Hardware scaling not working

I am using Flash Catalyst CS5 and my project includes flash videos(flv-files).
When I publish it to swf and run it, the hardware scaling doesnt seem to work in fullscreen mode.
The videos looks much nicer when I use the adobe media player to show them in fullscreen mode.
I get the same result either if I run it on a PC or mac.
Is there a way to solve this?

Hi,
Flash Catalyst only supports fixed dimensions at the moment. Projects don't scale to the size of the users browser.
Take a look at this FAQ on liquid layouts. It may help you.
http://forums.adobe.com/thread/652613.
Best,
Tanya

Similar Messages

How can apple send out an os update that renders an important function of the software/hardware to not work? They knowingly have sent out this new os update for iPad which makes airplay nonfunctining! I need this for my business!

How can apple send out an os update that renders an important function of the software/hardware to not work? They knowingly have sent out this new os update for iPad which makes airplay nonfunctining! I need this for my business! I could understand if they didn't know, but it is all over the Internet! When I went in to have it revert back to os6 (which worked fine!) I was actually asked if I had done any research before I installed the upgrade! As if this is the consumer's fault for being dumb enough to fall for the upgrade!

That is not what I have discovered, nor what others have discovered, nor what I was told when I went the Genius Bar. I cannot remotely mirror to my MacBook Pro and it only started the day after I installed the upgrade. We tested it with an iPad that had not been upgraded, no problem.

Cpu frequency scaling not working and hdd powers down

Hi,
I recently made a fresh reinstall on my laptop keeping only my user settings (home directory) but no system-wide settings (/etc).
Now I have the following issues:
1) CPU frequency scaling does not work. KDE's PowerDevil tells me, my CPU does not have scaling capability and when I try to start cpufreq, I get this error message:
# /etc/rc.d/cpufreq start
:: Setting cpufreq governing rules , cpu 0 1Error setting new values. Common errors: [BUSY] - Do you have proper administration rights? (super-user?)ble_governors: No such file or directory
- Is the governor you requested available and modprobed?
- Trying to set an invalid policy?
- Trying to set a specific frequency, but userspace governor is not available,
for example because of hardware which cannot be set to a specific frequency
or because the userspace governor isn't loaded?
The governor modules are loaded:
# lsmod | grep cpufreq
cpufreq_userspace 2096 0
cpufreq_powersave 942 0
cpufreq_ondemand 7990 0
freq_table 2339 1 cpufreq_ondemand
cpufreq_conservative 9172 0
This used to work out-of-the box with the previous install so I'm a bit puzzled.
2) My hard drive powers down after a few seconds of inactivity, just to power up a few seconds later when it's accessed again. The hard drive never powered down on my previous installation. I do not have any power management daemons running and this behavior starts right after booting the machine, before I log in.
I would like to disable this "feature" since I think it's rather bad for the hard drive's health as well as battery life.
Any ideas?:)
EDIT: Cpu frequency scaling is fixed now, forgot to load the acpi_cpufreq module.:rolleyes: There's still the issue with the hard drive, though.
Last edited by Vortex375 (2010-06-28 14:54:27)

The HDD thing is caused by upowerd, dunno why though.
You can try: hdparm -B 254 <disk device>, but that wont solve the problem permanently, only till you plug and unplug again the AC supply.
you can also try killing upowerd and things will (at least that was the case for me) be alright.
Maybe this is upowerd bug?
Last edited by kralyk (2010-06-29 20:44:24)

Macbook dies after 2008-005 security update: even hardware test not working

My Macbook no longer boots after installing security update 2008-005. Behaves as if HD is dead, AND as if boots from SuperDrive are broken too.
Sequence of events:
1. 10.5.4, Software Update notifies me of update.
2. I permit it. Immediately requires a reboot.
3. Go away for several hours.
4. Upon return, I notice the Leopard outer-space background.
5. Spinning beachball when I move the mouse.
6. Go away for several minutes.
7. Return. No change. Power down computer.
OK ... by now, you may be saying that it might still have been updating and I shouldn't have interrupted it.
But since then, the machine behaves not only like the disk is dead, but I can't even get a hardware test to run from DVD.
So, to continue.
8. Start machine again. Apple boot sound. Nothing on screen.
9. After a while, flashing "folder" icon with question mark.
Since then I've attempted to boot in safe mode, verbose mode, FireWire target disk mode (against a 10.4.x box), boot from original install disk, boot into hardware test mode from original install disk. None of these things worked. I've reset the PRAM.
The only diagnostic activity of all of these that has produced any different feedback is the PRAM reset (which sounded the Apple boot sound a second time). Everything else does not work. If the HD was dead, I could understand that none of the attempts to boot into FireWire target disk mode, or to boot from DVD and then expect to see the HD mount in some way, would work. But since it doesn't even boot the hardware test from the DVD, I'm really baffled. Any ideas? Thanks.

