Hardware requirements for Premiere Elements 12

Hello
I am planning to buy a new computer. Will the Premiere Elements 12 work well on Pentium G2030 or does it need the I3 or the I5? Does it need any special screen card?
Yael

Hi yaelbrahms
Please find the tech specs below : http://www.adobe.com/in/products/premiere-elements/tech-specs.html

Similar Messages

  • CPU requirement for Premiere Elements 10?

    Hi there,
    Unfortunately, I think I know the answer to this already, but thought I'd toss this out there to see if anyone has gotten it to work.
    On a Windows XP sp3 PC with a 1.86ghz Core2 6300 CPU with 2gb RAM, I'm unable to install Adobe Premiere Elements 10. When I run setup.exe I get "This installation package is not supported by this processor type. Contact your product vendor."
    The system requirements for Premiere Elements 10 do list a 2ghz CPU with SSe2 support. The Core2 6300 does support SSe2, but runs at 1.86ghz not 2ghz.
    Just haven't seen a program actually refuse to install based on CPU speed before. Guess I've been lucky. But can anyone confirm that the installer actually won't install on a slower processor speed. Not sure what else the error could be than this.
    Thanks in advance,
    Sir_timbit

    I know about the min specs. The reason I'm asking if it really checks the CPU speed is I have a school that *is* running Premiere Elements 10 on the exact same hardware. Same CPU. The only difference is the new version I'm trying to install is the volume license version, part of the Adobe Digital School collection. The school that already has it running is using Premiere Elements 10 with either separate licenses or some other license setup. So it doesn't make sense why it worked but doesn't now.
    Testing today. On my test PC, a Core 2 6300 XPsp3, the setup would start up OK using the non-VL installer, but fail when I tried to use the setup.exe from the new installer. As far as I know the program is the same, but I don't think I can do the XML customizations needed to do a silent installer on the non volume licensed version of Premiere Elements 10. In short, why does one version of PE 10 install but not the other?
    Sir_Timbit

  • Hardware requirements for Premiere Pro CS5 .versus Premiere Elements 9 ?

    Hi
    I have just started to work in Premiere Elements 9. What should it take to go up one "level" and start using Pro version (CS5) from a hardware performance point of view ?
    Below are my overview specification for the machine I'm using. Will it take more power into consideration ?
    Processor :  Intel Core i7 930, 2,8 Ghz - 4 kernels, 8 logical processors
    RAM memory : 6 GB
    64 bit operating system Windows 7
    HD Drive1 : Intel SSD Sa2M080 G2Gc ATA Device - 80GB
    HD Drive2 : Samsung HD103SJ ATA Device - 1 TB
    Video Card : NVIDIA GeForce Gt240 (1 GB RAM for video card)
    BR
    H

    CS5 is at http://forums.adobe.com/community/premiere/premierepro_current
    What KIND of files are you going to edit?
    Your system should do OK for DV and HDV but "might" struggle a bit with something like AVCHD due to only 6 gig of ram (I know, saying "only" 6 gig sounds odd, but if you go to the Premiere Pro CS5 Benchmark http://ppbm5.com/ page and review results, you will see that some people have 24 gig)
    As far as C drive size, I have Win7 64bit Pro and MS Office full install and CS5 Master Collection and some odds'n'ends, and I only use 50 gig of drive space, with as much as possible in the way of "work" files set to my 2 other drives
    My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0 includes a link to the computer I built
    My 3 hard drives are configured as...
    1 - 320G WD Win7 and all programs (50 used)
    2 - 320G WD Win7 swap file and PPro projects
    3 - 1T WD all video files... read and write

  • Sorry, a serious error has occured that requires adobe premiere elements to shut down. we will attem

    So I've had premiere elements 9 for a while and it always worked just fine, but one day right in the middle of working on a project i get this error message:
    sorry, a serious error has occured that requires adobe premiere elements to shut down.
    Why did this come up? I know I've plenty of free space and everything! Please if you know how to fix it then help!
    Some other info:
    My computer runs on windows 7
    Once again, the Premiere elements I'm using is 9
    Please if you know what to do please help!

