Hardware for Flash Presentations/Kiosks?
Hi folks,
Just wondering if anyone has an overview of what Flash uses
regarding system resources. Does it rely more on system memory than
graphics card memory? Does having dedicated graphics memory even
help? Is it more CPU or GPU intensive? I sure it depends on what
you're doing
with Flash, so let's assume high quality Kiosk/Presentation
type things, rather than action games. High on the pretty pretty
and low on audio/interactivity. How does adding bitmaps or FLV into
the picture change things?
Any thoughts would be much appreciated, as we're about to buy
our next generation of trade show laptops. Basically I want to know
if I should invest more in memroy, CPU, or dedicated graphics...
Thanks,
SyddyS
SyddyS wrote:
> Thanks for the thoughts... I'll leave this thread as
unanswered for the time
> being in case anyone else wants to weigh in with an
opposing viewpoint (nothing
> like a good controversy). I've also cross posted this in
the Creative Cow
> Flash forum, but no response there yet. If anything of
interest crops up
> there, I'll post a link here.
>
> Thanks again,
> SyddyS
Afraid there is not much controversy to it :)
Flash is pretty limited and well exposed with all its flows
in past many years.
My specialty is off line content, have been doing it for over
a decade, CD, DVD,
kiosk and devices.
And it work exactly as the other two guys explain.
I could only add that is good to split content into multiple
files so you don't load
one large file with all of it at once. If you have 20 sound
tracks, keep them as mp3
and load them when needed. If you have video, FLV, do not go
to big on the screen with it.
Over all, regardless how optimize is the player 9, the bigger
animation covering larger
screen and the more happening on the screen in the same time,
the more CPU it takes.
Director sometimes could be much better choice if you work is
video and bitmaps heavy.
Hardware, anything new but not top notch will be. As long as
you don't have too many
things going on, an average cpu will handle your flash very
well.
Best Regards
Urami
"Never play Leap-Frog with a Unicorn."
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami>
Similar Messages
-
Preloader for flash presentations?
Hi all,
I need (badly) to add a preloader to a flash presentation.
But googling around I didn't found a solution to this.
I can't believe that you can't do this in an easy way.
I can't re-create the slide presentation from scratch using the flash timeline (it would take ages).
Is there a solution to this?
TIA
tonySee if this helps...
http://www.gotoandlearn.com/play.php?id=85 -
Color management for flash player with hardware acceleration
I have tested the color management for flash player 10.2 with and without hardware acceleration (GPU) on different PCs with different video cards.
Videos that are played via flash without hardware acceleration on PC have proper color as designed in After Effects.
When I switch on hardware acceleration, the color shifts, for example green becomes lighter, although grey values are OK. I have tried this by writing a small Flash programme for playing a movie; I wrote two programmes one with color management as described in the article "Color correction in Flash Player" http://www.adobe.com/devnet/flash/quickstart/color_correction_as3.html and another one without color management. In both cases I got the same color shift when hardware acceleration was turned on. From the result I concluded that color management does not work when hardware acceleration is on.
My question is: are there any plans to have color management for flash player with hardware acceleration (GPU) in the near future?
We need to play complex high definition movies streaming through a high speed local area network that need hardware acceleration to avoid stuttering.
V. S.Hi, LOL at my screen moniker. That's interesting that the FF beta has an Option for that. The only problem, is that I have heard that each browser must UNcheck the H.A. I'm sure you'll find out.
Hope that works at least for FF. Let me know if you have time.
I've been checking out Apple TV and Google TV. Just saved the links and some info, haven't had time to go further. I'd prefer Apple TV over Google tho.
I have a 55" HD Sony/Blu-ray Surround Sound Speakers, etc. I hooked up the VGA cable for Internet, and WOW on the Screen/Monitor!! Now I'm thinking about the iPhone 4 with VZ too, on their pre-order list for 2/3/11!
Hard to keep up with the Technology, moving faster today for some reason.
We are under the Snow & Ice warning, getting it now. Hope I don't lose power! If so, I'll be offline for sure.
If I find anything on that H.A. for IE, I'll let you know.
Thanks,
eidnolb -
Adobe Suggests Disabled Hardware Acceleration for Flash Player in OS X Lion
http://www.macrumors.com/2011/07/21/adobe-suggests-disabled-hardware-acceleratio n-for-flash-player-in-os-x-lion/
I've seen in some discussions that Adobe CS5 programs arent working either and that a Java update will make them work. Anyone know if this will do the same for Adobe Flash Player?
http://support.apple.com/kb/DL1421 -
The flash light in the phone is only working while using camera. But i want the flash separately when i'm needed. So i searched for the app. But unfortunately there is no app for operating flash light separately. So please help me.
Try searching just for '''flash'''
https://marketplace.firefox.com/search?q=flash -
Student needing URGENT help with flash presentation...
I am working on a flash presentation with galleries buttons ...basically the full lot. The presentation brief is for a Kiosk - computer in a museum, which when its not being used will go onto a screensaver.
So my question is ...after ive done the screensaver, how to i actually get it into my main presentation? I've looked ALL over the internet for tutorials and found nothing. Any help that anyone can give will be great -
MY HAND IN ON FRIDAY .......
