Hardware scan failed with result code WWF00F008-WJDZ3F
This kept erroring so when I ran this test I had ;
Disabled Wired LAN
Turned on Wireless
Confirmed that I can access Internet
Turned off Firewall
Product : W520 4282CTO
Bios : 8BET62WW (1.42)
All drivers are latest and windows up to date.
I am using Windows 8.1
Please help to get rid of this error. This has been occuring for a few months now.
thanks.
Solved!
Go to Solution.
Link to picture
Hi, i ran the test again with suggestion but same result.
I have also tried following
ipconfig /flushdns and test
clean out all entries from hosts except 127.0.0.1 localhost
turn off firewall
while writing i ran the test with all other adapters turned off including internal network adapters created by vmware workstation 10.
and result was SUCCESS.
so this was caused by vmware network adapters. however interesting thing is i have been using vmware workstation for a long time and didnt have this issue before. i did update vmware workstation to 10.0.2 build-1744117 some time ago and this could have modified the network setting to diagnostic's dislike.
Hope lenovo updates the test to give more acurate result.
thanks all for your help.
Moderator note; picture(s) converted to link(s) About Posting Pictures In The Forums
Similar Messages
-
I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li -
Install failed with exit code 11?
Hi,
I am trying to deploy a language pack and set the override language to English-US which I have created 2 programs for in my package. When the first program runs I am getting an error in the execmgr.log that "Install failed with exit code 11" Any
ideas what this means? When I run this command manually on the machine it works fine:
"C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab"
I checked the dism.log as well but I don't see any errors. Both logs are below, any help or suggestions would be greatly appreciated TIA
<![LOG[Command line = "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab", Working Directory = C:\WINDOWS\ccmcache\4j\]LOG]!><time="08:00:28.447+300" date="01-27-2015" component="execmgr"
context="" type="1" thread="4976" file="scriptexecution.cpp:352">
<![LOG[Running "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab" with 32bitLauncher]LOG]!><time="08:00:28.447+300" date="01-27-2015" component="execmgr" context=""
type="1" thread="4976" file="scriptexecution.cpp:370">
<![LOG[Created Process for the passed command line]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="scriptexecution.cpp:513">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "LIA20115";
ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
CommandLine = "\"C:\\WINDOWS\\System32\\Dism.exe\" /online /add-package /packagepath:\"en-us\\lp.cab\"";
DateTime = "20150127130028.509000+000";
MachineName = "";
PackageName = "";
ProcessID = 2012;
ProgramName = "Install";
SiteCode = "";
ThreadID = 4976;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\WINDOWS\\ccmcache\\4j\\";
]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:715">
<![LOG[Raised Program Started Event for Ad:LIA20115, Package:LIA002A0, Program: Install]LOG]!><time="08:00:28.509+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4976"
file="executioncontext.cpp:459">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.509+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:405">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.509+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="4976" file="event.cpp:405">
<![LOG[MTC task with id {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}, changed state from 4 to 5]LOG]!><time="08:00:28.525+300" date="01-27-2015" component="execmgr" context="" type="1" thread="5904"
file="execreqmgr.cpp:6288">
<![LOG[Program exit code 11]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="scriptexecution.cpp:676">
<![LOG[Looking for MIF file to get program status]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="executionstatus.cpp:282">
<![LOG[Script for Package:LIA002A0, Program: Install failed with exit code 11]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="3" thread="2488" file="executionstatus.cpp:252">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramErrorEvent
AdvertisementId = "LIA20115";
ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
DateTime = "20150127130028.650000+000";
ExitCode = "11";
MachineName = "";
PackageName = "LIA002A0";
ProcessID = 2012;
ProgramName = "Install";
SiteCode = "";
ThreadID = 2488;
UserContext = "NT AUTHORITY\\SYSTEM";
]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488" file="event.cpp:715">
<![LOG[Raised Program Error Event for Ad:LIA20115, Package:LIA002A0, Program: Install]LOG]!><time="08:00:28.650+300" date="01-27-2015" component="execmgr" context="" type="1" thread="2488"
file="executioncontext.cpp:572">
<![LOG[Execution is complete for program Install. The exit code is 11, the execution status is FailureNonRetry]LOG]!><time="08:00:28.665+300" date="01-27-2015" component="execmgr" context="" type="1"
thread="1956" file="execreqmgr.cpp:4165">
<![LOG[Requesting MTC to delete task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}]LOG]!><time="08:00:28.681+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
file="executionrequest.cpp:9041">
<![LOG[MTC task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D} deleted successfully.]LOG]!><time="08:00:28.681+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
file="executionrequest.cpp:9070">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 10l, value Result:FALSE, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.697+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="event.cpp:405">
<![LOG[Deleting request for program Install. Failing parent program InstallEN]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="execreqmgr.cpp:8147">
<![LOG[Requesting MTC to delete task with id: ]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9041">
<![LOG[This execution request does not have a corresponding task in MTC.]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9059">
<![LOG[Requesting MTC to delete task with id: {B7EEE891-740D-4762-8D2B-BA2D7E351F1D}]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956"
file="executionrequest.cpp:9041">
<![LOG[This execution request does not have a corresponding task in MTC.]LOG]!><time="08:00:28.697+300" date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="executionrequest.cpp:9059">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="Install", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:00:28.697+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="1956" file="event.cpp:405">
015-01-27 08:00:28, Info DISM DISM.EXE:
2015-01-27 08:00:28, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2015-01-27 08:00:28, Info DISM DISM.EXE:
2015-01-27 08:00:28, Info DISM DISM.EXE: Host machine information: OS Version=6.3.9600, Running architecture=x86, Number of processors=4
2015-01-27 08:00:28, Info DISM DISM.EXE: Dism.exe version: 6.3.9600.16384
2015-01-27 08:00:28, Info DISM DISM.EXE: Executing command line: "C:\WINDOWS\System32\Dism.exe" /online /add-package /packagepath:"en-us\lp.cab"
2015-01-27 08:00:28, Info DISM DISM Provider Store: PID=5984 TID=4336 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2015-01-27 08:00:28, Info DISM DISM Provider Store: PID=5984 TID=4336 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2015-01-27 08:00:28, Info DISM DISM Provider Store: PID=5984 TID=4336 Loading Provider from location C:\WINDOWS\System32\Dism\FolderProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-01-27 08:00:28, Info DISM DISM Provider Store: PID=5984 TID=4336 Connecting to the provider located at C:\WINDOWS\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-01-27 08:00:28, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2015-01-27 08:00:28, Info DISM DISM.EXE:
2015-01-27 08:00:28, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
2015-01-27 08:00:28, Info DISM DISM.EXE:Thanks, it seems as though it is not doing anything now. I just see that the policy has arrived in the log below but it is not installing it? The dism.log hasn't changed at all so it seems that it isn't even executing the command now? Am I missing something
else? I even tried re-advertising it though client center.
