Hardware requirements for 11i
Hello,
our hardware profile:
Intel STL2 Dual CPU server board fsb-133
Intel 2xP3-933 CPU 133MHz
2x256MB ecc reg Ram PC133
Onboard SCSI U160 Controler dual channel
can apps 11i run on this server?
max concurrent users will be about 20.
Thanks for comments
null
Apps would run fine but I would up the memory to at least 1gig considering how inexpensive memory is these days. I'm not sure which modules you're planning to run but the visions demo requires at least 20 gigs of free drive space, this is excluding the space required by the OS.
Similar Messages
-
Hi,
I need a little help. We want to upgrade from 10.7 (Char) to 11i. We have 150 peak user (total around 200). How many servers do we need? Is it sufficient to have 1 NT for database, 1 NT for application and web listener and 1 Unix for concurrent processing? Do we need additional servers for Reports, forms, Discoverer?Those additonal servers you are talking about (reports, discoverer) are utilized mainly by the new CRM modules. If you are upgrading from 10.7 character, you don't sound like you will be using the CRM modules, unless you
are expanding your business horizons...
So, if you are not, you don't need the extra hardware...
You already have enough with the 3 servers
you listed.
I've seen customers of your size go with one server... but it was a big honkin server. -
Hardware requirements for Fusion Applications Setup
Hi,
I want to provision Oracle Fusion Applications CRM domain as a reference implementation to understand the CRM functionality and for other R&D purposes.
For such an implementation with no high traffic, no load balancing/high availability and just setting up just an FA CRM product offering-- Please help me in understanding the minimum hardware requirements for provisioning this set up.
(Raising this thread in this forum in reference to few other FA threads being addressed in this forum.
Please suggest me the most appropriate forum if this is not the right place)
Thanks,
Srikanth.Hi!
I hope all the things are ok with you, well i have a trouble, i'm installing Oracle Applications 11i (Oracle DB 10g) on RHEL4, i have all the requirements to install and i followed the steps to install on
the manual r115102ins-1, i begin the installation with the displays screen but one of this check progress bars (Monitor Installation Progress), during the installation, Rapid Install displays a main progress bar and an individual progress bar.
When i enter the correct path for Oracle Applications Rapid Install -RDBMS Disk3, the porcentage stops in 86% and not go on, why? Is there a solution?
Is there anyone for help me!!
Best Regards!! -
Hardware requirements for Oracle Applications
I remember that I’ve seen an excel worksheet (guess it was produced by Oracle) where we could input the expected number of users and a lot of other variables and obtain the desired hardware requirements for a specific installation of Oracle Applications.
Does anyone know of the existence of such thing?
Many thanks in advance
Octavio TeixeiraHi!
I hope all the things are ok with you, well i have a trouble, i'm installing Oracle Applications 11i (Oracle DB 10g) on RHEL4, i have all the requirements to install and i followed the steps to install on
the manual r115102ins-1, i begin the installation with the displays screen but one of this check progress bars (Monitor Installation Progress), during the installation, Rapid Install displays a main progress bar and an individual progress bar.
When i enter the correct path for Oracle Applications Rapid Install -RDBMS Disk3, the porcentage stops in 86% and not go on, why? Is there a solution?
Is there anyone for help me!!
Best Regards!! -
Hardware requirement for running exchange 2010 on vmware workstation
Dear Team,I need to create a exchange 2010 sp2 on a guest os on vmware workstation.kindly help me out with the physical hardware requirements for a home user
Hey Mukund26,
Before I answer your questions, my suggestion would be for you to figure out exactly what you want to get out of running that Exchange lab. Are you trying to learn Exchange features like DAGs? Are you trying to learn about virtualizing Exchange? When you figure that out you'll be better able to answer question 1 since you may not need all of those virtual machines.
Here are my thoughts on your questions.
1) It is probably technically possible to run 10 virtual machines on the configuration you have but you're going to have pretty bad performance. I would try to trim that down to only the virutal machines that you really need in order to use the lab how you want to use it. Here are some questions that may help you figure out what you need:
Why do you need two domain controllers? I don't think you need to worry as much about redundancy in your lab.
Why do you need 2 ESXi hosts and a vCenter? What purpose do they serve in this configuration? Are you trying to run the Exchange VMs nested under the ESXi VMs? If so, why?
Is there a reason why you want to separate out HTS/CAS from MBX in your lab? Combining all roles together can reduce the number of VMs you need. If you separate out the roles you'll need to allocate a lot of RAM to support all of those Exchange VMs.
2) Running a lot of virtual machines on a single 1TB SATA disk, especially a 5400 RPM disk, is going to be slow. It'll be especially painful when the VMs are booting up, rebooting, shutting down, etc.. Try to stagger the power on operations so they don't all boot at once. For example, first boot your DCs, then boot your HTS/CAS, then your MBX, etc. There is no doubt that configuration will be slow, so if you can get your hands on an solid state drive with enough space you'll have significantly better performance. For the purposes of a lab, though, it is probably ok if you can be patient.