Thanks xDeexpresumably there will be some user input (like a screen touch) that will trigger your presentation's start. you will create a listener for that input and when detected stop/remove your screensaver and start/add your presentation.
typically you would use a timer of some sort to detect a lack of user activity for some minimum duration that would trigger your presentation to stop and the screensaver to be re-started. -
Hi! I need help, today I connected my mac Book Air to a tv for a presentation and as soon as I conected it the image on my screen went bigger. And I cant find the way to put it back as it was before. The Images are too big! heelp
Morning DeeHutton,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Best of luck,
Mario -
"the activex control for flash player could not be registered" - Solutions Roundup
I recently ran into this problem on my computer:
http://at32.s3.amazonaws.com/flash_install_problems2.jpg
I am a Flash developer (as in I write SWFs, I don't work for Adobe). and when I updated IE to 10.2, "the activex control for flash player could not be registered". Since I am a developer, I also have Firefox and Chrome installed, with Flash running without problems. For a long time now, Internet Explorer has used a different version (ActiveX) to the other browsers, which use plugins. I am a strong supporter of Flash, it's great to develop with and has a very wide feature set which is growing all the time, unlike fixed technologies/standards. However, the weakest part is the install process - I don't understand why their is a Download Manager. Google Chrome does it's best (so far) by managing the install/update process entirely in the background. Anyway, it was in my best interest to try and get to the bottom of this.
For the record, on the problem machine I have Windows 7 with IE8, but I have seen almost identical symptoms with IE9, Windows XP SP3, as well as various iterations of Flash Player (10.0, 10.1, 10.2 and even some final editions of version 9).
First I tried the standard support here:
http://kb2.adobe.com/cps/191/tn_19166.html
Basically, doing the manual uninstall and manual install of the latest version (without using the download manager, or have IE open). This did not work. I also tried the Microsoft "subinacl" program, together with "reset_fp10.bat". This didn't work either. However, you should try all of these things first before progressing further.
A quick note about people who had tried running the following at a command prompt: "secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose"
I didn't do this, because on investigating further it didn't seem to work with Windows 7, only Windows XP, Windows 2000 or Windows 2003 - though there was a few threads where this had fixed the problem for some users.
For my solution, it is recommended you use the manual uninstall / installers, so you should have them downloaded ready to use.
I then heard about problems with permissions in the registry with the key: HKEY_LOCAL_MACHINE\Software\Classes\shockwaveflash.shockwave
So I opened regedit.exe (start - run - typed "regedit.exe"), navigated to the key and sure enough, I couldn't open it - permission denied - even though I had an administrator account. If for some reason, you can access this key (and any subkeys), then it's likely the following fix will not resolve the problem.
I then done further diagnosis, by using Process Monitor to try and install Flash Player, and I got the following:
http://at32.s3.amazonaws.com/flash_install_problems.gif
This shows all the access denied errors the Flash Player install was experiencing when trying to write to the registry key. This confirmed that this was the problem. I only stress this because several people said it was unwise to tinker with the registry. Though this is common advice, this is the only known fix for this precise problem at present, since you need to manually adjust the permissions yourself. I don't know who is at fault here - Microsoft or Adobe - but let's just get Flash fixed...
The solution:
Firstly, you may want to backup your registry, or the exact key. I didn't do this so I've provided no instructions on how to, but it is recommended for the paranoid. Also make sure as much software is closed down as possible - browsers, IM software, any junk in your system tray. As way of example, I happened to have "BBC iPlayer" installed and running in the background which uses Adobe AIR and Flash Player, so I exited that too.
1) Open regedit (start - run - type "regedit.exe"). You may need to right click on it and select "Run As Administrator", but I didn't as my account was already administrator.
2) Navigate to the key. HKEY_LOCAL_MACHINE\Software\Classes\shockwaveflash.shockwave
Click on it to confirm that you cannot access it (you will get an error) - if their are no problems - this probably isn't the cause of your issues.
3) Right click on it and click Permissions, and ignore any message that may pop up.
4) Under "Group or Usernames" click "Add". Type your account name name, or "Administrators" in the box, then "Check Names" to format it correctly, then Ok.
5) Now on the next screen click the checkbox to enable Full Control (this will also automatically enable "Read" permission too).
6) Click Advanced, then the "Owner" tab at the top. You will see that their is no "Current Owner". This is what we will now fix.
7) Click on your name to change the owner to (I went for Administrators). Also enable the checkbox entitled "Replace Owner on subcontainers and objects". Then click Ok. You will get an error message, which you can try clicking Retry to, but hit Cancel - this is not a problem.
8) Click Ok a couple of times and this part of your registry is now fixed.
9) Now it's a simple case of running the manual Flash uninstall program, then finally the manual Flash installer (for Active X - not the Firefox/Chrome plugin versions). To my surprise, after a couple of days looking into this - I finally had a solution and Flash in IE once more. If you are using Firefox too you may find Flash is no longer installed their (the uninstaller removed it). In this case just install via the Adobe site or try to watch a video on You Tube and you will be prompted or linked to the install.
Hope this provides a good round up of the possible solutions to this problem. Hopefully Microsoft or Adobe can find out what causes this issue in the first place so we don't have to go down this route for much longer. Chrome's implementation of Flash shows how effortlessly things can work!They will stay on the screen. However, Process Monitor is only intended for advanced users. It is recommended that users try to navigate to the troublesome registry key using regedit, and see if they can access it or not without an error. This is far easier than trying to use Process Monitor, which is very complicated.
I used Process Monitor to confirm that it was just that key which was causing the problem, and not others. Process Monitor is not to be confused with the new Resource Monitor which is accessible via Task Manager in Windows 7 (and possibly Vista). If you must experiment (and Process Monitor is very useful for diagnosing many deep-level problems if you know what you're looking for) Process Monitor can be downloaded from here:
http://technet.microsoft.com/en-us/sysinternals/bb896645
It replaces the older Sysinternals "FileMon" and "RegMon". For those interested in the technical side, I had to setup a number of filters to be able to get the results display as in the screenshot. First of all to just show Registry events. Then to just show events from the manual Flash activeX installer executable. The I added a filter to show only non-successfull results. And finally, for the purposes of the screenshot, added a filter to just show those with "Access Denied", since other non-critical errors are also picked up due to missing keys because installation has not yet been fully completed I guess. When experimenting, most of these filters were applied using the "is not" boolean logic, which will make sense if you experiment with the program.
