Hardware Requirements to get Satisfactory Resolution and Reconstruction from a Kinect V2 Scan
I am new to the Kinect for Windows V,2 (KFW2) Sensor, and as a prospective hobbyist
I am finding it difficult to determine the ”best for me” hardware requirements to acquire a satisfactory resolution and reconstruction from a scan to use in a 3D printer.
Please excuse and correct any mistaken impressions I expose in the following overview of what I have learned so far.
It seems that the measure of success to achieve my goal is to achieve 30 Frames per Second (fps) using applications such as Fusion Explorer and 3DBuilder while making a acan.
After watching many video demos I have determined that the stated minimum system requirements published by Microsoft are focused on just getting the KFW2 sensor to actually “work” and have a mesh constructed regardless of quality. Beautiful models have been
build using these applications, but in many of them I have heard both explicit and implicit comments that the computer used was much more capable than the stated minimum. In fact, in one such video the Microsoft presenter said words to the effect that “…we
have some high-end computers here but you need more than that to get good results in real time...” In many cases a Surface Pro 3 was somewhere in the scene. Well I am using a Surface Pro 3 i7, and I do not get satisfactory results.
So my question is, “Has anyone achieved a frame rate of 30 fps with Fusion Explorer and/or 3D builder? If so would you mind sharing the make and model of the computer you used, or the specs of the components you used (CPU, GPU, USB 3.0 controller, etc.)
if you built your own custom computer.
Thanks in advance
jperry
Hi JPerry,
I have a laptop with a 4GB 680m and a intel i7-3820qm (USB 3.0 eXtensible) and get a solid 30 fps fusion which takes around 60% GPU load with a 640 vox/m 256x256x512 grid. FPS drops to 17-20 when I increase the numbers to 768 vox/m, 512x512x768 grid.
On my Surface Pro 3 256GB i5-4300U I can get a decent 20-25 fps with 384 vox/min 128x128x128.
Fusion is very memory intensive, hence the frame rate dependency on volume size. I think in the original Fusion paper they mention that each voxel element takes up 32bits of memory so for 512x512x512 it takes up 512MB of GPU memory.
I would say anything with 1.5GB of GPU memory, later than a (desktop) nvidia GTX 660 (or AMD equivalent) should get you a solid 30 fps unless you use huge volumes, then I would consider using some of the fusion alternatives such as Voxel Hashing or KinFu
Large Scale.
http://www.graphics.stanford.edu/~niessner/niessner2013hashing.html
http://pointclouds.org/documentation/tutorials/using_kinfu_large_scale.php
Although you may have to do some work getting those working with the v2.
Similar Messages
-
Unable to get Material No and Description from VBAP
Hi Gurus
Can anyone please help me to get material number and description from vbap table, The report is fine but I am unable to get material no and description.
regards
report ZCHGDOC_BY_SALES no standard page heading
line-size 132.
type-pools:
slis. " ALV types
Tables
tables:
cdhdr, " Change documents: Header
cdpos, " Change documents: Items
vbak, " Sales order: Header
mara, " Material No
user_addr, " User Address
vbap. " Contract order: Items
Types
types:
begin of ty_cdhdr,
objectclas like cdhdr-objectclas, " Object class
objectid like cdhdr-objectid, " Object value
changenr like cdhdr-changenr, " Document change number
username like cdhdr-username, " Changed by
udate like cdhdr-udate, " Changed on
utime like cdhdr-utime, " Changed at
tcode like cdhdr-tcode, " Transaction code
end of ty_cdhdr,
