Hardware requirement for cisco Prime NCS 1.1
Hi,
Am not sure if the datastore for NCS1.1 soft appliance has to be thick provisioned or thin provisioned? the installation guide say pick thick provision. not clear if this is a must. for exaple in case of Cisco Secure ACS5.3 it clearly states it has to be thick provisioned. where can i find a documnetation for NCS1.1 clearly stating the requirement. without this, hard to convice the storage team.
thanks,
Kerim
http://www.cisco.com/en/US/products/ps10315/products_tech_note09186a0080bba943.shtml#req
hope this helps
Similar Messages
-
Cisco Prime LMS appliance Compatibilty with Cisco Prime NCS
Hi,
Is it possible if we can install Cisco Prime LMS 4.2 in the appliance which is inbuilt with Cisco Prime NCS .
We have PILMS42-1.5K-U license available with us.
Rgds,
KamalOne can install either LMS 4.2 or NCS on the a physical (software on PRIME-NCS-APL-K9 hardware) or virtual appliance (software installed on customer-provided VM).
The two products (NCS and LMS) cannot coexist on a given appliance instance. This is due to change in the future as LMS and NCS merge under the Cisco Prime Infrastructure 2.0 release but for now they are distinct and separate products with a common approach and similar look and feel but requiring separate servers, whether physical or virtual.
Please refer to the ordering and licensing guide here. -
Cisco Prime NCS 1.2.1.012 nms stopped
Hi all,
Got an issue with nms server stopped, it is the full 3300 appliance not a vm, have tried:
1.
ncs stop
ncs cleanup
ncs start
2.
ncs stop
ncs redidb ( off the top of my head can't remember exact command for that one)
ncs start
3.
tried reboot after ncs stop
Getting this ouptu on ncs start:
As first time is not present - removing .dbCreated
Starting Network Control System...
Unable to verify hardware.
This may take a few minutes...
Also on ncs start verbose getting a massive error:
Processing Service Name: NMS Server
Remoting 'Matlab Server' started successfully.
Starting NMS Server
Checking for running servers.
Checking if DECAP is running.
00:00 DECAP is not running.
00:00 Check complete. No servers running.
00:11 DECAP setup complete.
Creating the DB schema
Removing configuration folder on DB clean
DDL execution of the script /opt/CSCOlumos/bin/aems_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/aems_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/compliance_engine_schema.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
tup.
DDL execution of the script /opt/CSCOlumos/bin/compliance_engine_schema.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting X
MP startup.
DDL execution of the script /opt/CSCOlumos/bin/cr_proc_drop_part.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/cr_proc_drop_part.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
tup.
DDL execution of the script /opt/CSCOlumos/bin/disableStats.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/disableStats.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_ca_exclude_list.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_ca_exclude_list.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP st
artup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_ca_mainpage_view.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_ca_mainpage_view.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP s
tartup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_indexes.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_indexes.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_foundation_system_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP
startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_foundation_system_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exit
ing XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_ipsla_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_ipsla_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
tup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_ipsla_default_data.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP st
artup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_ipsla_default_data.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting
XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_lt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_lt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
tup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_lt_sp.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_lt_sp.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP start
up.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_mt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_pm_mt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
tup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_syslog_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_syslog_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP sta
rtup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_system_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_sam_system_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP sta
rtup.
DDL execution of the script /opt/CSCOlumos/bin/ifm_swim_default_repo.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup
DDL execution of the script /opt/CSCOlumos/bin/ifm_swim_default_repo.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP
startup.
DDL execution of the script /opt/CSCOlumos/bin/job_schema_update.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/job_schema_update.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP star
tup.
DDL execution of the script /opt/CSCOlumos/bin/ncs_api.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/ncs_api.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/wcs_dropFKs.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/wcs_dropFKs.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/wcsutils.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/wcsutils.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/wda_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/wda_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/wirelessAlarmSpecificId.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP start
up.
DDL execution of the script /opt/CSCOlumos/bin/wirelessAlarmSpecificId.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XM
P startup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_credential_mgr_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startu
p.