Without adding any filters, it picks up so many events (hundreds per second) that it's otherwise unusable. e.g. 40,000 events within the first few seconds of opening the program. For this reason, I recommend simply using Regedit to diagnose the problem with the particular Flash registry key. -
A workaround was suggested by a member of the community to turn off both hardware and Flash acceleration. It worked fine (no crashes since), but runs very slowly. In particular, takes five seconds to exit and is often still listed as a running process. Very slow in connecting to Web pages, and very slow loading them because of the graphics. Very slow in loading video. I expected slower responses, but this is REALLY slow. I'm running 64-bit Windows 7 and an Nvidia GE Force 7800 graphics card with all the drivers updated and the plugins for Firefox mostly set on "ask to activate". Should I expect this much reduction in performance when the workaround I mentioned was put into place? If so, it's half a loaf at best. The only thing questionable is that I have two Youtube downloaders that I am trying, but I made the assumption that these were only applied when you downloaded something from Youtube.
In case you are using "Clear history when Firefox closes": do not clear the Cookies
If you clear cookies then Firefox will also try to remove cookies created by plugins and that requires to start plugin-container processes that can slow down closing Firefox.
Instead let the cookies expire when Firefox is closed to make them session cookies.
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: Keep until: "I close Firefox" -
Possible to Stream a Flash Presentation?
Hi all! I work for a university and we have some faculty that
are creating some huge flash presentations. I know that flash is
remarkably fast when it comes to downloading, but with these large
presentations it's still taking some time. Is it possible to
stream a flash presentation? Compress the audio? Any other
ideas?Never seen TGotoFrame, but there is GotoFrame() and Play(),
which has worked
well for me. Here's a function I've used to change videos in
a Flash movie
from image buttons in the HTML:
<SCRIPT LANGUAGE="JavaScript">
function changeVideo(xname){
if(window.brtv){
window.document["brtv"].SetVariable("theXML", xname);
window.document["brtv"].GotoFrame(0);
window.document["brtv"].Play();
if(document.brtv){
document.brtv.SetVariable("theXML", xname);
document.brtv.GotoFrame(0);
document.brtv.Play();
//-->
</SCRIPT>
Where brtv is the name of the div containing the movie.
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/ -
Anyone familiar with Flash Presentations?
Hi.
I continue to have problems playing movieclips on certain
slides of a Flash Presentation.
If anyone has *reasonable* experience with Flash
presentations please let me know. You might be familiar with the
problem, or have suggestions.
Thanks in advance,
Kchez Lou,
> 1. Would I be better off just placing everything on the
main
> timeline, and saving the use of mc for animations that
can play
> continously (for instance animations that "accent" the
content
> of the slide, vs those used to put the content
together)?
Well, that would certainly be one approach, but then you
lose out on the
benefit of nested movie clips, not the least of which is
avoidance of
timeline sprawl. I played a bit more with the Slide API this
morning. I
can see what's going on. Under the hood, each slide is a
movie clip, and
they all exist at once, so if you have nested animation on
any slide ...
they all start playing even on slide 1, and might in fact
have played
through by the time you hit slide 5.
> 2. Do you know of a way to have an animation stop on the
last
> frame, yet replay on slide re-entry?
Here's what I came up with. Let's assume you have two
buttons on the
root presentation slide. By default, Flash gives you a root
slide named
"presentation" and a child slide named "slide1". In my
experiment, I added
a Next and Previous button to "presentation" and wired them
up like this:
btnNext.onRelease = function():Void {
this._parent.currentSlide.gotoNextSlide();
btnPrev.onRelease = function():Void {
this._parent.currentSlide.gotoPreviousSlide();
This uses the button event handling approach I prefer,
personally, over
on() and onClipEvent() -- I'm not sure which approach you're
using. In this
approach, the code codes into a keyframe, typically a
dedicated scripts
layer, rather than attached to the object itself. The buttons
have the
instance names btnNext and btnPrev. A function is assigned to
the
Button.onRelease event of each button instance, and the
functions call
either Slide.gotoNextSlide() or Slide.gotoPreviousSlide() as
appropriate.
In order to target the relevant Slide instance, I use the
Slide.currentSlide
property, which I reference via the expression this._parent.
Let me explain that, real quick. In the above code, the word
"this"
refers to the corresponding button instance itself -- in
btnNext's onRelease
handler, "this" refers to btnNext. btnNext -- the button
symbol -- is, by
nature, an instance of the Button class. Consulting the
Button class in the
ActionScript 2.0 Language Reference, I see that all button
instances have a
Button._parent property, which points to the object that
contains the
button. Cool. Therefore, from a button's point of view,
this._parent
refers to the timeline that contains the button. Normally,
such a reference
points to a MovieClip instance (which is what timelines are;
they're movie
clips). That's the case here, too, but thanks to the way
object-oriented
programming works, and because we're inside a Slide
presentation, the parent
movie clip of this button is also an instance of the Slide
class.
Look up "Slide class" in the Components Language Reference,
and you'll
see the full pedigree. Any instance of Slide has the
following family tree:
MovieClip > UIObject > UIComponent > View >
Loader > Screen > Slide. Slides
*are* movie clips, but they're more than that. They're also
UIObjects,
which are objects that contain all the functionality of movie
clips, and
then some. They're also UIComponents, which addes even more
functionality,
and so on ... all the way through Slide. One of the
properties of the Slide
class is Slide.currentSlide. Bingo!
So ... this._parent (in this context) refers to a Slide
instance, which
means this._parent.currentSlide refers to the currently
showing slide, which
is obviously also a Slide instance. For that reason, we can
still invoke
Slide class methods on the reference, which is why something
like
this._parent.currentSlide.gotoNextSlide() works.