ty_it_cdhdr type ty_cdhdr occurs 0,
begin of ty_cdpos,
objectclas like cdpos-objectclas, " Object class
objectid like cdpos-objectid, " Object value
changenr like cdpos-changenr, " Document change number
tabname like cdpos-tabname, " Table name
tabkey like cdpos-tabkey, " Table key
fname like cdpos-fname, " Field name
chngind like cdpos-chngind, " Change indicator
value_new like cdpos-value_new, " New value of field
value_old like cdpos-value_old, " Old value of field
end of ty_cdpos,
ty_it_cdpos type ty_cdpos occurs 0,
begin of ty_dd03l,
tabname like dd03l-tabname,
fieldname like dd03l-fieldname,
as4local like dd03l-as4local,
as4vers like dd03l-as4vers,
rollname like dd03l-rollname,
end of ty_dd03l,
ty_it_dd03l type ty_dd03l occurs 0,
begin of ty_dd04t,
rollname like dd04t-rollname,
ddlanguage like dd04t-ddlanguage,
as4local like dd04t-as4local,
as4vers like dd04t-as4vers,
scrtext_l like dd04t-scrtext_l,
end of ty_dd04t,
ty_it_dd04t type ty_dd04t occurs 0,
begin of ty_kna1,
kunnr like kna1-kunnr, " Customer number
name1 like kna1-name1, " Customer name
end of ty_kna1,
ty_it_kna1 type ty_kna1 occurs 0,
begin of ty_user_addr,
bname like user_addr-bname, " user no
name_textc like user_addr-name_textc , " Username
end of ty_user_addr,
ty_it_user_addr type ty_user_addr occurs 0,
begin of ty_vbap,
matnr like vbap-matnr, " Material No
arktx like vbap-arktx, " Production Description
end of ty_vbap,
ty_it_vbap type ty_vbap occurs 0,
ty_text(500) type c,
ty_lines type tline,
ty_it_lines type ty_lines occurs 0,
begin of ty_merged,
vbeln like vbak-vbeln, " Sales order number
erdat like vbak-erdat, " Created on
auart like vbak-auart, " Order type
faksk like vbak-faksk, " Billing block in SD document
netwr like vbak-netwr, " Net value
waerk like vbak-waerk, " Currency
vkorg like vbak-vkorg, " Sales organisation
vtweg like vbak-vtweg, " Distribution channel
vkbur like vbak-vkbur, " Sales office
fkara like vbak-fkara, " Proposed billing type
kunnr like vbak-kunnr, " Sold-to party
bname like vbak-bname , " User No
xblnr like vbak-xblnr, " Reference
fbuda like vbkd-fbuda, " Date services rendered
username like cdhdr-username, " Changed by
udate like cdhdr-udate, " Changed on
utime like cdhdr-utime, " Changed at
tcode like cdhdr-tcode, " Transaction code
tabname like cdpos-tabname, " Table name
tabkey like cdpos-tabkey, " Table key
fname like cdpos-fname, " Field name
chngind like cdpos-chngind, " Change indicator
value_new like cdpos-value_new, " New value of field
value_old like cdpos-value_old, " Old value of field
scrtext_l like dd04t-scrtext_l, " Description of field
intnote type ty_text, " Internal note
hdrnote type ty_text, " Header note
name1 like adrc-name1, " Sold-to party name
matnr like vbap-matnr, " Material No
arktx like vbap-arktx, " Product Description
end of ty_merged,
ty_it_merged type ty_merged occurs 0,
begin of ty_vbak,
vbeln like vbak-vbeln, " Sales order number
erdat like vbak-erdat, " Created on
auart like vbak-auart, " Order type
faksk like vbak-faksk, " Billing block in SD document
netwr like vbak-netwr, " Net value
waerk like vbak-waerk, " Currency
vkorg like vbak-vkorg, " Sales organisation
vtweg like vbak-vtweg, " Distribution channel
vkbur like vbak-vkbur, " Sales office
fkara like vbak-fkara, " Proposed billing type
kunnr like vbak-kunnr, " Sold-to party
xblnr like vbak-xblnr, " Reference
objectid like cdhdr-objectid, " Change document object
end of ty_vbak,
ty_it_vbak type ty_vbak occurs 0,
begin of ty_vbkd,
vbeln like vbkd-vbeln, " Sales order number
posnr like vbkd-posnr, " Sales order item
fbuda like vbkd-fbuda, " Date services rendered
end of ty_vbkd,
ty_it_vbkd type ty_vbkd occurs 0.
