Hardware requirements for SAP ERP 2005 using ECC 6.0

Hello everyone,
i am already new and need information about the min. hardware requirements for a SAP ERP 2k5 System using ECC 6.0 with IDES 7.10.
I read the Master Guides about ERP, but i am not even more clever than before.
The OS is MS Windows 2k3 Server EE.
The last information i had from another one to this configuration is:
1 dual-core cpu (? Ghz)
4-6 GB RAM
300 GB HDD
Does it fit? Can anyone help me out?
Thanks in advance.
Message was edited by:
        Marcel Jahn
Message was edited by:
        Marcel Jahn

Hi,
IDES 7.10?!?
If it's an IDES system you want to set up, HDD space may be the bottleneck. It's sufficient for installation, but you may run out of disk space since note <a href="https://service.sap.com/sap/support/notes/1013391">1013391</a> states
Hardware Requirement
                 MS-SQL  ORACLE   MaxDB   DB2 Win/Unix  AS/400
DB size (GB):    160     220      220          160       280
Since IDES is for education and training purposes only the rest should be sufficient.
I'm running an ERP 6.0 IDES system (32 bit) on a single core, 3.2 GHz, 4 GB RAM, 250 GB System and 500 GB SAP/DB HDD with pretty good response time.
Peter
Points always appreciated

Similar Messages

  • Hardware requirement for SAP E-Sourcing 5.0

    Hi,
    Can any one tell me please about hardware requirement for SAP E-Sourcing 5.0.
    Thanks
    Sanjay Rai

    Hi
    Frictionless SRM 2005 SP3 has been rename SAP E-Sourcing SAP E-Sourcing 4.2.00.
    For detailed SRM Installation, Upgrade, Heardware requirments, Please go through the details of the Release-Independent Related OSS Notes given below ->
    Note 1093204 - Object Migration (This Note contains a detailed ZIP file)
    Note 1122739 - SRM E-Sourcing 5.0 Patch B (5.0.00_B) Release Notes
    Note 1094095 - SRM 2005 SP1 Patch O (4.1.00_O) Release Notes
    Note 1094094 - SRM E-Sourcing 4.2 Patch L (4.2.00_L) Release Notes
    Note 1094092 - SRM E-Sourcing 4.2 SP4 (4.4.00) Release Notes
    Do let me know.
    Regards
    - Atul

  • Check Connection of Communication Arrangement for SAP ERP Financials Using IDoc Failed

    Dear experts,
    We are checking outbound connection from C4TE to ERP in Communication Arrangement for SAP ERP Financials Using IDoc Failed.
    We get the attached error message:
    Checking connection failed
    Error accessing service; Service Ping ERROR: Forbidden (403)
    What could be the reasons, in ERP side, through Tcode SMICM, we didn't see any log from C4TE side, and we cannot ping the ERP side successfully.
    One more thing, in C4TE, we tried to set the connection to an SAP internal ERP system, and the connection was successful. But when relinked to the customer ERP system, connection failed.
    Could it be firewalls reason?
    Thanks!
    Best regards,
    Wendy

    Hi Wendy,
    Yes the assumption could be one reason as well for the error (403 forbidden), but there could be several other aspects also to get the 403 error, for better understanding the reason for the error,  may I request you to create an incident send it to us.
    Also please try once running the scenario in C4T and check if the relevant documents are being sent through Outbound Service or not.
    Thanks & Regards,
    Bharath

  • Hardware required for SAP DMS Server

    hi all,
    my SAP system is  SAP ECC 6.0 EHP1 with oracle  OS is linux ,  if we install DMS server on this same sap system or on saparate system. how much hardware required for DMS server. our mostly will be imaging documents.
    Regards
    Khan

    Hi Khan,
    maybe the information in the SAP online help could be useful under http://help.sap.com/saphelp_erp60_sp/helpdata/en/b2/c043a66fab11d1949500a0c92f024a/content.htm
    Best regards,
    Christoph

  • Minimum Hardware Requirement for SAP Business One For HANA

    Hello EveryOne,
        I want to install SAP Business One for HANA (On Premises) Version on my Laptop. What would be the minimum hardware requirement for that so that it can run smoothly on the system.
    Is it can install on laptop or I need to buy giant server.
    Thanks in advance

    Hi Idrees,
    Check following links:
    http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_en.pdf
    http://help.sap.com/hana/SAP_HANA_Master_Guide_en.pdf
    http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_Unified_Installer_en.pdf
    http://help.sap.com/hana/SAP_HANA_Installation_Guide_en.pdf
    One more thing to note that you can use only HANA Certified Hardwares for B1 (Dell, Fujitsu, HP, IBM, HUAWEI)
    Hope it helps.
    Thanks & Regards
    Ankit Chauhan

  • Hardware requirement for sap system.