Command is now:
C:\WINDOWS\sysnative\Dism.exe /online /add-package /packagepath:"en-us\lp.cab"
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 45l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="08:52:28.943+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="5036" file="event.cpp:405">
<![LOG[Policy arrived for child program Install]LOG]!><time="09:12:48.440+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="execreqmgr.cpp:6867">
<![LOG[Policy arrived for parent package LIA002A0 program InstallEN]LOG]!><time="09:12:48.487+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="execreqmgr.cpp:6893">
<![LOG[Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="LIA002A0",ProgramID="InstallEN", actionType 6l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l]LOG]!><time="09:12:48.487+300"
date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="event.cpp:405">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "LIA20116";
ClientID = "GUID:428D91E4-84BD-4740-97D9-9177C39FA3F0";
DateTime = "20150127141248.502000+000";
MachineName = "";
ProcessID = 2012;
SiteCode = "";
ThreadID = 3528;
]LOG]!><time="09:12:48.502+300" date="01-27-2015" component="execmgr" context="" type="1" thread="3528" file="event.cpp:715">
<![LOG[The user has logged off.]LOG]!><time="09:36:59.174+300" date="01-27-2015" component="execmgr" context="" type="1" thread="4320" file="execreqmgr.cpp:5138"> -
every time i download lightroom 5 it fail and says the cause is this (errror: third party payload installer Adobe_Lightroom.msi failed with exit code: 1603..
you should dl lr 5.7 and then check that your download is complete. if the same error message results when you try to install, start here - Error 1603: A fatal error occurred during installation
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
F *** ERROR = Node 'bootstrap' failed with exit code 503.
Hi,
i installed the sap nw 7.2 trial version succesfully and due to sapgui problem i downloaded a new sapgui 720 patches from the service place and installed and when installation ,i installed jre for the sapgui. after that when i start the sap server the jstart.exe is not started it is stopped. and showing the errror message
F *** ERROR => Node 'bootstrap' failed with exit code 503.
dev_jstart
trc file: "dev_jstart.3508", trc level: 1, release: "720"
trc file: "dev_jstart.new", trc level: 1, release: "720"
sysno 00
sid CE1
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 22
intno 20020600
make multithreaded, Unicode, optimized
profile D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
pid 3508
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
Sat May 22 10:55:11 2010
trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
arg[ 1] : pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F
F Sat May 22 10:55:11 2010
F ********************************************************************************
F Java environment properties (D:\usr\sap\CE1\J00\work\jstart.jvm)
F root directory : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007/sapjvm_6
F vendor : SAP AG
F version : 1.6.0_07
F cpu : x86
F java vm type : server
F java vm version : 6.1.007
F jvm library name : jvm.dll
F library path : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin
F executable path : D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin
F ********************************************************************************
F SAP extensions : available
F ********************************************************************************
I [Thr 3512] MtxInit: 30002 0 2
trc file: "dev_jstart", trc level: 1, release: "720"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
F [Thr 3512] *** LOG => connected to Enqueue Server.
F [Thr 3512] *** LOG => connected to Message Server.
F [Thr 3512] *** LOG => Starting run level 1.
F ********************************************************************************
F Java process [deployment] properties:
F section name : deployment
F config file : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Deploy_offline
F home directory : D:\usr\sap\CE1\J00\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 3512] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Starting nodes: runlevel 1.
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=deployment
F arg[ 5] = -file=D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jvmFile=D:\usr\sap\CE1\J00\work\jstart.jvm
F arg[ 7] = -traceFile=D:\usr\sap\CE1\J00\work\dev_deployment
F arg[ 8] = -javaOutFile=D:\usr\sap\CE1\J00\work\jvm_deployment.out
F env : JStart/ReserveSize=0x60000000
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;D:\usr\sap\CE1\J00\j2ee\os_libs;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_deployment.out
F stderr : D:\usr\sap\CE1\J00\work\std_deployment.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Deploy_offline started with pid 3648
F ********************************************************************************
F [Thr 3512] *** LOG => Process deployment started (pid 3648).
F
F [Thr 3512] Sat May 22 10:55:14 2010
F [Thr 3512] *** LOG => Process deployment stopping (pid 3648).
F
F [Thr 3656] Sat May 22 10:55:14 2010
F [Thr 3656] *** LOG => Signal 13 SIGCHLD.
F [Thr 3512] *** LOG => Process deployment stopped (pid 3648).
F [Thr 3512] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Run level 1 completed.
F [Thr 3512] *** LOG => Starting run level 2.
F
F Sat May 22 10:55:15 2010
F ********************************************************************************
F Java process [bootstrap] properties:
F section name : bootstrap
F config file : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Instance_bootstrap
F home directory : D:\usr\sap\CE1\J00\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 3512] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Starting nodes: runlevel 2.
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=D:\usr\sap\CE1\SYS\profile\CE1_J00_boedge
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=bootstrap
F arg[ 5] = -file=D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jvmFile=D:\usr\sap\CE1\J00\work\jstart.jvm
F arg[ 7] = -traceFile=D:\usr\sap\CE1\J00\work\dev_bootstrap
F arg[ 8] = -javaOutFile=D:\usr\sap\CE1\J00\work\jvm_bootstrap.out
F env : JStart/ReserveSize=0x60000000
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;D:\usr\sap\CE1\J00\j2ee\os_libs;D:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_bootstrap.out
F stderr : D:\usr\sap\CE1\J00\work\std_bootstrap.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Instance_bootstrap started with pid 3736
F ********************************************************************************
F [Thr 3512] *** LOG => Process bootstrap started (pid 3736).
F
F [Thr 3512] Sat May 22 10:55:20 2010
F [Thr 3512] *** LOG => Process bootstrap stopping (pid 3736).
F
F [Thr 3744] Sat May 22 10:55:21 2010
F [Thr 3744] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 3512] Sat May 22 10:55:21 2010
F [Thr 3512] *** LOG => Process bootstrap stopped (pid 3736).
F [Thr 3512] *** WARNING => Node bootstrap failed: result 1, exit code 503. [sfxxnode.hpp 1011]
F ********************************************************************************
F Native process [snapshot] properties:
F section name : snapshot
F config file : D:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : snapshot
F home directory : D:\usr\sap\CE1\J00\work
F shutdown timeout : 122000 ms
F sf support : false
F ********************************************************************************
F ********************************************************************************
F Starting process: D:\usr\sap\CE1\SYS\exe\uc\NTI386\sapcontrol.EXE
F arg[ 1] = -prot
F arg[ 2] = PIPE
F arg[ 3] = -nr
F arg[ 4] = 00
F arg[ 5] = -function
F arg[ 6] = CreateSnapshot
F arg[ 7] = Servercrash
F arg[ 8] = postmortem?node=bootstrap&exitcode=503
F arg[ 9] = 1
F arg[10] = 10000
F arg[11] = ""
F arg[12] = ""
F arg[13] = DEFAULT
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F libPath : PATH=D:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem
F stdout : D:\usr\sap\CE1\J00\work\std_snapshot.out
F stderr : D:\usr\sap\CE1\J00\work\std_snapshot.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process snapshot started with pid 3884
F ********************************************************************************
F [Thr 3512] *** LOG => Process snapshot started (pid 3884).
F [Thr 3512] *** LOG => Process snapshot running (pid 3884).
F [Thr 3512] *** LOG => SAP Start Service (pid 1240) connected.