Internal tables
data:
it_cdhdr type ty_it_cdhdr,
it_cdpos type ty_it_cdpos,
it_fieldcat type slis_t_fieldcat_alv,
it_kna1 type ty_it_kna1,
it_user_addr type ty_it_user_addr,
it_merged type ty_it_merged,
it_vbak type ty_it_vbak,
Material No
it_vbap type ty_it_vbap,
it_vbkd type ty_it_vbkd.
data:
wa_vbak type ty_vbak.
data:
st_tvariant like disvariant,
st_variant like disvariant.
constants:
co_as4local_a like dd03l-as4local " Active version
value 'A',
co_objectclas_verkbeleg like cdhdr-objectclas
value 'VERKBELEG',
co_posnr_initial like vbkd-posnr " Initial item number
value is initial,
co_posnr_initial_2 like vbap-posnr " Initial item number
value is initial,
co_save_u type c " User display variant
value 'U', " saving allowed.
co_trvog_0 like vbak-trvog " Sales order
value '0'.
data:
va_exit type c, " ALV display
va_tabix like sy-tabix.
selection-screen: begin of block b1 with frame title text-001.
select-options:
s_vkorg for vbak-vkorg OBLIGATORY, " Sales organisation
s_vkbur for vbak-vkbur, " Sales office
s_vtweg for vbak-vtweg, " Distribution channel
s_vbeln for vbak-vbeln, " Sales order number
s_usrnme for cdhdr-username, " Changed by
s_udate for cdhdr-udate. " Changed on
selection-screen: end of block b1,
begin of block b2 with frame title text-002.
parameters:
p_varint like disvariant-variant. " Display variant.
selection-screen: end of block b2.
Initialization
initialization.
Load display variant.
if not p_varint is initial.
move st_variant to st_tvariant.
move p_varint to st_tvariant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = co_save_u
changing
cs_variant = st_tvariant.
st_variant = st_tvariant.
else.
clear st_variant.
st_variant-report = sy-repid.
endif.
at selection-screen on value-request for p_varint.
Provide display variant list for this program.
call function 'REUSE_ALV_VARIANT_F4'
exporting
is_variant = st_variant
i_save = co_save_u
importing
e_exit = va_exit
es_variant = st_tvariant
exceptions
not_found = 2.
if sy-subrc eq 2.
message id sy-msgid type 'S'
number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
if va_exit eq space.
st_variant = st_tvariant.
p_varint = st_tvariant-variant.
endif.
endif.
At selection screen
at selection-screen.
Load display variant.
if not p_varint is initial.
move st_variant to st_tvariant.
move p_varint to st_tvariant-variant.
call function 'REUSE_ALV_VARIANT_EXISTENCE'
exporting
i_save = co_save_u
changing
cs_variant = st_tvariant.
st_variant = st_tvariant.
else.
clear st_variant.
st_variant-report = sy-repid.
endif.
Start of selection
Extract order details from VBAK
select vbeln erdat auart faksk netwr waerk vkorg vtweg vkbur fkara
kunnr xblnr
from vbak
into table it_vbak
where vkorg in s_vkorg
and vkbur in s_vkbur
and vbeln in s_vbeln.
if sy-subrc ne 0.
No data found for selection
message s001(zgen).
exit.
endif.
loop at it_vbak into wa_vbak.
va_tabix = sy-tabix.
wa_vbak-objectid = wa_vbak-vbeln.
modify it_vbak from wa_vbak
index va_tabix
transporting objectid.
endloop.
if sy-subrc ne 0.
No data found for selection
message s001(zgen).
exit.
endif.
loop at it_vbak into wa_vbak.
va_tabix = sy-tabix.
wa_vbak-objectid = wa_vbak-vbeln.
modify it_vbak from wa_vbak
index va_tabix
transporting objectid.
endloop.
Extract Change data
select objectclas objectid changenr username udate utime tcode
from cdhdr
into table it_cdhdr
for all entries in it_vbak
where objectclas eq co_objectclas_verkbeleg
and objectid eq it_vbak-objectid
and username in s_usrnme
and udate in s_udate.
if sy-subrc eq 0.
select objectclas objectid changenr tabname tabkey fname chngind
value_new value_old
from cdpos
into table it_cdpos
for all entries in it_cdhdr
where fname NE 'CMPRE_FLT'
and objectclas eq it_cdhdr-objectclas
and objectid eq it_cdhdr-objectid
and changenr eq it_cdhdr-changenr.
endif.