Well, my solution was to buy DiskWarrior and copy what I could (which was a lot, thankfully) to a FireWire external disk, then reinstall. DiskWarrior reports S.M.A.R.T. status OK, so I've gone with a fresh partition in Disk Utility and successfully installed 10.4 from the original DVDs.
Have also run Apple Hardware Test and had no problems, so I've decided to trust the drive in the short term.
Unfortunately, now, 10.5 upgrade disks won't finish and guess what ... a partial install of 10.5 breaks the 10.4! So, the machine has a recognizable startup disk but justs sits in a loop rebooting itself, presumably as it hits some inter-10.4/10.5 state and gives up.
Next up I tried to restore my 10.5 from a wired ethernet connection to my Time Capsule. Having never once been able to browse my backups in Time Machine under 10.5, I was somewhat surprised to find that the 10.5 Installer was happy to let me try a restore from the Time Capsule. It crunched away until it was happy that I had enough space on my new partition, and then did what seemed a pretty instantaneous restore. The Macbook reboots and ... can't see the startup disk.
Maybe my disk really is on the way out.

Hardware buffering not working on Win XP Pro

Card: Audigy 2 Platinum with latest drivers (02.09.006)
Latest DirectX 9.0c (directx_dec2006_redist.exe)
DxDiag DirectSound test passes ok, except that at the end gives:
"Your card does not support hardware buffering. Sounds will only play back from software buffers."
Tested on Win XP Pro SP2, hardware buffering worked ok.
Solution?
Thanks,
Gustavs
Sound Devices
Description: SB Audigy 2 Audio [D880]
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_02&DEV_0004&SUBSYS_00202&REV_04
Manufacturer ID:
Product ID: 00
Type: WDM
Driver Name: ctaud2k.sys
Driver Version: 5.2.000.96 (English)
Driver Attributes: Final Retail
WHQL Logo'd: n/a
Date and Size: 8//2006 5:24:22, 853376 bytes
Other Files:
Driver Provider: Creative
HW Accel Level: Full
Cap Flags: 0xF5F
Min/Max Sample Rate: 00, 200000
Static/Strm HW Mix Bufs: 0, 0
Static/Strm HW 3D Bufs: 0, 0
HW Memory: 0
Voice Management: No
EAX(tm) 2.0 Listen/Src: No, No
I3DL2(tm) Listen/Src: No, No
Sensaura(tm) ZoomFX(tm): No
Registry: OK
Sound Test Result: All tests were successful.

Just found that the problem is probably something with RAM configuration (motherboard problem).
I have 4GB RAM, with Memory Hole disabled in bios it works ok, but then only shows ~2.2GB. I only get 2GB in Win XP Pro SP2 with Memory Hole enabled (x64 is ok, 4GB). I think this option is not working properly.
Gustavs

Cs4 - hardware rendering not working

The checkbox is LOCKED and set to software render by default!
I have updated to Bridge CS4 and now the slideshow and dinamic zoom are not working smoothly as on CS3.
How can I set the checkbox to Hardware?
Thanks,
Z
Graphic Card = Intel GMA 500 (latest drivers)
Bridge cs3 accepts render by hardware and it works smoothly!

