Hardware problem with my iPhone 5 got swapped but not getting warranty

I recently got swapped my iPhone 5 which was having harware issue and was out of warranty with a new device but not getting warranty on new device.
Is this expected or there is some issue due to which I dont see even 90 day complementary warranty?

ok..thanks for your suggestion but my iphone not detected wifi since i received it..so do you think should i go to apple store and ask them to fix it?

Similar Messages

Hardware problem with my iPhone 4s camera! HELP!!!

i have a hardware problem with my iPhone 4s camera, will apple replace it for free?

If the problem is within the terms of the warranty, i.e. it's a manufacturing fault, certainly.

HT4623 i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.

i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.

Have you tried the restart/reset/restore troubleshooting path? That would be the best initial set of steps to take, particularly in a situation like this.

Binary data problem with web services on JRockit but not Sun JDK

I have a problem with binary data in SOAP and JRockit
(jrrt-3.0.0-1.6.0-linux-x64.bin) . I have an set of web services based
on EJB 3.0 which return images as byte arrays inside a SOAP envelope
to be consumed by .NET 2 services. The host app server is Oracle
Application Server 10.3.1 on RHEL Linux update 4, on 64 bit Xeon 5500
series HP blade hardware.
While most images are fine most of the time, one particular image
gives this message when being consumed in the .NET client:
The '■' character, hexadecimal value 0x1F, cannot be included in a
name. Line 2, position 380038.
The MSDN suggests that this is usually caused by non-escaping of reserved XML characters like < but this isn't one of those.
The SOAP looks ok and for the life of me I can't see why this ought to
be a problem, especially since the problem doesn't arise running with
the SUN JDK 1.6_06 64 bit)
When making the same call from the OAS Enterprise Manager, I can make the same call with no problem (but the data is just rendered as character data in a browser) which maybe suggests some incompatibility with how JRockit is serializing the data ?
Any ideas, I would be very happy to hear - JRockit gives a 15% or so
speed boost to the website that these services power so obviously we
want to use it if possible.
Edited by: RichLiv on Nov 14, 2008 4:54 AM

Seems to be the case that using MTOM stops this problem with JRockit. Strange but apparently true (so far).

Problems with artwork displaying in iTunes but not on iPod screen

I have iTunes (7.6) and a 5th gen, 80GB, firmware 1.2.3 iPod.
Not infrequently, I find that a song's artwork is visible in iTunes, but not on the iPod itself. Sometimes the artwork is displayed simply as a black rectangle on the iPod.
The converse situation also sometimes happens - when album info is retrieved from the CDDB, sometimes album artwork is also retrieved - but this is not displayed in the iTunes software, only on the iPod.
And yes, the "Display album artwork on your iPod" checkbox is selected in iTunes.
Does anyone have any more info about this?
Are there any restrictions on image file formats? Maximum size? Type? Interlaced or not?
Last time I asked this question I got zero response
It is an irritating problem, cos there's no way to check what the artwork looks like on the iPod without disconnecting it from my PC :/

OK to drag this thread back on topic:
I think the "sync" thing is irrelevant anyways.
What I tried in the end was viewing my iPod in iTunes,
navigating through to the check box for "display album artwork",
UNcheck it, and click apply.
At this point, iTunes said, with NO confirmation "Are you sure?" dialog, "DELETING ARTWORK ON iPOD" !! :-O I was not pleased
However I then re-selected the "display album artwork" box and clicked Apply. The process took about 10 minutes to complete.
When I then disconnected the iPod, the black squares were gone, and the artwork was NOT deleted (phew!) and was displaying correctly. I was pleased
The amount of "other" megabytes on the display in iTunes for my iPod's contents had shrunk.
I dunno what all this actually did - are the artwork files embedded in the MP4 files on the iPod? Or are they stored seperately and linked to them?
I'm wondering if the "black square" thing is caused by an MP4 having an embedded image, and there also being a conflicting image file elsewhere on the hard drive? But this is just guessing.

Problem with slideshow basic, works locally but not remotely

Hi, I've noticed many threads on this issue and I have tried many fixes but no success. Most seems to revolve around the SpryWidget.js file so I've loaded it directly from AdobeLabs file. In fact, have loaded all .js files directly via my hosting server in case was a problem with binary/ASCII loading through Dreamweaver Mac.
My .js file is here:
http://www.keishahulsey.com/Spry-UI-1.7/includes/SpryWidget.js
And this is the page I'm having problems with...
http://www.keishahulsey.com/thesis/MA-2-10.php
I so rarely post on these forums only read them but am desperate. Would greatly appreciate any help as this is my presentation website for thesis due in one week.