    Yes Bill,
    I too have been very errant in turning off the CA Vet Security system , it too causes problems .
    Regards,
    Bob

  • Premiere Elements 9 - "Sorry, a serious error has occurred that requires Adobe Premiere Elements..(2)

    Hi,
    I have the exact same problem as described here but the solution proposed here didn't work:
    Premiere Elements 9 - "Sorry, a serious error has occurred that requires Adobe Premiere Elements....
    I'm still getting the message "Sorry, a serious error has occured that requires Adobe Premiere Elements to shut down.  We will attempt to save your current project.".
    I uninstalled, reboot, installed, reboot a few times and it still doesn't work.
    Any suggestions?  I'm using Premiere Elements 9 and Windows 7, 64 bits.  It was working before.  It started after I had to reformat my harddrive and reinstall everything.
    Thanks,

    ...By the way, when you did that and deletion of the Adobe Premiere Elements Prefs deletion did not resolve the problem, did you then delete the whole folder in which the Adobe Premiere Elements Prefs file exists?
    [YH] Yes I did but it didn't work.
    1. When you did the uninstall/reinstall, did you include a ccleaner run through between the uninstall and the reinstall? Good idea to do that to remove any leftovers from incomplete uninstall reinstalls.
    [YH] Done but didn't work. I just ran the CCleaner free version.  I'm not sure if it's enough.
    2. Do you have the 9.0.1 Update installed.
    [YH] Done but didn't work.
    Do you have the latest version of QuickTime installed on your computer
    [YH] I didn't have QuickTime installed.  It is now but didn't do any difference.  I uninstalled Adobe Premiere Elements, ran CCleaner, reboot, installed APE, reboot... still doesn't work.
    3. Are you running your computer from a User Account with Administrative Privileges as well as Run As Administrator (from right click of program desktop icon and selection of Run As Administrator?
    [YH] Yes
    4. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
    [YH] I'm assuming yes because it was working before.
    5. Does the problem exist with and without the antivirus program disabled?
    [YH] I haven't tried yet but see item number 6 below.
    6. Go to Computer/Manage/Services and Applications/Services and assure that FLEXnet Licensing Service is started.
    [YH] I don't see any FLEXnet.  I don't remember installing this on any computer.  I googled it but I'm not sure I understand what and from where to install it.  I checked at work on another computer running Adobe Premiere Elements and FLEXnet is running on that computer. So this might be the source of the problem.
    7. The following is a version 12 remedy, let us see if this will work for 9.0/9.0.1
    As described in the link below, rename the SLCache Folder and the SLStore Folder.
    http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
    [YH] Haven't tried it yet.

  • Another "Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save your current project."

    When I try an open the original project or a copy of it I get this message.
    "Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save your current project."
    I have tried to create a new project and get the same message.
    I have tried uninstalling and reinstalling the program a few times.
    The last time I worked on the project I had no issues.
    Any suggestions?

    Hi
    a. Open Premiere Elements 9.0/9.0.1 - Yes, I get the welcome screen (v9.0).  I can choose open project, and choose my project.  The program will open and show that it is loading the project with the scroll line will show all the way to 100% and will stay there.  Sometimes I get the "Sorry" message and sometimes the loading project window just goes away and nothing is loaded and the program stays on the clock until I close it.
    b. You can find the Adobe Premiere Elements Prefs file and deletion of it makes no difference to your issue. - Made no difference
    c. Have you deleted the whole 9.0 Folder in which the Adobe Premiere Elements Prefs file exists? If not, please do so. - Done, made no difference
    1. Does the problem exist with and without the antivirus and firewall(s) disabled? - Running McAfee Total Access Protection.  Turned off firewall and anti virus. It works.  As a test I left the anti virus off and tried loading project with and with out the firewall turned on.  The project loaded each time.  I then tested the firewall on, with and with out antivirus.  Antivirus off - project loads each time.  Antivirus on - doesn't load and program stays on clock.
    I will continue to experiment with it and see what happens.  The last time I used it I was running a different McAfee product than no.  So it seems to work with the Firewall on and the Antivirus off.