Extract customer details from KNA1
select kunnr name1
from kna1
into table it_kna1
for all entries in it_vbak
where kunnr eq it_vbak-kunnr.
---- Changes are made here -
Extract Material details from vbap
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial.
-----------------End of Change ----------------------*
Extract Contract No from vbkd.
select vbeln posnr fbuda
from vbkd
into table it_vbkd
for all entries in it_vbak
where vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial.
perform merge_data tables it_cdhdr
it_cdpos
it_kna1
it_user_addr
it_merged
it_vbak
it_vbap
it_vbkd.
if it_merged[] is initial.
message s001(zgen).
exit.
endif.
Release memory no longer required.
free: it_cdhdr,
it_cdpos,
it_kna1,
it_user_addr,
it_vbak,
it_vbap,
it_vbkd.
Build field catalog for call to report function
perform build_field_catalog tables it_fieldcat.
Output report.
perform output_report tables it_fieldcat
it_merged.
*& Form merge_data
text
form merge_data tables pa_it_cdhdr type ty_it_cdhdr
pa_it_cdpos type ty_it_cdpos
pa_it_kna1 type ty_it_kna1
pa_it_user_addr type ty_it_user_addr
pa_it_merged type ty_it_merged
pa_it_vbak type ty_it_vbak
pa_it_vbap type ty_it_vbap
pa_it_vbkd type ty_it_vbkd.
Local internal tables
data:
lit_dd03l type ty_it_dd03l,
lit_dd04t type ty_it_dd04t.
Local work areas
data:
lwa_cdhdr type ty_cdhdr,
lwa_cdpos type ty_cdpos,
lwa_dd03l type ty_dd03l,
lwa_dd04t type ty_dd04t,
lwa_kna1 type ty_kna1,
lwa_user_addr type ty_user_addr,
lwa_merged type ty_merged,
lwa_vbak type ty_vbak,
lwa_vbap type ty_vbap,
lwa_vbkd type ty_vbkd.
Local variables
data:
lva_dd03l_tabix like sy-tabix,
lva_dd04t_tabix like sy-tabix.
Sort Data
sort pa_it_cdhdr by objectid changenr.
sort pa_it_cdpos by objectid changenr tabname tabkey fname.
sort pa_it_kna1 by kunnr.
sort pa_it_user_addr by bname.
sort pa_it_vbak by vbeln.
sort pa_it_vbkd by vbeln.
loop at pa_it_vbak into lwa_vbak.
clear lwa_merged.
Assign sales order fields to reporting work area
lwa_merged-vbeln = lwa_vbak-vbeln.
lwa_merged-erdat = lwa_vbak-erdat.
lwa_merged-auart = lwa_vbak-auart.
lwa_merged-faksk = lwa_vbak-faksk.
lwa_merged-netwr = lwa_vbak-netwr.
lwa_merged-waerk = lwa_vbak-waerk.
lwa_merged-vkorg = lwa_vbak-vkorg.
lwa_merged-vtweg = lwa_vbak-vtweg.
lwa_merged-vkbur = lwa_vbak-vkbur.
lwa_merged-fkara = lwa_vbak-fkara.
lwa_merged-kunnr = lwa_vbak-kunnr.
lwa_merged-bname = 1wa_user_addr-bname.
lwa_merged-xblnr = lwa_vbak-xblnr.
Assgin Material to reporting work area
lwa_merged-matnr = lwa_vbap-vbeln.
Get name of sold-to party from PA_IT_KNA1
clear lwa_kna1.
read table pa_it_kna1 into lwa_kna1
with key kunnr = lwa_vbak-kunnr
binary search.
lwa_merged-name1 = lwa_kna1-name1.
Get name from PA_it_user_addr
clear lwa_user_addr.
read table pa_it_user_addr into lwa_user_addr
with key = lwa_user_addr-bname
binary search.
lwa_merged-username = lwa_user_addr-name_textc.