F [Thr 3512] *** LOG => SAP Start Service (pid 1240) disconnected.
F
F [Thr 3892] Sat May 22 10:55:29 2010
F [Thr 3892] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 3512] Sat May 22 10:55:29 2010
F [Thr 3512] *** LOG => Process snapshot stopped (pid 3884).
F [Thr 3512] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 3512] *** LOG => Run level 2 completed.
F [Thr 3512] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).
I [Thr 3512] MPI: dynamic quotas disabled.
I [Thr 3512] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
F
F ********************************************************************************
F *** ERROR => Node 'bootstrap' failed with exit code 503.
F ***
F *** Please see section 'Failures in the 'synchronizing binaries' phase'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
F
F [Thr 3512] *** LOG => exiting (exitcode 22002, retcode 1).<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[2.0.7.1006]/>
<!NAME[C:\Documents and Settings\Administrator\.sdtgui\log\SDTServer.log]/>
<!PATTERN[SDTServer.log]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%d [%6s]: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
May 23, 2015 10:45:07 AM [Info ]: *************************************************
May 23, 2015 10:45:07 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:45:07 AM [Info ]: StorageService switched off.
May 23, 2015 10:45:07 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:45:07 AM [Info ]: Key Store management switched off.
May 23, 2015 10:45:08 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:45:08 AM [Info ]: WebstartService switched off.
May 23, 2015 10:45:08 AM [Info ]: RoleService switched off.
May 23, 2015 10:45:08 AM [Info ]: AlertService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting NotesService ...
May 23, 2015 10:45:08 AM [Info ]: ProcessService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting MIDService ...
May 23, 2015 10:45:08 AM [Info ]: Starting FileService ...
May 23, 2015 10:45:08 AM [Info ]: LogService switched off.
May 23, 2015 10:45:08 AM [Info ]: MailService switched off.
May 23, 2015 10:45:08 AM [Info ]: Starting services ...
May 23, 2015 10:45:08 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:45:08 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:45:08 AM [Info ]: Services started.
May 23, 2015 10:45:08 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:45:08 AM [Info ]: HTTP server started.
May 23, 2015 10:45:08 AM [Info ]: SL Controller started.
May 23, 2015 10:45:08 AM [Info ]: Starting GUI ...
May 23, 2015 10:45:11 AM [Info ]: GUI started.
May 23, 2015 10:46:53 AM [Info ]: *************************************************
May 23, 2015 10:46:53 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:46:53 AM [Info ]: StorageService switched off.
May 23, 2015 10:46:53 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:46:53 AM [Info ]: Key Store management switched off.
May 23, 2015 10:46:53 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:46:53 AM [Info ]: WebstartService switched off.
May 23, 2015 10:46:53 AM [Info ]: RoleService switched off.
May 23, 2015 10:46:53 AM [Info ]: AlertService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting NotesService ...
May 23, 2015 10:46:53 AM [Info ]: ProcessService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting MIDService ...
May 23, 2015 10:46:53 AM [Info ]: Starting FileService ...
May 23, 2015 10:46:53 AM [Info ]: LogService switched off.
May 23, 2015 10:46:53 AM [Info ]: MailService switched off.
May 23, 2015 10:46:53 AM [Info ]: Starting services ...
May 23, 2015 10:46:53 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:46:53 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:46:53 AM [Info ]: Services started.
May 23, 2015 10:46:53 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:46:53 AM [Info ]: HTTP server started.
May 23, 2015 10:46:53 AM [Info ]: SL Controller started.
May 23, 2015 10:46:53 AM [Info ]: Starting GUI ...
May 23, 2015 10:46:56 AM [Info ]: GUI started.
May 23, 2015 10:47:19 AM [Info ]: *************************************************
May 23, 2015 10:47:19 AM [Info ]: Starting SL Controller ...
May 23, 2015 10:47:19 AM [Info ]: StorageService switched off.
May 23, 2015 10:47:19 AM [Info ]: Initializing SecurityManager ...
May 23, 2015 10:47:19 AM [Info ]: Key Store management switched off.
May 23, 2015 10:47:20 AM [Info ]: Configuring HTTPManager ...
May 23, 2015 10:47:20 AM [Info ]: WebstartService switched off.
May 23, 2015 10:47:20 AM [Info ]: RoleService switched off.
May 23, 2015 10:47:20 AM [Info ]: AlertService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting NotesService ...
May 23, 2015 10:47:20 AM [Info ]: ProcessService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting MIDService ...
May 23, 2015 10:47:20 AM [Info ]: Starting FileService ...
May 23, 2015 10:47:20 AM [Info ]: LogService switched off.
May 23, 2015 10:47:20 AM [Info ]: MailService switched off.
May 23, 2015 10:47:20 AM [Info ]: Starting services ...
May 23, 2015 10:47:20 AM [Info ]: Starting service "SAPinstService" ...
May 23, 2015 10:47:20 AM [Info ]: Service "SAPinstService" started
May 23, 2015 10:47:20 AM [Info ]: Services started.
May 23, 2015 10:47:20 AM [Info ]: Starting HTTP server listening on port 4239 ...
May 23, 2015 10:47:20 AM [Info ]: HTTP server started.
May 23, 2015 10:47:20 AM [Info ]: SL Controller started.
May 23, 2015 10:47:20 AM [Info ]: Starting GUI ...
May 23, 2015 10:47:23 AM [Info ]: GUI started.
May 23, 2015 11:27:57 AM [Info ]: Stopping services ...
May 23, 2015 11:27:57 AM [Info ]: Stopping service "SAPinstService" ...
May 23, 2015 11:27:57 AM [Info ]: Service "SAPinstService" stopped.
May 23, 2015 11:27:57 AM [Info ]: Services stopped.
May 23, 2015 11:27:57 AM [Info ]: Server shutdown by SAPinstService -
JStart.exe not started on CE7.2- Node 'bootstrap' failed with exit code 503
Hi,
I installed on SAP Composition Environment 7.2 on Windows7 32bit .
So, once i start the CE1 server from sapmmc the jstart.exe status is 'stopped'. How can i solve this issue that make me can
Thanks for any comments.
sysno 00
sid CE1
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 22
intno 20020600
make multithreaded, Unicode, optimized
profile C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
pid 3492
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
Sun Jun 19 15:14:34 2011
trace logging activated, max size = 52428800 bytes, 2 versions
arguments :
arg[ 0] : C:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
arg[ 1] : pf=C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
F
F Sun Jun 19 15:14:35 2011
F ********************************************************************************
F Java environment properties (C:\usr\sap\CE1\J00\work\jstart.jvm)
F root directory : C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007/sapjvm_6
F vendor : SAP AG
F version : 1.6.0_07
F cpu : x86
F java vm type : server
F java vm version : 6.1.007
F jvm library name : jvm.dll
F library path : C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin
F executable path : C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin
F ********************************************************************************
F SAP extensions : available
F ********************************************************************************
I [Thr 996] MtxInit: 30002 0 2
trc file: "dev_jstart", trc level: 1, release: "720"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS All, egi
F [Thr 996] *** LOG => connected to Enqueue Server.
