Hardware for Premiere's Audio Mixer?

Hey Adobe Community!
I probably know the answer to this question but I'll ask the experts, you guys, to be certain of it
When Im 'teching out' and getting very perfectionist with my edits, a mouse and digital mixer on premiere just cant satisfy me.
I've been wondering....is there a hardware device somewhere in this tech savvy world that can be programmed to adjust the audio tracks individually in premiere's audio mixer? To fine tune each track to your liking without having to click here and there?
I thought the ShuttlePro V2 can do that but it's more towards the actual video editing.
If anyone can provide me any possible info, or 'hack' so to speak, or straight up tell me it's not possible, then it can settle my mind a lot.
Thanks in advance peeps.

So any device that has the Mackie Protocol can work with premiere? Even if there is a control surface that was made primarily for AVID, as long as it has the Mackie Protocol it can work for premiere?
And is it just the Mackie or can other protocols such as ENCON or Red Rover (just saw an adobe video stating these other control surface protocols)?

Similar Messages

  • Premiere CS4 Audio Mixer sometimes records at 33kHz sample freq

    Premiere CS4 has been working fairly well for me when editing travel videos from miniDV tape camcorders, except that when I add voice over using the Audio Mixer it sometimes (10 to 15% or the time) recordes at a 33kHz sample frequency.  I have it set fro DV tape editing and 48kHzsample frewuency, but it still, at times, recordes at a 33kHz sample rate.  I use Adobe Audition to correct the sampe rate and finish the audio clip.  Soundbooth is not a convienent as Audition 1.5 for editing voice over clips - wish it was!  Do I have something set wrong, or is this a bug in Premiere Pro CS4?

    Yes, It should be recording at 48kHz, and most of the time it does,
    but all to often it records at a lower sample rate and I have to redo
    it.  Not a big problem, but most annoying.  I can't find anything
    that I do differently to cause it to happen.  In my current project I
    am up to voice over number 27 and it has happened roughly four or five times.
    Thanks, Bob

  • Fw hardware for premiere.

    We Need hardware for Adobe premiere cc. The problem is..our Mac pro is old and has only fw output. Our monitor has hd Sdi and hdmi input. Any suggestions , something pre-thunderbolt?

    Call forum member Eric at ADK.

  • Ideal Computer and Capture hardware for Premiere Pro CS3

    I'm working with Premiere Pro CS3 and want to build a new computer based on the AMD platform. I'm currently looking at the AMD Phenom 9850, AMD's newest Quad-Core processor. I'm looking at pairing it with 4GB of DDR2 1066 Memory, a 1GB PCI-E x16 Video card with 4 DVI and 1 HDMI outputs, 2TB SATA 3.0GBs 7200 RPM Hard drives in a striped/mirrored RAID array, all running on one of Gigabyte's newest AM2+ mobos. I'll be running XP Pro SP3. I think I've got the computer locked down, unless anyone's got some insight for me into the specs on it. Also, does Premiere Pro CS3 take advantage of Vista's 64-bit yet? I hate Vista with a passion, but if I'll get significant performance increase from it, then I'll make the migration.
    My big question is this: what's Adobe's recommended capture hardware? Budget isn't necessarily a consideration and I'd love something that's got HD-SDI BNC I/O in addition to the standard composite, YCrBr, and DV I/O. I'd also like something that has good pro-audio I/O integrated. Ideally something that would include multiple analog I/O via 1/4" or XLR as well as digital I/O via ADAT lightpipe and AES/EBU. BNC wordclock I/O would be nice too.
    Any recommendations? I'm fairly new to the video world, though I've been in the pro audio business for ten years.
    Thanks in advance!

    >2TB SATA 3.0GBs 7200 RPM Hard drives in a striped/mirrored RAID array
    For video, RAID 3 is your best option, found primarily on Areca cards.
    For the kind of ins & outs you're looking for, I think the Matrox Axio will be your only option. That's ain't cheap, though.

  • Audio Mixer won't write to audio track

    Pleaes look at this screen capture, regarding a problem I am having with Premiere's audio mixer.
    http://www.youtube.com/watch?v=U2SU4L751Ro&feature=youtu.be
    I am trying to write to an audio track, using the Audio mixer.  I set the audio track to Show Track Keyframes. 
    While playing I move the audio slider up and down -- but whenI'm finished nothing has happened. No automation has taken place.
    It is working with other sequences.  Is there a sequence setting that perhaps has turned write for audio to "Off" for this sequence? 
    Thakns for any clarification.
    Rowby

    Hi again, just reloaded the project , sure enough the in/out were up the T/L a bit, once I made them cover the entire sequence it now works as expected...
    I spent 20 mins with a adobe help trying to prove I was entitled to it and still got nowhere, thank god for user groups.
    Much appreciated.
    Jeff J

  • What to do when the client asks for changes after final audio mix?

    Sometimes a client will want changes after the final audio mix has been done. That is, I've already sent the project from Premiere Pro to Audition, done a master mix, and sent it back to Premiere Pro. If I'm then asked to make changes to the video, I don't know of any way to preserve the work I've already done in Audition and just update it with changes. I find myself making the changes in Premiere Pro and re-sending the whole project back to Audition for a completely new mix. This isn't very time efficient, and I'm wondering if anyone knows if I can update a project in Audition with changes in Premiere Pro without having to start again?
    Obviously it's best to have picture lock before doing the final mix, but things happen and people change their minds.
    I'm working in CS6.
    Thanks
    Carolyn

    "The only question I have is whether it is possible to save any of the work
    I've done in Audition when I am resending back from Premiere."
    A: Absolutely
    "When I add more elements to my sequence and unmute the original track and export the
    new sequence to Audition, I am basically starting on a fresh mix, right?"
    A: Yes
    "It's a new sequence?"
    No. It's the same sequence. But without the tracks (stems) you previously had in it.
    "The only option seems to be to overwrite. My question is whether I can save any of the work I've already done in Audition- there is often a couple of hours of work in already.
    A: Before you do anything, save whatever work you've done in Audtion as a session.

  • Adobe Premiere Pro Help | Overview of audio and the Audio Mixer

    This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/overview-audio-audio-mixer.html

    The last section "Customize a VST effect in an options window" for a beginner working their way through the manual makes no sense. VST and how to apply it is not explained, and no explanation appears prior in the manual. To be blunt, it's just a nonsense.

  • "Audio Mix" volume settings premiere elements 10 not "sticking"

    The "Audio Mix" volume settings that I set after adding a soundtrack to video in premiere elements 10 have stopped working and are no longer "sticky". I am running premiere elements on a Macbook pro with about 100GB free disc space and 8MB RAM. The volume settings adjusted using "Audio Mix" would previously "stick" as adjusted. I have not altered anything in how I adjust the volumes but "Audio Mix" has suddenly stopped functioning.  Both the soundtrack and main captured audio track maintain full volume despite adjustment. I have tried to restart the computer and reload the program to no avail.

    Correct.
    I used to be able to adjust the volume with the Audio Mixer "on the fly" with the video playing and it would stay adjusted (as depicted in the tutorials). This no longer happens. The Mixer used to generate keyframes automatically. It no longer appears to generate keyframes and the volume remains at baseline for all the tracks.
    I have not tried to manually set the volume level by dragging it and creating audio keyframes on it yet. I will try this but the videos are long with multiple fade ins and fade outs and this would likely be too laborious to accomplish.