Forgive me, by the way, if you already understand all of
this. Forum
replies are searchable, and who knows ... in the future, the
explanation has
the potential to help someone else, too. :)
Okay, so now the issue is, we want each current slide to run
through any
nested movie clips it may have, regardless of their instance
names, and tell
each movie clip to start again from frame 1 of its own
timeline. Amend the
above code to look like this:
import mx.screens.Slide;
btnNext.onRelease = function():Void {
this._parent.currentSlide.gotoNextSlide();
var slide:Slide = this._parent.currentSlide;
for (var prop:String in slide) {
if (typeof(slide[prop] == "movieclip")) {
slide[prop].gotoAndPlay(1);
btnPrev.onRelease = function():Void {
this._parent.currentSlide.gotoPreviousSlide();
var slide:Slide = this._parent.currentSlide;
for (var prop:String in slide) {
if (typeof(slide[prop] == "movieclip")) {
slide[prop].gotoAndPlay(1);
The import statement allows us to reference Slide as a
datatype, which
happens just below the line in each event handler that was
already there.
To save a few keystrokes (basically, to make the code easier
to read), we're
creating a temporary variable, slide, and setting it to the
same
this._parent.currentSlide expression we already used. Once
gotoNextSlide()
or gotoPreviousSlide() is called, the value of
this._parent.currentSlide
changes, because now a *new* slide is the current slide. It's
the new slide
we're interested in. Using the variable slide as a kind of
shorthand, we
use a for..in loop to run through all the properties of the
current slide.
If the datatype of a given propery is a movie clip, we tell
it to go to
frame 1 of its own timeline and start playing.
What I've spelled out may or may not fit, exactly, with your
current
circumstance, but that's why I spent a bit of time explaining
the mechanics
of it. I hope that steers you in a useful direction. :)
David Stiller
Co-author, Foundation Flash CS3 for Designers
http://tinyurl.com/2k29mj
"Luck is the residue of good design." -
External .swf into a flash presentation
Hey guys and girls!
I got a question here. I made a small flash intro 2 weeks ago
and saved it into a .swf. Now I am doing a flash presentation with
many slides for a client and I want to put the intro into the first
slide. I am doing a symbol/movie clip and after the movie is
loaded, it does not switch slides...
Thanks a lot,
AntoineI think this is what you're looking for...
stop();
waitI=setInterval(waitF,5000); // <- will wait for 5000
milliseconds
function waitF(){
clearInterval(waitI);
_root.gotoAndPlay("specificFrameLabel");
could be completely wrong though. -
WS-C2960X-48LPS-L - "Hardware is not present"
I have a 2960 stack with 3 switch members. If I show an interface summary I can see al switches, but none of the ports on the 3rd switch show active. If I do a show interface on any of those interfaces I see "Hardware is not present."
Another weird thing I noticed is even if I shutdown a port the user does not lose link.
What could be causing this error?
Here are the show interface summary and the show interface of a specific interface:
*: interface is up
IHQ: pkts in input hold queue IQD: pkts dropped from input queue
OHQ: pkts in output hold queue OQD: pkts dropped from output queue
RXBS: rx rate (bits/sec) RXPS: rx rate (pkts/sec)
TXBS: tx rate (bits/sec) TXPS: tx rate (pkts/sec)
TRTL: throttle count
Interface IHQ IQD OHQ OQD RXBS RXPS TXBS TXPS TRTL
Vlan1 0 0 0 0 0 0 0 0 0
* Vlan109 0 0 0 0 2000 3 0 0 0
FastEthernet0 0 0 0 0 0 0 0 0 0
* GigabitEthernet1/0/1 0 0 0 119248075 0 0 1779000 164 0
GigabitEthernet1/0/2 0 0 0 0 0 0 0 0 0
* GigabitEthernet1/0/3 0 0 0 3936 0 0 2000 2 0
GigabitEthernet1/0/4 0 0 0 0 0 0 0 0 0
* GigabitEthernet1/0/5 0 0 0 0 0 0 3000 3 0
* GigabitEthernet1/0/6 0 0 0 4092 0 0 95000 5 0
* GigabitEthernet1/0/7 0 0 0 0 2004000 181 2000 2 0
* GigabitEthernet1/0/8 0 0 0 1280 0 0 3000 3 0
GigabitEthernet1/0/9 0 0 0 2431 0 0 0 0 0
* GigabitEthernet1/0/10 0 0 0 3836 0 0 2000 2 0
* GigabitEthernet1/0/11 0 0 0 3301 0 0 2000 2 0
* GigabitEthernet1/0/12 0 0 0 0 0 0 2000 2 0
GigabitEthernet1/0/13 0 0 0 0 0 0 0 0 0
* GigabitEthernet1/0/14 0 0 0 3125 0 0 2000 2 0
* GigabitEthernet1/0/15 0 0 0 0 0 0 2000 2 0
GigabitEthernet1/0/16 0 0 0 0 0 0 0 0 0
* GigabitEthernet1/0/17 0 0 0 732 0 0 3000 4 0
GigabitEthernet1/0/18 0 0 0 8064 0 0 0 0 0
GigabitEthernet1/0/19 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/20 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/21 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/22 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/23 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/24 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/25 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/26 0 0 0 492 0 0 0 0 0
* GigabitEthernet1/0/27 0 0 0 0 0 0 2000 2 0
* GigabitEthernet1/0/28 0 0 0 183 0 0 2000 2 0
* GigabitEthernet1/0/29 0 0 0 361 0 0 2000 2 0
GigabitEthernet1/0/30 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/31 0 0 0 0 0 0 0 0 0
* GigabitEthernet1/0/32 0 0 0 119249539 0 0 1779000 164 0
* GigabitEthernet1/0/33 0 0 0 183 0 0 2000 2 0
* GigabitEthernet1/0/34 0 0 0 183 0 0 2000 2 0
* GigabitEthernet1/0/35 0 0 0 0 0 0 11000 2 0
GigabitEthernet1/0/36 0 0 0 0 0 0 0 0 0
* GigabitEthernet1/0/37 0 0 0 0 0 0 13000 3 0
GigabitEthernet1/0/38 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/39 0 0 0 0 0 0 0 0 0
* GigabitEthernet1/0/40 0 0 0 0 17000 1 134000 3 0
* GigabitEthernet1/0/41 0 0 0 0 0 0 6000 2 0
GigabitEthernet1/0/42 0 0 0 0 0 0 0 0 0
* GigabitEthernet1/0/43 0 0 0 1040 0 0 2000 2 0
GigabitEthernet1/0/44 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/45 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/46 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/47 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/48 0 0 0 0 0 0 0 0 0
* GigabitEthernet1/0/49 0 0 0 6001 2761000 360 3141000 293 0
GigabitEthernet1/0/50 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/51 0 0 0 0 0 0 0 0 0
GigabitEthernet1/0/52 0 0 0 0 0 0 0 0 0
* GigabitEthernet2/0/1 0 0 0 0 0 0 5000 5 0
GigabitEthernet2/0/2 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/3 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/4 0 0 0 0 0 0 0 0 0
Interface IHQ IQD OHQ OQD RXBS RXPS TXBS TXPS TRTL
GigabitEthernet2/0/5 0 0 0 0 0 0 0 0 0
* GigabitEthernet2/0/6 0 0 0 0 0 0 0 0 0
* GigabitEthernet2/0/7 0 0 0 787 0 0 4000 3 0