F
F [Thr 996] Sun Jun 19 15:14:48 2011
F [Thr 996] *** LOG => connected to Message Server.
F [Thr 996] *** LOG => Starting run level 1.
F ********************************************************************************
F Java process [deployment] properties:
F section name : deployment
F config file : C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Deploy_offline
F home directory : C:\usr\sap\CE1\J00\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 996] *** LOG => Instance state is "Deploying offline components" (STARTING @ 0, INACTIVE).
F [Thr 996] *** LOG => Starting nodes: runlevel 1.
F ********************************************************************************
F Starting process: C:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=deployment
F arg[ 5] = -file=C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\CE1\J00\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\CE1\J00\work\dev_deployment
F arg[ 8] = -javaOutFile=C:\usr\sap\CE1\J00\work\jvm_deployment.out
F env : JStart/ReserveSize=0x60000000
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F libPath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;C:\usr\sap\CE1\J00\j2ee\os_libs;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F stdout : C:\usr\sap\CE1\J00\work\std_deployment.out
F stderr : C:\usr\sap\CE1\J00\work\std_deployment.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Deploy_offline started with pid 3768
F ********************************************************************************
F [Thr 996] *** LOG => Process deployment started (pid 3768).
F
F [Thr 996] Sun Jun 19 15:14:56 2011
F [Thr 996] *** LOG => Process deployment stopping (pid 3768).
F
F [Thr 5952] Sun Jun 19 15:14:56 2011
F [Thr 5952] *** LOG => Signal 13 SIGCHLD.
F [Thr 996] *** LOG => Process deployment stopped (pid 3768).
F [Thr 996] *** LOG => Instance state is "Deploying offline components" (STOPPING @ 0, INACTIVE).
F [Thr 996] *** LOG => Run level 1 completed.
F [Thr 996] *** LOG => Starting run level 2.
F ********************************************************************************
F Java process [bootstrap] properties:
F section name : bootstrap
F config file : C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : Instance_bootstrap
F home directory : C:\usr\sap\CE1\J00\j2ee\cluster
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F [Thr 996] *** LOG => Instance state is "Synchronizing binaries" (STARTING @ 0, INACTIVE).
F [Thr 996] *** LOG => Starting nodes: runlevel 2.
F ********************************************************************************
F Starting process: C:\usr\sap\CE1\SYS\exe\uc\NTI386\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=bootstrap
F arg[ 5] = -file=C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F arg[ 6] = -jvmFile=C:\usr\sap\CE1\J00\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\CE1\J00\work\dev_bootstrap
F arg[ 8] = -javaOutFile=C:\usr\sap\CE1\J00\work\jvm_bootstrap.out
F env : JStart/ReserveSize=0x60000000
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F libPath : PATH=C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin\server;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\jre\bin;C:\usr\sap\CE1\J00\j2ee\os_libs;C:\usr\sap\CE1\SYS\exe\jvm\NTI386\sapjvm_6.1.007\sapjvm_6\bin;C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F stdout : C:\usr\sap\CE1\J00\work\std_bootstrap.out
F stderr : C:\usr\sap\CE1\J00\work\std_bootstrap.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process Instance_bootstrap started with pid 3776
F ********************************************************************************
F [Thr 996] *** LOG => Process bootstrap started (pid 3776).
F
F [Thr 996] Sun Jun 19 15:15:03 2011
F [Thr 996] *** LOG => Process bootstrap stopping (pid 3776).
F
F [Thr 5316] Sun Jun 19 15:15:03 2011
F [Thr 5316] *** LOG => Signal 13 SIGCHLD.
F [Thr 996] *** LOG => Process bootstrap stopped (pid 3776).
F [Thr 996] *** WARNING => Node bootstrap failed: result 1, exit code 503. [sfxxnode.hpp 1011]
F ********************************************************************************
F Native process [snapshot] properties:
F section name : snapshot
F config file : C:\usr\sap\CE1\SYS\exe\uc\NTI386\startup.properties
F node name : snapshot
F home directory : C:\usr\sap\CE1\J00\work
F shutdown timeout : 122000 ms
F sf support : false
F ********************************************************************************
F ********************************************************************************
F Starting process: C:\usr\sap\CE1\SYS\exe\uc\NTI386\sapcontrol.EXE
F arg[ 1] = -prot
F arg[ 2] = PIPE
F arg[ 3] = -nr
F arg[ 4] = 00
F arg[ 5] = -function
F arg[ 6] = CreateSnapshot
F arg[ 7] = Servercrash
F arg[ 8] = postmortem?node=bootstrap&exitcode=503
F arg[ 9] = 1
F arg[10] = 10000
F arg[11] = ""
F arg[12] = ""
F arg[13] = DEFAULT
F env : NODNSSAPTRANSHOST=1
F exePath : PATH=C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F libPath : PATH=C:\usr\sap\CE1\SYS\exe\uc\NTI386;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files\PC Connectivity Solution;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Windows Live\Shared;C:\Program Files\QuickTime\QTSystem
F stdout : C:\usr\sap\CE1\J00\work\std_snapshot.out
F stderr : C:\usr\sap\CE1\J00\work\std_snapshot.out
F console : no
F debugger: no
F nice : yes
F ********************************************************************************
F Process snapshot started with pid 3772
F ********************************************************************************
F [Thr 996] *** LOG => Process snapshot started (pid 3772).
F [Thr 996] *** LOG => Process snapshot running (pid 3772).
F
F [Thr 996] Sun Jun 19 15:15:05 2011
F [Thr 996] *** LOG => SAP Start Service (pid 2304) connected.
F [Thr 996] *** LOG => SAP Start Service (pid 2304) disconnected.
F
F [Thr 4340] Sun Jun 19 15:15:13 2011
F [Thr 4340] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 996] Sun Jun 19 15:15:13 2011
F [Thr 996] *** LOG => Process snapshot stopped (pid 3772).
F [Thr 996] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 996] *** LOG => Run level 2 completed.
F [Thr 996] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).
I [Thr 996] MPI: dynamic quotas disabled.
I [Thr 996] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
F
F ********************************************************************************
F *** ERROR => Node 'bootstrap' failed with exit code 503.
F ***
F *** Please see section 'Failures in the 'synchronizing binaries' phase'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
F
F [Thr 996] *** LOG => exiting (exitcode 22002, retcode 1).
Edited by: Thongie on Jun 19, 2011 10:21 AM
Edited by: Thongie on Jun 19, 2011 10:26 AMThe lastes log
sysno 00
sid CE1
systemid 560 (PC with Windows NT)
relno 7200
patchlevel 0
patchno 22
intno 20020600
make multithreaded, Unicode, optimized
profile C:\usr\sap\CE1\SYS\profile\CE1_J00_LN5362-288
pid 3492
F ********************************************************************************
F Process snapshot started with pid 3772
F ********************************************************************************
F [Thr 996] *** LOG => Process snapshot started (pid 3772).
F [Thr 996] *** LOG => Process snapshot running (pid 3772).
F
F [Thr 996] Sun Jun 19 15:15:05 2011
F [Thr 996] *** LOG => SAP Start Service (pid 2304) connected.
F [Thr 996] *** LOG => SAP Start Service (pid 2304) disconnected.