3) I think the i5 processor will be just fine for this lab. Usually in a lab setting CPU performance isn't the most important thing so similar to above as long as you can be a little patient I think that CPU will suit you just fine.
As I said figure out what you want to get out of the lab and then you can determine how many VMs you need and whether or not you want to upgrade hardware. If you're looking to learn about Exchange 2010 in general I would suggest using multirole servers, getting rid of one of the DCs, and not worrying about virtualizing ESX/vCenter so that you can learn. If you're looking to learn about virtualizing Exchange 2010 on vSphere then let's figure out exactly what you want to get out of it and figure out what you can learn using VMware Workstation and what you really need vSphere for.
Best of luck!
Matt
http://www.thelowercasew.com -
Hardware requirement for sap system.
Hello All,
i want to install SAP on my local home PC.
Kindly let me know the hardware requirment for this.
So that i canIf You want to install IDES 4.7EE
Hard disk minimum 80 GB 120 GB or 160GB best
Ram: Minimum 512 Mb 1 GB Best u can run in 256MB also
Processor : Minimum PIII , PIV is best
DVD Drive
Remaining Normal
If You want to install IDES ECC5.0 only R/3
Hard disk minimum 160GB best 250 GB
Ram: Minimum 1 GB U can run in 512MB alos
Processor : Minimum PIV
DVD Drive
Remaining Normal -
I am on the evaluation of different technologies, I tried to get out the details of minimum hardware requirements for
Developers' Desktop,
Developement Server,
Production Server,
with regards to the J2EE. I could not find the same on any of the documents, I may be searching wrong docs. Can any one help me on finding the Hardware specs required for the above 3 categories?
regards
Mehul TrivediHi Sudeep,
On the following links you will find the Composition Environment Product Availability Matrix and the installation guide of Composition Environment 7.1 Developer Edition.
SAP NetWeaver Composition Environment 7.1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0e9cc7b-0469-2a10-d3a8-f4f04b30fb0b
For accessing the Product Availability Matrix document the service marketplace access is required.
Best regards,
Yasar -
Hardware requirement For ECC6.0
Hi Everbody,
could u please help in providing hardware requirements for ECC6.0(IDES) for sandbox server.Like
O/s(32bit or 64bit),processor,Harddisk,RAM
with regards,
eswar.Hello,
O/s - All 64bits now a days.
CPU - PIV or Dual core also.
RAM - 3GB
H/Disk - 300 to 400 GB.
Above all are minimum recommended.
If u are able to arrage more , I/O ie performance will be good.
That's it.
Note: Points always encourage me to reply !! -
Hardware requirement for Oracle Universal Content Management
Hi Experts,
What are the Hardware requirements for Oracle Universal Content Management ?
Regards
Nasirdoes this help?
Oracle WebLogic Server 11g (10.3.3) System Requirements
Oracle WebLogic Server supports a number of platforms including:
– Linux
– Sun Solaris
– HP-UX
– Windows 2000, 2003 Server, XP
• Processor:
– At least one 1 GHz CPU is recommended.
– Intel and UNIX processors are supported.
• Hard disk drive:
– A full installation requires approximately 2 GB of disk space.
– The Linux value for file descriptors must be 4096 or greater.
– Samples are optional (download from OTN).
• Memory:
– A minimum of 2 GB RAM is recommended for WebLogic
Server.
– Consider the number of simultaneous users and sessions.
– Consider in-memory programs, such as Coherence.
System Requirements
The following are some of the basic system requirements for Oracle WebLogic Server 10.3.3:
• The Oracle WebLogic Server installer requires a Java Runtime Environment (JRE) to run.
Oracle WebLogic Server is certified with JDK6.0. As part of the installation, it gives the option
to install the JRockit JDK 6.0 version. As part of postinstallation, prefix the bin directory of
the JDK to the PATH environment variable.
• The Oracle WebLogic Server installer requires a temporary location in which to unpack the
files. Typically, the installer requires approximately 2.5 times the amount of temporary space
that is required by the installed files.
Note: In this release of WebLogic Server, users can choose which components of WebLogic Server
they use. Specifically, this release allows users to choose whether the Enterprise JavaBeans (EJB),
Java Message Service (JMS), and J2CA services are started when WebLogic Server is started. The
benefit of excluding some services is reduced memory footprint and reduced startup time. -
Hardware requirement for BPM Suite
Hi All,
What are they Hardware requirements for Oracle BPM Suite.
Regards
NasirHi Nasir,
As per other experts...
There is not much difference between hardware configurations for SOA and BPM.
As BPM 11g works on top of SOA 11g. So just we need a bpm extension.
So as a high ens congiguration u need to have minimum 4GB RAM to work with Jdeveloper with SOA and BPM extenions.
It is advisble to have seperate boxes for all SOA, BPM, DB, OSB servers for better performance.