Get business data from PA_IT_VBKD.
clear lwa_vbkd.
read table pa_it_vbkd into lwa_vbkd
with key vbeln = lwa_vbak-vbeln
binary search.
lwa_merged-fbuda = lwa_vbkd-fbuda.
Get Material Data
clear lwa_vbap.
read table pa_it_vbap into lwa_vbap
with key matnr = lwa_vbap-matnr
with key vbeln = lwa_vbak-vbeln
binary search.
lwa_merged-arktx = lwa_vbap-arktx.
Get internal note text for sales order
perform read_text using '0002'
'1'
lwa_merged-vbeln
'VBBK'
lwa_merged-intnote.
Get header note 1 text for sales order
perform read_text using 'Z002'
'1'
lwa_merged-vbeln
'VBBK'
lwa_merged-hdrnote.
Determine if change documents exist for sales order.
clear lwa_cdhdr.
read table pa_it_cdhdr into lwa_cdhdr
with key objectid = lwa_vbak-objectid.
if sy-subrc ne 0.
continue.
endif.
loop at pa_it_cdhdr into lwa_cdhdr
from sy-tabix.
lwa_merged-username = lwa_cdhdr-username.
lwa_merged-udate = lwa_cdhdr-udate.
lwa_merged-utime = lwa_cdhdr-utime.
lwa_merged-tcode = lwa_cdhdr-tcode.
clear lwa_cdpos.
read table pa_it_cdpos into lwa_cdpos
with key objectid = lwa_cdhdr-objectid
changenr = lwa_cdhdr-changenr
binary search.
loop at pa_it_cdpos into lwa_cdpos
from sy-tabix.
lwa_merged-tabname = lwa_cdpos-tabname.
lwa_merged-tabkey = lwa_cdpos-tabkey.
lwa_merged-fname = lwa_cdpos-fname.
lwa_merged-chngind = lwa_cdpos-chngind.
lwa_merged-value_new = lwa_cdpos-value_new.
lwa_merged-value_old = lwa_cdpos-value_old.
Get description for field - determine date element
clear lwa_dd03l.
read table lit_dd03l into lwa_dd03l
with key tabname = lwa_cdpos-tabname
fieldname = lwa_cdpos-fname
binary search.
lva_dd03l_tabix = sy-tabix.
if sy-subrc ne 0.
select single tabname fieldname as4local as4vers rollname
from dd03l
into lwa_dd03l
where tabname eq lwa_cdpos-tabname
and fieldname eq lwa_cdpos-fname
and as4local eq co_as4local_a.
if sy-subrc eq 0.
insert lwa_dd03l into lit_dd03l
index lva_dd03l_tabix.
endif.
endif.
If data element was found, get description
if not lwa_dd03l is initial.
clear lwa_dd04t.
read table lit_dd04t into lwa_dd04t
with key rollname = lwa_dd03l-rollname
ddlanguage = sy-langu
binary search.
lva_dd04t_tabix = sy-tabix.
if sy-subrc ne 0.
select single rollname ddlanguage as4local as4vers scrtext_l
from dd04t
into lwa_dd04t
where rollname eq lwa_dd03l-rollname
and ddlanguage eq sy-langu.
if sy-subrc eq 0.
insert lwa_dd04t into lit_dd04t
index lva_dd04t_tabix.
else.
lwa_dd04t-scrtext_l = 'Description for field not found'.
endif.
endif.
endif.
lwa_merged-scrtext_l = lwa_dd04t-scrtext_l.
append lwa_merged to pa_it_merged.
at end of changenr.
Only process field changes for this change document.
exit.
endat.
endloop.
at end of objectid.
Initialise work area so we know change document for order has
been processed.
clear lwa_merged.