F
F [Thr 4340] Sun Jun 19 15:15:13 2011
F [Thr 4340] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 996] Sun Jun 19 15:15:13 2011
F [Thr 996] *** LOG => Process snapshot stopped (pid 3772).
F [Thr 996] *** LOG => Instance state is "Synchronizing binaries" (STOPPING @ 0, INACTIVE).
F [Thr 996] *** LOG => Run level 2 completed.
F [Thr 996] *** LOG => Instance state is "Some processes failed" (STOPPED @ 0, INACTIVE).
I [Thr 996] MPI: dynamic quotas disabled.
I [Thr 996] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
F
F ********************************************************************************
F *** ERROR => Node 'bootstrap' failed with exit code 503.
F ***
F *** Please see section 'Failures in the 'synchronizing binaries' phase'
F *** in SAP Note 1316652 for additional information and trouble shooting advice.
F ********************************************************************************
F
F [Thr 996] *** LOG => exiting (exitcode 22002, retcode 1).
Edited by: Thongie on Jun 19, 2011 10:22 AM
Edited by: Thongie on Jun 19, 2011 10:30 AM -
ORA-27369: job of type EXECUTABLE failed with exit code: Incorrect function
Hello,
I am calling a windows bat file using dbms_scheduler and getting the following error. I have searched the forum and the internet and tried different switches and options. None of them solved my problem.
Oracle Version: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
OracleJobScheduler is running as a service
Error starting at line 1 in command:
execute GET_RESULTS();
Error report:
ORA-27369: job of type EXECUTABLE failed with exit code: Incorrect function.
ORA-06512: at "SYS.DBMS_ISCHED", line 185
ORA-06512: at "SYS.DBMS_SCHEDULER", line 486
ORA-06512: at "PS.GET_RESULTS", line 67
ORA-06512: at line 1
27369. 00000 - "job of type EXECUTABLE failed with exit code: %s"
*Cause: A problem was encountered while running a job of type EXECUTABLE.
The cause of the actual problem is identified by the exit code.
*Action: Correct the cause of the exit code and reschedule the job.
Here is the code for scheduler
dbms_output.put_line(os_commandline || utlPath || fileSeparator || 'get.bat >nul')
dbms_scheduler.create_job
( job_name =>'PS_GET_RESULTS'
, job_action => os_commandline || utlPath || fileSeparator || 'get.bat >nul'
, job_type =>'executable'
, enabled =>false
, auto_drop =>false
, start_date =>systimestamp
dbms_scheduler.run_job(job_name =>'PS_GET_RESULTS');The dbs_output prints a line which shows that the parameters os_commandline, utlPath and fileSeparator are set correctly.
C:\windows\system32\cmd.exe /q /c E:\UTLDir\get.bat >nulThe windows file (get.bat) is:
"C:\Program Files (x86)\WinSCP\Winscp.exe" /script=e:\utldir\get_resultsThis batch file passes a script file to the executable winscp.exe to get files from another server.
The script file (get_results) is:
option batch abort
option confirm off
open sftp://username:password@ipnumber:port -hostkey="ssh-rsa 1024 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
cd /usr/dropbox/
option transfer binary
get *.results E:\UTLDir\Results\
close
exitI tested the batch file directly and works fine and "gets" the files from the server. But, invoking from Oracle dbms_scheduler fails with ORA-27369: job of type EXECUTABLE failed with exit code: Incorrect function.
Appreciate your help and time in suggesting additional guidelines or pointers.
Thanks,
RoseHere is an update, if somebody else is having a similar problem.
The ftp command "cd" to change the directories should be an absolute path. I was given a path "/usr/dropbox/", but on the server it actually corresponds to "/usr/local/apps/dropbox/". After updating the directory path, the scheduler worked fine in invoking the batch file for transferring the files.
Thanks,
Rose -
Please help: Utility used to install the update failed with exit code {0}.
Hi,
I admit to being a relative newbie at Solaris 10 administration, so please exercise forbearance on my behalf.
I have just installed Solaris 10 11/06 on my laptop x86. Everything went fairly smoothly. I used the Installation Check Tool 1.2 to decide if my machine was adequate to run the OS and with the exception of a NIC driver, it was. I downloaded the sfe driver and configured networking and it seems to work exceptionally well. However, when I run Update Manager in JDS (the only way I know how to run it), it fails to update some of the packages. Sometimes, if I retry the same packages, sometimes it will eventually work. But it keeps failing with the following error on a consistent basis over the last several days:
Utility used to install the update failed with exit code {0}.
I hunted around on the web and the results were not promising. Is there a log somewhere that will give me the actual error or do y'all know of a quick fix.
Thanks,
WillThat is strange indeed, could you try downloading and
applying the unsigned zip to see if that works?The problem persits:
# patchadd -M /root/119116/
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
119116-22
Preparing checklist for non-global zone check...
Checking non-global zones...
Cannot open pkginfo file //var/sadm/pkg/.save.SUNWhea/pkginfo
Non-global zone check failed. No change made to the System.
Patchadd exiting. -
hi This event is logged in SharePoint 2010 logs often please help trace the issue also it precedes with Project server WCF code execution which alos is quite slow in execution, means PWA site runing slow. why does status read
provisioning while i am not running anything.
please help!!!
10/03/2011 14:39:23.46 w3wp.exe (0x306C)
0x2FC4
SharePoint Foundation Topology
e5mc Medium
WcfSendRequest: RemoteAddress: 'http://moss:32843/a667a0a96d314e5e9e6c8fe4866c5db4/PSI/PWA.svc' Channel: 'Microsoft.Office.Project.Server.Interfaces.IPWA' Action: 'http://schemas.microsoft.com/office/project/server/webservices/PWA/AdminReadSiteMapTyped'
MessageId: 'urn:uuid:0751dbdd-76c0-4410-ac73-2f1782e1513b'
91b87b3b-e9ad-43b9-9e8c-e553ba7e2f6c
10/03/2011 14:39:23.46 w3wp.exe (0x1B58)
0x1BA0
SharePoint Foundation Topology
e5mb Medium
WcfReceiveRequest: LocalAddress: 'http://moss.ccl.local:32843/a247f7273c09486999c9f111798cab59/ProfilePropertyService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://Microsoft.Office.Server.UserProfiles/GetProfileProperties'
MessageId: 'urn:uuid:772a5c58-c0e4-4b0f-9142-f634fee413a9'
3cd5bfa5-2e40-458e-9718-788887b44dbe
10/03/2011 14:39:23.46 w3wp.exe (0x1B58)
0x1BA0
SharePoint Foundation Monitoring
nasq Medium
Entering monitored scope (ExecuteWcfServerOperation)
3cd5bfa5-2e40-458e-9718-788887b44dbe
10/03/2011 14:39:23.64 w3wp.exe (0x1B58)
0x1BA0
SharePoint Foundation Monitoring
b4ly Medium
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=179.589584709789
3cd5bfa5-2e40-458e-9718-788887b44dbe
10/03/2011 14:39:23.64 w3wp.exe (0x306C)
0x3170
SharePoint Foundation Monitoring
b4ly High
Leaving Monitored Scope (ExecuteWcfOperation:http://Microsoft.Office.Server.UserProfiles/GetProfileProperties). Execution Time=205.109867315539
10/03/2011 14:39:23.64 w3wp.exe (0x306C)
0x3170
SharePoint Foundation Monitoring
b4ly High
Leaving Monitored Scope (ExecuteOnChannel:GetProfileProperties). Execution Time=206.500546857212
10/03/2011 14:39:23.74 Microsoft.Office.Project.Server (0x0DAC)
0x0FA8 Project Server
Provisioning
8zdn Medium
[SERVICE] ProjectQueueService14: Getting list of Sites for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
10/03/2011 14:39:23.74 Microsoft.Office.Project.Server (0x0DAC)
0x0FA8 Project Server
Provisioning
128v Medium
[SERVICE] ProjectQueueService14: Adding Site: ef3acaf4-3e7a-4819-80e0-8e7a85ca417b to sitelist for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
10/03/2011 14:39:23.77 Microsoft.Office.Project.Server (0x0CD4)
0x0FA4 Project Server
Provisioning
8zdn Medium
[SERVICE] ProjectEventService14: Getting list of Sites for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
10/03/2011 14:39:23.77 Microsoft.Office.Project.Server (0x0CD4)
0x0FA4 Project Server
Provisioning
128v Medium
[SERVICE] ProjectEventService14: Adding Site: ef3acaf4-3e7a-4819-80e0-8e7a85ca417b to sitelist for ServiceApp: a667a0a9-6d31-4e5e-9e6c-8fe4866c5db4
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
General
84yj Medium
Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
Sandboxed Code Service
ei0p Monitorable
- Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError) at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32
retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading perf counters for process "SPUCWorkerProcess".