DDL execution of the script /opt/CSCOlumos/bin/xmp_credential_mgr_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP
startup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_fingerprints_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_fingerprints_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP s
tartup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_preference_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_preference_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP sta
rtup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_quartz_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_quartz_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup
DDL execution of the script /opt/CSCOlumos/bin/xmp_rbac_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_rbac_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_usermgmt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP startup.
DDL execution of the script /opt/CSCOlumos/bin/xmp_usermgmt_ddl.sql failed. Please check the log file /opt/CSCOlumos/logs/ddl_log.log. Exiting XMP start
up.
Any ideas ?Hi Ben:
There are .iso images for both Prime Infrastructure 1.2.1 and the current release, Prime Infrastructure 1.3.0.20 that can be downloaded and burned to a Dual Layer DVD (in a Dual Layer DVD burner) and used to reimage the physical appliance with. These physical appliances shipped from a factory with a hard drive that has magnetic representations of 0 and 1 on it, it's entirely possible something happened to something to the data in transit. Reimaging puts everything back to square one and completely rules out the possibility of anything being corrupted.
Once it's running again, be sure to check out and install the Update 1 patch for Prime Infrastructure 1.3.0.20 (filename PI_1.3.0.20_Update_1-12.tar.gz).
Release Notes for Update 1 for Cisco Prime Infrastructure 1.3.0.20 -
I am running Cisco Prime NCS 1.3 and I have two questions that I hope someone can help me out with.
Question 1). Is it possible to forward the Rogue Device Logs back to our SIEM server? If so how?
Question 2). How do I setup the Mail Server Configuration? The part I am stuck on the is the Primary SMTP server. For the username and password don't know what username and password I should use. Should I use the account I am logged into NCS prime ?
Thanks for any help or input.
WeissWeiss,
Re your first question. Prime itself cannot forward syslogs messages it receives. You may need to setup your wireless controller to use a secondary syslog server as your SIEM server.
Re the second, username and password is optional and only used when your mail server does not allow unauthenticated users from relaying mail.
If it allows that, you can leave those fields blank.
If it does require authentication, you should have a service account created on the smtp server for use by Prime when sending outgoing mail. -
Issue with backup NCS via NFS (Cisco Prime NCS 1.2.0)
Hello,
Does someone have issue with backup NCS via externally mounted location (NFS)?
I have Cisco Prime NCS 1.2.0 and tried backup it to external resources, but I have issue with my free space:
NCS/admin# backup ncs repository backup_nfs
% Creating backup with timestamped filename: ncs-130131-0534.tar.gpg
INFO : Cannot configure the backup directory size settings as the free space available is less than the current database size.
You do not have enough disk space available in your repository to complete this backup.
DB size is 25 GB
Available size is 12 GB
Please refer to the command reference guide for NCS and look at the /backup-staging-url/ command reference to setup the backup repository on an externally mounted location
Stage 5 of 7: Building backup file ...
-- complete.
Stage 6 of 7: Encrypting backup file ...
-- complete.
Stage 7 of 7: Transferring backup file ...
-- complete.
I have tried to add additional space and use command backup-staging-url (my configuration: backup-staging-url nfs://server2008:/nfs), but it didn't help me.
NFS share works perfect. I have checked it via NFS repository:
repository backup_nfs
url nfs://server2008:/nfs
+++++++++++++++++++++++++++++++++++++++
NCS/admin# show repository backup_nfs
NCS-130130-1135.tar.gpg
NCS-130130-1137.tar.gpg
NCS-130130-1157.tar.gpg
NCS-130130-1158.tar.gpg
test-130130-1210.tar.gz
Everytime when I try create backup I receive error message "You do not have enough disk space available in your repository to complete this backup".
Does someone know how can I backup NCS system?
Thank youHow much space is availabe on that NFS mount point? It looks like to me from the error message that there is only 12 GB....