Only process change documents for this sales order.
exit.
endat.
endloop.
endloop.
endform. " merge_data
*& Form build_field_catalog
text
form build_field_catalog tables pa_it_fieldcat type slis_t_fieldcat_alv.
data:
Local variable
lva_col_pos type slis_fieldcat_alv-col_pos,
Local structure
st_fieldcat type slis_fieldcat_alv.
lva_col_pos = 0.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VBELN'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VBELN'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VKBUR'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VKBUR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VKORG'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'VKORG'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'KUNNR'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'KUNNR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
st_fieldcat-outputlen = '6'.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'NAME1'.
st_fieldcat-ref_tabname = 'KNA1'.
st_fieldcat-ref_fieldname = 'NAME1'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '15'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'MATNR'.
st_fieldcat-ref_tabname = 'VBAP'.
st_fieldcat-ref_fieldname = 'MATNR'.
st_fieldcat-row_pos = '1'.
st_fieldcat-col_pos = lva_col_pos.
st_fieldcat-outputlen = '6'.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'SCRTEXT_L'.
st_fieldcat-ref_tabname = 'DD04T'.
st_fieldcat-ref_fieldname = 'SCRTEXT_L'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'UDATE'.
st_fieldcat-ref_tabname = 'CDHDR'.
st_fieldcat-ref_fieldname = 'UDATE'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '10'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'USERNAME'.
st_fieldcat-ref_tabname = 'CDHDR'.
st_fieldcat-ref_fieldname = 'USERNAME'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '6'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'FNAME'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'FNAME'.
st_fieldcat-row_pos = '4'.
st_fieldcat-outputlen = '8'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'CHNGIND'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'CHNGIND'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '8'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'WAERK'.
st_fieldcat-ref_tabname = 'VBAK'.
st_fieldcat-ref_fieldname = 'WAERK'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '5'.
st_fieldcat-col_pos = lva_col_pos..
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VALUE_NEW'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'VALUE_NEW'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
clear st_fieldcat.
add 1 to lva_col_pos.
st_fieldcat-tabname = 'PA_IT_MERGED'.
st_fieldcat-fieldname = 'VALUE_OLD'.
st_fieldcat-ref_tabname = 'CDPOS'.
st_fieldcat-ref_fieldname = 'VALUE_OLD'.
st_fieldcat-row_pos = '1'.
st_fieldcat-outputlen = '20'.
st_fieldcat-col_pos = lva_col_pos.
append st_fieldcat to pa_it_fieldcat.
endform. " build_field_catalog
*& Form output_report
text
form output_report tables pa_it_fieldcat type slis_t_fieldcat_alv
pa_it_merged type ty_it_merged.
Local variables
data:
lva_formname type slis_formname,
lva_repid like sy-repid.
lva_repid = sy-repid.
lva_formname = 'ALV_USER_COMMAND'.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = lva_repid
i_callback_user_command = lva_formname
i_save = 'A'
is_variant = st_variant
it_fieldcat = pa_it_fieldcat[]
tables
t_outtab = pa_it_merged
exceptions
program_error = 1
others = 2.
endform. " output_report
*& Form alv_user_command
text
form alv_user_command using pa_ucomm like sy-ucomm
pa_selfield type slis_selfield.
Local work areas
data:
lwa_merged type ty_merged.
clear lwa_merged.
read table it_merged into lwa_merged
index pa_selfield-tabindex.
case pa_selfield-fieldname.
when 'VBELN'.
Contract Number
set parameter id 'AUN' field lwa_merged-vbeln.
call transaction 'VA03' and skip first screen.
S_BCE_68001393
when 'USERNAME'.
Username
set parameter id 'username' field lwa_merged-username.
call transaction 'S_BCE_68001393' and skip first screen.
when 'KUNNR'.
Customer number
set parameter id 'KUN' field lwa_merged-kunnr.
set parameter id 'VKO' field space.
set parameter id 'VTW' field space.
set parameter id 'SPA' field space.
call transaction 'XD03' and skip first screen.
endcase.
endform. " alv_user_command
*& Form read_text
text
form read_text using pa_id
pa_inline_count
pa_name
pa_object
pa_text.
Local internal tables
data:
lit_inlines type ty_it_lines,
lit_lines type ty_it_lines.
Local work areas
data:
lwa_lines type ty_lines.