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
General
84yj Medium
Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
Sandboxed Code Service
ei0p Monitorable
- Unhandled exception System.ComponentModel.Win32Exception: Unknown error (0xc0000bbc) at Microsoft.SharePoint.Win32.SPPdh.CheckReturnValue(PDH_STATUS status, Boolean throwOnError) at Microsoft.SharePoint.Utilities.SPPerformanceCounter.NextValue(Int32
retry, Int32 retryInterval) at Microsoft.SharePoint.UserCode.SPUserCodePerformanceCounterHelper..ctor(String processName, Int32 processInstanceId) thrown while reading perf counters for process "SPUCWorkerProcess".
10/03/2011 14:39:23.99 SPUCHostService.exe (0x22E0)
0x300C SharePoint Foundation
General
84yj Medium
Performance Counter OS (pdh) call failed with error code PDH_INVALID_HANDLE.Hi there,
A quick search showed the result on fourm thread:
It's related to SHarePoint foundation error & this issue occurs when the account under which SPUserCodeService is configured to run does not have the necessary permissions to access the performance counters on the server.
http://social.technet.microsoft.com/Forums/eu/sharepoint2010setup/thread/9fbcf2a3-1b1f-4fd8-a9b4-dc63ed753973
To read in support article.
http://support.microsoft.com/kb/983081Thanks, Amit Khare |EPM Consultant| Blog: http://amitkhare82.blogspot.com http://www.linkedin.com/in/amitkhare82 -
Xcode error "Command /Developer/usr/bin/gcc-4.2 failed with exit code 1 "
Hello!
This is one of my first posts on the Mac forum. I am a 13 -year-old learning to develop apps for the iPhone.
Right now I am having a really annoying error with Xcode;
I can't compile any code at all.
I tried this post in the software 101 section with no result. Sorry if a seem a bit impatient...
I am trying to use C and Objective-C command line projects....
This is the error code I get with all my projects;
Command /Developer/usr/bin/gcc-4.2 failed with exit code 1
It's not an error in the code because even if I just do a project with the code int myInt = 5;
Thanks if you can help!Can you please post your entire program, perhaps the one that simply contains int myInt = 5; ?
When a new project is created, a main.c file is created with contents:
#include <stdio.h>
int main (int argc, const char * argv[]) {
// insert code here...
printf("Hello, World!\n");
return 0;
This should build without error by using the Build->Build menu option.
Replacing the printf line with int myInt = 5; compiles and executes properly although it does very little. -
CPU12.1.0.2.3 opatchauto failed with error code 255.
I am installing critical patch update 12.1.0.2.3 (15-APR-2015) for Grid Infrastructure standalone on Linux. It fails with the subject error code and the following additional messages:,
The user is root. OPatch cannot continue if the user is root.
opatchauto failed with error code 255.
The instructions specifically tell me to login as root before installing the patch, so what's up?
The instructions say to first upgrade OPatch to the latest, which I have done and verified.
Second, an OCM Response File is mandatory, so I followed the steps to create this file and saved it as /home/grid/ocm.rsp with default permissions 644.
Third, the instructions say to download the patch and unzip it to an empty location that cannot be /tmp. I created a new directory /home/grid/foo and unzipped the software to that location. So, the unzip location is /home/grid/foo/ and in that directory are only two things: a file named PatchSearch.xml and a directory named 20485724.
Fourth, the readme says the patch must be installed by a user with root privileges, so I have logged in as root. (Oracle Note 1591616.1 says you must login as root, not just be root like).
As root I have set environment variable for ORACLE_HOME pointing to the GI Home, and I set PATH=$PATH:$ORACLE_HOME/bin:$ORACLE_HOME/OPatch.
Finally, I invoke opatchauto with the required parameters and it throws an error saying I cannot be root. I fussed with the parameters and the result is always I cannot be root.
From the documentation,
Case 3: Patching GI Home Alone
You should use the following instructions if you prefer to patch Oracle GI (Grid Infrastructure) home alone with this patch.
Case 3.1: Non-Shared GI Home
If the GI home is not shared then use the following instructions to patch the home.
Case 3.1.1: ACFS File System Is Not Configured
Follow these instructions in this section if the GI home is not shared and none of the Oracle database homes use ACFS file system for its software files.
Execute the following on each node of the cluster.
As root user execute:
# opatchauto apply <UNZIPPED_PATCH_LOCATION>/%BUGNO% -oh <GI_HOME> -ocmrf <ocm response file>
My command is,
opatchauto apply /home/grid/foo/20485724 -oh /u01/app/12.1.0.2/grid -ocmrf /home/grid/ocm.rsp
So, not a syntax problem. It simply won't let me run it as root despite that being a hard requirement.Hello,
I tried with above command and faced the a different error . I tried applying patch 4487801.
ApplySession applying interim patch '4487801' to OH <Oracle_Home>
ApplySession failed during prerequisite checks: Prerequisite check "CheckApplica
bleProduct" failed.
The details are:
OPatch found incompatible or invalid applicable product type with respect to the
Oracle Home.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code = 74
I doubt if some other patches to be applied before this one.if yes, then from where we can get the list of pre requite patches.
Please guide. -
Installation failed with error code 1603
Hi all,
while installing the configuration manager clients on a system manually, we came across this ERROR:
installation failed with error code 1603
Do anyone has any idea how can this be resolved. Several posts suggest its a problem related to client push installation method, but since I am installing the configuration manager clients manually, so I mush not be affected by anything related to Client Push Installation. However, be noted that client push installation is well configured on the server, there are certain computers where the client is not getting installed so we are installing the clients MANUALLY to those systems,
Any help and suggestions would be higly appreciated.