The link to the main images is incorrect.
If I go to http://www.keishahulsey.com/_images/_slideshows/thesis-1-60/160smithfield1.jpg, I see the thumbnail, but if I go to http://www.keishahulsey.com/_images/_thesis/_content/1-60-smithfield-1.jpg, instead of the main image, I get a page with markup.
Simply correct the path and all is well.
Gramps

Weird problem with my GPU being installed but not used by windows.

I have a problem with my graphics card.
I have an integrated Intel HD Graphics gpu, that Windows recognised and installed the driver thereof.
The problem is, Windows doesn't use this gpu, but uses his own Microsoft Basic Display Adapter.
I'll provide some screenshots here:
http://i.imgur.com/ncKoU3g.png
http://i.imgur.com/XkeMWL3.png
http://i.imgur.com/m31Wo5h.png
http://i.imgur.com/kSlpUvY.png
http://i.imgur.com/atMh00p.png
Ps: Don't answer with the reply of "Have you updated your drivers yet", because I've done that over a thousand times already.
Thanks in advance!

Is there any solution for the above query. I called HP customer care. But it seems that they accept calls only on weekdays.

I have a problem with my Iphone 5 all sounds not working

sounds not working at all with my iphone 5.

Hi Ali147,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Hope this helps ....
Judy

HT4113 anyone else have a problem with the iphone 4s locking and not able to unlock even though you keep entering the only code that you have used?

Anyone else having a problem with the iphone4s locking and not letting you in even though you keep using the only code you have entered from the begginning?

No. You are the first person out of 900 million users to have this problem.

Problem with SMTP from one computer but not another

I have an iMac connected directly to my network via Ethernet and a MacBook Pro which connects via wireless. I have a program installed on my iMac that sends me alerts via e-mail, and it works just fine. When I try and use Mail, however, on my MBP with the exact same settings and credentials, it fails. To make this even more perplexing, Mail works fine from my office on a different network.
To work around this, I use Comcast's SMTP server on my laptop, but why would my regular e-mail provider's SMTP work on one machine and not another on the same network? The only difference is one is connected via Ethernet and the other by wireless.
I use a Time Capsule as my router and wireless access point. Has anyone got an idea about what's causing this?

Please report the relationship, if any, of the "regular e-mail provider's SMTP" and your ISP? If Comcast is your ISP, they regularly block use of Port 25, but if you have selected Use Default Port in Mail Preferences/Accounts/Account Information for the Outgoing Server, then it may be making the wrong choice to work with Comcast. Regardless of the ISP, for this regular account click on the arrows beside the name of the SMTP, choose Edit Server List, then click on the Advanced Tab that will then be seen and choose Use Custom Port, then enter the proper port directly -- that port is probably Port 587, but that could depend on the advisory of the email provider for using their SMTP.
Ernie

Problem with WiFi on one netbook but not the other

I have a curious problem in that I am able to connect and browse via the wireless network on one netbook using the home hub no problem, but another netbook connects the wireless network but does not allow me to browse. Curiously it works no problem on ethernet. The netbook with the problem is running Windows 7 Home Pro with Microsoft Essentials as the AV protection. The netbook without the problem is running Windows XP Home Pro with AVG.
I have tried all sorts from rolling back Windows updates, reinstalling the wireless device drivers, refreshing/flushing dns and various command prompts but nothing seems to work.
I took the netbook away and tried connecting to another wireless network and it worked straight away no problem which leads me to believe it is a dns issue with the BT connection on my netbook.
I have enclosed the IPCONFIG for both the wireless and ethernet connection in case anyone can spot anything and make suggestions...
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Samsung>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Samsung-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek RTL8192E Wireless LAN
802.11n PCI
-E NIC
Physical Address. . . . . . . . . : 00-26-B6-86-AA-8C
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d578:aa58:5b09:e6a5%16(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.64(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 03 November 2012 09:18:19
Lease Expires . . . . . . . . . . : 04 November 2012 09:18:19
Default Gateway . . . . . . . . . : 192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 285222582
DHCPv6 Client DUID. . . . . . . . :
00-01-00-01-17-E0-DE-2A-00-24-54-3B-6C-E9
DNS Servers . . . . . . . . . . . : 192.168.1.254
192.168.1.254
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Bluetooth Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Bluetooth Device (Personal Area
Network)
Physical Address. . . . . . . . . : 0C-60-76-FF-A0-3B
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
Physical Address. . . . . . . . . : 00-24-54-3B-6C-E9
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::5964:d9f5:c44:93d7%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.71(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 03 November 2012 09:19:31
Lease Expires . . . . . . . . . . : 04 November 2012 09:19:31
Default Gateway . . . . . . . . . : 192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 234890324
DHCPv6 Client DUID. . . . . . . . :
00-01-00-01-17-E0-DE-2A-00-24-54-3B-6C-E9
DNS Servers . . . . . . . . . . . : 192.168.1.254
192.168.1.254
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{7C28E484-E7CB-44B8-A9E7-1F985D74D99A}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes

Wireless connections are classed as public by default, so file sharing and network discovery is disabled.
You have to change your wireless connection so that it is in the Private network classification.
I cannot remember how to do this, as its a while since I played around with a Win 7 or Vista laptop.
Any settings only affect the actual wireless connection you change, so if you access public wifi, then that will be classed as a public network, and file sharing will be disabled.
Ethernet connections are usually assumed private.
I am sure a Google search will tell you more, if its not in Windows help.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

RemoteFX Display problems with Windows 8.1 VM but not with Windows 7 VM running on Hyper-V VDI Server 2012R2

Has anyone seen anything like this?
After many, many, hours of wading through and eliminating potential variables the issue has been narrowed down to being present with a Windows 8.1 VM and not on Windows 7 VM.
The problem is with glitchy display issues (Random Pixellation, Fuzzy Screen areas, Entire Screen filled with random shapes/colors etc.).
This is a Server 2012 R2 environment it is running Hyper-V Remote Desktop Virtualization Host.
An Nvidia Quadro K2200 adapter has been enabled for RemoteFX and passed through.
Also have tried Nvidia Grid K2 adapter. Both adapters use same driver set and multiple driver versions have been tested.
Two Generation 1 VM's have been created. One for WIndows 8.1, One for Windows 7. All updates installed.
Each VM uses the same set of Hyper-V resources, Virtual Switch etc. (The settings for each VM are the same).
With RemoteFX disabled on each VM the issue is not present on either VM.
With RemoteFX enabled on each VM the issue is present on the Windows 8.1 VM and not the Windows 7 VM.
There is no difference if only one VM at a time is enabled and running. (Not GPU load related)
Talmage D. Holt

Hi,
Generation 2 virtual machines have a simplified virtual hardware model, and supports Unified Extensible Firmware Interface (UEFI) firmware instead of BIOS-based firmware. The majority of legacy devices have also been removed from generation 2 virtual machines.
You can check below article might helpful for your case.
Generation 2 Virtual Machine Overview
https://technet.microsoft.com/en-us/library/dn282285.aspx
RemoteFX vGPU Improvements in Windows Server 2012 R2
http://blogs.msdn.com/b/rds/archive/2013/12/04/remotefx-vgpu-improvements-in-windows-server-2012-r2.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

RemoteFX Display problems with Windows 8.1 VM but not on Windows 7 VM. Both running on Hyper-V VDI Server 2012R2

After many, many, hours of wading through and eliminating potential variables the issue has been narrowed down to being present with a Windows 8.1 VM and not on Windows 7 VM.
The problem is with glitchy display issues (Random Pixellation, Fuzzy Screen areas, Entire Screen filled with random shapes/colors etc.).
This is a Server 2012 R2 environment it is running Hyper-V Remote Desktop Virtualization Host.
An Nvidia Quadro K2200 adapter has been enabled for RemoteFX and passed through.
Also have tried Nvidia Grid K2 adapter. Both adapters use same driver set and multiple driver versions have been tested.
Two Generation 1 VM's have been created. One for WIndows 8.1, One for Windows 7. All updates installed.
Each VM uses the same set of Hyper-V resources, Virtual Switch etc. (The settings for each VM are the same).
With RemoteFX disabled on each VM the issue is not present on either VM.
With RemoteFX enabled on each VM the issue is present on the Windows 8.1 VM and not the Windows 7 VM.
There is no difference if only one VM at a time is enabled and running. (Not GPU load related)
Does anyone have any ideas?
Talmage D. Holt

Hi,
Generation 2 virtual machines have a simplified virtual hardware model, and supports Unified Extensible Firmware Interface (UEFI) firmware instead of BIOS-based firmware. The majority of legacy devices have also been removed from generation 2 virtual machines.
You can check below article might helpful for your case.
Generation 2 Virtual Machine Overview
https://technet.microsoft.com/en-us/library/dn282285.aspx
RemoteFX vGPU Improvements in Windows Server 2012 R2
http://blogs.msdn.com/b/rds/archive/2013/12/04/remotefx-vgpu-improvements-in-windows-server-2012-r2.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Problem with Color Ghosting in CS6 but Not CS4 ?