Local variables
data:
lva_tdname like thead-tdname.
refresh: lit_inlines,
lit_lines.
lva_tdname = pa_name.
call function 'READ_TEXT_INLINE'
exporting
id = pa_id
inline_count = pa_inline_count
language = sy-langu
name = lva_tdname
object = pa_object
tables
inlines = lit_inlines
lines = lit_lines
exceptions
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
others = 7.
loop at lit_lines into lwa_lines.
concatenate pa_text
lwa_lines-tdline
into pa_text separated by space.
endloop.
endform. " read_text ENDLOOP.Hi
As per your code here:
"-------------- Changes are made here ----------------
*Extract Material details from vbap
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln
and posnr eq co_posnr_initial. " Here the condition specifies you want to select sales order items where there is no item number, which i beleive shouldnt be the case
" -----------------End of Change ----------------------
Try as below by commenting the Item Number is INITIAL condition:
select matnr arktx
from vbap
into table it_vbap
for all entries in it_vbak
where
vbeln eq it_vbak-vbeln.
"and posnr eq co_posnr_initial.
Regards
Eswar -
my old computer is broken, so how do i get my music and photos from my iPod onto iTunes on my new computer. It says it can only be synced to 1. but my old 1 is broken.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
Keep in mind that the recovered photos will not be in their full resolution, but instead will be the scaled down versions that were optimized in size and resolution to fit your iPod's smaller LCD screen.
B-rock -
How can i know who get my photos and messages from my icloud???
How can i know who get my photos and messages from my icloud???
Nobody, except the persons who have your username and password or with whom you share photos streams would be able to see anything from you.
-
How can i know who get my photos and messages from my icloud???
The following website gives you an overview on how your iCloud data is encrypted: https://support.apple.com/kb/HT4865 So as long as you don not share your Apple ID with someone else, everything should be fine.
-
I'm new to Mac. I have an iPhone and a Mac Mini. My original iTunes was on a Windows computer that crashed. So, all of my iTunes Music and Movies are gone. How do I get the movies and music from my iPhone to the new Mac Mini?
If you still have the crashed Win computer, you may be able to recover your music and movies from the hard drive. If you have a friend with a hard drive USB connection kit and a PC, they should be able to help. Otherwise, check locally for computer services that might do that for you (I think Best Buy Geek Squad may be able to help). If the drive itself is in good shape, it shouldn't be too expensive.
-
my family and I share the same account of apple. I'm getting phone calls and messages from my mothers and my number and vice versa. is there anything we can do
The short solution is to go to Settings > FaceTime > iPhone Cellular Calls OFF.
However, as Csound points out, you should not really be sharing an Apple ID with anyone. See: How to Stop Sharing an Apple ID.
(Note that I am affiliated with that site, and some pages contain ads). -
How to get my photos and music from my iphone to my hp laptop without having windowed on my laptop
i just got anew hp laptop. it does not have windows. I want to be able to link my iphone with my laptop but don't know how. want to be able to get my photos and music from my phone to my laptop and be able to load music on to my ipod. Is this possible to do
I think there is still no APP or a way to copy music or videos from Iphone to PC. Pictures can be copied when you access the storage of the iphone from PC. Not sure if you are using other laptop before with itunes where you organize everything about your iphone. If you have, copy the Itunes folder from My Music folder and paste it on the new laptop you have, (you need to install Itunes first on your new laptop before doing this)
-
How do I get my contacts and calendars from Icloud to outlook?
I am sure this question has been asked before, but I cannot find the answer. My hard drive on my PC crashed recently. I installed a new one and downloaded my files. I have my mail working fine, but cannot figure how to get my calendars and contacts from icloud to outlook. I am using Outlook 2007 with Windows 7. Any help will be appreciated. Thanks Russ
Set up and log in to iCloud on both devices
Settings-iCloud - log in with your Apple ID & password -
How do I get my apps and music from my phone to itunes.
How do I get my apps and music from my phone to itunes.
See Recover your iTunes library from your iPod or iOS device.
tt2 -
how do i get my songs and data from my old mac onto my pc so that i can copy it onto my new ipod touch
jrswish wrote:
When I plugged in my new one it cleared all my song and apps out of my current itunes.