Ok, here is some detail info of the issue:
On my netbook: CPU=1.6ghz, RAM=2Gb, VGA=Intel500, SSD@60mb/s
- Bridge cs3 = Hardware Render = impressive response time. [way beyond 30fps]
- Bridge cs3 = Software Render = <10fps
- Bridge cs4 = Hardware Render = not available
- Bridge cs4 = Software Render = 2 or maybe 3fps (!!!) Its a huge diference!
Come on Adobe, a loot of computers are/will be shipping this graphic card!
Just release a patch for us. Or think about it on cs5.
Z

Azure Web role scaling not working when using Reserved IP

Hi,
I am using autoscaling feature for long time now on my web role deployment. I've recently create new deployment (with same web role bits) to use a reserved IP. Since that moment, the autoscaling is NOT working anymore. I can see many AutoscaleAction failures
in the Management Portal Operation logs.
When I try to update the role instance count using REST call (via Azure Management Studio of Cerebrata), I get the following error:
Code: BadRequest
Message: A reserved IP cannot be added, removed or changed during deployment update or upgrade.
I cannot find anything about scaling and reserved IP on the net but I can't believe I am the only one in this situation ?!?!
Thanks for your help
Jean Bédard
Regards, Jean

Hi,
Refer to the
Publish Windows Azure Application Wizard on MSDN, specifically #7 in Configuration Your Settings.
When ‘Deployment Update’ is checked, only the changes since your last deployment will be pushed out to update your services. This is not possible when changing the virtual network settings of the service. To enable full deployments, you have two options:
Uncheck the ‘Deployment update’ checkbox
Click ‘Settings’ on the ‘Deployment update’ item, and select ‘If deployment can’t be updated, do a full deployment’.

Shift- constrained scaling not working

Hello,
When I hold down shift to scale an object or image to keep the proportions constrained, it does not work. This has only recently started to happen and it also happens on photoshop.
I don't have entourage running, which I read could be a culprit.
Would I need to reinstall my CS2?
I am using a Mac Powerbook G4, OSX 10.4.11
Adobe CS2
Thanks,
Mike

gangamon,
What Monika said.
I am trying to keep an updated list of offenders; so far it is as follows.
Quicktime/iTunes,
Quicken (Widget),
Entourage,
Google Earth,
Zune,
Some Firefox Add-ons,
Spotlight (shortcuts),
Fetch,
Hulu,
Cocktail,
Cinch.

My Iphone4s hardware is not working!!

I just bought an Iphone4s 2 months ago and its not working anymore. I cannot restore it (error 2001) nor turn it on. What should I do??? People told me that my iPhone had some problems with its hard ware. Is the warranty gonna cover this ??

Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604
Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.

X200: CPU frequency scaling not working in Windows 7 x64

Hi there, this is first posting here. Trust this issue has not been addressed before--if it has please redirect me to the post where this discussion happening.
Here is my hardware: X200, P8700, 2.53GHz, 4GB RAM, 7454-32U
I have just upgraded my RAM from 2GB and clean installed Windows 7 x64 (came with XP x86). I have also loaded all the drivers including the power manager driver and power manager from IBM/Lenovo support/download site. all hardware is working fine.
My only problem is that the fan is always on--running at about 3340RPM and blows all the time--temps are at around 42-46C. I have noticed that the CPU is quite, but firing at max all the time--does not scale down when no activity. tis happens when I select "power source optimized" on battery and on AC.
I have noticed that when in XP 32-bit, the CPU will come back at rest to 786MHz--and go up when needed.
Could someone please help me figure out what is goin gon here? I am so tired of looking and posting on other forums that I am about to go crazy. I love this machine, but my only issue now is this.
I have also checked the BIOS and set the CPU to "automatic" and Speed Step is on. I am using the latest BIOs version v3.11 Dec 2009.
Please help me.
Regards
S

