Hardware requirements for JavaFx 2.1.1

Hello there,
I've built a JavaFx application (Rubiks Cube type game), it runs fine on:
My desktop (Win7 64bit, has GTX560TI graphics card)
My laptop (Win7 bit, has ATI5470 card)
But not on netbook (Win7 Starter, Intel Atom N450), the 3D effect doesn't show, and the images just appear in the corner of screen.
Is this because it has no graphics card, and uses cpu for graphics?
Or is it something software related that netbook can't handle?
Thanks for any advice, I'm just trying to make it clear for the various users using the product.

Is this because it has no graphics card?likely
Or is it something software related that netbook can't handle?unlikely
I'm just trying to make it clear for the various users using the product.Check the Scene3D conditional feature and provide a graceful fallback scenario for users for which this flag returns false.
For example, show an error info message or a 2D tic tac toe game instead.
http://docs.oracle.com/javafx/2/api/javafx/application/ConditionalFeature.html#SCENE3D
See the Graphics section of the JavaFX 2.1 System Requirements document for more info:
http://docs.oracle.com/javafx/2/system_requirements_2-1/jfxpub-system_requirements_2-1.htm

Similar Messages

  • Hardware requirement for running exchange 2010 on vmware workstation

    Dear Team,I need to create a exchange 2010 sp2 on a guest os on vmware workstation.kindly help me out with the physical hardware requirements for a home user

    Hey Mukund26,
    Before I answer your questions, my suggestion would be for you to figure out exactly what you want to get out of running that Exchange lab.  Are you trying to learn Exchange features like DAGs?  Are you trying to learn about virtualizing Exchange?  When you figure that out you'll be better able to answer question 1 since you may not need all of those virtual machines.
    Here are my thoughts on your questions.
    1) It is probably technically possible to run 10 virtual machines on the configuration you have but you're going to have pretty bad performance. I would try to trim that down to only the virutal machines that you really need in order to use the lab how you want to use it.  Here are some questions that may help you figure out what you need:
    Why do you need two domain controllers?  I don't think you need to worry as much about redundancy in your lab. 
    Why do you need 2 ESXi hosts and a vCenter?  What purpose do they serve in this configuration?  Are you trying to run the Exchange VMs nested under the ESXi VMs?  If so, why?
    Is there a reason why you want to separate out HTS/CAS from MBX in your lab?   Combining all roles together can reduce the number of VMs you need.  If you separate out the roles you'll need to allocate a lot of RAM to support all of those Exchange VMs.
    2)  Running a lot of virtual machines on a single 1TB SATA disk, especially a 5400 RPM disk, is going to be slow.  It'll be especially painful when the VMs are booting up, rebooting, shutting down, etc..  Try to stagger the power on operations so they don't all boot at once.  For example, first boot your DCs, then boot your HTS/CAS, then your MBX, etc.   There is no doubt that configuration will be slow, so if you can get your hands on an solid state drive with enough space you'll have significantly better performance.  For the purposes of a lab, though, it is probably ok if you can be patient.
    3) I think the i5 processor will be just fine for this lab.  Usually in a lab setting CPU performance isn't the most important thing so similar to above as long as you can be a little patient I think that CPU will suit you just fine.
    As I said figure out what you want to get out of the lab and then you can determine how many VMs you need and whether or not you want to upgrade hardware.  If you're looking to learn about Exchange 2010 in general I would suggest using multirole servers, getting rid of one of the DCs, and not worrying about virtualizing ESX/vCenter so that you can learn.  If you're looking to learn about virtualizing Exchange 2010 on vSphere then let's figure out exactly what you want to get out of it and figure out what you can learn using VMware Workstation and what you really need vSphere for.
    Best of luck!
    Matt
    http://www.thelowercasew.com

  • Hardware requirement for sap system.

