Hardware key is not displayed in SAP B1 8.81

Hi,
We installed SAP B1 8.81(Evaluation version). Hardware key is exists in Service manager -> Licence Manger.
But it is not displaying in Client System 's Help -> About SAP Business one.
Please let me know how to retrieve hardware key.
Thanks in advance

Hi,
Thanks for reply.
For security purpose we are using Hardware Key of Client's Help --> About SAP business one form --> Hardware key.
Hardware is null in this form in SAP B1 8.81.
Kindly help us to resolve the issue
Thanks in advance
Parthiban

Similar Messages

User Forms are not displaying in SAP B1 2005

Hi,
I have created an application using SAP B1 2004. All user forms are displaying properly in SAP B1 2004. But when I am trying to run the same application in SAP B1 2005, It is unable to display some of the User Forms.
Can any body help me for the same?
Thanks.
Archana.

Hi Archana,
Are you using some special items in your form?
You say the form is not displayed, do you have a return error or exception when trying to open it in debug mode?
In Debug mode please pay attention to the VS.NET configuration, you have in Debug Menu -> Exceptions to configure all types of exception to throw into the debugger. Sometimes the COM exception are not thrown and your code just jumps after the error to the end of your method...
Have you tried to open the xml of your form with the ScreenPainter to see if everything is correct in there?
Hope it helps
Trinidad.

Key figure not displaying in SNC Web View

Hi All,
I have added a Key figure in Data Matrix View and its not displaying in SNC Web view- SMI Monitor.
Is there any activation settings after adding key figure in Data Matrix View, please help.
Regards,
Vikram

Hi,
You can try following steps,
1) Clear the Cache & Re-login.
2) Ensure in Setting the Key figure " Invisible" check box is not selected.( SNC 7.0 v)
3) Check the related Product is applicable for the new Key fig added, like if its a SMI Product & you are expecting to see for a PO key figure...
Regards,
Vasu

Numpad keys are not working for SAP in Linux

hi,
     i have installed sapgui710rev4 and my installation has been perfect but when i try to configure my SAP server ip address my numpad keys are not working.. please anyone help me.
    thanks in advance
     kumar raju

Dear Kumar,
please ask your question in the [SAP GUI Forum|SAP GUI; which is also the right forum for the JavaGUI.
Thanks,
   Hannes

Laptop wireless hard blocked - hardware key does not toggle state

hello,
this is my 3d arch install. i kept notes, and followed them exactly and this time i've ran into an issue i just cannot seem to debug myself.
this laptop is the hp envy 4 1130us. i also have the hp envy 6t-1000 with arch installed and this is not a problem at all for that version of the computer (one is my personal the other is my work machine).
after installing the base system i installed the wifi related packages:
pacman -S wpa_supplicant iw wireless_tools networkmanager network_manager_applet gnome_keyring
i enabled the network manager
systemctl enable NetworkManager.service
disabled dhcp (enabled from install)
systemctl stop dhcpcd.service
systemctl disable dhcpcd.service
enabled the wpa toolkit
systemctl enable wpa_supplication
add my user to the network group
gpasswd -a xero network
turn off the network interface controllers
ip link set down eno1
ip link set down wlo1
start the supplicant
systemctl start wpa_supplicant
start the network manager
systemctl start NetworkManager.service
reboot
after that the wired internet work perfect fine. the network manager applet detects the network and does it's thing. i configured and tested vpn as well, and it is also working as expected.
but then i pressed the hardware wifi switch (F12 key) and nothing happened. i pressed it a few more times, rebooted, tried again, tried during the bios/post test, etc. i simply cannot disable the hardware lock on the wireless.
so i went hunting on the wiki and here in the forums. nothing has worked. since, this was a fresh install last night i actually wiped the drive and tried the install again hoping i did something wrong, but with no avail. here's the debug messages:
[~]── - lspci -k (edited for brevity)
01:00.2 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0a)
Subsystem: Hewlett-Packard Company Device 1894
Kernel driver in use: r8169
Kernel modules: r8169
02:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)
Subsystem: Intel Corporation Centrino Wireless-N 2230 BGN
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
[~]── - ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eno1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether 28:92:4a:1c:0c:af brd ff:ff:ff:ff:ff:ff
3: wlo1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 68:5d:43:b1:d3:89 brd ff:ff:ff:ff:ff:ff
[~]── - ip link set wlo1 up
RTNETLINK answers: Operation not possible due to RF-kill
[~]── - dmesg | grep firmware
[ 7.166700] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[~]── - dmesg | grep iwlwifi
[ 7.133763] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 7.141638] iwlwifi 0000:02:00.0: irq 46 for MSI/MSI-X
[ 7.166700] iwlwifi 0000:02:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 7.245928] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 7.245934] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 7.245937] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 7.245941] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N 2230 BGN, REV=0xC8
[ 7.246078] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 7.253731] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
[~]── - rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
so based on some of the output it looks like RFKILL is blocking it during the boot process. i tried to unblock it via the unblock all command, but that's only soft blocks. i'm really not sure what to try next, so i'm asking for help (before i throw my laptop out the window).
thank you in advance for any advice