Hi Jessica Thank you for the reply and also pointing me to the Upgrade Advisor links-Here is the output for the 64-bit Windows 7 Compatibility assessment--as you see there are no issues with Hardware compatibility. Also I have downloaded all the applicable drivers from Lenovo. The problem still persists.
if you could link me with the direct access to the power management related drivers from lenovo, ACPI and BIOS drivers I will appreciate a great deal. Also to mention, I have upgraded the BIOS Feb 2010 release, and also the Power manager driver to v3.12 (no fixes in fan speed and CPU freq scaling I am afraid.)
====================
Windows 7 Upgrade Advisor
Information about upgrading to 64-bit Windows 7
System
Details
Custom installation required
You'll need to perform a custom installation of 64-bit Windows 7 and then reinstall your programs. Make sure to back up your files before you begin.Go online to get important information about installing Windows 7 on a PC running Windows XP
Outlook Express
This program is no longer included in Windows 7. You can get similar programs for Windows 7 from other software manufacturers.Go to the Microsoft website to learn more
More info from LENOVO
LENOVO has a website that might give you more information about getting Windows 7 running on your PC.Visit the LENOVO website
Windows Aero support
Your graphics adapter supports the Windows Aero user interface.Go online to learn more about Windows Aero
CPU speed: 2.5 GHz
Your CPU meets the 1 GHz minimum requirement.
3.0 GB of RAM
Your PC meets the 2 GB minimum requirement.
81.9 GB free space available on C:
Your hard disk meets the minimum requirement of 20 GB free space for 64-bit Windows 7. Devices
Status
Details
Conexant 20561 SmartAudio HD
Conexant
Compatible
This device is compatible with Windows 7.
Intel(R) 82567LF Gigabit Network Connection
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB Universal Host Controller - 2934
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB Universal Host Controller - 2935
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB Universal Host Controller - 2936
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB Universal Host Controller - 2937
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB Universal Host Controller - 2938
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB Universal Host Controller - 2939
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) ICH9M/M-E 2 port Serial ATA Storage Controller 1 - 2928
Intel
Compatible
This device is compatible with Windows 7.
Intel(R) WiFi Link 5100 AGN
Intel Corporation
Compatible
This device is compatible with Windows 7.
Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation
Compatible
This device is compatible with Windows 7.
Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation
Compatible
This device is compatible with Windows 7.
ThinkPad Bluetooth with Enhanced Data Rate II
Broadcom
Compatible
This device is compatible with Windows 7.
=================================

Mavericks / Canon Canoscan 8800F: Hardware Buttons not working.

I've just upgraded to Mavericks. I've also updated the driver (to 13.9.2a) and installed the latest MP Navigator 1.0 (1.0.7). Is there something else I need to do?
I'm having two problems since the upgrade:
- The hardware buttons on the scanner cover have stopped working
- I'm unable to add the scanner in the System Preferences: Printers and Scanners dialog, because it's not listed as one of the available devices.
However:
- MP Navigator as well as TWAIN - compatible applications (e.g. Adobe Acrobat Pro) are working properly: they are able to see and use the 8800F (even though it's not listed as an available scanner in System Preferences)
Further explanation: The row of hardware buttons on the scanner's cover have stopped working since the upgrade to Mavericks. For example
- The "Copy" button is supposed to launch MP Navigator, scan the document on the glass and print the document.
- "Email" is supposed to scan the document, open a new message in "Mail" and insert the document as an attachment
- There are also several "PDF" buttons that are supposed to scan to a PDF document and do various things with it..
These buttons worked in previous MacOS versions, but none of them do anything since I've installed Mavericks.
Also, in the System Preferences: Printers and Scanners window: I thought I'd try deleting and re-adding the 8800F there to see if that might clear up the buttons problem. I deleted it, but am unable to add it back because it is not listed as one of the available devices. So then I checked the "System Report" under "About this Mac," and found that Canoscan is listed there as one of the USB devices.

Responding to my own post: I've learned that the problem is in the ICA driver for this device, and we're waiting for an update to that to resolve this problem.
For details, please see https://discussions.apple.com/message/23758000#23758000

9 slice scaling - not working as described

In order to create a 9 slice scaled object, I have tried
Flash help and various tutorials on the web and none of them
produce the result they say they will. All of the instructions say
basically this:
Create a movie clip symbol
Enable 9 slice scaling in its properties
Open the symbol in symbol editing mode
Move the guides where you want them to define the
non-scaleable regions
Place an instance of the symbol on the stage
At this point, I am supposed to be able to scale the object
with the guides taking effect. I have NOT once been able to do
this, the whole thing always scales and distorts the corners in the
way the guides are supposed to prevent! One tutorial told me that I
had to preview the movie and then I could see the result, but that
was not true either. Is there a step missing? Flash is constantly
one of the apps where I find tutorials and help often don't produce
the advertised result.

Don't know what to tell you. I've never done 9-slice and I
just looked it up in the help files and it worked both on the stage
and on publish.
Do you have Control -> Enable Live Preview checked?
That is what is needed to see it on stage.
Are you trying to scale imported bitmap images? They won't
9-scale.
Does your clip have nested clips inside it? They won't
9-scale.
Can't think of anything else.
Oddly enough I almost always find the help produces exactly
the advertised results.

LMS 4.0 and EoS/EoL Hardware report not working..