The backup-staging-url is just for a space used to stage the backup before it is written----- -
Cisco Prime NCS 1.3 Licensing issue
Hello,
I am installing Cisco prime NCS x 2 servers. I downloaded the licenses which are ordered allong with the devices as follows.
Product Name : L-PI12-LF-50-LIC
Product Description : L-PI12-LF-50-LIC:Prime Infrastructure 1.2 - Lifecycle - 50 Device Lic PAK
Product Qty : 1
UDI : PID: PRIME-NCS-APL-K9
The issue is, the NCS appliance was not started properly and then I used the CD which came along with the server (NCS 1.3). Now my system is up and running but it is NCS 1.3 and when i upload the licenses, it shows that the UID is not matching with the system. Is this because the licenses are issued for NCS 1.2 and my system runs on 1.3? If so, what do you suggest, do i need to download NCS 1.2, install it, add the license and then upgrade to 1.3?
Thanks for your advise,
Regards
JayPrime Infrastructure has a support forum at:
https://supportforums.cisco.com/community/netpro/network-infrastructure/network-management
Please post this to that forum to reach PI experts.
Regards -
Hi,
A Cisco Prime NCS physical appliance has been shipped with version NCS 1.1
Then it has been upgraded to:
1) ncs_patch-1.1.0.58-upgrade-12.tar.gz
2) PI-upgrade-bundle-1.3.0.20.tar.gz
Our customer have got only 1.2 licenses. How can we downgrade the appliance to 1.2 ?
Or how can we re-install 1.1 or 1.2, for both versions we did not find the iso's to download.
Thanks in advanceHello,
What is the Current verison of NCS ,you are using ?
AFAIk, you can Installed PI 1.3 directly as PI 1.2 is not available for download.
Conatct the License Team and they will re-host the license for you.
you can downlaod the iso file from the below link:
http://software.cisco.com/download/release.html?mdfid=284652876&flowid=38562&softwareid=284272932&release=1.3&relind=AVAILABLE&rellifecycle=&reltype=latest
Note:Upgrade from Cisco Prime Network Control System 1.1.2.12 or 1.1.3.2 to Cisco Prime Infrastructure 1.3.0.20 is not supported.
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors **** -
Cisco Prime NCS appliance & license
Hi all,
I'm looking for getting a Cisco prime NCS appliance (PRIME-NCS-APL-K9). I'm a little bit confused regarding to the license scheme:
1. Does the appliance has any license coming with it or we need to order the license separately?
2. If I have an WLC 5508 (license support 12 APs) & 12 3500 APs, then number of devices counted will be 1 (WLC) or 12 (APs) or 13 (WLC + APs) ?
Thanks for the help,Cisco Prime Infrastructure for the first time you may access the lifecycle and assurance features using the built-in evaluation license that is available by default. The default evaluation license is valid for 60 days for 100 devices and 150 interfaces. You will need to purchase the base license and the corresponding feature license before the evaluation license expires. Cisco Prime Infrastructure 1.2 can be ordered using the standard Cisco® ordering tools at http://www.cisco.com/go/ordering. More information about getting the license files can be found in the Cisco Prime Infrastructure 1.2 Ordering and Licensing Guide
-
Cisco Prime NCS v1.1 Eval Download
Hello,
I've been trying to download the evaluation of Cisco Prime NCS v1.1 from the eval page located at the below address so I could, well, evaluate it.
https://cisco.mediuscorp.com/market/networkers/productView.se.work?/nxt/rcrs/proieidentity/=19841
But I've been getting corrupt downloads and can't extract the .OVA file. I've tried this on a few computers and 2 different OSs, but to no success.
Am I doing something wrong?
Thank you in advance and sorry if this is the wrong forum to ask this question.@wireless.wlc
I installed it on a Cisco UCS server running vSphere 4.1 (ESXi). The template wants to make it thick provision, but for testing purposes I just made it thin provision. After only adding maybe... 20 switches, 18 APs and 1 WLC it takes up just shy of 40 GB.
If you try to install on a 50GB hard drive or a datastore that's less than 200GB available, it will probably just give you a warning. But I'm not 100% sure since this is being deployed from from an OVA template.