  • DO i need some extra hardware interface for receving both Audio and video

    hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
    but my code is working fine for either one at a time.
    DO i need some extra hardware interface for receving both Audio and video. im using code AVTransmit and AVReceive found from this site only
    After running TX
    i give Dsound:// & vfw://0 in Media Locater only sound is received and no vedio
    and when i give vfw://0 in Media Locater only live video is transmited.
    im using JMF1.1.2e.
    if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
    transmiter/server side code .first run TX on server
    import java.io.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.net.*;
    import java.util.*;
    import javax.media.rtp.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.border.*;
    public class Tx extends JFrame implements ActionListener, KeyListener,
    MouseListener, WindowListener {
    Vector targets;
    JList list;
    JButton startXmit;
    JButton rtcp;
    JButton update;
    JButton expiration;
    JButton statistics;
    JButton addTarget;
    JButton removeTarget;
    JTextField tf_remote_address;
    JTextField tf_remote_data_port;
    JTextField tf_media_file;
    JTextField tf_data_port;
    TargetListModel listModel;
    AVTransmitter avTransmitter;
    RTCPViewer rtcpViewer;
    JCheckBox cb_loop;
    Config config;
    public Tx() {
    setTitle( "JMF/RTP Transmitter");
         config= new Config();
         GridBagLayout gridBagLayout= new GridBagLayout();
         GridBagConstraints gbc;
         JPanel p= new JPanel();
         p.setLayout( gridBagLayout);
         JPanel localPanel= createLocalPanel();
         gbc= new GridBagConstraints();
         gbc.gridx= 0;
         gbc.gridy= 0;
         gbc.gridwidth= 2;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
         p.add( localPanel);
         JPanel targetPanel= createTargetPanel();
         gbc= new GridBagConstraints();
         gbc.gridx= 1;
         gbc.gridy= 1;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
    p.add( targetPanel);
         JPanel mediaPanel= createMediaPanel();
         gbc= new GridBagConstraints();
         gbc.gridx= 1;
         gbc.gridy= 2;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
    p.add( mediaPanel);
    JPanel buttonPanel= new JPanel();
    rtcp= new JButton( "RTCP Monitor");
    update= new JButton( "Transmission Status");
         update.setEnabled( false);
         rtcp.addActionListener( this);
         update.addActionListener( this);
         buttonPanel.add( rtcp);
         buttonPanel.add( update);
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 3;
    gbc.gridwidth= 2;
         gbc.weightx = 1.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.CENTER;
         gbc.fill = GridBagConstraints.HORIZONTAL;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
         p.add( buttonPanel);
    getContentPane().add( p);
         list.addMouseListener( this);
         addWindowListener( this);
    pack();
    setVisible( true);
    private JPanel createMediaPanel() {
    JPanel p= new JPanel();
         GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
         p.setLayout( gridBagLayout);
         JLabel label= new JLabel( "Media Locator:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
         p.add( label);
         tf_media_file= new JTextField( 35);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 0;
         gbc.weightx = 1.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.HORIZONTAL;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
         p.add( tf_media_file);
         tf_media_file.setText( config.media_locator);
         cb_loop= new JCheckBox( "loop");
         startXmit= new JButton( "Start Transmission");
         startXmit.setEnabled( true);
         startXmit.addActionListener( this);
         gbc= new GridBagConstraints();
         gbc.gridx = 2;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
         p.add( cb_loop);
         cb_loop.setSelected( true);
         cb_loop.addActionListener( this);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.CENTER;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
         p.add( startXmit);
         TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
         p.setBorder( titledBorder);
         return p;
    private JPanel createTargetPanel() {
    JPanel p= new JPanel();
         GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
         p.setLayout( gridBagLayout);
         targets= new Vector();
         for( int i= 0; i < config.targets.size(); i++) {
         targets.addElement( config.targets.elementAt( i));
    listModel= new TargetListModel( targets);
    list= new JList( listModel);
         list.addKeyListener( this);
         list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
    JScrollPane scrollPane= new JScrollPane( list,
    ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
    ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
         gbc= new GridBagConstraints();
         gbc.gridx= 0;
         gbc.gridy= 0;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
         p.add( scrollPane);
    JPanel p1= new JPanel();
         p1.setLayout( gridBagLayout);
         JLabel label= new JLabel( "IP Address:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
         p1.add( label);
         tf_remote_address= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
         p1.add( tf_remote_address);
         label= new JLabel( "Data Port:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
         p1.add( label);
         tf_remote_data_port= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
         p1.add( tf_remote_data_port);     
    JPanel p2= new JPanel();
    addTarget= new JButton( "Add Target");     
    removeTarget= new JButton( "Remove Target");
         p2.add( addTarget);
         p2.add( removeTarget);
         addTarget.addActionListener( this);
         removeTarget.addActionListener( this);
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 2;
         gbc.weightx = 1.0;
         gbc.weighty = 0.0;
         gbc.gridwidth= 2;
         gbc.anchor = GridBagConstraints.CENTER;
         gbc.fill = GridBagConstraints.HORIZONTAL;
         gbc.insets = new Insets( 20,5,0,5);
         ((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
         p1.add( p2);
         gbc= new GridBagConstraints();
         gbc.gridx= 1;
         gbc.gridy= 0;
         gbc.weightx= 1.0;
         gbc.weighty= 1.0;
         gbc.anchor= GridBagConstraints.CENTER;
         gbc.fill= GridBagConstraints.BOTH;
         gbc.insets= new Insets( 10, 5, 0, 0);
         ((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
         p.add( p1);
         TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
         p.setBorder( titledBorder);
         return p;
    private JPanel createLocalPanel() {
    JPanel p= new JPanel();
         GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
         p.setLayout( gridBagLayout);
         JLabel label= new JLabel( "IP Address:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
         p.add( label);
         JTextField tf_local_host= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 0;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
         p.add( tf_local_host);
         try {
    String host= InetAddress.getLocalHost().getHostAddress();     
         tf_local_host.setText( host);
         } catch( UnknownHostException e) {
         label= new JLabel( "Data Port:");
         gbc= new GridBagConstraints();
         gbc.gridx = 0;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.EAST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,0,5);
         ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
         p.add( label);
         tf_data_port= new JTextField( 15);
         gbc= new GridBagConstraints();
         gbc.gridx = 1;
         gbc.gridy = 1;
         gbc.weightx = 0.0;
         gbc.weighty = 0.0;
         gbc.anchor = GridBagConstraints.WEST;
         gbc.fill = GridBagConstraints.NONE;
         gbc.insets = new Insets( 5,5,10,5);
         ((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
         p.add( tf_data_port);
         tf_data_port.setText( config.local_data_port);
         TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
         p.setBorder( titledBorder);
         return p;
    public void actionPerformed( ActionEvent event) {
    Object source= event.getSource();
         if( source == addTarget) {
         String ip= tf_remote_address.getText().trim();
         String port= tf_remote_data_port.getText().trim();
         String localPort= tf_data_port.getText().trim();
         addTargetToList( localPort, ip, port);
         if( avTransmitter != null) {
         avTransmitter.addTarget( ip, port);
         } else if( source == removeTarget) {
         int index= list.getSelectedIndex();
         if( index != -1) {
              Target target= (Target) targets.elementAt( index);
              if( avTransmitter != null) {
         avTransmitter.removeTarget( target.ip, target.port);
              targets.removeElement( target);
              listModel.setData( targets);          
         } else if( source == startXmit) {
         if( startXmit.getLabel().equals( "Start Transmission")) {          
         int data_port= new Integer( tf_data_port.getText()).intValue();
              avTransmitter= new AVTransmitter( this, data_port);
         avTransmitter.start( tf_media_file.getText().trim(), targets);          
              avTransmitter.setLooping( cb_loop.isSelected());
         startXmit.setLabel( "Stop Transmission");
         } else if( startXmit.getLabel().equals( "Stop Transmission")) {
              avTransmitter.stop();
              avTransmitter= null;
              removeNonBaseTargets();
              listModel.setData( targets);
         startXmit.setLabel( "Start Transmission");          
         } else if( source == rtcp) {
         if( rtcpViewer == null) {
         rtcpViewer= new RTCPViewer();
         } else {
              rtcpViewer.setVisible( true);
              rtcpViewer.toFront();
         } else if( source == cb_loop) {
         if( avTransmitter != null) {
              avTransmitter.setLooping( cb_loop.isSelected());
    private void removeNonBaseTargets() {
         String localPort= tf_data_port.getText().trim();
         for( int i= targets.size(); i > 0;) {
         Target target= (Target) targets.elementAt( i - 1);
         if( !target.localPort.equals( localPort)) {
    targets.removeElement( target);
         i--;
    public void addTargetToList( String localPort,
                             String ip, String port) {     
    ListUpdater listUpdater= new ListUpdater( localPort, ip,
                                  port, listModel, targets);
    SwingUtilities.invokeLater( listUpdater);           
    public void rtcpReport( String report) {
         if( rtcpViewer != null) {
         rtcpViewer.report( report);
    public void windowClosing( WindowEvent event) {
         config.local_data_port= tf_data_port.getText().trim();
         config.targets= new Vector();
         for( int i= 0; i < targets.size(); i++) {
         Target target= (Target) targets.elementAt( i);
         if( target.localPort.equals( config.local_data_port)) {
              config.addTarget( target.ip, target.port);
         config.media_locator= tf_media_file.getText().trim();
         config.write();
    System.exit( 0);
    public void windowClosed( WindowEvent event) {
    public void windowDeiconified( WindowEvent event) {
    public void windowIconified( WindowEvent event) {
    public void windowActivated( WindowEvent event) {
    public void windowDeactivated( WindowEvent event) {
    public void windowOpened( WindowEvent event) {
    public void keyPressed( KeyEvent event) {
    public void keyReleased( KeyEvent event) {
    Object source= event.getSource();
         if( source == list) {
         int index= list.getSelectedIndex();
    public void keyTyped( KeyEvent event) {
    public void mousePressed( MouseEvent e) {
    public void mouseReleased( MouseEvent e) {
    public void mouseEntered( MouseEvent e) {
    public void mouseExited( MouseEvent e) {
    public void mouseClicked( MouseEvent e) {
    Object source= e.getSource();
         if( source == list) {
         int index= list.getSelectedIndex();
         if( index != -1) {
              Target target= (Target) targets.elementAt( index);
              tf_remote_address.setText( target.ip);
              tf_remote_data_port.setText( target.port);
         int index= list.locationToIndex( e.getPoint());
    public static void main( String[] args) {
    new Tx();
    class TargetListModel extends AbstractListModel {
    private Vector options;
    public TargetListModel( Vector options) {
         this.options= options;
    public int getSize() {
         int size;
         if( options == null) {
         size= 0;
         } else {
         size= options.size();
         return size;
    public Object getElementAt( int index) {
    String name;
    if( index < getSize()) {
         Target o= (Target)options.elementAt( index);
    name= o.localPort + " ---> " + o.ip + ":" + o.port;
         } else {
         name= null;
         return name;
    public void setData( Vector data) {
         options= data;
         fireContentsChanged( this, 0, data.size());
    class ListUpdater implements Runnable {
    String localPort, ip, port;
    TargetListModel listModel;
    Vector targets;
    public ListUpdater( String localPort, String ip, String port,
                   TargetListModel listModel, Vector targets) {
         this.localPort= localPort;
         this.ip= ip;
         this.port= port;
         this.listModel= listModel;
         this.targets= targets;
    public void run() {
    Target target= new Target( localPort, ip, port);
         if( !targetExists( localPort, ip, port)) {
         targets.addElement( target);
    listModel.setData( targets);
    public boolean targetExists( String localPort, String ip, String port) {
         boolean exists= false;
         for( int i= 0; i < targets.size(); i++) {
         Target target= (Target) targets.elementAt( i);
         if( target.localPort.equals( localPort)
         && target.ip.equals( ip)
              && target.port.equals( port)) {          
              exists= true;
         break;
         return exists;
    >>>>>>>>>>>>>>>>>
