Hardware req.

I am just about to replace my current oracle software with an 8i database combined with designer 6i and the Forms/Reports developer server software with Webdb 2.2.
I've managed to chew through most of the install documentation.
But is there anybody out there with experience of having all these products on the same box with respect to minimum hardware reqs and performance.
My laptop is running on NT 4.0 sp6 and after removing all the present oracle software I should have +/- 3.5 gB free space on my HD partition. There is a 465 pentium CPU with 128 mB RAM installed.
I read that if you make use of some of the java functionality in 8i, 256mB Ram is required and the same for some of the extra functionality in designer(e.a dependency manager).
Should I think about upgrading the memory first...?
Any suggestions would be appreciated.
Regards
Dave.

Do you have installed the database in a separate machine?
If yes, Apache/mod_plsql running in standalone mode do not require a lot of memory.
Apache on windows NT platform uses only 2mb of ram, I don4t know how many memory uses mod_plsql, but IMO it uses the same memory like other mods of Apache.
Best regards, Marcelo.
PD: Look at the parameter of mod_plsql about the concurrent sessions accepted which by default is 10, you has to increase this value to 100. In the other hand, this parameter gets a database connection which you has to increase to 100 too.

Similar Messages

Client side NWDS Hardware Req after ESS Track import.

Hi,
I have imported the ESS Web Dynpros into my NWDS using the ESSTracks mentioned in the cookbook.
But after this import of ESS Web dynpro, my PC has become very slow (when i open NWDS). Even expanding the project tree in NDWS takes lot of time...
I am having 512 RAM.
Please let me know what are the minimum hardware req. for Working withthe SAP Standard DCs in NWDS? How much mem is required?
Is there any note available or SAP document for this?
Regards
Gaurav Gandhi

Hi Venkat & Siddharth,
Thanx for the reply.
I do restarted the my PC everytime but again after sometime after opeaning NWDS, my PC becomes slow.
My PC satisfies all the requirements as mentioned by Venkat, but still it becomes very slow.
Venkat: Do you have some note or some doc which says this all...
Right now since i am the only person in my team who has copied the DCs in NWDS but this is the condition of my PC, then what will happen if all the other developers also configure there NWDS for JDI & DTR?
None of our work will be finished on time with such a speed..:-(
Regards
Gaurav Gandhi

Minimum Hardware req of SUN Solaris with ECC 6.0

hi all
can anyone tell me what is minimum requirement of hardware of SUN Solaris with ECC 6.0
i serach out in marketplace but didn't get the answer.
so any one can solve my problem
rgds
aftab

Hi Aftab,
Once you finish with Sizing and always recomended you contact SAP-SUN Competent Center with your Quick Sizer Project reference. They will always help you to do the final sizing..
Check the following links
https://websmp210.sap-ag.de/quicksizing
http://www.saponsolaris.com
Hope these info. will help in this regards.
Regards
Rayees Palot

Hardware req. running Apache with mod_plsql

I'm trying to find out hardware requirements for running an Apache server with mod_plsql on Windows NT/Windows2000 serving about 100 concurrent users. I've been redirected to "Oracle HTTP Server powered by Apache Performance Guide", but this document does not cover mod_plsql.
Any help out there?

Do you have installed the database in a separate machine?
If yes, Apache/mod_plsql running in standalone mode do not require a lot of memory.
Apache on windows NT platform uses only 2mb of ram, I don4t know how many memory uses mod_plsql, but IMO it uses the same memory like other mods of Apache.
Best regards, Marcelo.
PD: Look at the parameter of mod_plsql about the concurrent sessions accepted which by default is 10, you has to increase this value to 100. In the other hand, this parameter gets a database connection which you has to increase to 100 too.

Hardware reqs for Oracle Database

My friend is planning to buy a PC and run Oracle database on it in workstation mode.
Wht is the best choice for him...a P4 HT/nonHT or Athlon64 or Athlon XP?
How much RAM is needed for good performance?
Thanks.

Hi
I use P4 with XP pro at home and P4 with 2000 pro at work as a test env.
both work just fine.
as for HT Oracle is HT aware, i recommend a min. of 512 RAM so you wont use paging or disk space as memory, since XP and 2000 needs min 128 you'll have a 128 MB for oracle to use as you like.
Regards
Tony G.