Are you sure of that? Check in the Library. Click on the Apps icon to see all apps. Similarly click on the Music icon to see the songs. -
i recently had to re-install Outlook on my laptop. How do I get my calendar and contacts from my phone to my Outlook?
Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
-
How do I get my bookmarks and contacts from my MacBook to my new iPad mini.
How do I get my bookmarks and contacts from my MacBook on to my new iPad mini?
If you used the same Apple ID to set both up they should be on your iPad Mini already.
Check this out.
http://www.apple.com/ios/ios8/continuity/ -
HT1848 how do i get my apps and music from my ipod to my iphone
how do i get my apps and music from my ipod touch to my iphone?????????
Either click here and follow the instructions, or follow those in the article you asked this question from and then sync the iPhone with that iTunes library.
(82400) -
Getting Day, month and year from Date object
hello everybody,
Date mydate = Resultset.getDate(indexField);
Now i would like to get day, month and year from mydate.
In another words, i'm looking for something equivalent to
mydate.getDay() as this method is deprecated.
Can somebody help me out please?
Thank you in advance,swvc2000,
Here is a sample class that demonstrates two ways in which to do this.import java.util.*;
import java.text.*;
public class DateSplitter {
public static void main(String args[]) {
/* even though your date is from a result set,
pretend the following date is your date that
you are using. The try catch block is used
because I hand-crafted my date using
SimpleDateFormat. Substitute your date.*/
Date yourDate = null;
try {
SimpleDateFormat formatter = new SimpleDateFormat("MM/dd/yyyy");
yourDate = formatter.parse("05/06/2000");
} catch (ParseException e) { }
//the following gets the current date
Calendar c = Calendar.getInstance();
//use the calendar object to set it to your date
c.setTime(yourDate);
//note months start at zero
int month = c.get(Calendar.MONTH);
int year = c.get(Calendar.YEAR);
int dayOfMonth = c.get(Calendar.DAY_OF_MONTH);
System.out.println("Calendar Month: "+month);
System.out.println("Calendar Day: "+dayOfMonth);
System.out.println("Calendar Year: "+year);
System.out.println();
/* Simple date format can also be used to strip them
out of your date object. When you use it, notice that
months start at 1. Also, it returns string values. If
you need integer values, you will have to use
Integer.parseInt() as I did below. If you are
only concerned about the string values, just remove
the Integer.parseInt part. */
DateFormat formatter = new SimpleDateFormat("M");
month = Integer.parseInt(formatter.format(yourDate));
System.out.println("SDF Month: "+ month);
formatter = new SimpleDateFormat("d");
dayOfMonth = Integer.parseInt(formatter.format(yourDate));
System.out.println("SDF Day: "+ dayOfMonth);
formatter = new SimpleDateFormat("yyyy");
year = Integer.parseInt(formatter.format(yourDate));
System.out.println("SDF Year: "+ year);
}//end main
}//end DateSplitter classtajenkins
Maybe you are looking for
-
How to auto-connect to external server upon startup?
Is there a way that a user could by-pass "Connect to Server" and have the workstation auto-connect to an external, but in-house server each time the work-station is booted up? Also, is there a way to have it connect to this server without having to e
-
Can One Export Contacts w/ iPad2?
The first thing I wanted to do when I purchased my iPad 2 wasto export my contacts from Backup Assistant to my brand new iPad 2. Only problem is the export feature on the website doesn't seem to be available on my iPad. How can I do this? All I want
-
What is the use of a separate strong CHAP/MS-CHAP password in the ACS user
what is the use of a separate strong CHAP/MS-CHAP password in the ACS user setup ? Document said it need to be supported by the AAA client. Do I need to configure anything in the AP ( AAA client ) to match this password?
-
How do I see a reply to my question
can not find the answers to any questions,only questions, where are the answers?How do I bring them up to read? This question was solved. View Solution.
-
Guys Doing file to file scenario. The transaction fails and throws an error message in RWB>>msg monitor that "Transmitting the message to end point http://<hostname>:<port>/sap/xi/engine?type=entry using connection failed. due to :Received HTTP respo