yeah,
i was thinking that recompiling each kernel would be a huge hassle as well.
so i just booted 2 live usb disks.
the 1st, the arch installer - the wifi was still hard blocked.
the 2nd, debian / crunchbang. what's odd, is that in debian the wifi key light is while (enabled) but it's still blocked. if the press the button it turns amber (disabled), if i press it again it turns white again and is actually enabled.
it almost seems like arch is not "catching" the action keypress. the keyboard backlight key works out of the box, and so does the screen brightness keys. but i run xfce4-volumed to control the volume related keys. is there anyway to emulate the hardware keypress to even see if that's the issue?
-----------------[update]-----------------
so i decided to try and enable the rfkill unblock all service:
systemctl enable [email protected]
that alone didn't work, but... i booted into another os, enabled wifi, then hard powered off the laptop. when i rebooted into arch it seems to work now. it's a really hacky work-around. but i'll take it. i'd really like a proper solution, but it works for now i guess.
Last edited by xero (2014-07-24 19:34:53)

Developer key is not functioning for sap netweaver 2004s trail version

hi,
when i was creating a controller class in bsp..its asking for a developer key...i have also extended the license..and i have also used the key which is specified in this page below...kindly refer this link...give me a solution inorder to edit repository objects
http://service.sap.com/sap/bc/bsp/spn/minisap/minisap.htm.

Hi,
check Developer key not valid for NSP ??.
Peter
Points always appreciated

Thumbnails not displaying in SAP BI Mobile app

Hello all,
I have published a Design Studio dashboard to the SAP BI App on Ipad and it's all working fine.
However, I haven't managed to customise an image to be displayed as Thumbnail when displaying all reports in the 'Tile Mode' (as opposed to the 'List Mode')
According to the Mobile App administration guide, I have added the image URL to the Keywords section in the document's properties but it has had no effect on the view (It just shows the tile as an empty white square).
Please see below the details of the environment:
SAP BusinessObjects BI Platform 4.1 Support Pack 2 Version 14.1.2.1121
SAP BusinessObjects Design Studio 1.2
SAP BusinessObjects Mobile App for IPad Version 5.1.8
iPad iOs 7.1
Any help or pointers will be greatly appreciated

Further, you can have a holistic view on content and device support at Content support across devices in SAP Mobile BI
Regards,
Ashutosh

Decimal Places of Key Figure not displaying Correctly

Hi BW Gurus,
I have a key Fig ZLENGTH of type Quantity. I am calculating length in Kilo Meters with this.When I am trying to load the data in my cube with flat file say if value for length is 8.123 Km it is showing in Cube 8.000 . As cklient requirement is for three decimal places I want to show exact value i.e. 8.123KM
Pls. help. Matter Urgent
Regards,
MANDAR

Hi,
in CUNI select LENGTH in front of Units of Measurement, click the button and then double click the KM row to open its properties.
Deciaml rounding should be empty there; if this is the case you'll have to simulate your update in order to see where the system is removing the decimals.
Check that the original record in the PSA has decimals.
Check that the communication structure record has decimals.
Finally the data target record.
It must happen somewhere in the dataflow.
hope this helps...
Olivier.
Message was edited by:
Olivier Cora

Install Number, System Number, Hardware Key

Hi all,
The Install Number, System Number, Hardware Key all are displayed on the help/about form.
Is there any way to retrieve this information using SDK code?
Is there any other security type information that can be accessed such as number of licensed users?
Thanks for any help.