Enough hardware

Viewing multiple video clips in PPro is slow, choppy, stops rendering, and frames are routinely dropped. My desktop PC seems decent; not sure if my hardware is too slow? Here's what I got. Should this be enough or should I change anything out?
I'm on CS4 and using winxp with current service packs. This happens with and w/o 4.1 installed
Dell dimension 8400
Processor, 80547, Pentium 4 Prescott DT, 3.4GHZ, 1 MEGB 800FSB
RAM 3gb
Card, Graphics, 128, radeon X300, Server Enhanced, MRMGA8
Intel ATA/ATAPI controllers (dma enabled)
Hard Drive, 80GB Seagate Barracuda ATA 7.2K, st380013as - USAGE OS
Hard Drive, 500GB, Seagate Barracuda ES SATA 3.0Gb/s, st3500630ns, - USAGE media cache db
Hard Drive, 1.3 tb Netgear readynas (x-raid, 4 500gb st3500630ns) - USAGE mass storage
Video plays OK via windows media player.
Thanks.

Video is from -> Sony DCR-SR42
720x480, 29.97 fps, stereo
MPG output(Video Codec:MPEG-2 Video, Audio Codec: AC3/AC3)
Based on the various postings/docs written up on hardware reqs for PPro, I think I’m in the ballbark for DV media.
When I watch task manager, my cpu’s are getting pegged after a minute or two of rendering. This makes me believe a video card would help with more memory (currently 128mb) to help the cpu. But there are too many video card options and I don’t want to waste money on hardware that doesn’t make things perform better.

Is there a way to CAPTURE audio/video off the net then run it m.m. prsntn

I'm fairly new to the mac genre. In windows we had apps like Camtasia to
capture audio/video off the net. I was hoping something like that would
be avail for the mac and then once capture it how would I edit it and
include it in a presentation software; for example, keynote?
Is there added hardware req'd (?Capture board)? what would be a good software mac
compatible?

I'd like to capture audio and video for example sometimes just need to capture the
audio if some instruction is coming say over a quicktime or media player for my work.
Then sometimes I need to capture the audio and video when they ware actually showing me
charts and explaining them things like that.
is snap Z the way to go then for quality and fair pricing to get good results.
Do we have any resident applications already on the ilife variety that could be utilized for
something like this or is the only way to go through a 3rd party vendor?

Case study: "Large?" labview programs flooded with different VIT's

Case study: "Large?" labview programs flooded
with different VIT's
Type of application:
Computer with loads of individual hardware connected or other software (either
onsite (different buses) or offsite (Satelite/GSM/GPRS/radio etc.).
Hardware
description: little data "RPM" but communications to all devices are intact.
More "RPM" when many VITs are involved.
Size: 1000+
VITS in memory (goal). Total software has been tested and simulated with 400.
I'm posting
this post after reading this thread (and actually I cant sleep and am bored as
hell).
Note: I do
not use LVOOP (but sure post OOP examples, am starting to learn more and more
by the day.)
Things I
will discuss are:
Case 1: Memory usage using a plugin
architecture
CASE 2: memory usage using VITs (!)
CASE 3: updating datastructures:
CASE 4: shutdown of the whole system
CASE 5: stability & heath monitoring
CASE 6: Inifiles
CASE 7: When the hardware is getting crappy
Total
application overview:
We have a
main application. This main application is mainly empty as hell, and only holds
a plugin functionality (to register and administer plugins) and holds an
architecture that holds the following items:
Queue state
machine for main application error handling
Queue state
machine for status messages
Queue state
machine for updating virtual variables
Event state
machine for GUI
Some other
stuff
Other
global functionality is:
User
logins, user configurations and unique access levels
Different
nice tools like the good old BootP and other juicy stuff
Supervision
of variables (like the NI tag engine, but here we have our own datastructures)
Generation
of virtual variables (so that the user can configure easy mathematical
functions and combining existing tags)
Licensing
of plugins (hell we free-lance programmers need some money to don't we?)
Handles
all communication between plugins themselves, or directly to a plugin or vice
versus.
And now we don't
talk about that (or marketing) the main application .
Message Edited by Corny on 01-20-2010 08:52 AM