I'll install it again on a datastore with only 100GB to test and see if it works that way. -
Dear Cisco Team,
I would like to know what are the main facts to choose Cisco Prime NCS.
And how many kind of monitoring system are there in Cisco.
Best Regards,
Thet HtarHi Thet,
Cisco Prime Infrastructure simplifies the management of wireless and wired networks. It offers Day 0 and 1 provisioning, as well as Day N assurance from the branch to the data center. We call it One Management. With this single view and point of control, you can reap the benefits of One Management across both network and compute.
Prime Infrastructure enables you to configure and monitor one or more controllers, switches and associated access points. Prime Infrastructure includes the same configuration, performance monitoring, security, fault management, and accounting options used at the controller level and adds a graphical view of multiple controllers and managed access points.
Read the below link for more detail::
http://www.cisco.com/c/en/us/td/docs/wireless/prime_infrastructure/1-2/configuration/guide/pi_12_cg/ovr.html
You can download it from here and use it under evaluation period for testing::
https://software.cisco.com/download/release.html?mdfid=286236028&flowid=72882&softwareid=284272932&release=2.2&relind=AVAILABLE&rellifecycle=&reltype=latest
Thanks-
Afroz
***Ratings Encourages Contributors **** -
Difference between Cisco Prime Infrastructure and Cisco Prime NCS
Dear All,
I am currenctly confused in choosing what type of Cisco Prime.
1.Which one should I choose? should I order Cisco Prime NCS or directly purchase Cisco Prime Infrastructure (since Cisco Prime Infrastructure has the feature of NCS)?
2, Why does Cisco not just remove the Cisco Prime NCS ordering Part Number since Cisco Prime Infrastructure already cover the NCS?
Please advice meHortono,
I started to write a long and lengthy msg about my experience with this, but instead, let me direct you to the horses mouth. There have been weekly webinars in regards to Cisco Prime (many differnt products under this headline) including Infrastructure. I believe the Cisco PI is actually scheduled for Thursdays, so hopefully you'll look at this in time to catch it and ask your questions from the gurus.
https://ciscosales.webex.com/ciscosales/j.php?J=200462944&PW=NMzhhNjM5OGU3
Looks like this may be the last week, catch it if you can. -
Difference between cisco prime NCS and cisco WCS
hello
i have a question. I am just started with testing cisco prime ncs
i have worked with cisco WCS
now i was wondering wat the difference is between these two
can someone please explain it.
thanks allotThey are both very similiar in functionality. The major difference is that NCS offers a basic switch management front end and allows you to see your wired clients just as you would your wireless. Other then that, the I've found the latest version of NCS to run quite a bit smoother and faster then my WCS install of several years, slicker graphics. I would recommend using NCS in Chrome for the best view.
-
Hello everyone
im new here. but i have a question. its about the Cisco Prime ncs.
i have installed the Cisco Prime with a ova file on a VM-ware server.
i have configured the cisco prime with the setup at the beginning. but the problem is that i can't get the
webpage to work. when i go to the https://ip-address. when i try to login with my admin user at the webpage
it say's that it is a invalid username and password.
wat must i do to be able to login to the webpage. is there like a different user for this..?
thank.Hi
We're experiencing the same problem. But are you sure of the way that you resolved the issue?
We have both NCS and NCS (WAN) 1.1.
NCS-VA-1.1.0.58.ova is the installer for NCS
NCS-WAN-VA-1.1.0.1114-small.ova is the installer for NCS WAN 1.1
We cannot logon to the NCS WAN using the root login/password. I have already tried configuring again the root password but error occurs.Until now we cannot logon to NCS WAN.
Any recommendations on this? -
Hardware requirement for running exchange 2010 on vmware workstation
Dear Team,I need to create a exchange 2010 sp2 on a guest os on vmware workstation.kindly help me out with the physical hardware requirements for a home user
Hey Mukund26,
Before I answer your questions, my suggestion would be for you to figure out exactly what you want to get out of running that Exchange lab. Are you trying to learn Exchange features like DAGs? Are you trying to learn about virtualizing Exchange? When you figure that out you'll be better able to answer question 1 since you may not need all of those virtual machines.