    import java.awt.*;
    import java.io.*;
    import java.net.InetAddress;
    import java.util.*;
    import javax.media.*;
    import javax.media.protocol.*;
    import javax.media.format.*;
    import javax.media.control.TrackControl;
    import javax.media.control.QualityControl;
    import javax.media.rtp.*;
    import javax.media.rtp.event.*;
    import javax.media.rtp.rtcp.*;
    public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
    ControllerListener {
    // Input MediaLocator
    // Can be a file or http or capture source
    private MediaLocator locator;
    private String ipAddress;
    private int portBase;
    private Processor processor = null;
    private RTPManager rtpMgrs[];
    private int localPorts[];
    private DataSource dataOutput = null;
    private int local_data_port;
    private Tx tx;
    public AVTransmitter( Tx tx, int data_port) {
         this.tx= tx;
         local_data_port= data_port;
    * Starts the transmission. Returns null if transmission started ok.
    * Otherwise it returns a string with the reason why the setup failed.
    public synchronized String start( String filename, Vector targets) {
         String result;
         locator= new MediaLocator( filename);
         // Create a processor for the specified media locator
         // and program it to output JPEG/RTP
         result = createProcessor();
         if (result != null) {
         return result;
         // Create an RTP session to transmit the output of the
         // processor to the specified IP address and port no.
         result = createTransmitter( targets);
         if (result != null) {
         processor.close();
         processor = null;
         return result;
         // Start the transmission
         processor.start();
         return null;
    * Use the RTPManager API to create sessions for each media
    * track of the processor.
    private String createTransmitter( Vector targets) {
         // Cheated. Should have checked the type.
         PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
         PushBufferStream pbss[] = pbds.getStreams();
         rtpMgrs = new RTPManager[pbss.length];
         localPorts = new int[ pbss.length];
         SessionAddress localAddr, destAddr;
         InetAddress ipAddr;
         SendStream sendStream;
         int port;
         SourceDescription srcDesList[];
         for (int i = 0; i < pbss.length; i++) {
         // for (int i = 0; i < 1; i++) {
         try {
              rtpMgrs[i] = RTPManager.newInstance();     
              port = local_data_port + 2*i;
              localPorts[ i]= port;
              localAddr = new SessionAddress( InetAddress.getLocalHost(),
                                  port);
              rtpMgrs.initialize( localAddr);          
              rtpMgrs[i].addReceiveStreamListener(this);
              rtpMgrs[i].addRemoteListener(this);
         for( int k= 0; k < targets.size(); k++) {
              Target target= (Target) targets.elementAt( k);
              int targetPort= new Integer( target.port).intValue();
              addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
              sendStream = rtpMgrs[i].createSendStream(dataOutput, i);          
              sendStream.start();
         } catch (Exception e) {
              e.printStackTrace();
              return e.getMessage();
         return null;
    public void addTarget( String ip, String port) {
         for (int i= 0; i < rtpMgrs.length; i++) {
         int targetPort= new Integer( port).intValue();
         addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
    public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
         try {
         SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                                  new Integer( port).intValue());
         mgr.addTarget( addr);
         tx.addTargetToList( localPort + "", ip, port + "");
         } catch( Exception e) {
         e.printStackTrace();
    public void removeTarget( String ip, String port) {
         try {     
         SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
                                  new Integer( port).intValue());
         for (int i= 0; i < rtpMgrs.length; i++) {
         rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
         } catch( Exception e) {
         e.printStackTrace();
    boolean looping= true;
    public void controllerUpdate( ControllerEvent ce) {
         System.out.println( ce);
         if( ce instanceof DurationUpdateEvent) {
         Time duration= ((DurationUpdateEvent) ce).getDuration();
         System.out.println( "duration: " + duration.getSeconds());
         } else if( ce instanceof EndOfMediaEvent) {
         System.out.println( "END OF MEDIA - looping=" + looping);
         if( looping) {
         processor.setMediaTime( new Time( 0));
              processor.start();
    public void setLooping( boolean flag) {
         looping= flag;
    public void update( ReceiveStreamEvent event) {
         String timestamp= getTimestamp();
         StringBuffer sb= new StringBuffer();
         if( event instanceof InactiveReceiveStreamEvent) {
         sb.append( timestamp + " Inactive Receive Stream");
         } else if( event instanceof ByeEvent) {
         sb.append( timestamp + " Bye");
         } else {
         System.out.println( "ReceiveStreamEvent: "+ event);
         tx.rtcpReport( sb.toString());     
    public void update( RemoteEvent event) {     
         String timestamp= getTimestamp();
         if( event instanceof ReceiverReportEvent) {
         ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
         StringBuffer sb= new StringBuffer();
         sb.append( timestamp + " RR");
         if( rr != null) {
              Participant participant= rr.getParticipant();
              if( participant != null) {
              sb.append( " from " + participant.getCNAME());
              sb.append( " ssrc=" + rr.getSSRC());
              } else {
              sb.append( " ssrc=" + rr.getSSRC());
              tx.rtcpReport( sb.toString());
         } else {
         System.out.println( "RemoteEvent: " + event);
    private String getTimestamp() {
         String timestamp;
         Calendar calendar= Calendar.getInstance();
         int hour= calendar.get( Calendar.HOUR_OF_DAY);
         String hourStr= formatTime( hour);
         int minute= calendar.get( Calendar.MINUTE);
         String minuteStr= formatTime( minute);
         int second= calendar.get( Calendar.SECOND);
         String secondStr= formatTime( second);
         timestamp= hourStr + ":" + minuteStr + ":" + secondStr;     
         return timestamp;
    private String formatTime( int time) {     
         String timeStr;
         if( time < 10) {
         timeStr= "0" + time;
         } else {
         timeStr= "" + time;
         return timeStr;
    * Stops the transmission if already started
    public void stop() {
         synchronized (this) {
         if (processor != null) {
              processor.stop();
              processor.close();
              processor = null;
         for (int i= 0; i < rtpMgrs.length; i++) {
         rtpMgrs[ i].removeTargets( "Session ended.");
              rtpMgrs[ i].dispose();
    public String createProcessor() {
         if (locator == null) {
         return "Locator is null";
         DataSource ds;
         DataSource clone;
         try {
         ds = javax.media.Manager.createDataSource(locator);
         } catch (Exception e) {
         return "Couldn't create DataSource";
         // Try to create a processor to handle the input media locator
         try {
         processor = javax.media.Manager.createProcessor(ds);
         processor.addControllerListener( this);     
         } catch (NoProcessorException npe) {
         return "Couldn't create processor";
         } catch (IOException ioe) {
         return "IOException creating processor";
         // Wait for it to configure
         boolean result = waitForState(processor, Processor.Configured);
         if (result == false)
         return "Couldn't configure processor";
         // Get the tracks from the processor
         TrackControl [] tracks = processor.getTrackControls();
         // Do we have atleast one track?
         if (tracks == null || tracks.length < 1)
         return "Couldn't find tracks in processor";
         // Set the output content descriptor to RAW_RTP
         // This will limit the supported formats reported from
         // Track.getSupportedFormats to only valid RTP formats.
         ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
         processor.setContentDescriptor(cd);
         Format supported[];
         Format chosen;
         boolean atLeastOneTrack = false;
         // Program the tracks.
         for (int i = 0; i < tracks.length; i++) {
         Format format = tracks[i].getFormat();
         if (tracks[i].isEnabled()) {
              supported = tracks[i].getSupportedFormats();
              // We've set the output content to the RAW_RTP.
              // So all the supported formats should work with RTP.
              // We'll just pick the first one.
              if (supported.length > 0) {
              if (supported[0] instanceof VideoFormat) {
                   // For video formats, we should double check the
                   // sizes since not all formats work in all sizes.
                   chosen = checkForVideoSizes(tracks[i].getFormat(),
                                       supported[0]);
              } else
                   chosen = supported[0];
              tracks[i].setFormat(chosen);
              System.err.println("Track " + i + " is set to transmit as:");
              System.err.println(" " + chosen);
              atLeastOneTrack = true;
              } else
              tracks[i].setEnabled(false);
         } else
              tracks[i].setEnabled(false);
         if (!atLeastOneTrack)
         return "Couldn't set any of the tracks to a valid RTP format";
         // Realize the processor. This will internally create a flow
         // graph and attempt to create an output datasource for JPEG/RTP
         // audio frames.
         result = waitForState(processor, Controller.Realized);
         if (result == false)
         return "Couldn't realize processor";
         // Set the JPEG quality to .5.
         setJPEGQuality(processor, 0.5f);
         // Get the output data source of the processor
         dataOutput = processor.getDataOutput();
         return null;
    static SessionAddress destAddr1, destAddr2;
    * For JPEG and H263, we know that they only work for particular
    * sizes. So we'll perform extra checking here to make sure they
    * are of the right sizes.
    Format checkForVideoSizes(Format original, Format supported) {
         int width, height;
         Dimension size = ((VideoFormat)original).getSize();
         Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
         Format h263Fmt = new Format(VideoFormat.H263_RTP);
         if (supported.matches(jpegFmt)) {
         // For JPEG, make sure width and height are divisible by 8.
         width = (size.width % 8 == 0 ? size.width :
                        (int)(size.width / 8) * 8);
         height = (size.height % 8 == 0 ? size.height :
                        (int)(size.height / 8) * 8);
         } else if (supported.matches(h263Fmt)) {
         // For H.263, we only support some specific sizes.
         if (size.width < 128) {
              width = 128;
              height = 96;
         } else if (size.width < 176) {
              width = 176;
              height = 144;
         } else {
              width = 352;
              height = 288;
         } else {
         // We don't know this particular format. We'll just
         // leave it alone then.
         return supported;
         return (new VideoFormat(null,
                        new Dimension(width, height),
                        Format.NOT_SPECIFIED,
                        null,
                        Format.NOT_SPECIFIED)).intersects(supported);
    * Setting the encoding quality to the specified value on the JPEG encoder.
    * 0.5 is a good default.
    void setJPEGQuality(Player p, float val) {
         Control cs[] = p.getControls();
         QualityControl qc = null;
         VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
         // Loop through the controls to find the Quality control for
         // the JPEG encoder.
         for (int i = 0; i < cs.length; i++) {
         if (cs[i] instanceof QualityControl &&
              cs[i] instanceof Owned) {
              Object owner = ((Owned)cs[i]).getOwner();
              // Check to see if the owner is a Codec.
              // Then check for the output format.
              if (owner instanceof Codec) {
              Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
              for (int j = 0; j < fmts.length; j++) {
                   if (fmts[j].matches(jpegFmt)) {
                   qc = (QualityControl)cs[i];
                   qc.setQuality(val);
                   System.err.println("- Setting quality to " +
                             val + " on " + qc);
                   break;
              if (qc != null)
              break;
    * Convenience methods to handle processor's state changes.
    private Integer stateLock = new Integer(0);
    private boolean failed = false;
    Integer getStateLock() {
         return stateLock;
    void setFailed() {
         failed = true;
    private synchronized boolean waitForState(Processor p, int state) {
         p.addControllerListener(new StateListener());
         failed = false;
         // Call the required method on the processor
         if (state == Processor.Configured) {
         p.configure();
         } else if (state == Processor.Realized) {
         p.realize();
         // Wait until we get an event that confirms the
         // success of the method, or a failure event.
         // See StateListener inner class
         while (p.getState() < state && !failed) {
         synchronized (getStateLock()) {
              try {
              getStateLock().wait();
              } catch (InterruptedException ie) {
              return false;
         if (failed)
         return false;
         else
         return true;
    * Inner Classes
    class StateListener implements ControllerListener {
         public void controllerUpdate(ControllerEvent ce) {
         // If there was an error during configure or
         // realiz

