp" = "Y" -o "$userinp" = "y" -o \
"$userinp" = "n" -o "$userinp" = "N" ]; then
gotit=true
fi
done
if [ "$userinp" = "n" -o "$userinp" = "N" ]; then
rm -f $rman_backup
exit -1;
fi
echo "Backup in progress..."
rman target / >> $rman_backup << EOF
set echo on;
shutdown immediate;
startup mount;
configure retention policy to redundancy 2;
configure controlfile autobackup format for device type disk clear;
configure controlfile autobackup on;
sql "create pfile=''$rman_spfile2init'' from spfile";
backup as backupset device type disk database;
configure controlfile autobackup off;
alter database open;
delete noprompt obsolete;
EOF
if [ $? = 0 ]; then
failed=false;
else
failed=true
errstr="RMAN error: See log for details"
fi;
errstr="Unknown database mode $mode"
failed=true;
esac;
fi;
#Save the error string in the log
if [ $failed = 'true' ]; then
echo ${errstr}. >> $rman_backup
fi;
#Save the last run as previous
if [ -f $rman_backup_current ]; then
mv -f $rman_backup_current $rman_backup_prev
fi;
#Save the current run
mv -f $rman_backup $rman_backup_current
#Display the result to user
if [ $failed = 'true' ] ; then
echo '==================== ERROR ========================='
echo ' Backup of the database failed '
echo '==================== ERROR ========================='
echo ${errstr}.
echo Log file is at $rman_backup_current.
else
echo Backup of the database succeeded.
echo Log file is at $rman_backup_current.
fi
#Wait for user to press any key
echo -n "Press ENTER key to exit"
read userinp -
I was directed to adobe to download CS4 on my new iMAC after hardware failure on PC. The valid CS4 serial number for the PC is now not recognized by Adobe, even though I downloaded all the software successfully on the new iMac.. They gave me a free 30 day trial on the new iMAC.........Does this mean I have to spend a lot of money to update and activate the latest CS release on the new machine ??????
Purple Lobster your Creative Suite 4 serial number is for Windows or Mac only. If you were previously using it on Windows then it is likely you have a Windows license. You can verify by checking your serial number at http://www.adobe.com/. You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
If you wish to run Adobe Creative software on your new iMac then I would recommend a Creative Cloud complete or single application membership. You can find more details at https://creative.adobe.com/plans. There is also a 30 day trial available for the Creative Cloud if you wish to evaluate the newest versions of the Adobe Creative applications. -
I suffered a hardware failure on my Dell desktop PC, and have moved to iMac. I own Adobe creative Suite 4 Design Premium for Windows. Can I transfer the license to my new iMAC without the huge expense of buying a new license or purchasing a month to month option?
you need a cross-grade, but adobe only offers free cross-grades for current releases, Order product | Platform, language swap
-
i have an hardware issue with my iphone 5 64gb. its lock button in not working. for a fact i know that it can be replaced but my question is this that do they require the bill or anything to replace or they only require the phone in usa
Warranty and support is only valid in the country of origin. The only exception being the EU where a device bought in any EU country can get warranty or service in any EU country.
Warranty is determined by device (serial number), no documentation required.
Apple does not repair devices, they replace them. For that reason, ensure the device is backed up and any pictures take with the device are copied off the device prior to going in for service. -
What is procedure to recover music after ipod hardware failure
My uncle's ipod had a hardware failure and died. Apple genius bar gave him an estimate for repair. But he has not repaired it yet. At that time, his music was still playable within iTunes. Then my uncle's tried to transfer music library to his daughter's PC. I do not know exactly what he did but, itunes produced a file called library.XML containing a list of his music titles along with the file paths to each item. At this point, all his music is not playable on his PC nor his daughers's PC. What was can be done with the Library.xml file? What is the purpose of library.xml. After iTunes generates library.xml, what should be done with it? My uncle wants to recover is music library. What should he do? Please help. Thank you.
columbus new boy wrote:
Hi,
Just got my new Macbook Pro, and I'm a little lost, I too don't understand how to post a new question even after reading your reply. Can you please help clarify it?
Thanks.
On the main Apple Discussions page, select MacBook Pro under Computing Hardware. There you'll find 12 individual forums each with a name and description, e.g.
Using your MacBook Pro (Late 2008 and 2009)
If your question doesn't fit in other categories.
Choose the forum where the description suits the type of question you want to ask. Just above the list of threads will be a link to *Post New Topic*, click this to proceed.
Use the subject line to give a concise description of your issue rather than something like "Help me!" as there are plenty of users who have experience with specific topics who will scan the subject lines and may ignore anything they don't immediately recognise as an area they can help with.
tt2 -
sir have this error so what can i do The SIM card that you currently have installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
It looks like the iPhone is locked to a carrier that is not the one you are trying to use.
You need to determine which carrier it is locked to and then contact them to see if they are willing to authorise the unlocking of your iPhone. As ManSinha mentioned, many carriers will only authorised the unlock if requested by the customer who had the contract with them for this iPhone.