Here are my thoughts on your questions.
1) It is probably technically possible to run 10 virtual machines on the configuration you have but you're going to have pretty bad performance. I would try to trim that down to only the virutal machines that you really need in order to use the lab how you want to use it. Here are some questions that may help you figure out what you need:
Why do you need two domain controllers? I don't think you need to worry as much about redundancy in your lab.
Why do you need 2 ESXi hosts and a vCenter? What purpose do they serve in this configuration? Are you trying to run the Exchange VMs nested under the ESXi VMs? If so, why?
Is there a reason why you want to separate out HTS/CAS from MBX in your lab? Combining all roles together can reduce the number of VMs you need. If you separate out the roles you'll need to allocate a lot of RAM to support all of those Exchange VMs.
2) Running a lot of virtual machines on a single 1TB SATA disk, especially a 5400 RPM disk, is going to be slow. It'll be especially painful when the VMs are booting up, rebooting, shutting down, etc.. Try to stagger the power on operations so they don't all boot at once. For example, first boot your DCs, then boot your HTS/CAS, then your MBX, etc. There is no doubt that configuration will be slow, so if you can get your hands on an solid state drive with enough space you'll have significantly better performance. For the purposes of a lab, though, it is probably ok if you can be patient.
3) I think the i5 processor will be just fine for this lab. Usually in a lab setting CPU performance isn't the most important thing so similar to above as long as you can be a little patient I think that CPU will suit you just fine.
As I said figure out what you want to get out of the lab and then you can determine how many VMs you need and whether or not you want to upgrade hardware. If you're looking to learn about Exchange 2010 in general I would suggest using multirole servers, getting rid of one of the DCs, and not worrying about virtualizing ESX/vCenter so that you can learn. If you're looking to learn about virtualizing Exchange 2010 on vSphere then let's figure out exactly what you want to get out of it and figure out what you can learn using VMware Workstation and what you really need vSphere for.
Best of luck!
Matt
http://www.thelowercasew.com -
Hardware requirement for sap system.
Hello All,
i want to install SAP on my local home PC.
Kindly let me know the hardware requirment for this.
So that i canIf You want to install IDES 4.7EE
Hard disk minimum 80 GB 120 GB or 160GB best
Ram: Minimum 512 Mb 1 GB Best u can run in 256MB also
Processor : Minimum PIII , PIV is best
DVD Drive
Remaining Normal
If You want to install IDES ECC5.0 only R/3
Hard disk minimum 160GB best 250 GB
Ram: Minimum 1 GB U can run in 512MB alos
Processor : Minimum PIV
DVD Drive
Remaining Normal
Maybe you are looking for
-
If I upgraded someone else's line and received the phone, could that phone be activated on another line? Without ever being activated on the "intended" line instead of transferring upgrades, and would the old phone on that line still be able to be us
-
Video Chatting with a Windows Vista User
Hello. I am trying to connect with my friend through video chat on aim. I have a macbook and my friend has a PC laptop with Vista. When I log onto iChat and see that they are on I am able to click on the video icon and invite them to a video chat and
-
I mean is there anyway to user decode for showing sum(amount) for different period of dates Is there any idea to make faster ageing report for accounts payable module using report 6i Thanks AHon Edited by: [email protected] on Nov 22, 2009 7:07 AM
-
Ava.lang.IllegalArgumentException: No bean specified
config <form-beans> <form-bean name="FileUpload" type="roseindia.net.StrutsUploadForm"/> </form-beans> <action-mappings> <action path="/FileUpload" type="roseindia.net.StrutsUploadAction" name="FileUpload" scope="session" validate="true" input="
-
How to enable delete tab to work in bridge cc?
The delete tab on the keyboard does not work in Bridge CC. When I hit ctr.-delete, it still does not function.