Hope this might help u...
also follow the link for 11.1.1.5 installation process that might anwer your question..
Regards,
Pavan -
Hardware requirement for Web Dynpro for JAVA
Hi Friends,
I am a starter in Web Dynpro for JAVA and about to develop web dynpro application in JAVA.Can anyone please guide me on the hardware requirement for this application of SAP?
Presently I have ECC 5.0 installed in 1 GB RAM using 160 GB harddisk.
Regards
Ashish.Hi Ashish,
If you want to install NWDS only then as said 1g.b is sufficient.
But if it's Personal System then you have to install Portal also( WAS).
You will require minimum of 2g.b of RAM and 120g.b of hard disk.
regards
Anil -
Hardware requirement for Web Dynpro for ABAP
Hi Friends,
I am a starter in Web Dynpro for ABAP and about to develop web dynpro application in ABAP.Can anyone please guide me on the hardware requirement for this application of SAP?
Presently I have ECC 5.0 installed in 1 GB RAM using 160 GB harddisk.
Regards
Ashish.hi ashish..
[link|http://help.sap.com/saphelp_nw04s/helpdata/en/43/e86de5008b4d9ae10000000a155369/content.htm]
---regards,
alex b justin -
Hardware requirement for R12 up-grade
Dear All,
We are going to upgrade from EBS 11.5.9 to R12 on Linux environment. Currently we are working on hardware requirement for R12.
1-How can we calculate sizing requirement in context of R12.
2-CPU capacity including RAM required
Or any other best procedure, we can follow to recommend new hardware.
Best regards,
KashifAnd do a thourogh testing including istore and other self service web applications before going for production. May be think of renting out of hardware or hosting option. This will give you complete idea regarding performance of R12
regards
Pravin -
Hardware requirement for Fusion Applications HCM installation
Hi Team,
I want to install fusion applications for HCM.
Can any one suggest the minimum hardware requirement for installation.
Please help me with any documents.
Thanks,
ChandraDear Chandra,
Please note that Fusion Applications installation involves following components.
1. Oracle Identity and Access Management components (Middleware infrastructure)
2. Oracle Database for IDM
3. Oracle Database for Fusion Apps
4. Fusion Applications Domains (includes Admin and managed servers for Fusion Applications)
I have posted a guide on installing Fusion applications on 2 node setup and if you have sufficient hardware to host 2 VMs then it can be done on single server as well.
http://www.oratraining.com/blog/2013/03/oracle-fusion-applications-installation-step-by-step-guide-11-1-6/
This will explain the 2 node architecture which I have prepared.
http://www.oratraining.com/blog/2013/03/fusion-applications-architecture-for-2-node-setup/
The minimum memory requirement changes if you select more products since in Fusion apps each products have their own domain and if you select more products then there will be more application managed servers (even if you don't select a product family, it will still create some managed weblogic servers based on dependency with selected products)
The minimum memory requirement to host IDM and consolidated DB in 1 node is 10-12 GB
The minimum memory requirement to host Fusion Applications domains on 2nd node is 64 GB (for 1 product family, for all products selected then 128 GB)
Please note that these are "minimum" requirements based on my experience, not as per the documents since what we are talking about is installing for "learning", not for production, where you will host various components in separate nodes.
Thanks
Tushar
www.oratraining.com -
Hardware requirement for EBS R12 (12.1.3)
Hi,
Can any one please let me know what is the hardware requirement for EBS R12 (12.1.3) for 100 users and which going into be TEST instance.
Thanks in advance.
Thanks,
VenkatCan any one please let me know what is the hardware requirement for EBS R12 (12.1.3) for 100 users and which going into be TEST instance.
Thanks in advance.This topic was discussed many times in the forum before, please see old threads for details.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+AND+Requirements&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+AND+Benchmark&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein
Maybe you are looking for
-
Profile in Fact sheet under over views
Hello gurus how to indenfy the table fromwhere the profiles are created in the fact sheet (account view)under Over views work center Work center: Over view -> Account view>Data Environment--->profile (say:Internal Profile for Budget Billing Amount Ad
-
When i try to drag music from itunes to my ipod i get blocked. How do I fix this?
When i try to drag music from itunes to my ipod i get blocked. How do I fix this?
-
Using fifos or indicators / varibles on cRio.
I'm currently working on the classical "remote, non-distributed measurement of voltages using the 9205 module" application. I was just wondering if I need at all to use fifos to transfer data from the fpga to the host computer on the cRio-9004. I did
-
I installed Mavericks to my computer and iPhoto isn't working it has a grey no working symbol over it. So I tried to download the new version of iPhoto but it starts to download and just gets to 10.2MB and starts all over after about 3 mins of doing
-
Please help: validate() function is taking 2 sec.
Hi, My application creates a new panel with different components frequently. The problem is one JComboBox which most of the panels have in common holds 1lakh string objects. Creating the panel with all the required components is taking 100ms. I remov