Remember that only the carrier who owns the lock on your Iphone can authorise Apple to unlock the iPhone in their servers. You need to contact the carrier or have the previous owner of the iPhone request the unlocking. -
the SIM card that you currently have installed in this iPhone is form a carrier that is not supported under the activation policy that is currently assigned by the activation server.this is not a hardware issue with the iphon. please insert another SIM card from supported carrier or request that this iPhone be unlocked by your carrier.
Similar issue
here is the description
I have similar message but for me the Verizon guys said they unlocked it and when I actually connected to iTunes using Verizon sim card and then did the restore as new iphone then everything worked well and at the end i saw the message "Congrats, your iphone is now unlocked" and then I did the set up as new iphone for my kid.
Once new apple ID was set up, then I removed the verizon SIM and then inserted prepaid t-mobile sim card and after the phone booted up then I got the same message like above...."not supported"
What do i do now? I think the phone is unlocked right?
Also do I need to insert Verizon SIM card and do restore as NEW and this time do not set up the iphone but change the SIM card and then set up or ?
I am confused and other threads were talking that if you get congrats message then u shd be good to use other SIM cards....please help!!! -
The Sim card that you currently have installed in this iphone is from a carrier that is not supprotedunder the activation policy that is currently assigned by the activation server. this is not a hardware issue with the iphone. please insert another sim card from a supported carrier or request that this iphone be unlocked by your carrier.please contact apple for more information.
I have similar message but for me the Verizon guys said they unlocked it and when I actually connected to iTunes using Verizon sim card and then did the restore as new iphone then everything worked well and at the end i saw the message "Congrats, your iphone is now unlocked" and then I did the set up as new iphone for my kid.
Once new apple ID was set up, then I removed the verizon SIM and then inserted prepaid t-mobile sim card and after the phone booted up then I got the same message like above...."not supported"
What do i do now? I think the phone is unlocked right?
Also do I need to insert Verizon SIM card and do restore as NEW and this time do not set up the iphone but change the SIM card and then set up or ?
I am confused and other threads were talking that if you get congrats message then u shd be good to use other SIM cards....please help!!! -
Hardware Failure - Cannot login to Folio Builder
I was having problems with DPS App Builder - that problem was mysteriously solved.
Yesterday I had a catastrophic hardware failure when my MacBook Pro's screen died. I had to move my harddrive to a new MacBook Pro.
After moving my harddrive, I could no longer login to the Folio Builder Panel in Indesign CS6 (CC subscription). I decided to
deactivate, uninstall InDesign and reinstall, removing preferences, and ensuring that all updates had been applied. I have
done that I am still getting the message:
Sign In has failed. Network failure. Then after I hit OK, I get: Sign Out has failed. Network failure.
I can login to the Digital Publishing Suite Dashboard and the Digital Publishing Folio Producer, but I cannot
login to the Folio Buidler Panel. DPS App Builder continues to work without a problem.
It seems as if these tools are TOO TOUCHY which leads to a lot of wasted time.
What's going on?Try This:
Quit InDesign and any other CS apps.
Use the Activity Monitor to quit the CS5ServiceManager or CS5.5Service Manager.
Next delete this file based on version: (Back up the file just in case.)
Note:
For example:
/Users/"your user name"/Library/Application Support/Adobe/CS5ServiceManager/preference/csxs2.pref
/Users/"your user name"/Library/Application Support/Adobe/CS5.5ServiceManager/preference/csxs2.pref
Then remove this item from the Keychain Access based on version: Adobe CS5 renga or Adobe CS5.5 renga.
To remove from the keychain, navigate to: /Applications/Utilities and launch the Keychain Access.app
If the lock icon in the upper left appears locked, click it and enter your password to unlock it.
Select the “login” item in the Keychains list in the upper left.
Select “Passwords” from the category list.
Type “renga” in the search field in the upper right.
Lastly, select any matches and press the Delete key.
Maybe you are looking for
-
Report for Invoice amt, Tax and Payments
Dear All, I need to take out the report of Vendor, in which I can get following information. Inv No InvValue(Booked) S.Tax. ECess HECess Chq No date Bank How to take out this report? Regards,
-
Pan & Zoom (glitch) requires a tap to work.
I have an image set up to pan & zoom. You can't just start pinching to zoom and move around, you have to tap the image then wait a second, then you can move it around or zoom in. Anyone have any ideas how to make this work without havig to tap? It do
-
Awful broadband speed, line noise + disconnecting ...
We're experiencing very slow internet speed, as well as noise on our phone line, to the point where we can hear voices in addition to static etc. Our BB speed fluctuated from a decent IP Profile to a bad one (<500kb) and I can only assume that the no
-
After Mountain Lion my fans keep running - why?
After loading Mountain Lion, my iMac 20-inch, Early 2009, like very many people I have read on the blogs, I found it had it's fans running full speed quite regularly after I put it to Sleep. Many blogs hoped the 10.8.1 update would sort it. It hasn't
-
Slow Boot On W520 Troubleshoot
Hey everybody! My Name is Markus and I'm the owner of a W520-4282W17 with 8GB of RAM (Samsung 1333Mhz) and BIOS ver. 1.33. As many of the users in the community claimed that their system is starting very slow when using a HDD I also have to commit th