    I do this all the time, I put my MBP to a 60 inch Sharp. If you have the video working do the simple thing first. Check to make sure your sound is on your TV and Mac. Then if that doesn't work go to System Prefrences and under sound go to a tab called Output and see if your TV is listed and if it is change it to that setting
    Hope It Works

  • __is there a way to save a preset for audio mixer settings...??

    I have CS5
    Looking to speed up the process so that I don't have to redo the audio mixer settings for every project - rather just tweak where needed.
    So wanted to setup the audio mixer how I want it - and just have it set as default for all projects or have some automated way to apply the same audio mixer settings to each new project.
    What's the best way to do this my people ?
    Thanks!

    I agree with Jim Simon.  Creating your own template is a good workaround to what would be a good feature.
    The ability to save audio presets (and more) is in my feature request list for Pr:
    http://forums.adobe.com/message/4392211#4392211
    Please add your voice to the chorus requesting this feature, and any (or all) of the other useful features on my list.  Adobe listens.  Strength in numbers.   Here's the feature request link:
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
    Bookmark it.

  • Audio Settings for Premiere CS6

    Hi, I currently run a Mac Pro with a 27 inch Apple Monitor with built in camera.  The machine is also running Mountain Lion 10.8.5.  Could someone give me some clarification as to why the Audio Settings for Premiere CS6 are the way they are?
    Example with a Macbook Pro and an iMac when I plug in a headphone I can get the sounds from Premiere pro as well as something from youtube to the headphones.  However in the case of the Mac Pro with the Apple Monitor, when the headphones are plugged in the youtube sounds come through but the Premiere sounds go through the monitor.  I'm aware of the audio settings but I suspect this is working by design because of the different audio options the Mac Pro have and there is nothing broken about this.
    Please advise.
    Thank you.