    Hello All,
    i want to install SAP on my local home PC.
    Kindly let me know the hardware requirment for this.
    So that i can

    If You want to install IDES 4.7EE
    Hard disk minimum 80 GB 120 GB or 160GB best
    Ram: Minimum 512 Mb 1 GB Best u can run in 256MB also
    Processor : Minimum PIII , PIV is best
    DVD Drive
    Remaining Normal
    If You want to install IDES ECC5.0  only R/3
    Hard disk minimum 160GB best 250 GB
    Ram: Minimum 1 GB  U can run in 512MB  alos
    Processor : Minimum  PIV
    DVD Drive
    Remaining Normal

  • Hardware requirement for J2EE

    I am on the evaluation of different technologies, I tried to get out the details of minimum hardware requirements for
    Developers' Desktop,
    Developement Server,
    Production Server,
    with regards to the J2EE. I could not find the same on any of the documents, I may be searching wrong docs. Can any one help me on finding the Hardware specs required for the above 3 categories?
    regards
    Mehul Trivedi

    Hi Sudeep,
    On the following links you will find the Composition Environment Product Availability Matrix and the installation guide of Composition Environment 7.1 Developer Edition.
    SAP NetWeaver Composition Environment 7.1
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0e9cc7b-0469-2a10-d3a8-f4f04b30fb0b
    For accessing the Product Availability Matrix document the service marketplace access is required.
    Best regards,
    Yasar

  • Hardware requirement For ECC6.0

    Hi Everbody,
    could u please help in providing hardware requirements for ECC6.0(IDES) for sandbox server.Like
    O/s(32bit or 64bit),processor,Harddisk,RAM
    with regards,
    eswar.

    Hello,
    O/s      - All 64bits now a days.
    CPU    -  PIV or Dual core also.
    RAM    -  3GB
    H/Disk  -  300 to 400 GB.
    Above all are minimum recommended.
    If u are able to arrage more , I/O ie performance will be good.
    That's it.
    Note: Points always encourage me to reply !!

  • Hardware requirement for Oracle Universal Content Management

    Hi Experts,
    What are the Hardware requirements for Oracle Universal Content Management ?
    Regards
    Nasir

    does this help?
    Oracle WebLogic Server 11g (10.3.3) System Requirements
    Oracle WebLogic Server supports a number of platforms including:
    – Linux
    – Sun Solaris
    – HP-UX
    – Windows 2000, 2003 Server, XP
    • Processor:
    – At least one 1 GHz CPU is recommended.
    – Intel and UNIX processors are supported.
    • Hard disk drive:
    – A full installation requires approximately 2 GB of disk space.
    – The Linux value for file descriptors must be 4096 or greater.
    – Samples are optional (download from OTN).
    • Memory:
    – A minimum of 2 GB RAM is recommended for WebLogic
    Server.
    – Consider the number of simultaneous users and sessions.
    – Consider in-memory programs, such as Coherence.
    System Requirements
    The following are some of the basic system requirements for Oracle WebLogic Server 10.3.3:
    • The Oracle WebLogic Server installer requires a Java Runtime Environment (JRE) to run.
    Oracle WebLogic Server is certified with JDK6.0. As part of the installation, it gives the option
    to install the JRockit JDK 6.0 version. As part of postinstallation, prefix the bin directory of
    the JDK to the PATH environment variable.
    • The Oracle WebLogic Server installer requires a temporary location in which to unpack the
    files. Typically, the installer requires approximately 2.5 times the amount of temporary space
    that is required by the installed files.
    Note: In this release of WebLogic Server, users can choose which components of WebLogic Server
    they use. Specifically, this release allows users to choose whether the Enterprise JavaBeans (EJB),
    Java Message Service (JMS), and J2CA services are started when WebLogic Server is started. The
    benefit of excluding some services is reduced memory footprint and reduced startup time.