* GigabitEthernet2/0/8 0 0 0 1469 0 0 4000 3 0
* GigabitEthernet2/0/9 0 0 0 1993 6000 0 1994000 177 0
* GigabitEthernet2/0/10 0 0 0 9937743 0 0 1984000 177 0
GigabitEthernet2/0/11 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/12 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/13 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/14 0 0 0 0 0 0 0 0 0
* GigabitEthernet2/0/15 0 0 0 6069 6000 7 21000 17 0
* GigabitEthernet2/0/16 0 0 0 6839 0 0 3000 4 0
* GigabitEthernet2/0/17 0 0 0 7440 0 0 3000 3 0
GigabitEthernet2/0/18 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/19 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/20 0 0 0 0 0 0 0 0 0
* GigabitEthernet2/0/21 0 0 0 520208296 13000 5 913000 72 0
* GigabitEthernet2/0/22 0 0 0 11554 6000 1 2006000 177 0
GigabitEthernet2/0/23 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/24 0 0 0 0 0 0 0 0 0
* GigabitEthernet2/0/25 0 0 0 119263963 0 0 1776000 173 0
GigabitEthernet2/0/26 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/27 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/28 0 0 0 0 0 0 0 0 0
* GigabitEthernet2/0/29 0 0 0 119265197 0 0 1776000 174 0
GigabitEthernet2/0/30 0 0 0 0 0 0 0 0 0
* GigabitEthernet2/0/31 0 0 0 119267751 0 0 1776000 174 0
GigabitEthernet2/0/32 0 0 0 0 0 0 0 0 0
* GigabitEthernet2/0/33 0 0 0 124159925 0 0 1776000 177 0
* GigabitEthernet2/0/34 0 0 0 119275495 0 0 1776000 174 0
* GigabitEthernet2/0/35 0 0 0 120891009 15327000 1284 2090000 790 0
* GigabitEthernet2/0/36 0 0 0 0 0 0 4000 4 0
GigabitEthernet2/0/37 0 0 0 0 0 0 0 0 0
* GigabitEthernet2/0/38 0 0 0 115475837 857000 75 1777000 189 0
GigabitEthernet2/0/39 0 0 0 0 0 0 0 0 0
* GigabitEthernet2/0/40 0 0 0 115383388 1087000 118 1778000 207 0
GigabitEthernet2/0/41 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/42 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/43 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/44 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/45 0 0 0 0 0 0 0 0 0
* GigabitEthernet2/0/46 0 0 0 0 0 0 498000 26 0
* GigabitEthernet2/0/47 0 0 0 0 0 0 497000 26 0
* GigabitEthernet2/0/48 0 0 0 0 0 0 498000 27 0
* GigabitEthernet2/0/49 0 0 0 24176 670000 750 16320000 1403 0
GigabitEthernet2/0/50 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/51 0 0 0 0 0 0 0 0 0
GigabitEthernet2/0/52 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/1 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/2 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/3 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/4 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/5 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/6 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/7 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/8 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/9 0 0 0 1973 0 0 0 0 0
GigabitEthernet3/0/10 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/11 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/12 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/13 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/14 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/15 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/16 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/17 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/18 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/19 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/20 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/21 0 0 0 0 0 0 0 0 0
Interface IHQ IQD OHQ OQD RXBS RXPS TXBS TXPS TRTL
GigabitEthernet3/0/22 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/23 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/24 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/25 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/26 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/27 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/28 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/29 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/30 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/31 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/32 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/33 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/34 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/35 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/36 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/37 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/38 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/39 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/40 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/41 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/42 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/43 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/44 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/45 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/46 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/47 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/48 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/49 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/50 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/51 0 0 0 0 0 0 0 0 0
GigabitEthernet3/0/52 0 0 0 0 0 0 0 0 0
* Port-channel2 0 0 0 30177 2651000 969 17427000 1505 0
GigabitEthernet3/0/1 is down, line protocol is down (notconnect)
Hardware is not present
Hardware is Gigabit Ethernet, address is c07b.bc8c.a081 (bia c07b.bc8c.a081)
Description: 97 Cisco 1602i YNZ-CAPN19
MTU 1500 bytes, BW 1000000 Kbit/sec, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
ARP type: ARPA, ARP Timeout 04:00:00
Last input 1d23h, output 1d23h, output hang never
Last clearing of "show interface" counters 8w3d
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
3700185 packets input, 1023306697 bytes, 0 no buffer
Received 341061 broadcasts (252802 multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 252802 multicast, 0 pause input
0 input packets with dribble condition detected
13989985 packets output, 1491823128 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 unknown protocol drops
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped outThe show switch detail looks like it shows the problem. The part I don't understand is how my clients are getting connected, getting an address from DHCP (Microsoft, not local), and is pingable from the switch.