    I've always found this a bit annoying.
    The intended behaviour is that if you go into Premiere's audio settings, and choose "System Default Input/Output", it should change along with the system (so that the audio comes out wherever YouTube does). In practice, I've found this to be inconsistent in pre-CC versions of Premiere (CC fixes this).
    One tip that may be helpful for you in general on a Mac Pro:
    1. If you don't already have the volume icon in the menu bar (by the clock), enable that in System Preferences > Sound.
    2. Option-click on the icon and you'll get a quick menu of your output options

  • Premiere Pro 6/Mac - 5.1 audio mixer master channel order

    The channel order of the audio mixer 5.1 master channel appears to be L, R, Ls, Rs, C, LFE. Can this be changed to one of the more common standards esp. L, R, C, LFE, Ls, Rs so that I don't have to reconfigure channels for every 5.1 clip I bring into the project.

    Same thing here.  See this post I made prior to seeing yours:
    Output Mapping Preference for 5.1 Audio

  • Better work flow for final audio mix

    Hi everyone,
    I just finished a 20min documentary shot on miniDV. I did the offline cut on my Powerbook G4 then took it to a post house for online and recording the narration and final mix.
    They exported my project to Pro Tools for the audio work. Evidently, when exporting to PT, all my level settings and audio transitions are lost, and we had to re-mix everything from scratch.
    Is this the typical work flow? This is my first paid gig as director/editor, so I'm new at this. But it seems quite ineffiecient.
    Is there a way to export my audio with all my audio settings intact? or at least the level settings. That way, the mixing engineer can fine-tune my rough mix rather than re-mixing from scratch. I'm wondering because I'm cutting another 20min piece where the audio mix, as rough as it is, is quite intricate, and I'd hate to have to re-do it all in PT.
    I suppose one way around this is to work with Soundtrack Pro. But I'm living in Vietnam, and the post houses/recording studios all use Pro Tools.
    Thanks.

    When we send out audio for sweetening we export the show as an OMF 2 file. This allows the PT folks to start with your exising clips and settings and then change them accordingly.
    From FCP you select your sequence and goto file>export>Audio to OMF. We usally give them a version with transitions and one without selectable on the export window. Once the OMF file is created you then image to a disk and hand it over. In return, they will give you bavk an OMF file which you reimport into your show and sync with your show. If your show starts at the 01 hour mark, start the show with one frame of bars and tone. Then have your show start two seconds later. This will make it easy for you to match back up. Also, you should give them a QT of the show with the same one frame of bars and tone for a visual reference for them.
    Hope that helps.
    Mac G5 Dual 2.0   Mac OS X (10.4.3)   Kona 2 HD SDI

  • Audio mixing (track not clip) .Precise level entry for KF levels?

    Ive done a lot of tutorials on setting and mixing audio levels, both clip and track in PrP 5.5 . I want to know the best way to add a keyframe on the timeline (in track audio mode) and enter a precise db setting. Dragging up and down is pretty random and not accurate, especially when setting levels for 2 mono tracks for stereo.
    I am not interested in using the track mixer in live mode because again it is to inaccurate and needs cleaning up. I tried right clicking on the keyframes and got everything EXCEPT the ability for numeric entry. A real basic function for audio mixing.

    Well, upon further inspections its the CLIP volume key frames that are displayed in the Audio Effects area. When you are trying to do TRACK key frames on the timeline, its necessary to click on the SHOW KEY FRAMES icon at the start of the TL audio track. When you switch to SHOW TRACK  KEY FRAMES suddenly the clip cannot be loaded in the SOURCE window (which kind of makes sense) and so the TRACK key frames are not visible for numeric entry.
    So the problem with no ability for numeric entry assigning key frames a db still exists.

  • Extra hardware interface for transmiting both Audio and video to client ??