I have HD Footage from my Canon HV30 camcorder and when I open a project and edit the video in CS4 there is no color Ghosting, but when I open a project with the same source files and project settings in CS6 I get a nasty color ghosting. Has anyone seen or experience this issue before? I have included and example of the same frame in each of the programs.
Help!!

Unfortunately I don't have another camera with HDV output. I could borrow another camera but it would be AVCHD.
I'm not sure about any issues with the media and if there is a way to get this in front of a developer type person who would be knowledgable about the differences in how PP CS4 converts HDV source into a digital file vs how PP CS6 converts the HDV source into the digital file. Does the PP capture process use a hard coded CODEC that is different between CS4 and CS6?
I work in telecom and there is a huge effort to comply with standards, but interoperability is still a big issue even when there is a common governing standard.
Because my PP CS4 software converts and displays the "Standard Compliant" source media properly (without any Ghosting/Interlace artifacts) my experience troubleshooting technical issues tells to ask the question "What changed between things working and things not working?" I am drawn to focusing on the difference introduced with CS6.
As addressed earlier in this thread, it could possibly be interaction with display drivers (ruled out with updated drivers and because the exported files have the issue as well?). It could have been an issue with not having the latest PP CS6 software (eliminated with software update). The only thing I have left is an interoperability issue with either my camera output having some varient in standard compliance that is causing the issue or the PP CS6 software having some issue in interpreting or processing the streaming media input that PP CS4 did not have.
So for my situation, here are the specifics: I am using a Canon HV30 Video camera set for 1080i 30p HDV format to tape. Within the camera I have it set for shutter priority, at 1/250 Shutter speed. Now we know there are ~30 frames per second so this faster "shutter speed" must be interpolated/converted to blend into the 30 frames.
To replicate/test the situation I would need (or someone else with one) a Canon HV20, HV30, or HV40 setup with the same shutter vs aperture priority recording some fast moving action.
My bottom line is I really like working in PP CS6 and don't want to have to stay in CS4 because of this issue. Any ideas how to escalate this issue to the developers or any other ways to move towards a resolution?
Thanks,

Problem with gross requirement planning pir is not getting reduced

Dear Gurus
I am trying to use strategy 11 for a particular finished product.(having bom and routing)
In the material master I have set mrp type pd lot size ex .strategy group 11, mixed mrp 2,item category group norm, availabilty checking group 02 .
Then I made manually pir for that material in md61 with BSF requirement type .
Then ran the mrp for that material in md02.
Planned orders came .(In md04 screen that gross requirement line text also came as usual )Converted them to prodn order and then did the gr in mb31 with 101 mvt type. After doing the gr the pir should get reduced in md04 screen which is not happening . Where I am going wrong
Regards
Sandip Sarkar

Dear Sandip Sarkar,
                                  It usually happens run MRP and ckeck.
Strategy 11 in summary :-
1. Sales Order creation - no impact.
2. Goods Receipt - minus the quantity for the oldest planned independent in demand management.
   For e.g. if PIR is 100 and delivery 90, PIR becomes 10 (withdrawal 90).
3. Delivery - no impact as delivery is issue from sales order.
This strategy is particularly useful if you need to produce, regardless of whether you have stock or not. For instance, steel or cement producers might want to use this strategy because they cannot shut down production; a blast furnace or a cement factory must continue to produce, even if this means having to produce to stock.
You need to maintain the following master data for the finished product:
Maintain strategy group 11 on the MRP screen.
Set the Mixed MRP indicator to 2 on the MRP screen.
Maintain the item category group (for example, NORM) on the Sales Organization screen.
Maintain the Availability check field so that you perform an availability check without the replenishment lead time (checking group 02 in the standard system).
Strategy                                                        10
Stock is taken into account                           Yes
reduction of planned independent
requirements takes place during u2026   u2026 goods issue for                                                                                delivery                                  order (discrete production),
11
Stock is taken into account                          No
Reduction of planned independent
requirements takes place during u2026            ... goods receipt for a production
                                                                        order (discrete production),
for a planned order (repetitive
                                                                         manufacturing), or for a purchase
                                                                         order (trading goods).
Edited by: Vachanala Rajasekhar on May 7, 2010 11:55 AM

Hardware problem with my iPhone 5 got swapped but not getting warranty

Similar Messages

Maybe you are looking for