I have checked the stacking cables and they seem firmly installed and I have a reload planned for lunchtime.
sh ip int br:
Interface IP-Address OK? Method Status Protocol
Vlan1 unassigned YES NVRAM administratively down down
Vlan109 10.93.109.248 YES NVRAM up up
FastEthernet0 unassigned YES NVRAM down down
GigabitEthernet1/0/1 unassigned YES unset up up
GigabitEthernet1/0/2 unassigned YES unset down down
GigabitEthernet1/0/3 unassigned YES unset up up
GigabitEthernet1/0/4 unassigned YES unset down down
GigabitEthernet1/0/5 unassigned YES unset up up
GigabitEthernet1/0/6 unassigned YES unset up up
GigabitEthernet1/0/7 unassigned YES unset up up
GigabitEthernet1/0/8 unassigned YES unset up up
GigabitEthernet1/0/9 unassigned YES unset down down
GigabitEthernet1/0/10 unassigned YES unset up up
GigabitEthernet1/0/11 unassigned YES unset up up
GigabitEthernet1/0/12 unassigned YES unset up up
GigabitEthernet1/0/13 unassigned YES unset down down
GigabitEthernet1/0/14 unassigned YES unset up up
GigabitEthernet1/0/15 unassigned YES unset up up
GigabitEthernet1/0/16 unassigned YES unset down down
GigabitEthernet1/0/17 unassigned YES unset up up
GigabitEthernet1/0/18 unassigned YES unset down down
GigabitEthernet1/0/19 unassigned YES unset down down
GigabitEthernet1/0/20 unassigned YES unset down down
GigabitEthernet1/0/21 unassigned YES unset down down
GigabitEthernet1/0/22 unassigned YES unset down down
GigabitEthernet1/0/23 unassigned YES unset down down
GigabitEthernet1/0/24 unassigned YES unset down down
GigabitEthernet1/0/25 unassigned YES unset down down
GigabitEthernet1/0/26 unassigned YES unset down down
GigabitEthernet1/0/27 unassigned YES unset up up
GigabitEthernet1/0/28 unassigned YES unset up up
GigabitEthernet1/0/29 unassigned YES unset up up
GigabitEthernet1/0/30 unassigned YES unset down down
GigabitEthernet1/0/31 unassigned YES unset down down
GigabitEthernet1/0/32 unassigned YES unset up up
GigabitEthernet1/0/33 unassigned YES unset up up
GigabitEthernet1/0/34 unassigned YES unset up up
GigabitEthernet1/0/35 unassigned YES unset up up
GigabitEthernet1/0/36 unassigned YES unset down down
GigabitEthernet1/0/37 unassigned YES unset up up
GigabitEthernet1/0/38 unassigned YES unset down down
GigabitEthernet1/0/39 unassigned YES unset down down
GigabitEthernet1/0/40 unassigned YES unset up up
GigabitEthernet1/0/41 unassigned YES unset up up
GigabitEthernet1/0/42 unassigned YES unset down down
GigabitEthernet1/0/43 unassigned YES unset up up
GigabitEthernet1/0/44 unassigned YES unset down down
GigabitEthernet1/0/45 unassigned YES unset down down
GigabitEthernet1/0/46 unassigned YES unset down down
GigabitEthernet1/0/47 unassigned YES unset down down
GigabitEthernet1/0/48 unassigned YES unset down down
GigabitEthernet1/0/49 unassigned YES unset up up
GigabitEthernet1/0/50 unassigned YES unset down down
GigabitEthernet1/0/51 unassigned YES unset down down
GigabitEthernet1/0/52 unassigned YES unset down down
GigabitEthernet2/0/1 unassigned YES unset up up
GigabitEthernet2/0/2 unassigned YES unset down down
GigabitEthernet2/0/3 unassigned YES unset down down
GigabitEthernet2/0/4 unassigned YES unset down down
GigabitEthernet2/0/5 unassigned YES unset down down
GigabitEthernet2/0/6 unassigned YES unset up up
GigabitEthernet2/0/7 unassigned YES unset up up
GigabitEthernet2/0/8 unassigned YES unset up up
GigabitEthernet2/0/9 unassigned YES unset up up
GigabitEthernet2/0/10 unassigned YES unset up up
GigabitEthernet2/0/11 unassigned YES unset down down
GigabitEthernet2/0/12 unassigned YES unset down down
GigabitEthernet2/0/13 unassigned YES unset down down
GigabitEthernet2/0/14 unassigned YES unset down down
GigabitEthernet2/0/15 unassigned YES unset up up
GigabitEthernet2/0/16 unassigned YES unset up up
GigabitEthernet2/0/17 unassigned YES unset up up
GigabitEthernet2/0/18 unassigned YES unset down down
GigabitEthernet2/0/19 unassigned YES unset down down
GigabitEthernet2/0/20 unassigned YES unset down down
GigabitEthernet2/0/21 unassigned YES unset up up
GigabitEthernet2/0/22 unassigned YES unset up up
GigabitEthernet2/0/23 unassigned YES unset down down
GigabitEthernet2/0/24 unassigned YES unset down down
GigabitEthernet2/0/25 unassigned YES unset up up
GigabitEthernet2/0/26 unassigned YES unset down down
GigabitEthernet2/0/27 unassigned YES unset down down
GigabitEthernet2/0/28 unassigned YES unset down down