    hi i m doing e-learning project. i have to capture video from webcam and voice from headphone and send to client.
    but my code is working fine for either one at a time.
    DO i need some extra hardware interface for Transmitting  both Audio and video to client im using code AVTransmit and AVReceive found from this site only
    After running TX
    i give dsound:// & vfw://0 in Media Locater only sound is received and no vedio
    and when i give vfw://0 in Media Locater only live video is transmited.
    im using JMF1.1.2e.
    if any one know the method to run or cause of it plz reply me soon. i will be very thankfull
    transmiter/server side code .first run TX on server
    import java.io.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.net.*;
    import java.util.*;
    import javax.media.rtp.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.border.*;
    public class Tx extends JFrame implements ActionListener, KeyListener,
    MouseListener, WindowListener {
    Vector targets;
    JList list;
    JButton startXmit;
    JButton rtcp;
    JButton update;
    JButton expiration;
    JButton statistics;
    JButton addTarget;
    JButton removeTarget;
    JTextField tf_remote_address;
    JTextField tf_remote_data_port;
    JTextField tf_media_file;
    JTextField tf_data_port;
    TargetListModel listModel;
    AVTransmitter avTransmitter;
    RTCPViewer rtcpViewer;
    JCheckBox cb_loop;
    Config config;
    public Tx() {
    setTitle( "JMF/RTP Transmitter");
    config= new Config();
    GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
    JPanel p= new JPanel();
    p.setLayout( gridBagLayout);
    JPanel localPanel= createLocalPanel();
    gbc= new GridBagConstraints();
    gbc.gridx= 0;
    gbc.gridy= 0;
    gbc.gridwidth= 2;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( localPanel, gbc);
    p.add( localPanel);
    JPanel targetPanel= createTargetPanel();
    gbc= new GridBagConstraints();
    gbc.gridx= 1;
    gbc.gridy= 1;
    gbc.weightx= 1.0;
    gbc.weighty= 1.0;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( targetPanel, gbc);
    p.add( targetPanel);
    JPanel mediaPanel= createMediaPanel();
    gbc= new GridBagConstraints();
    gbc.gridx= 1;
    gbc.gridy= 2;
    gbc.weightx= 1.0;
    gbc.weighty= 1.0;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( mediaPanel, gbc);
    p.add( mediaPanel);
    JPanel buttonPanel= new JPanel();
    rtcp= new JButton( "RTCP Monitor");
    update= new JButton( "Transmission Status");
    update.setEnabled( false);
    rtcp.addActionListener( this);
    update.addActionListener( this);
    buttonPanel.add( rtcp);
    buttonPanel.add( update);
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 3;
    gbc.gridwidth= 2;
    gbc.weightx = 1.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.CENTER;
    gbc.fill = GridBagConstraints.HORIZONTAL;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( buttonPanel, gbc);
    p.add( buttonPanel);
    getContentPane().add( p);
    list.addMouseListener( this);
    addWindowListener( this);
    pack();
    setVisible( true);
    private JPanel createMediaPanel() {
    JPanel p= new JPanel();
    GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
    p.setLayout( gridBagLayout);
    JLabel label= new JLabel( "Media Locator:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
    p.add( label);
    tf_media_file= new JTextField( 35);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 0;
    gbc.weightx = 1.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.HORIZONTAL;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( tf_media_file, gbc);
    p.add( tf_media_file);
    tf_media_file.setText( config.media_locator);
    cb_loop= new JCheckBox( "loop");
    startXmit= new JButton( "Start Transmission");
    startXmit.setEnabled( true);
    startXmit.addActionListener( this);
    gbc= new GridBagConstraints();
    gbc.gridx = 2;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( cb_loop, gbc);
    p.add( cb_loop);
    cb_loop.setSelected( true);
    cb_loop.addActionListener( this);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.CENTER;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( startXmit, gbc);
    p.add( startXmit);
    TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Source");
    p.setBorder( titledBorder);
    return p;
    private JPanel createTargetPanel() {
    JPanel p= new JPanel();
    GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
    p.setLayout( gridBagLayout);
    targets= new Vector();
    for( int i= 0; i < config.targets.size(); i++) {
    targets.addElement( config.targets.elementAt( i));
    listModel= new TargetListModel( targets);
    list= new JList( listModel);
    list.addKeyListener( this);
    list.setPrototypeCellValue( "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx");
    JScrollPane scrollPane= new JScrollPane( list,
    ScrollPaneConstants.VERTICAL_SCROLLBAR_AS_NEEDED,
    ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
    gbc= new GridBagConstraints();
    gbc.gridx= 0;
    gbc.gridy= 0;
    gbc.weightx= 1.0;
    gbc.weighty= 1.0;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( scrollPane, gbc);
    p.add( scrollPane);
    JPanel p1= new JPanel();
    p1.setLayout( gridBagLayout);
    JLabel label= new JLabel( "IP Address:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
    p1.add( label);
    tf_remote_address= new JTextField( 15);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_address, gbc);
    p1.add( tf_remote_address);
    label= new JLabel( "Data Port:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( label, gbc);
    p1.add( label);
    tf_remote_data_port= new JTextField( 15);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( tf_remote_data_port, gbc);
    p1.add( tf_remote_data_port);
    JPanel p2= new JPanel();
    addTarget= new JButton( "Add Target");
    removeTarget= new JButton( "Remove Target");
    p2.add( addTarget);
    p2.add( removeTarget);
    addTarget.addActionListener( this);
    removeTarget.addActionListener( this);
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 2;
    gbc.weightx = 1.0;
    gbc.weighty = 0.0;
    gbc.gridwidth= 2;
    gbc.anchor = GridBagConstraints.CENTER;
    gbc.fill = GridBagConstraints.HORIZONTAL;
    gbc.insets = new Insets( 20,5,0,5);
    ((GridBagLayout)p1.getLayout()).setConstraints( p2, gbc);
    p1.add( p2);
    gbc= new GridBagConstraints();
    gbc.gridx= 1;
    gbc.gridy= 0;
    gbc.weightx= 1.0;
    gbc.weighty= 1.0;
    gbc.anchor= GridBagConstraints.CENTER;
    gbc.fill= GridBagConstraints.BOTH;
    gbc.insets= new Insets( 10, 5, 0, 0);
    ((GridBagLayout)p.getLayout()).setConstraints( p1, gbc);
    p.add( p1);
    TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Targets");
    p.setBorder( titledBorder);
    return p;
    private JPanel createLocalPanel() {
    JPanel p= new JPanel();
    GridBagLayout gridBagLayout= new GridBagLayout();
    GridBagConstraints gbc;
    p.setLayout( gridBagLayout);
    JLabel label= new JLabel( "IP Address:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
    p.add( label);
    JTextField tf_local_host= new JTextField( 15);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 0;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p.getLayout()).setConstraints( tf_local_host, gbc);
    p.add( tf_local_host);
    try {
    String host= InetAddress.getLocalHost().getHostAddress();
    tf_local_host.setText( host);
    } catch( UnknownHostException e) {
    label= new JLabel( "Data Port:");
    gbc= new GridBagConstraints();
    gbc.gridx = 0;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.EAST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,0,5);
    ((GridBagLayout)p.getLayout()).setConstraints( label, gbc);
    p.add( label);
    tf_data_port= new JTextField( 15);
    gbc= new GridBagConstraints();
    gbc.gridx = 1;
    gbc.gridy = 1;
    gbc.weightx = 0.0;
    gbc.weighty = 0.0;
    gbc.anchor = GridBagConstraints.WEST;
    gbc.fill = GridBagConstraints.NONE;
    gbc.insets = new Insets( 5,5,10,5);
    ((GridBagLayout)p.getLayout()).setConstraints( tf_data_port, gbc);
    p.add( tf_data_port);
    tf_data_port.setText( config.local_data_port);
    TitledBorder titledBorder= new TitledBorder( new EtchedBorder(), "Local Host");
    p.setBorder( titledBorder);
    return p;
    public void actionPerformed( ActionEvent event) {
    Object source= event.getSource();
    if( source == addTarget) {
    String ip= tf_remote_address.getText().trim();
    String port= tf_remote_data_port.getText().trim();
    String localPort= tf_data_port.getText().trim();
    addTargetToList( localPort, ip, port);
    if( avTransmitter != null) {
    avTransmitter.addTarget( ip, port);
    } else if( source == removeTarget) {
    int index= list.getSelectedIndex();
    if( index != -1) {
    Target target= (Target) targets.elementAt( index);
    if( avTransmitter != null) {
    avTransmitter.removeTarget( target.ip, target.port);
    targets.removeElement( target);
    listModel.setData( targets);
    } else if( source == startXmit) {
    if( startXmit.getLabel().equals( "Start Transmission")) {
    int data_port= new Integer( tf_data_port.getText()).intValue();
    avTransmitter= new AVTransmitter( this, data_port);
    avTransmitter.start( tf_media_file.getText().trim(), targets);
    avTransmitter.setLooping( cb_loop.isSelected());
    startXmit.setLabel( "Stop Transmission");
    } else if( startXmit.getLabel().equals( "Stop Transmission")) {
    avTransmitter.stop();
    avTransmitter= null;
    removeNonBaseTargets();
    listModel.setData( targets);
    startXmit.setLabel( "Start Transmission");
    } else if( source == rtcp) {
    if( rtcpViewer == null) {
    rtcpViewer= new RTCPViewer();
    } else {
    rtcpViewer.setVisible( true);
    rtcpViewer.toFront();
    } else if( source == cb_loop) {
    if( avTransmitter != null) {
    avTransmitter.setLooping( cb_loop.isSelected());