Regards,
NaveedI have encountered the Error 1603/1602 while installing the HCKInstall\Client\Setup.exe on several machines. It appears to be generic at first, but it's not. The error code is being passed from the Service back to the MSI. It means that a service failed
to start. The key is that it happens at the very end of the installation and then does the rollback. The solution is to figure out which service failed and then remove it and the directories.
Here is what I did.
I created batch to kick off before I install the client now. It basically checks for installed HCK products and if there uninstalls them. Then checks for the state of each service and if running stops the service before attempting to remove the HCK/WLK leftovers.
Then it removes the sticky directory.
@ECHO OFF
:: Defaults...
:: Default:_HCK_Services_="DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent" services.
SET _HCK_Services_=
:: Default:_Directories_="C:^\Program Files ^(x86^)^\Microsoft Driver Test Manager"
SET _Directories_=
:: Default:_DEBUG_=off, use debug_on to change
SET _DEBUG_=
:: Examples: Comma delimited lists param1=Services param2=directory param3=debug_on
:: ^<command.bat^> "DTMService,FtsSvc","C^:^\Program Files ^(x86^)^\Microsoft Driver Test Manager",c^:^\test, "debug_on"
::SetVars:
SET _HCK_Services_=%1
IF /I "%2" NEQ "" SET _Directories_=%2
:: SetDefaults:
IF /I "%3" GEQ "debug_on" SET _DEBUG_=True
IF NOT DEFINED _HCK_Services_ (
SET _HCK_Services_=DTMService,FtsSvc,WLKSvc,WTTNotification,WTTResultsRelayAgent
IF NOT DEFINED _Directories_ SET _Directories_=C:\Program Files (x86)\Microsoft Driver Test Manager
:: Clear Parans on directories
set _Directories_=%_Directories_:(x86)=replace_x86%
:: CallMainFunctions:
CALL:UninstallHCK
CALL:CheckVersion
CALL:Main "%_HCK_Services_%"
:Main
FOR %%A IN (%~1) DO (
REM Checking for Active Services ant attempting
IF DEFINED _DEBUG_ (
ECHO Checking %%A...
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" Status:"%%H"
IF /I "%%H" NEQ "" (
IF DEFINED _DEBUG_ (
ECHO Service "%%A" is installed but not %%H.
) ELSE IF /I "%%H" GEQ "RUNNING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
ECHO Attempting to Stop %%A
SC STOP "%%A" >NUL
) ELSE IF /I "%%H" GEQ "START_PENDING" (
IF DEFINED _DEBUG_ (
ECHO. %%A %%H
REM Need to wait for it to fail before we can stop the service.
IF DEFINED _DEBUG_ (
ECHO Attempting to Stop %%A in 60 seconds...
PING.EXE 1.1.1.1 -n 1 -w 60000 >NUL
SC STOP "%%A" >NUL
) ELSE (
CALL:print Service, "%%A", Error, "Unexpected Results"
FOR /F "tokens=3 delims=: " %%H IN ('sc query "%%A" ^| findstr "STATE"') DO (
IF /I "%%H" NEQ "STOPPED" (
CALL:print Service, %%A, Failure_To_STOP, %%H
) ELSE (
CALL:print Service, %%A, State, %%H
CALL:delete_Service %%A
FOR /F "tokens=* delims=: " %%H IN ('sc query "%%A" ^| findstr "FAILED"') DO (
IF DEFINED _DEBUG_ (
ECHO Service:"%%A" is not installed.
ECHO. State:%%H
CALL:print Service, %%A, FinalState, "Not Installed"
CALL:RemoveDirectories "%_Directories_%"
GOTO:EOF
:UninstallHCK
CALL:CheckInstallation "{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{3BEE5E5E-8BEE-F691-4349-7B2B41FF3A59} /qb+
CALL:CheckInstallation "{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{6F8333B4-7DB1-E6D3-52ED-5641F8F38B76} /qb+
CALL:CheckInstallation "{A329307E-3CCD-57BF-47EF-1B857D1AF08E}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{A329307E-3CCD-57BF-47EF-1B857D1AF08E} /qb+
CALL:CheckInstallation "{F1213F53-D794-2021-E14E-F4BEED1BBF3B}", UninstallString
IF DEFINED _REGKEYFOUND_ MsiExec.exe /X{F1213F53-D794-2021-E14E-F4BEED1BBF3B} /qb+
GOTO:EOF
:RemoveDirectories
SET _RemoveDirectories_1_=%~1
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:"=%
SET _RemoveDirectories_1_=%_RemoveDirectories_1_:'=%
FOR /f "tokens=1-8 delims=," %%A IN ("%_RemoveDirectories_1_%") DO (
IF "%%A" GEQ ":" (
CALL:RMDIR "%%A"
IF "%%B" GEQ ":" (
CALL:RMDIR "%%B"
IF "%%C" GEQ ":" (
CALL:RMDIR "%%C"
IF "%%D" GEQ ":" (
CALL:RMDIR "%%D"
IF "%%E" GEQ ":" (
CALL:RMDIR "%%F"
IF "%%G" GEQ ":" (
CALL:RMDIR "%%H"
IF "%%I" GEQ ":" (
CALL:RMDIR "%%I"
IF "%%J" GEQ ":" (
CALL:RMDIR "%%J"
exit /b 0
FOR %%A IN ('%_RemoveDirectories_1_%') DO (
ECHO.Dir=%%A
REM CALL:RMDIR '%%A'
GOTO:EOF
:RMDIR
:: GET Parans back
SET _THEDIR_=%~1
SET _DirStatus_=
set _THEDIR_=%_THEDIR_:replace_x86=(x86)%
set _THEDIR_=%_THEDIR_:"=%
set _THEDIR_=%_THEDIR_:'=%
IF NOT EXIST "%_THEDIR_%" goto endof
RMDIR "%_THEDIR_%" /S /Q
IF NOT EXIST "%_THEDIR_%" (
SET _DirStatus_=Removed
) ELSE (
SET _DirStatus_=Failed To Remove Directory
CALL:print RemoveDirectory, "%_THEDIR_%", Results, "%_DirStatus_%"
:endof
GOTO:EOF
:print
SET var_3=%~3
IF DEFINED var_3 (
ECHO ^{^[^'%~1^'^]='%~2', ^[^'%~3^'^]='%~4'^}
) ELSE (
ECHO ^{^[^'%~1^'^]='%~2'^}
GOTO:EOF
:delete_Service
sc.exe delete "%~1" >Nul
IF %ERRORLEVEL% NEQ 0 (
CALL:print Service, %~1, FinalState, "Failed To Uninstall"
) ELSE (
CALL:print Service, %~1, Current_State, Uninstalled
GOTO:EOF
:TestStr
SET _ORIGINAL_=%~2
SET STR2=%~2
SET STR3=%~3
SET STR4=%~4
REM ECHO.Str2="!STR2!"
SET STR2=!STR2:%~1=!
REM echo.STR2="!STR2!"