  • Hardware requirement for BPM Suite

    Hi All,
    What are they Hardware requirements for Oracle BPM Suite.
    Regards
    Nasir

    Hi Nasir,
    As per other experts...
    There is not much difference between hardware configurations for SOA and BPM.
    As BPM 11g works on top of SOA 11g. So just we need a bpm extension.
    So as a high ens congiguration u need to have minimum 4GB RAM to work with Jdeveloper with SOA and BPM extenions.
    It is advisble to have seperate boxes for all SOA, BPM, DB, OSB servers for better performance.
    Hope this might help u...
    also follow the link for 11.1.1.5 installation process that might anwer your question..
    Regards,
    Pavan

  • Hardware requirement for Web Dynpro for JAVA

    Hi Friends,
                    I am a  starter in Web Dynpro for JAVA and about to develop web dynpro application in JAVA.Can anyone please guide me on the hardware requirement for this application of SAP?
           Presently I have ECC 5.0 installed in 1 GB RAM using 160 GB harddisk.
    Regards
    Ashish.

    Hi Ashish,
    If you want to install NWDS only then as said 1g.b is sufficient.
    But if it's Personal System then you have to install Portal also( WAS).
    You will require minimum of 2g.b of RAM and 120g.b of hard disk.
    regards
    Anil

  • Hardware requirement for Web Dynpro for ABAP

    Hi Friends,
                    I am a  starter in Web Dynpro for ABAP and about to develop web dynpro application in ABAP.Can anyone please guide me on the hardware requirement for this application of SAP?
           Presently I have ECC 5.0 installed in 1 GB RAM using 160 GB harddisk.
    Regards
    Ashish.

    hi ashish..
    [link|http://help.sap.com/saphelp_nw04s/helpdata/en/43/e86de5008b4d9ae10000000a155369/content.htm]
    ---regards,
       alex b justin

  • Hardware requirement for R12 up-grade

    Dear All,
    We are going to upgrade from EBS 11.5.9 to R12 on Linux environment. Currently we are working on hardware requirement for R12.
    1-How can we calculate sizing requirement in context of R12.
    2-CPU capacity including RAM required
    Or any other best procedure, we can follow to recommend new hardware.
    Best regards,
    Kashif

    And do a thourogh testing including istore and other self service web applications before going for production. May be think of renting out of hardware or hosting option. This will give you complete idea regarding performance of R12
    regards
    Pravin

  • Hardware requirement for Fusion Applications HCM installation

    Hi Team,
    I want to install fusion applications for HCM.
    Can any one suggest the minimum hardware requirement for installation.
    Please help me with any documents.
    Thanks,
    Chandra

    Dear Chandra,
    Please note that Fusion Applications installation involves following components.
    1. Oracle Identity and Access Management components (Middleware infrastructure)
    2. Oracle Database for IDM
    3. Oracle Database for Fusion Apps
    4. Fusion Applications Domains (includes Admin and managed servers for Fusion Applications)
    I have posted a guide on installing Fusion applications on 2 node setup and if you have sufficient hardware to host 2 VMs then it can be done on single server as well.
    http://www.oratraining.com/blog/2013/03/oracle-fusion-applications-installation-step-by-step-guide-11-1-6/
    This will explain the 2 node architecture which I have prepared.
    http://www.oratraining.com/blog/2013/03/fusion-applications-architecture-for-2-node-setup/
    The minimum memory requirement changes if you select more products since in Fusion apps each products have their own domain and if you select more products then there will be more application managed servers (even if you don't select a product family, it will still create some managed weblogic servers based on dependency with selected products)
    The minimum memory requirement to host IDM and consolidated DB in 1 node is 10-12 GB
    The minimum memory requirement to host Fusion Applications domains on 2nd node is 64 GB (for 1 product family, for all products selected then 128 GB)
    Please note that these are "minimum" requirements based on my experience, not as per the documents since what we are talking about is installing for "learning", not for production, where you will host various components in separate nodes.
    Thanks
    Tushar
    www.oratraining.com

  • Hardware requirement for EBS R12 (12.1.3)