    private void removeNonBaseTargets() {
    String localPort= tf_data_port.getText().trim();
    for( int i= targets.size(); i > 0;) {
    Target target= (Target) targets.elementAt( i - 1);
    if( !target.localPort.equals( localPort)) {
    targets.removeElement( target);
    i--;
    public void addTargetToList( String localPort,
    String ip, String port) {
    ListUpdater listUpdater= new ListUpdater( localPort, ip,
    port, listModel, targets);
    SwingUtilities.invokeLater( listUpdater);
    public void rtcpReport( String report) {
    if( rtcpViewer != null) {
    rtcpViewer.report( report);
    public void windowClosing( WindowEvent event) {
    config.local_data_port= tf_data_port.getText().trim();
    config.targets= new Vector();
    for( int i= 0; i < targets.size(); i++) {
    Target target= (Target) targets.elementAt( i);
    if( target.localPort.equals( config.local_data_port)) {
    config.addTarget( target.ip, target.port);
    config.media_locator= tf_media_file.getText().trim();
    config.write();
    System.exit( 0);
    public void windowClosed( WindowEvent event) {
    public void windowDeiconified( WindowEvent event) {
    public void windowIconified( WindowEvent event) {
    public void windowActivated( WindowEvent event) {
    public void windowDeactivated( WindowEvent event) {
    public void windowOpened( WindowEvent event) {
    public void keyPressed( KeyEvent event) {
    public void keyReleased( KeyEvent event) {
    Object source= event.getSource();
    if( source == list) {
    int index= list.getSelectedIndex();
    public void keyTyped( KeyEvent event) {
    public void mousePressed( MouseEvent e) {
    public void mouseReleased( MouseEvent e) {
    public void mouseEntered( MouseEvent e) {
    public void mouseExited( MouseEvent e) {
    public void mouseClicked( MouseEvent e) {
    Object source= e.getSource();
    if( source == list) {
    int index= list.getSelectedIndex();
    if( index != -1) {
    Target target= (Target) targets.elementAt( index);
    tf_remote_address.setText( target.ip);
    tf_remote_data_port.setText( target.port);
    int index= list.locationToIndex( e.getPoint());
    public static void main( String[] args) {
    new Tx();
    class TargetListModel extends AbstractListModel {
    private Vector options;
    public TargetListModel( Vector options) {
    this.options= options;
    public int getSize() {
    int size;
    if( options == null) {
    size= 0;
    } else {
    size= options.size();
    return size;
    public Object getElementAt( int index) {
    String name;
    if( index < getSize()) {
    Target o= (Target)options.elementAt( index);
    name= o.localPort + " ---> " + o.ip + ":" + o.port;
    } else {
    name= null;
    return name;
    public void setData( Vector data) {
    options= data;
    fireContentsChanged( this, 0, data.size());
    class ListUpdater implements Runnable {
    String localPort, ip, port;
    TargetListModel listModel;
    Vector targets;
    public ListUpdater( String localPort, String ip, String port,
    TargetListModel listModel, Vector targets) {
    this.localPort= localPort;
    this.ip= ip;
    this.port= port;
    this.listModel= listModel;
    this.targets= targets;
    public void run() {
    Target target= new Target( localPort, ip, port);
    if( !targetExists( localPort, ip, port)) {
    targets.addElement( target);
    listModel.setData( targets);
    public boolean targetExists( String localPort, String ip, String port) {
    boolean exists= false;
    for( int i= 0; i < targets.size(); i++) {
    Target target= (Target) targets.elementAt( i);
    if( target.localPort.equals( localPort)
    && target.ip.equals( ip)
    && target.port.equals( port)) {
    exists= true;
    break;
    return exists;
    import java.awt.*;
    import java.io.*;
    import java.net.InetAddress;
    import java.util.*;
    import javax.media.*;
    import javax.media.protocol.*;
    import javax.media.format.*;
    import javax.media.control.TrackControl;
    import javax.media.control.QualityControl;
    import javax.media.rtp.*;
    import javax.media.rtp.event.*;
    import javax.media.rtp.rtcp.*;
    public class AVTransmitter implements ReceiveStreamListener, RemoteListener,
    ControllerListener {
    // Input MediaLocator
    // Can be a file or http or capture source
    private MediaLocator locator;
    private String ipAddress;
    private int portBase;
    private Processor processor = null;
    private RTPManager rtpMgrs[];
    private int localPorts[];
    private DataSource dataOutput = null;
    private int local_data_port;
    private Tx tx;
    public AVTransmitter( Tx tx, int data_port) {
    this.tx= tx;
    local_data_port= data_port;
    * Starts the transmission. Returns null if transmission started ok.
    * Otherwise it returns a string with the reason why the setup failed.
    public synchronized String start( String filename, Vector targets) {
    String result;
    locator= new MediaLocator( filename);
    // Create a processor for the specified media locator
    // and program it to output JPEG/RTP
    result = createProcessor();
    if (result != null) {
    return result;
    // Create an RTP session to transmit the output of the
    // processor to the specified IP address and port no.
    result = createTransmitter( targets);
    if (result != null) {
    processor.close();
    processor = null;
    return result;
    // Start the transmission
    processor.start();
    return null;
    * Use the RTPManager API to create sessions for each media
    * track of the processor.
    private String createTransmitter( Vector targets) {
    // Cheated. Should have checked the type.
    PushBufferDataSource pbds = (PushBufferDataSource)dataOutput;
    PushBufferStream pbss[] = pbds.getStreams();
    rtpMgrs = new RTPManager[pbss.length];
    localPorts = new int[ pbss.length];
    SessionAddress localAddr, destAddr;
    InetAddress ipAddr;
    SendStream sendStream;
    int port;
    SourceDescription srcDesList[];
    for (int i = 0; i < pbss.length; i++) {
    // for (int i = 0; i < 1; i++) {
    try {
    rtpMgrs[i] = RTPManager.newInstance();
    port = local_data_port + 2*i;
    localPorts[ i]= port;
    localAddr = new SessionAddress( InetAddress.getLocalHost(),
    port);
    rtpMgrs.initialize( localAddr);
    rtpMgrs[i].addReceiveStreamListener(this);
    rtpMgrs[i].addRemoteListener(this);
    for( int k= 0; k < targets.size(); k++) {
    Target target= (Target) targets.elementAt( k);
    int targetPort= new Integer( target.port).intValue();
    addTarget( localPorts[ i], rtpMgrs[ i], target.ip, targetPort + 2*i);
    sendStream = rtpMgrs[i].createSendStream(dataOutput, i);
    sendStream.start();
    } catch (Exception e) {
    e.printStackTrace();
    return e.getMessage();
    return null;
    public void addTarget( String ip, String port) {
    for (int i= 0; i < rtpMgrs.length; i++) {
    int targetPort= new Integer( port).intValue();
    addTarget( localPorts[ i], rtpMgrs[ i], ip, targetPort + 2*i);
    public void addTarget( int localPort, RTPManager mgr, String ip, int port) {
    try {
    SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
    new Integer( port).intValue());
    mgr.addTarget( addr);
    tx.addTargetToList( localPort + "", ip, port + "");
    } catch( Exception e) {
    e.printStackTrace();
    public void removeTarget( String ip, String port) {
    try {
    SessionAddress addr= new SessionAddress( InetAddress.getByName( ip),
    new Integer( port).intValue());
    for (int i= 0; i < rtpMgrs.length; i++) {
    rtpMgrs[ i].removeTarget( addr, "target removed from transmitter.");
    } catch( Exception e) {
    e.printStackTrace();
    boolean looping= true;
    public void controllerUpdate( ControllerEvent ce) {
    System.out.println( ce);
    if( ce instanceof DurationUpdateEvent) {
    Time duration= ((DurationUpdateEvent) ce).getDuration();
    System.out.println( "duration: " + duration.getSeconds());
    } else if( ce instanceof EndOfMediaEvent) {
    System.out.println( "END OF MEDIA - looping=" + looping);
    if( looping) {
    processor.setMediaTime( new Time( 0));
    processor.start();
    public void setLooping( boolean flag) {
    looping= flag;
    public void update( ReceiveStreamEvent event) {
    String timestamp= getTimestamp();
    StringBuffer sb= new StringBuffer();
    if( event instanceof InactiveReceiveStreamEvent) {
    sb.append( timestamp + " Inactive Receive Stream");
    } else if( event instanceof ByeEvent) {
    sb.append( timestamp + " Bye");
    } else {
    System.out.println( "ReceiveStreamEvent: "+ event);
    tx.rtcpReport( sb.toString());
    public void update( RemoteEvent event) {
    String timestamp= getTimestamp();
    if( event instanceof ReceiverReportEvent) {
    ReceiverReport rr= ((ReceiverReportEvent) event).getReport();
    StringBuffer sb= new StringBuffer();
    sb.append( timestamp + " RR");
    if( rr != null) {
    Participant participant= rr.getParticipant();
    if( participant != null) {
    sb.append( " from " + participant.getCNAME());
    sb.append( " ssrc=" + rr.getSSRC());
    } else {
    sb.append( " ssrc=" + rr.getSSRC());
    tx.rtcpReport( sb.toString());
    } else {
    System.out.println( "RemoteEvent: " + event);
    private String getTimestamp() {
    String timestamp;
    Calendar calendar= Calendar.getInstance();
    int hour= calendar.get( Calendar.HOUR_OF_DAY);
    String hourStr= formatTime( hour);
    int minute= calendar.get( Calendar.MINUTE);
    String minuteStr= formatTime( minute);
    int second= calendar.get( Calendar.SECOND);
    String secondStr= formatTime( second);
    timestamp= hourStr + ":" + minuteStr + ":" + secondStr;
    return timestamp;
    private String formatTime( int time) {
    String timeStr;
    if( time < 10) {
    timeStr= "0" + time;
    } else {
    timeStr= "" + time;
    return timeStr;
    * Stops the transmission if already started
    public void stop() {
    synchronized (this) {