    Hello All,
    i want to install SAP on my local home PC.
    Kindly let me know the hardware requirment for this.
    So that i can

    If You want to install IDES 4.7EE
    Hard disk minimum 80 GB 120 GB or 160GB best
    Ram: Minimum 512 Mb 1 GB Best u can run in 256MB also
    Processor : Minimum PIII , PIV is best
    DVD Drive
    Remaining Normal
    If You want to install IDES ECC5.0  only R/3
    Hard disk minimum 160GB best 250 GB
    Ram: Minimum 1 GB  U can run in 512MB  alos
    Processor : Minimum  PIV
    DVD Drive
    Remaining Normal

  • Maximum user and hardware requirement for SAP B1

    Dear All,
    One of our prospect said that they will need 80 users and 160 connections to servers. And every year there will be additional user growth as much 30. What will be the hardware requirement for that ? has SAP B1 installed in that kind situation ? I appreciate your answer.
    Rgds,

    Mark,
    Please refer to the following PDF
    https://websmp206.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000270512007E&_SCENARIO=01100035870000000183&_ADDINC=
    Regarding 80 user initially with a growth of 30 user every year should not be a problem, but you might want to consider the volume of transactions to determine the performance aspect of the system.
    Also check the following link
    https://websmp206.sap-ag.de/smb/sbo/resources
    Good luck
    Suda

  • Hardware requirements for sap bw3.5 in windows environment

    Pls help me the hardware setup(harddisk,ram etc) required for SAP BW3.5 in windows environment.
    thanks in advance..
    Regards
    Ganesh

    Hi,
    HDD : 100GB
    RAM : 1 GB
    regards,
    Raju

  • Hardware requirements for SAP test server.

    Hi SAP Experts,
    We want to have a SAP test server for developing a prototype of SAP. Approx 12 users should be able to access this server
    concurrently.A industry specific solution (IS-Auto) also needs to installed over the standard SAP.
    Could you provide me the Hardware specifications required for this setup?.like the processor,ram,hard disk space ,etc...
    Awaiting your quick answers.
    Thanks and Regards,
    Umesh Karane.

    Hi Umesh. You need to read this http://service.sap.com/ides .Download  the documentation to that version which it is pleasant to you and in it there will be all corresponding information about hardware and e.t.c.
    Regards.

  • Hardware requirement for SAP HANA

    All,
    I am following all about HANA modelling and other related topics. Now, i am concentrating for the hardware part.
    Does SAP HANA requires separate hardware than that of existing ECC hardware? I mean can ECC instance & HANA run on same hardware or always it is required to run HANA on separate hardware?
    Regards,
    Sohil Shah.

    Hi Idrees,
    Check following links:
    http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_en.pdf
    http://help.sap.com/hana/SAP_HANA_Master_Guide_en.pdf
    http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_Unified_Installer_en.pdf
    http://help.sap.com/hana/SAP_HANA_Installation_Guide_en.pdf
    One more thing to note that you can use only HANA Certified Hardwares for B1 (Dell, Fujitsu, HP, IBM, HUAWEI)
    Hope it helps.
    Thanks & Regards
    Ankit Chauhan

  • Hardware Requirement for the SAP E-Sourcing 5.0

    Hi,
    Can any one tell me please about hardware requirement for SAP E-Sourcing 5.0.
    Thanks
    Sanjay Rai

    Hi Sanjay,
    May be this forum is not relevent.Hardware requirement mainly may depends on number of user licences which your company looking.also based on number applications which u r going to install....
    Rgds,
    Gadde.