GigabitEthernet2/0/29 unassigned YES unset up up
GigabitEthernet2/0/30 unassigned YES unset down down
GigabitEthernet2/0/31 unassigned YES unset up up
GigabitEthernet2/0/32 unassigned YES unset down down
GigabitEthernet2/0/33 unassigned YES unset up up
GigabitEthernet2/0/34 unassigned YES unset up up
GigabitEthernet2/0/35 unassigned YES unset up up
GigabitEthernet2/0/36 unassigned YES unset up up
GigabitEthernet2/0/37 unassigned YES unset down down
GigabitEthernet2/0/38 unassigned YES unset up up
GigabitEthernet2/0/39 unassigned YES unset down down
GigabitEthernet2/0/40 unassigned YES unset up up
GigabitEthernet2/0/41 unassigned YES unset down down
GigabitEthernet2/0/42 unassigned YES unset down down
GigabitEthernet2/0/43 unassigned YES unset down down
GigabitEthernet2/0/44 unassigned YES unset down down
GigabitEthernet2/0/45 unassigned YES unset down down
GigabitEthernet2/0/46 unassigned YES unset up up
GigabitEthernet2/0/47 unassigned YES unset up up
GigabitEthernet2/0/48 unassigned YES unset up up
GigabitEthernet2/0/49 unassigned YES unset up up
GigabitEthernet2/0/50 unassigned YES unset down down
GigabitEthernet2/0/51 unassigned YES unset down down
GigabitEthernet2/0/52 unassigned YES unset down down
GigabitEthernet3/0/1 unassigned YES unset down down
GigabitEthernet3/0/2 unassigned YES unset down down
GigabitEthernet3/0/3 unassigned YES unset down down
GigabitEthernet3/0/4 unassigned YES unset down down
GigabitEthernet3/0/5 unassigned YES unset down down
GigabitEthernet3/0/6 unassigned YES unset down down
GigabitEthernet3/0/7 unassigned YES unset down down
GigabitEthernet3/0/8 unassigned YES unset down down
GigabitEthernet3/0/9 unassigned YES unset down down
GigabitEthernet3/0/10 unassigned YES unset down down
GigabitEthernet3/0/11 unassigned YES unset down down
GigabitEthernet3/0/12 unassigned YES unset down down
GigabitEthernet3/0/13 unassigned YES unset down down
GigabitEthernet3/0/14 unassigned YES unset down down
GigabitEthernet3/0/15 unassigned YES unset down down
GigabitEthernet3/0/16 unassigned YES unset down down
GigabitEthernet3/0/17 unassigned YES unset down down
GigabitEthernet3/0/18 unassigned YES unset down down
GigabitEthernet3/0/19 unassigned YES unset down down
GigabitEthernet3/0/20 unassigned YES unset down down
GigabitEthernet3/0/21 unassigned YES unset down down
GigabitEthernet3/0/22 unassigned YES unset down down
GigabitEthernet3/0/23 unassigned YES unset down down
GigabitEthernet3/0/24 unassigned YES unset down down
GigabitEthernet3/0/25 unassigned YES unset down down
GigabitEthernet3/0/26 unassigned YES unset down down
GigabitEthernet3/0/27 unassigned YES unset down down
GigabitEthernet3/0/28 unassigned YES unset down down
GigabitEthernet3/0/29 unassigned YES unset down down
GigabitEthernet3/0/30 unassigned YES unset down down
GigabitEthernet3/0/31 unassigned YES unset down down
GigabitEthernet3/0/32 unassigned YES unset down down
GigabitEthernet3/0/33 unassigned YES unset down down
GigabitEthernet3/0/34 unassigned YES unset down down
GigabitEthernet3/0/35 unassigned YES unset down down
GigabitEthernet3/0/36 unassigned YES unset down down
GigabitEthernet3/0/37 unassigned YES unset down down
GigabitEthernet3/0/38 unassigned YES unset down down
GigabitEthernet3/0/39 unassigned YES unset down down
GigabitEthernet3/0/40 unassigned YES unset down down
GigabitEthernet3/0/41 unassigned YES unset down down
GigabitEthernet3/0/42 unassigned YES unset down down
GigabitEthernet3/0/43 unassigned YES unset down down
GigabitEthernet3/0/44 unassigned YES unset down down
GigabitEthernet3/0/45 unassigned YES unset down down
GigabitEthernet3/0/46 unassigned YES unset down down
GigabitEthernet3/0/47 unassigned YES unset down down
GigabitEthernet3/0/48 unassigned YES unset down down
GigabitEthernet3/0/49 unassigned YES unset down down
GigabitEthernet3/0/50 unassigned YES unset down down
GigabitEthernet3/0/51 unassigned YES unset down down
GigabitEthernet3/0/52 unassigned YES unset down down
Port-channel2 unassigned YES unset up up
sh sw det:
Switch/Stack Mac Address : 189c.5d8a.3e00
H/W Current
Switch# Role Mac Address Priority Version State
*1 Master 189c.5d8a.3e00 15 4 Ready
2 Member 189c.5d66.3900 14 4 Ready
3 Member 0000.0000.0000 0 0 Removed
Stack Port Status Neighbors
Switch# Port 1 Port 2 Port 1 Port 2
1 Ok Ok None 2
2 Ok Ok None 1 -
What to do now that Adobe ended support for Flash Player 10.3?