  • Premiere Elements 7, Sorry, a serious error has occurred  that requires Adobe Premiere Elements to..

    Hi, my software just recently started giving me the folowing error and it does not work (start):
    Sorry, a serious error has occured that requires Adone Premiere Elements to shut down. We will attempt to save your current project.
    I had tried everything, even uninstalling and reinstalling the program and still it does not work. Does anybody have this issue?
    Do you know how to fix it?

    I found the root casue of the problem. I just turn OFF the McAfee antivirun software and the Premiere Elements 7 works now. 
    I realized that McAfee updated the version on April 20 and i think this version has a problem with the Adobe Premiere Elements programm.

  • Premiere Elements 9 - "Sorry, a serious error has occurred that requires Adobe Premiere Elements....

    When I start up a new project in Premiere Elements 9, the only thing that comes up is the gray screen.  When I try to open any existing project, I get the following message:
    "Sorry, a serious error has occurred that requires Adobe Premiere Elements to shut down. We will attempt to save your current project."
    I have tried all of the suggestions on this website and still, nothing works.  Any help or suggestions would be greatly appreciated.
    Thanks!

    JerryK713
    First question that comes to mind is "Is this a never worked before type issue or it worked before but not now type issue?"
    What computer operating system is your Premiere Elements 9 running on? Do you have the Premiere Elements 9.0/9.0.1 Update installed? And, the typical drill questions, do you have the latest version of QuickTime installed and are you working from a User Account with Administrative Priviledges?
    Since Premiere Elements 9.0/9.0.1 is a 32 bit application, we would revisit the question of your computer resources...processor, installed/available RAM, free hard drive space? Is your computer optimized...defragmented, video and audio card drivers up to date, pile ups preview files and conformed video and audio files cleaned out? Scratch Disks directed to save location with enough free space to receive them?
    Have you checked to make sure that antivirus and firewalls are not contributing to or causing the issue?
    Another thought...are you running a dual (or more) monitor setup with your current video card?
    Please review and then we can decide what next.
    Thanks.
    ATR

  • How to get 64 bit version for premiere elements 12

    How to get  64-bit version for Premier Elements 12 ? 
    I download from ADMISY site.
    Click on win 64 bit and download it.
    When I try to install ther is a error  this download version is not for 64 bit I have try many times but same result

    Hello
    I have been away some days
    ADMISY is a software partners for Adobe
    I running Win 7 Home Edition
    I have received a card with a code when I bought the program and the I
    download from ADMISY
    Sending serial and installation warning
    PhotoshopElements_12_WWEFDJ.7z
    PhotoshopElements_12_WWEFDJ
    PremiereElements_12_WWEFDJ_win32.7z
    PremiereElements_12_WWEFDJ_win32
    I can not find a 64 bit version of 32-bit or 64-bit version of downloads
    This is information I have
    Best regards
    Erling Magnusson
    2015-02-04 22:33 GMT+01:00 Adobe Forums <[email protected]>:
        How to get 64 bit version for premiere elements 12  created by A.T.
    Romano <https://forums.adobe.com/people/A.T.+Romano> in *Premiere
    Elements* - View the full discussion
    <https://forums.adobe.com/message/7162950#7162950>

  • My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?

    My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?
    thanks

    for windows you should have an exe and a 7z file.  put both in the same directory and double click the exe.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Where can I find the PDF manual for Premiere Elements?

    Does Adobe have a full manual in PDF file format for Premiere Elements 9.0?
    P.S. Watch out for trying to handle large (> 700meg) AVI files.  Phone support says I'm SOL on bringing in my 6.5 gig 24 minute file.  Their solution?
    Bring it in small chunks or buy a new computer with more than 8gig of RAM.  Why don't they just tell you before you buy, that unless you have an awsome computer, don't waste your money on our software?

    Thanks John
    I have reviewed the online information, and the DVD's and still don't see a full blown manual (PDF file format or otherwise).  If all you get is the
    Using Adobe Premiere Elements 9
    Getting started with Adobe Premiere Elements
    Adobe Premiere Elements workspace
    Projects
    Capturing video
    , etc links
    Then you ain't getting much information.