CASE 3: updating datastructures:
As we do NOT use clusters here (that would
just be consuming) we only use an 1D array of data that needs to be updated in
different functional globals. If the the number of VITS exceeds so that the
updating of this datastructures becomes the bottleneck, this would cause
delays. And since in this example we use 250 serial interfaces (lol) we do not
want to disrupt that by any delays. When this happends, does anyone know a good
solution to transfer data?
A thought:
perhaps sending it down to the plugin and let the plugin handle it, this should
save some time, but then again if more VITs are added again this would become a
bottleneck and the queue would fill up after a while unable to process it fast
enough. Any opinions?
CASE 4: shutdown of the whole system
Lets say we
want to close it all down, but the VITs need perhaps to do some shutdown
procedure towards the hardware, that can be heavy.
If we ask
them to shutdown all together we can use an natofier or userevent to do this
job. Well, what happends next is that the CPU will jump to the roof, and well
that can only cause dataloss and trouble. The solution here was to let the
plugin shut them all down one by one, when one has been shutdown, begin at the
next. Pro; CPU will not jump to the moon. Con's: shutdown is going to take a
while. Be ready with a cup of coffee.
Also we
want the main application not to exit before we exit. The solution above solved
this as the plugin knows when all have been shut down, and can then shut itself
down. When all plugins are shutdown - the application ends.
Another
solution is to use rendovous (arg cant spell it) and only shut the system down
when all rendezvous have met.
CASE 5: stability & heath monitoring
This IS
using a lot of memory. How to get it down. And has anyone experienced any
difficulties with labview using A LOT of memory? I want to know if something
gets corrupt. The VITs send out error information in case, but what if
something weird happens, how can I surveillance all the VIT's in memory to know
one is malfunctioning in an effective way/code (as backup
solution so the application knows
something is wrong?
CASE 6: Inifiles
Well, we
all like them. Even if XML is perhaps more fahionally. Now Ive runned some
tests on large inifiles. And the labview Inifile functions use ages to parsing
all this information. Perhaps an own file structure in binary format or
something would be better? (and rather create an configuration program)?
CASE 7: When the hardware is getting crappy:
Now what if
the system is hitting the limit and gradually exceeds the hardware req. of the
software. What to do then (thinking mostly of memory usage)? Needing to install
it on more servers or something and splitting configurations? Is that the best
way to solve this? Any opinions?
Wow. Time for a coffee cup. Impressive if someone
actually read all of this. My goal is to reach the 1000 VIT mark.. someday.. so
any opinions, and just ask if something unclear or other stuff, Im open for all
stuff, since I see the software will hit a memory barrier someday if I want to
reach that 1000 mark hehe

Cannot connect to Oracle XE - install on Mandrake 2005

Hi!
Downloaded Oracle XE and attepmted an install on my home computer running Mandrake 2005. At first it complained about missing libaio so I downloaded and installed latest Fedora rpm. Without problems. Then it happily installed, although at one moment it complained the machine does not meet minimum requirements (only 217Mb memory, hmm why I thought I have 256?). It installed otherwise fine. I run configuration scripts - default ports, system password, start at boot - yes. So far so good.
It created a shortcut for "Getting Started" page on my desktop, but would not make any menu items. OK, after all its not a supported distro. So I pointed Firefox at http://127.0.0.1:8080/apex and got connection refused.
Checked. Process oracle-xe is running. I can start and stop it. Listener is up and listening. There is no firewall whatsoever - we're sitting on a dialup here. Tried to connect as root, no candy. Ahh, yes, I should mention that even if memory is lacking there is about 800 megs of swap and ample diskspace too, so other hardware req's should be OK. So everything is almost like it should. Except that I cannot connect. So can you tell me what else to check and what to try?
Wahur, database newb

Oracle XE has it's own forum - to register and discuss XE problems with XE experts use URL http://www.oracle.com/technology/xe/registration
Once you have registered, you can sign in to the forums and voila - the link to the XE forum is there. But you do have to sign in.