Hi,
You may check these threads first:
Re: Finding Hardware Key
License: Hardware Key
Re: How to get Hardware Key?
Thanks,
Gordon

SAP B 1 8.8.1 PL5 Hardware key issue

Hi All,
As I recently installed SAP B1 8.8.1 PL5 successfully,
We open 'service manager' -> License Manager -> Settings -> Entered Server name
Issues are :
1.No Harware key was displayed below.
2.While clicking on 'Set' button, some message was thrown like : port number is set, you need to install this also on server...
After that we uninstalled the server tools and again tried to install it but system is not allowing to install ST now.
What to do now............What can be the reasons
Please reply if anyone knows the solution.
Thanks and Regards,
Surabhi

Hi Surabhi,
What is the OS you installed. Is it PL0 or PL5 as your subject?
You may check this: cann't see hardware key
Thanks,
Gordon

Subreport not displayed when Run from SAP Business One

We have a crystal report that displays a subreport when it is run from within the Crystal 2008 Designer but not when run from within SAP. Has anybody else seen this error? We have tried importing it into SAP and checking the connections of the report and subreport etc but to no avail.

Sastry,
The main report is a document layout with the sub report linked into it using the DocEntry key field from SAP. The subreport should display data based on that link.
This main report only has the one sub report and when you preview in Crystal it returns data, when you preview using the same criteria but inside of SAP, it is not displayed.
Thanks
Mark

Key is not visible in SQL 2012 R2 when query is read from SAP BI

Hi All,
I have a query in sap bi which has variables where key and text is displayed as per screen shot 1. How ever the same query is triggered from SQL 2012 r2 the key is not visible but text is visible as per screenshot 2 . Could any one suggest how the key will be displayed by there end(SQL).
Thanks,
Payani

I think you're in the wrong space as yor screenshots are not from any Business Objects or SAP BI 4.x products I know.
What exact product are you using ?
this space is for SAP Business Objects products family.

Hardware key for the sap system.

Hi Experts ,
My licence is going to expired within 3 days, i tried to request another key but Hardware key is mandatory.
I tried for Hardware key (HWID) , running the "saplicence.exe" but not found. Tcode 'SLICENCE' is not avialable.
Help me in this.
Thanks
Aisurya.

if saplicense.exe is not found anywhere in your sap directory, then please download the Kernel Stack (SAPEXE_xxx.SAR) from Service Marketplace, as saplicense executable is contained in SAPEXE_xxx.SAR.
http://service.sap.com/patches
- Browse Our Download Catalog
- Additional Components
- SAP Kernel
- <choose your kernel, release>...
- < choose your OS>
- #Database independent
- SAPEXE_xxx.SAR
Regards,
Vincent

License Installation for Multiple Hardware Keys in SAP J2EE Engine

Hi Everyone,
I have a question to ask that we have a Failover setup in our Client Enviornment.
But for SAP JAVA System I am seeing a Problem :
Whenever Failover will happen SAP System will be moved to different Hardware box
which has different Hardware Key.
1) In SAP ABAP Systems we can install Multiple Licenses for Multiple HArdware Keys
so that whenever Failover happens , no need to apply license for that Hardware key
2) But in J2ee System under License Adapter , I am not able to see any option under the same
to install another License
Under Licnese Adpater Service , I am able to see license of J2ee-engine_ora , maintanance_ora & Netweaver_ora licneses
Thanks --
Deepak Gosain

Hi,
Try to paste the two licenses in the same file and then import the license file.
Not sure but give it a try it should work.
Regards,
Vamshi.

SAP NetWeaver 7.01 ABAP Trial / field 'Active Hardware Key' is empty

Hello,
I just installed SAP NetWeaver 7.01 ABAP Trial Version and I am trying to obtain a licence
I log into the system with SAP* user and click on Administer SAP Licenses
I used the transaction code SLICENSE....but then the field 'Active Hardware Key' is empty (so I am not able to request a licence as I have to provide this Hardware key...)
Does anywone have an idea ?
Thanks...

Hardware key should be there in SLICENSE, but anyway you can get that.
Login with <SIDADM> user and execute saplicense -get, it will give you the hardware key. when you receive the License file then you have to install the license from SLICENSE only.
Regards,
Subhash

Hardware key is not displayed in SAP B1 8.81

Similar Messages

Maybe you are looking for