    if (processor != null) {
    processor.stop();
    processor.close();
    processor = null;
    for (int i= 0; i < rtpMgrs.length; i++) {
    rtpMgrs[ i].removeTargets( "Session ended.");
    rtpMgrs[ i].dispose();
    public String createProcessor() {
    if (locator == null) {
    return "Locator is null";
    DataSource ds;
    DataSource clone;
    try {
    ds = javax.media.Manager.createDataSource(locator);
    } catch (Exception e) {
    return "Couldn't create DataSource";
    // Try to create a processor to handle the input media locator
    try {
    processor = javax.media.Manager.createProcessor(ds);
    processor.addControllerListener( this);
    } catch (NoProcessorException npe) {
    return "Couldn't create processor";
    } catch (IOException ioe) {
    return "IOException creating processor";
    // Wait for it to configure
    boolean result = waitForState(processor, Processor.Configured);
    if (result == false)
    return "Couldn't configure processor";
    // Get the tracks from the processor
    TrackControl [] tracks = processor.getTrackControls();
    // Do we have atleast one track?
    if (tracks == null || tracks.length < 1)
    return "Couldn't find tracks in processor";
    // Set the output content descriptor to RAW_RTP
    // This will limit the supported formats reported from
    // Track.getSupportedFormats to only valid RTP formats.
    ContentDescriptor cd = new ContentDescriptor(ContentDescriptor.RAW_RTP);
    processor.setContentDescriptor(cd);
    Format supported[];
    Format chosen;
    boolean atLeastOneTrack = false;
    // Program the tracks.
    for (int i = 0; i < tracks.length; i++) {
    Format format = tracks[i].getFormat();
    if (tracks[i].isEnabled()) {
    supported = tracks[i].getSupportedFormats();
    // We've set the output content to the RAW_RTP.
    // So all the supported formats should work with RTP.
    // We'll just pick the first one.
    if (supported.length > 0) {
    if (supported[0] instanceof VideoFormat) {
    // For video formats, we should double check the
    // sizes since not all formats work in all sizes.
    chosen = checkForVideoSizes(tracks[i].getFormat(),
    supported[0]);
    } else
    chosen = supported[0];
    tracks[i].setFormat(chosen);
    System.err.println("Track " + i + " is set to transmit as:");
    System.err.println(" " + chosen);
    atLeastOneTrack = true;
    } else
    tracks[i].setEnabled(false);
    } else
    tracks[i].setEnabled(false);
    if (!atLeastOneTrack)
    return "Couldn't set any of the tracks to a valid RTP format";
    // Realize the processor. This will internally create a flow
    // graph and attempt to create an output datasource for JPEG/RTP
    // audio frames.
    result = waitForState(processor, Controller.Realized);
    if (result == false)
    return "Couldn't realize processor";
    // Set the JPEG quality to .5.
    setJPEGQuality(processor, 0.5f);
    // Get the output data source of the processor
    dataOutput = processor.getDataOutput();
    return null;
    static SessionAddress destAddr1, destAddr2;
    * For JPEG and H263, we know that they only work for particular
    * sizes. So we'll perform extra checking here to make sure they
    * are of the right sizes.
    Format checkForVideoSizes(Format original, Format supported) {
    int width, height;
    Dimension size = ((VideoFormat)original).getSize();
    Format jpegFmt = new Format(VideoFormat.JPEG_RTP);
    Format h263Fmt = new Format(VideoFormat.H263_RTP);
    if (supported.matches(jpegFmt)) {
    // For JPEG, make sure width and height are divisible by 8.
    width = (size.width % 8 == 0 ? size.width :
    (int)(size.width / 8) * 8);
    height = (size.height % 8 == 0 ? size.height :
    (int)(size.height / 8) * 8);
    } else if (supported.matches(h263Fmt)) {
    // For H.263, we only support some specific sizes.
    if (size.width < 128) {
    width = 128;
    height = 96;
    } else if (size.width < 176) {
    width = 176;
    height = 144;
    } else {
    width = 352;
    height = 288;
    } else {
    // We don't know this particular format. We'll just
    // leave it alone then.
    return supported;
    return (new VideoFormat(null,
    new Dimension(width, height),
    Format.NOT_SPECIFIED,
    null,
    Format.NOT_SPECIFIED)).intersects(supported);
    * Setting the encoding quality to the specified value on the JPEG encoder.
    * 0.5 is a good default.
    void setJPEGQuality(Player p, float val) {
    Control cs[] = p.getControls();
    QualityControl qc = null;
    VideoFormat jpegFmt = new VideoFormat(VideoFormat.JPEG);
    // Loop through the controls to find the Quality control for
    // the JPEG encoder.
    for (int i = 0; i < cs.length; i++) {
    if (cs[i] instanceof QualityControl &&
    cs[i] instanceof Owned) {
    Object owner = ((Owned)cs[i]).getOwner();
    // Check to see if the owner is a Codec.
    // Then check for the output format.
    if (owner instanceof Codec) {
    Format fmts[] = ((Codec)owner).getSupportedOutputFormats(null);
    for (int j = 0; j < fmts.length; j++) {
    if (fmts[j].matches(jpegFmt)) {
    qc = (QualityControl)cs[i];
    qc.setQuality(val);
    System.err.println("- Setting quality to " +
    val + " on " + qc);
    break;
    if (qc != null)
    break;
    * Convenience methods to handle processor's state changes.
    private Integer stateLock = new Integer(0);
    private boolean failed = false;
    Integer getStateLock() {
    return stateLock;
    void setFailed() {
    failed = true;
    private synchronized boolean waitForState(Processor p, int state) {
    p.addControllerListener(new StateListener());
    failed = false;
    // Call the required method on the processor
    if (state == Processor.Configured) {
    p.configure();
    } else if (state == Processor.Realized) {
    p.realize();
    // Wait until we get an event that confirms the
    // success of the method, or a failure event.
    // See StateListener inner class
    while (p.getState() < state && !failed) {
    synchronized (getStateLock()) {
    try {
    getStateLock().wait();
    } catch (InterruptedException ie) {
    return false;
    if (failed)
    return false;
    else
    return true;
    * Inner Classes
    class StateListener implements ControllerListener {
    public void controllerUpdate(ControllerEvent ce) {
    // If there was an error during configure or
    // realize, the processor will be closed
    if (ce instanceof ControllerClosedEvent)
    setFailed();
    // All controller events, send a notification
    // to the waiting thread in waitForState method.
    if (ce instanceof ControllerEvent) {
    synchronized (getStateLock()) {
    getStateLock().notifyAll();
    import java.io.*;
    import java.util.*;
    public class Config {
    private String pathPrefix;
    public String local_data_port;
    public Vector targets;
    public String media_locator;
    public Config() {
    pathPrefix= System.getProperty( "user.home") + File.separator;
    read();
    public void read() {
    targets= new Vector();
    try {
    String path= pathPrefix + "xmit.dat";
    FileInputStream fin= new FileInputStream( path);
    BufferedInputStream bin= new BufferedInputStream( fin);
    DataInputStream din= new DataInputStream( bin);
    local_data_port= readString( din);
    int n_targets= din.readInt();
    for( int i= 0; i < n_targets; i++) {
    String ip= readString( din);
    String port= readString( din);
    targets.addElement( new Target( local_data_port, ip, port));
    media_locator= readString( din);
    fin.close();
    } catch( IOException e) {
    System.out.println( "xmit.dat file missing!");
    local_data_port= "";
    media_locator= "";
    public void write() {
    try {
    String path= pathPrefix + "xmit.dat";
    FileOutputStream fout= new FileOutputStream( path);
    BufferedOutputStream bout= new BufferedOutputStream( fout);
    DataOutputStream dout= new DataOutputStream( bout);
    writeString( dout, local_data_port);
    dout.writeInt( targets.size());
    for( int i= 0; i < targets.size(); i++) {
    Target target= (Target) targets.elementAt( i);
    writeString( dout, target.ip);
    writeString( dout, target.port);
    writeString( dout, media_locator);
    dout.flush();
    dout.close();
    fout.close();
    } catch( IOException e) {
    System.out.println( "Error writing xmit.dat!");
    public String readString( DataInputStream din) {
    String s= null;
    try {
    short length= din.readShort();
    if( length > 0) {
    byte buf[]= new byte[ length];
    din.read( buf, 0, length);
    s= new String( buf);
    } catch( IOException e) {
    System.err.println( e);
    return s;
    public void writeString( DataOutputStream dout, String str) {
    try {
    if( str != null) {
    dout.writeShort( str.length());
    dout.writeBytes( str);
    } else {
    dout.writeShort( 0);
    } catch( Exception e) {
    e.printStackTrace();
    public void addTarget( String ip, String port) {
    targets.addElement( new Target( "", ip, port));
    import java.io.*;
    import java.awt.*;
    import java.awt.event.*;
    import java.net.*;
    import java.util.*;
    import javax.media.rtp.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.border.*;
    public class RTCPViewer extends JFrame implements ActionListener, KeyListener,
    MouseListener, WindowListener {
    private JList list;
    private Vector reports;
    private RtcpListModel listModel;
    private JButton clear;
    private JButton start;
    private boolean recording;
    public RTCPViewer() {
    setTitle( "JMF/RTCP Tracer");
    re

    I'm also getting some really bad sound quality on facebook notifications. I've been forced to disable them they sound horrible like they are clipping.
    Trying to figure out if this is a problem on all Late 2013 15" macbook pros or if mine is defective? This occurs even at around 20-30% volume levels with the Facebook notification sound problems...

Maybe you are looking for