Dowloading Panasonic VDR-D100 Camcorder to iMovieHD '06

Does any body know how I can download video recorded material from my D-VDR-D100 Camcorder to iMovie HD '06? No firewire. Has only USB

welcome ben to the  boards ...
your device is a DVDcorder, which isn't supported by iMHD≤6 ... needs to be, as Klaus allready stated, a firewire connected miniDV ..
two options:
purchase iLife08 .. (be sure, your Mac fullfills hardware req.)
or, finalize disk in camera and search this board for 'DVD Import'.
If your device uses non-standarded sized disk, don't stick into slot-in drives!!!

Difference between Hyperion version 11.1.1.3 and epm 11.1.2.1

Hi,
Can anybody suggest me the difference between Hyperion version 11.1.1.3 and EPM 11.1.2.1?
Thanks In Advance

Take a look at the “Installation and Configuration Guide.”
log file..start the server and see the log file
The 11.1.2.1 release also includes new features for upgrading from previous versions. There are several new utilities and enhancements to make the upgrade process easier. You will see some of these new features during the configuration of the various products
Apart from diffrance
Ima not sure y Windows 2008 support in Hyperion 11.1.2 brought with it a host of new challenges..(atleast to make copyrighted windows copys now onwards lol)
Windows 2008 introduced a new feature called User Access Control (UAC). while installing person need to have admin privillage other wise it HELL (nightmare ) and some unexpectedly problematic issues though security is good but .................
Have a read on this
oracle-hyperion-epm-system-certific-131801.xls(google u will get it) at least u get some idea what are new hardware req and software reqs
Some Support answers as well
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=TROUBLESHOOTING&id=1313155.1#aref3
hope u get some idea

Creative Ultra TNT2 (32MB) Card Problem

I could not find the card driver in kdmconfig as the hardware req doc mentioned I should. How can I add the driver?
I used nVidia TNT2 driver instead, which gives me a black screen with the help window and file manager window opened but with no manu bar, so I can not either move or resize them. in addition, I can not see manu on the bottom of the screen or manus with the right mouse click.
However, when I log in use openwindows, there is no problem.
Please help.

I followed your instruction installed patch 109401-09 with another required 110959-01, the other 3 patches did not install because they are for Solaris 7?
anyways, it still doesn't work, any more ideas why?

Macbook pro mid 2012 very slow - hardware?

Hi there,
usually all challenges I have to face with my apple devices are pretty solvable with google but this one brings me to despair. Perhaps somebody can help me out.
The situation:
Since I started to use apple devices I am using a MBP Mid 2009 and besides that it is a little bit slower than in it's first days it works like a clockwork. My girlfriend (also working in the IT industry and knowing how to treat a computer) has the problem that her MBP Mid 2012 was extremely slowing down three weeks ago. It was getting so slow in a few day that every click she does results in a minute of watching the beach volleyball of doom.
Due to the fact that every action on the GUI was enormous fast and every action taken which demands data from the hard drive was causing the beach volleyball, made me think that there has to be an error on the hard drive. (originally intern drive: Toshiba)
It turns out that it wasn't that easy to solve, here is what we did:
First approach was:
Resetting the RAMs
Repairing the access rights of the hard drive and all the stuff you can find on google.
I tried to boot from recovery and format the internal hard drive
here was the problem that we weren't able to format the partition.
also trying to use time machine resulted in an error and wasn't able to finish
Next thing: I installed another hard drive (Western Digital) on the internal sata port which worked fine for about 3 years in my macbook and was, until I formatted it for it's new purpose, working very fine as external drive.
additionaly I build a Yosemite boot stick to reinstall it on the WD HDD.
I wasn't able to reinstall Yosemite using the boot stick and trying to install the OS while the WD drive was attached to the internal sata port.
next I changed the drives back: Toshiba internal, WD fresh formatted by my MBP Mid 2009 external
next I tried to install Yosemite freshly on the WD which was now attached over USB and that worked very well and the MBP Mid 2012 was running like new although that I accessed the HDD over a slow USB port.
The next step was the following: I used the latest time machine backup on the WD drive while it was attached external over USBthat worked very well
After that I did the following: I changed the drives back: WD with time machine backup internal, Toshiba drive attached over USB external.
first I tried to boot from the internal port which had the WD drive attached. That resulted in a gray screen with an crossed circle.
next I tried to boot over the USB port the original unchanged Toshiba drive. That worked great and there was no sign of the beach volley ball.
In my eyes that excluded the fact that the Toshiba hard drive has any hardware damages.
After that I was calling the apple customer service but they had also no clue what the problem could be.
I told them that I suggest an hardware error between the hard drive and the logic board
The only advice they had for me was to deactivated Filevalt on the Toshiba drive
So I deactivated Filevalt and changed back the Toshiba drive on the internal sata drive.
For the very first moment the problem seemed to be solved.
After about 1 hour of usage the behavior was back and the MBP wasn't able to use again.
So my last approach on the problem was the Apple Hardware Test (AHT)I was running the test normal and in extended mode and both times it told me no hardware errors found.
So long story short the questions:
If AHT sais no hardware problem found, could there anyhow a damaged part?
Has anyone any suggestion what I could do to solve this damned problem?
Thanks for reading and thank you very much vor any kind of advice or hint.
Greetings from Germany