  • Technical Usage for SAP ERP 6.0 EhP4

    Hello gurus,
    I am planning to upgrde my system EC2 which is an SAP ERP 6.0 on an Oracle10g database with OS Windows Server 2003.
    But I dont know which technical usage to choose.
    Using the url http://<hostname>:5<instance number>00/utl/UsageTypesInfo, the following are my system's usage types:
    SAP ERP 2005/SR2     XSS     XSS     Self Services
    SAP ERP 2005/SR2     LSOCP     LSOCP     Learning Solution Content Player
    SAP ERP 2005/SR2     BD     BD     Biller Direct
    SAP ERP 2005/SR2     XECO     XECO     Extended E-Selling Components
    SAP ERP 2005/SR2     ECC     ECC     Central Component
    SAP ERP 2005/SR2     BP-ERP     BP ERP     Business Packages (Portal Content)
    SAP NetWeaver 2004s/SR2     PI     PI     Process Integration
    SAP NetWeaver 2004s/SR2     BI     BI Java     BI Java
    SAP NetWeaver 2004s/SR2     AS     AS Java     Application Server Java
    SAP NetWeaver 2004s/SR2     EPC     EP Core     Enterprise Portal Core Components
    SAP NetWeaver 2004s/SR2     EP     EP     Enterprise Portal
    SAP NetWeaver 2004s/SR2     AAS     AS ABAP     Application Server ABAP
    There seems to be no direct equivalent of these usage types in the technical usages I see on MOPZ.
    Please advise.
    Thanks, Cha Cha

    Hello,
    You may check the attachments in note 1165438 for business function -> technical usage equivalence.
    as for usage types, you seem to have listed product instances instead.  Perhaps you can also have a look at the product instances -> technical usages equivalences in the attachments to note  1165438
    Anyway, the technical usagesI can see right away are:
    - SAP Learning Sol-Frontend CP
    - XSS Self Services
    - SAP FSCM - Biller Direct
    - Central applications
    - SAP XECO
    Netweaver 7 app server ABAP, Netweaver PI, and Enterprise Portal product instances don't have any additional technical usages assigned.
    I suggest also the service http://service.sap.com/bfp for a free service that will help you to select technical usages in your EHP4 install.
    Best regards,
    Miguel Ariñ

  • Hardware requirement for Using SAP ECC 6.0 (IDES)

    Hi
    I am planning to buy a Laptop for Learning more about SAP modules. I am planning to install ECC 5.0 or 6.0 on the laptop.
    Can any one tell me about the minimum configration required for SAP IDES installation. If possible please let me know the processor to be used, the speed of the processor, the RAM and HDD required.
    Also Kindly let me know from where do we get the IDES licence version of ECC 5.0 / ECC 6.0
    Piyush

    Hi
    <b>Please go through the following SAP OSS Notes -></b>
    Note 822208 - IDES mySAP ERP ECC 5.0 SR1
    Note 982228 - Installation KJEPS 601 on SAP ECC 6.0
    Note 1070948 - SAP Best Practices Baseline Package PL based on ECC 6.0
    Note 748977 - INST: mySAP ERP 04 ABAP on iSeries
    Note 855498 - Installation Prerequisite Checker
    Note 1012486 - Important Information on upgrading ERP-Systems in HA-Setups
    Note 855897 - SAP Business Suite 2005 Installation:IBM eServer iSeries
    Note 989368 - Upgrade to SAP ECC 600 with VIRSA 400_700
    Note 1034686 - Installation: Leasing Strategic Improvements on ECC 6.0
    <u>Please Contact local SAP support from this link below</u>
    https://websmp209.sap-ag.de/~form/handler?_APP=00200682500000002025&_EVENT=DISPLAY&SELAREA=501100035870000000694#
    Do let me know.
    Regards
    - Atul

  • Differences between Product Version SAP ERP 2005 and SAP ECC 6.0

    Hello Guys,
    I have to setup an new XI interface between two R/3 system. During Integration Scenario setup you have to select under Application Component Type the Product version for the R/3 systems.
    Now, i am able to select SAP ERP 2005 or SAP ECC 6.0 from menu
    Could someone tell me the differences between SAP ERP 2005 and SAP ECC 6.0. Both are listed as Product Versions.
    Thanks in advance!
    Jochen

    SAP ECC 6.0 is latest version 2005 is last year version . as you are intergatin between 2 . you need select accordingly our source and target.
    let me know you still require any doubt
    Thanks
    Sreeram
    Message was edited by:
            Sreeram Reddy

  • Hardware Requirements for ECC 6.0

    Hi everyone.
    Can anyone tell me the hardware requirements for ECC 6.0 with RAID implementation
    OR
    Any link where i can find the information.
    **i did check in the market place***
    Thank you
    Kiran Kumar

    Hi,
    Begin in http://service.sap.com/quicksizing for hardware requirements in SAPS(processing), memory and disk space. Then check in installation guides http://service.sap.com/instguides the best configuration
    of the disks in RAID. Basically:
    RAID 1 - database server program files
    RAID 5 - data files SAP
    RAID 1 - transaction log file
    Best regards,
    Roger Vier

Maybe you are looking for