  • Best laptop for Premiere Elements

    Can you recommend a laptop for Premiere Elements.
    I have PE9 and thinking about PE10.
    Preferably matte screen.
    UK based so Sager not really an option.
    Thanks

    Laptops are never best for video editing, since they're usually built for portability rather than power. They also cost about 50% more than desktops for the same amount of power.
    But what type of camcorder is your video coming from?
    If you are editign tape-based video, a dual-core processor and 4 gigs of RAM with a 500 gig hard drive should be adequate.
    If you are working with AVCHD video, you should go for a quad core or i7 processor running Windows 7 64-bit.

  • Cannot Install the Raw 7.3 update for Premiere Elements 11 and photoshop Elements

    I get an error message when I try to update the  Raw 7.3 update for Premiere Elements 11 and photoshop Elements. It says to run support adviser which I did, but it says that it could not detect any problems.
    Thanks,
    Ron

    The next step will be to review the installation logs for the cause of the installation failure.  You can find details on how to locate and interpret your installation logs at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.

  • How can i get live help for premiere elements 11

    how can i get live help with premiere elements 11

    Click I STILL NEED HELP at this next link for Premiere Elements chat
    -http://helpx.adobe.com/contact.html?product=premiere-elements&topic=activating-my-product- or-serial-number-issues

  • Hardware requirement for running exchange 2010 on vmware workstation

    Dear Team,I need to create a exchange 2010 sp2 on a guest os on vmware workstation.kindly help me out with the physical hardware requirements for a home user

    Hey Mukund26,
    Before I answer your questions, my suggestion would be for you to figure out exactly what you want to get out of running that Exchange lab.  Are you trying to learn Exchange features like DAGs?  Are you trying to learn about virtualizing Exchange?  When you figure that out you'll be better able to answer question 1 since you may not need all of those virtual machines.
    Here are my thoughts on your questions.
    1) It is probably technically possible to run 10 virtual machines on the configuration you have but you're going to have pretty bad performance. I would try to trim that down to only the virutal machines that you really need in order to use the lab how you want to use it.  Here are some questions that may help you figure out what you need:
    Why do you need two domain controllers?  I don't think you need to worry as much about redundancy in your lab. 
    Why do you need 2 ESXi hosts and a vCenter?  What purpose do they serve in this configuration?  Are you trying to run the Exchange VMs nested under the ESXi VMs?  If so, why?
    Is there a reason why you want to separate out HTS/CAS from MBX in your lab?   Combining all roles together can reduce the number of VMs you need.  If you separate out the roles you'll need to allocate a lot of RAM to support all of those Exchange VMs.
    2)  Running a lot of virtual machines on a single 1TB SATA disk, especially a 5400 RPM disk, is going to be slow.  It'll be especially painful when the VMs are booting up, rebooting, shutting down, etc..  Try to stagger the power on operations so they don't all boot at once.  For example, first boot your DCs, then boot your HTS/CAS, then your MBX, etc.   There is no doubt that configuration will be slow, so if you can get your hands on an solid state drive with enough space you'll have significantly better performance.  For the purposes of a lab, though, it is probably ok if you can be patient.
    3) I think the i5 processor will be just fine for this lab.  Usually in a lab setting CPU performance isn't the most important thing so similar to above as long as you can be a little patient I think that CPU will suit you just fine.
    As I said figure out what you want to get out of the lab and then you can determine how many VMs you need and whether or not you want to upgrade hardware.  If you're looking to learn about Exchange 2010 in general I would suggest using multirole servers, getting rid of one of the DCs, and not worrying about virtualizing ESX/vCenter so that you can learn.  If you're looking to learn about virtualizing Exchange 2010 on vSphere then let's figure out exactly what you want to get out of it and figure out what you can learn using VMware Workstation and what you really need vSphere for.
    Best of luck!
    Matt
    http://www.thelowercasew.com

Maybe you are looking for