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' /\.framework$/&&!/\/Contents\// { n++;print;} END { if(n<400) print "/System/";} ' ' { gsub(/[()"]/,"",$3);print $3;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2 x\1/p;' 's/Pr.+n //p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-onlyin / kMDItemContentType=com.apple.framework|sort' -name\ kMDItem${p[35]} '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' '-app Safari UserStyleSheetEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Frameworks I/O errors Stylesheet );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D13 5 58 71 59;D13 5 54 72 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B4 4 22 69;A1 24 56 32;B7 22;B2 23;A4 39 57 70 23;B2 24;B6 23 24 4;C3 58;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 59 35 60;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Req approval process

Hi Gurus,
can anyboidy please tell me the steps in the req approval process. Thiis is the way it has to be setup
As we discussed, I need to add the following approval matrix in SAP for approval of It related items in SAP. Please let me know if you have any questions.
Department            Level 1 approval (1,000 to 5,000)         Level 2 approval (5,000 and higher)
ARX u2013 Hardware               abcd                                                                           xxxxx              ARX u2013 Software                xxxx                                                                       xxxxxx
ARX u2013 SAP                         xxxxx                                                                    xxxxx
Thanks
Anusha

Hi Anusha,
refer to the link below,
http://www.sap-basis-abap.com/sapmo017.htm
If additional info is required revert.
Regards,
Vivek

Migration of old system with new version and 64bit hardware

HI Sapguru's,
Our req: Build New CRM system with all latest version of software & 64 bit hardware. Details mentioned below.
Old System:
CRM 4.0 ABAP System
win 2003
Oracle 9i
non-unicode
32 bit hardware
New System( which i want to build):
CRM 5.2 (rampup version) ABAP+JAVA
win 2003
Oracle 10g
Unicode
64 bit hardware
Above mentioned is an new requirement for us.
Our Plan:
1. Old system -Conversion from non-unicode to Unicode system
2. Old system - System copy export method for create exports
3. Build New system with new unicode version(5.2) with Old system exports
Questions to Sapguru's:
1. Our plan will work or not?
a. If Yes - give me the guidelines ,Notes ,documentation paths
b. If No - Please provide your opinions/advices
2. 32 bit exports will work on 64 bit hardware SAP system?
Thanks Advance.
Regards,
Ramu,

Hello Markus,
Thanks for your quick response!!!!
I understood - what you have mentioned for my question but i have one clarification on your answer and one new questions to you.
Clarification:
My oldsystem is non-unicode system. As you said i will do system copy export method on old system(non-unicode) then i will use that exports(non-unicode) to build new system.
Here my clarification is:
Will that exports(non-unicode) work while installing new system with unicode? or Will it give any problem?
Question:
1. will old system with oracle 9i exports work on new system with oracle 10g?
Thanks Advance,
Bhaskar Rapelli

Hardware req.

Similar Messages

Maybe you are looking for