Hi guys,
our LMS server has proxy access to the internet but running a EoS/EoL hardware report results in:-
No data available in the report. The problem could be any one of the following:
1. No EoS/EoL hardware data available in the LMS database for the selected device(s).
2. PSIRT/EOX system job might not have run, or might have failed.
3. You might have entered the wrong cisco.com credentials.
I tried doing it manually by downloading the psirt_eox_offline.txt to the relevant directory and changing the EoS/ EoL configuration to 'local server' on our LMS server but I still get the above message.
I know for a fact we are running devices that have recently been announced by cisco as going EoL and or EoS eg 3750 switches and 2800 series routers so I was expecting to see something in the report.
How can I get this working successfully?
Thanks in advance
Trevor

Problem is now fixed.
I disabled 'use proxy server' and its now working.

Scaling not working

Hi - I am new to Azure and struggling with some of the features and hoping someone can help.
I am using websites. I have 2 sites that use the majority of resources - one ASP.Net and one MVC. My visitor pattern is low and lumpy: in the last 10 days between 50 people on my "game" site (MVC) spending an average of around an hour
and fewer than 100 on the other site. So traffic is not high.
I have my websites set up to scale up if memory > 75% and to scale down if <63 % with 10 minute interval checks and cool down periods.
The scale up limits have not been exceeded yet there are now 2 servers active. The chart of use for the last 10 days shows that only once has there been less than 48 hours charged per day, so the scale down rules are not being implemented. In the new
portal the chart showing instances indicates a single instance but the numerical panel says 2 instances...
This all looks wrong - can anyone help explain what I might be getting wrong?....
Christina

Thanks - I have just written to "Billing" on this - they declined to comment initially as it seemed to be a tech issue but ...
"actually on reflection this IS a billing issue because I think I have been over - charged for services, although you may need to get a tech
person to check my account.
I had scaling set up on my WebApps with a single metric: memory. The UP rule was at 75%, the DOWN rule at 63%. The smaller chart shows that between 10th and 12th April the scaling metric should have resulted in a reduction of instances. However I have
been charged for two instances for that period, and the average for this month has been 43.5 hours per day. From my usage stats the instances increase to 2 on 3rd April and apart from a small dip on 8th April has remained at 2 instances, 48 hours/day and I
do not believe that my settings justified this for the period in question.
I would be grateful if you would get this checked."
As I said earlier I am new (well now 5 months in) to Azure. I have a small business and am still trying to get confident in the system as its rather different from where I was before. Overall costs are similar when a single instance is in place. I'm
quite happy to pay for extra when required have not been confident about scaling working correctly. ... anyway updates have clearly been applied to this area of the new portal so time will tell :-)
Thanks for your responses.

Why is hardware acceleration not working?

Hi. I own an ASUS N61JV-X2 notebook PC. I am using Mozilla Firefox 4.0.1 for Microsoft Windows 7 Ultimate 64 bit. My laptop comes with two graphics cards: an Intel HD GPU and a nVIDIA GeForce GT 325M with 1 GB DDR3 VRAM GPU. It also comes with nVIDIA Optimus technology. I configured my nVIDIA Control Panel to make Mozilla Firefox utilize my nVIDIA GeForce GT 325M GPU when I launch the web browser.
Currently, it is not utilizing my nVIDIA GeForce GT 325M GPU. When I type in about:support, it lists my Intel HD Graphics as the GPU being used with both Direct2D Enabled and DirectWrited Enabled set to true and GPU Accelerated Windows showing 1/1 Direct3D 10.
This is not correct. It used to show my nVIDIA GeForce GT 325M GPU with 1 GB of VRAM.
I left a thread on the nVIDIA support forums, but no one has replied yet so I thought to contact Mozilla regarding this problem.
How do I enable Mozilla Firefox to use hardware acceleration so that it utilizes my nVIDIA GeForce GT 325M GPU again?
For the record, I did turn on use hardware acceleration when available under the Advanced tab within my Mozilla Firefox configuration settings.

I am having the same issue as wellwu with FF 4.0.1.
My computer is a Dell / Alienware MX11R3 with Nvidia GeForce GT 540m and Intel HD 3000 display adapters.
The issue does not occur with the Google Chrome browser. On Chrome the Nvidia drivers load automatically. WebGL works fine.
I am not sure how to find out if the Nvidia adapter is working on IE 9.
Anybody have any thoughts on this issue?

Hardware scaling not working

Similar Messages

Maybe you are looking for