Adobe ended support for Flash Player 10.3 on July 9. Downloads are no longer available anywhere that I can find. Adobe says 11.7 is now the "extended release" version. Since 10.3 has been the only solution when the latest Flash Player version won't work with Firefox, what do we do now? I have tested every Flash Player release after 10.3, and each starts crashing repeatedly after 24 hours. Each time, retreat to 10.3 was the only solution. The other suggestions in Firefox help don't work. I uninstalled 10.3 a few days ago to test 11.8 - the latest. It doesn't work with Firefox. Now I could only install 11.7. It hasn't failed yet, but it probably will tomorrow.
If Flash Player 11.8 and 11.7 don't work, and 10.3 is unavailable, what can we do?You can check for problems with current Flash plugin versions and try these:
*disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
*disable protected mode in the Flash plugin (Flash 11.3+ on Windows Vista and later)
*disable hardware acceleration in the Flash plugin
*http://kb.mozillazine.org/Flash#Troubleshooting
*http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html
*http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html -
Please help! Screen Capture resolution for Flash
Hi,
When I screen capture [using RoBo ScreenCapture] either web
pages off the Net, or dialog boxes of programs [I'm using Flash for
a presentation instead of PP] the images are pixelated or fuzzy or
well, not good enough.
Let me explain In using RoBo, I make the capture at the
highest Jpeg resolution possible. When I bring the jpeg into Flash
[import directly into Library] and bring on the stage, I have to
resize the image because it is too big for the stage [being
800X600]. The projector I will be using for the presentation is
800X600.so I set the stage for that.
When I publish the file and review it [setting my monitor to
800X600] the images look terrible.
Maybe I should explain that when I do the screen captures at
first, my monitor is set at 1600X1200.
Should I set it at 800X600 when doing the captures first? I
mean, does this affect the final output of the resolution of the
jpg's when they are placed in Flash after the capture and import
into the Library?
I have had to make captures of web pages, so I have my
monitor set at 1600X1200 normally so I can get the most real estate
on the screen as possible. I make the screen captures using that
monitor setting. But I have my Flash movie stage set at 800X600.
My questions are:
1. Should I do the captures with the monitor set at 800X600
if the Flash stage is 800X600? If so, why?
2. If the projector resolution is 800X600, can I set my Flash
stage at a higher size [resolution], say 1024X768? Will that
actually affect the resolution when the Flash movie is projected on
a projector with an 800X600 resolution if the Flash movie stage is
larger?
3. What affects the final resolution output of the BMP images
[jpeg's] in Flash for a presentation like I am doing?
4. What size should I capture the images at so I don't have
to resize them in Flash?
WHAH! I just want this presentation to be successful. It's a
training session on educating folks on computer virus
prevention/protection from and ID theft, something this world is in
dire need of!
Thanks in advance form anyone who can help me,
Ellen> Maybe I should explain that when I do the screen
captures at first, my
> monitor
> is set at 1600X1200.
> Should I set it at 800X600 when doing the captures
first?
A screen capture captures whatever number of pixels you are
grabbing. If
your monitor is 1600x1200 and you capture the entire screen,
then the
resolution you have captures is 1600x1200.
Then two things are happening:
1) you are making it a JPG, which is lossy compresion
2) you are shrinking it to 800 x 600.
To shrink it, Flash has to 'throw away' 75% of the pixels of
the original.
So, no matter what, you are ending up with a lower resolution
image than
what you started with.
> 1. Should I do the captures with the monitor set at
800X600 if the Flash
> stage
> is 800X600? If so, why?
That would make sense. Why? You can only show 800x600 pixels
in your final
presentation. What's the point of capturing more than that?
> 2. If the projector resolution is 800X600, can I set my
Flash stage at a
> higher size [resolution], say 1024X768? Will that
actually affect the
> resolution when the Flash movie is projected on a
projector with an
> 800X600
> resolution if the Flash movie stage is larger?
If the images are that resolution, then yes, if you increase
the size of the
flash file, you should be able to see all of the pixels at
that particular
resolution.
> 3. What affects the final resolution output of the BMP
images [jpeg's] in
> Flash for a presentation like I am doing?
As long as you bring the images in at 100%, the available
resolution of the
images shouldn't change at all.
> 4. What size should I capture the images at so I don't
have to resize them
> in
> Flash?
'Actual' size.
> WHAH! I just want this presentation to be successful.
It's a training
> session
> on educating folks on computer virus
prevention/protection from and ID
> theft,
> something this world is in dire need of!
I'm not sure what RoBo is, but have you considered using a
product like
RoboDemo for this type of thing? That should handle
everything for you.
-Darrel
Maybe you are looking for
-
Exporting 16x9 Without Black Letterbox
Hi everyone-- I would like to export a 16x9 video as a quicktime without the black letterbox. Is there anyway to do this? All exports I have tried export the video in a 4x3 frame with black letterboxing. Thanks!
-
Hi i am writing a servlet which has html in it too...so the commands for html pages i just use out.println(""). But i wanted to add a new picture on the page and had this command out.println("<IMG SRC=C:\Documents and Settings\bsharma\My Documents\My
-
Hello, when I boot my PC, on some days several minutes after the boot I get this error, even when I do nothing! I there a way to detect which application is involved in this error? Or which runtime library? I can see that I have this libraries: Micro
-
How can I find Photoshop Elements 7 to download?
I purchased Elements 7 in Jan. 2009, online. I downloaded it to the laptop I had then, . I recently got a new laptop and somehow this software was not transferred from my old to my new laptop. When I went online to Adobe, I could not locate the downl
-
Hyphenation Services Warning after installing CC
Recently upgraded to CC. Now when I open InDesign files, I get warning message: "Hyphenation breaks may change if you edit the text in the document. The following hyphenation services are not installed on this system - Proximity (English: USA)" I cli