    Hi,
    Can any one please let me know what is the hardware requirement for EBS R12 (12.1.3) for 100 users and which going into be TEST instance.
    Thanks in advance.
    Thanks,
    Venkat

    Can any one please let me know what is the hardware requirement for EBS R12 (12.1.3) for 100 users and which going into be TEST instance.
    Thanks in advance.This topic was discussed many times in the forum before, please see old threads for details.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+AND+Requirements&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+AND+Benchmark&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Hardware+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Hardware requirement for install PI 7.3

    Hi, Expert,
    Does anyone can tell me what is the hardware requirement for install PI 7.3 ( full version)? Disc space and RAM, etc. Does installation also need Oracle database to be installed as well? If not, where does PI store payload data?
    Thanks,
    Charles

    Hello
    The installation/planning/size guides etc are available from:
    http://service.sap.com/instguides
    -> SAP NetWeaver
    -> SAP NetWeaver 7.3
    Further information on 7.3: SAP NetWeaver 7.3
    Regards
    Mark

  • Hardware Requirement for the SAP E-Sourcing 5.0

    Hi,
    Can any one tell me please about hardware requirement for SAP E-Sourcing 5.0.
    Thanks
    Sanjay Rai

    Hi Sanjay,
    May be this forum is not relevent.Hardware requirement mainly may depends on number of user licences which your company looking.also based on number applications which u r going to install....
    Rgds,
    Gadde.

  • Hardware requirement for SAP E-Sourcing 5.0

    Hi,
    Can any one tell me please about hardware requirement for SAP E-Sourcing 5.0.
    Thanks
    Sanjay Rai

    Hi
    Frictionless SRM 2005 SP3 has been rename SAP E-Sourcing SAP E-Sourcing 4.2.00.
    For detailed SRM Installation, Upgrade, Heardware requirments, Please go through the details of the Release-Independent Related OSS Notes given below ->
    Note 1093204 - Object Migration (This Note contains a detailed ZIP file)
    Note 1122739 - SRM E-Sourcing 5.0 Patch B (5.0.00_B) Release Notes
    Note 1094095 - SRM 2005 SP1 Patch O (4.1.00_O) Release Notes
    Note 1094094 - SRM E-Sourcing 4.2 Patch L (4.2.00_L) Release Notes
    Note 1094092 - SRM E-Sourcing 4.2 SP4 (4.4.00) Release Notes
    Do let me know.
    Regards
    - Atul

Maybe you are looking for

  • File Error: The Specified file is open and in use by this or another app...

    I have imported a string of pictures and dragged them into the FCP timeline. I render them and it renders a certain percentage then it stops and says "File Error: The Specified file is open and in use by this or another application." After reading th

  • In FBL5N, i can't modify the "payment block" by the mass change

    Hi All, In FBL5N, launched for more vendors, choosing the button "mass change", SAP doesn't allow me to modify the "payment block". Its field is grey. I wonder if is possible making this field modifiable..... Thank You or Your help Gandalf

  • WARNING: Flash Archive IDs do not match (possible corrupt archive)

    I'm running into problems when trying to use a newly patched Solaris 10 system's flash image via my Solaris 9 Jumpstart server. I'm able to use other flash's (Solaris 9 and 10) fine, but when I use this flash I get: Extracted 823.00 MB ( 99% of 824.9

  • Insufficient sockets BBC R3 on iTunes

    I don't know whether it is that the BBC does not allocate enough sockets to iTunes for Radio 3 but I can now get a connection on less than 50% of my attempts to get the BBC R3 "High" service, advertised as 320K but outside the UK, in reality only a d

  • Problem executing a JDBC Insert on PI 7.1

    Hi, I'm trying to do a simple insert to a database in 7.1. but it keeps failing. The database table has been defined to allow nulls in every field. The mapping has been tested and maps correctly resulting in the following XML: <?xml version="1.0" enc