IF /I NOT "!STR2!" EQU "!_ORIGINAL_!" (
SET %STR3%=%STR4%
GOTO:EOF
:CheckVersion
REM Check Windows Version and sets variable for _Version_ and _OSType_
REM Enhancement will be to install dependencies required for HCK
SET _VERSION_=
SET _OSType_=
SETLOCAL ENABLEEXTENSIONS ENABLEDELAYEDEXPANSION
FOR /F "usebackq delims=" %%i IN (`VER`) DO (
SET _VERSION_=%%i
SET _VERSION_=!_VERSION_:[=!
SET _VERSION_=!_VERSION_:]=!
REM CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "5.0", "!_VERSION_!", _OSType_, Windows_2000
CALL:TestStr "5.1", "!_VERSION_!", _OSType_, Windows_XP
CALL:TestStr "5.2", "!_VERSION_!", _OSType_, Windows_2003
CALL:TestStr "6.0", "!_VERSION_!", _OSType_, Windows_Vista_2008R1
CALL:TestStr "6.1", "!_VERSION_!", _OSType_, Windows_7_2008R2
CALL:TestStr "6.2", "!_VERSION_!", _OSType_, Windows_2012
CALL:print OSType, !_OSType_!
CALL:print !_Version_!
ENDLOCAL && SET _OSType_=%_OSType_% && SET _VERSION_=%_VERSION_%
GOTO:EOF
:CheckInstallation
SET _REGKEYFOUND_=
SET KEY_NAME="HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%~1"
SET VALUE_NAME=%~2
FOR /F "usebackq skip=4 tokens=1-3" %%A IN (`REG QUERY %KEY_NAME% /v %VALUE_NAME% 2^>nul`) DO (
SET ValueName=%%A
SET ValueType=%%B
SET ValueValue=%%C
IF DEFINED ValueName (
SET _REGKEYFOUND_=True
CALL:print "REGKEY", "%~2", Name, "%ValueName%"
CALL:print "REGKEY", "%~2", Value_Type, "%ValueType%"
CALL:print "REGKEY", "%~2", Value_Value, "%ValueValue%"
) else (
CALL:print "REGKEY", "%~2", "%KEY_NAME%\%VALUE_NAME%", "not found."
GOTO:EOF
:Done -
OPatch failed with error code 74 when applying patch PSE 13723798
Hello all,
tried to apply patch (PSE 13723798) to fix the no-scrollbar bug in Webcenter Portal Admin Console. But found this error during the patching process, as described below. Any solution for this?
Running prerequisite checks. . .
Patch 13723798: Optional component (s) missing : [ oracle.webcenter.framework, 11.1.1.4.0, higher version 11.1.1.5.0 found. ]
Prerequisite check "CheckApplicable failed.
The details are:
Patch "13723798" is a no-op patch.
ApplySession failed during the prerequisite checks: Prerequisite check "CheckApplicable" failed.
System intact, OPatch will not attempt to restore the system
OPatch failed with error code 74Okay, I'll try it on VM.
Anyway, here is the result running command: opatch lsinventory
[oracle@CDJWPS01 13723798]$ opatch lsinventory
Invoking OPatch 11.1.0.8.3
Oracle Interim Patch Installer version 11.1.0.8.3
Copyright (c) 2010, Oracle Corporation. All rights reserved.
Oracle Home : /opt/app/Oracle/Middleware/Oracle_WC1
Central Inventory : /home/oracle/oraInventory
from : /etc/oraInst.loc
OPatch version : 11.1.0.8.3
OUI version : 11.1.0.9.0
OUI location : /opt/app/Oracle/Middleware/Oracle_WC1/oui
Log file location : /opt/app/Oracle/Middleware/Oracle_WC1/cfgtoollogs/opatch/opatch2013-05-31_20-43-34PM.log
Patch history file : /opt/app/Oracle/Middleware/Oracle_WC1/cfgtoollogs/opatch/opatch_history.txt
OPatch detects the Middleware Home as "/opt/app/Oracle/Middleware"
Lsinventory Output file location : /opt/app/Oracle/Middleware/Oracle_WC1/cfgtool
logs/opatch/lsinv/lsinventory2013-05-31_20-43-34PM.txt
Installed Top-level Products (1):
Oracle WebCenter Suite 11g 11.1.1.5.0
There are 1 products installed in this Oracle Home.
There are no Interim patches installed in this Oracle Home.
OPatch succeeded. -
OPatch failed with error code 22
Hi,
When trying to install Patch 17319434: WCC 11.1.1.6.0 BUNDLE (MLR 16) I get error message "OPatch failed with error code 22". Any ideas on how to solve this issue?
Thanks,
IbrahimHi Ibrahim ,
Can you please check if $ORACLE_HOME\inventory\ContentsXML\comp.xml has patch 17319434 referenced and it shows the the following tag :
<ONEOFF REF_ID="17319434" >
There check if the following is referenced : XML_INV_LOC="oneoffs/17319434/"
If yes , then navigate to $ORACLE_HOME\inventory\oneoffs and see if the directory 17319434 is present . If yes , then backup the directory (rename it) and then try applying the patch .
Check the results.
Thanks,
Srinath -
CFURLCreateDataAndPropertiesFromResource failed with error code -15
I'm trying to lead a TIFF image into a CGImageSource using CGImageSourceCreateWithURL. My URL is correct, is %20 encoded, is a path to an existing file, that file is a TIFF. However, the line:
NSString *fullPath = [[[fileNames objectAtIndex:pageNum - 1] string]
stringByAddingPercentEscapesUsingEncoding:
NSUTF8StringEncoding];
NSString* urlStr = [NSString stringWithFormat: @"file:/%@", fullPath];
NSURL * url = [NSURL URLWithString: fullPath];
CGImageSourceRef src = CGImageSourceCreateWithURL (url, NULL);
gives me the following error:
Wed Aug 4 20:17:20 Brians-mini.local DocKeep[17199] <Error>: CGImageSourceCreateWithURL: CFURLCreateDataAndPropertiesFromResource failed with error code -15.
anyone know what error -15 is? or where I can find it?
thanksHey,
Thanks for the reply. I saw the -customlogdir switch listed for opatch to put the results in another directory. My main concern is this - why would I have permission issues for this command on a fresh install of GI? And why are there no references to this error on MOS?
I have an SR filed with MOS to see why this is happening, but figured I would check with the community to see if anyone else is having similar issues.
Thanks!
Maybe you are looking for
-
What is the Way of finding all standard IDOC avilable in SAP R/3 modulewise
Dear Experts, How to know list of all avilable standard IDOCs present in SAP R/3 Modulewise(i.e. HR,MM etc)?is there any standard tcode to see all the standard IDOC(or we have to follow some other way) ? Eagerly looking for your valuable opinion. R
-
IPad Mini screen completely bare
I have the iPad Mini and my 19 month son uses it, while he plays with it sometimes the entire screen goes completely blank. I literally have to turn it off, wait a few seconds, then turn it back on. Then all his apps and the screen and pages will app
-
One of my podcasts disappears soon after download. How do I stop this?
One of the podcasts I am subcribed to now disappears soon after downloading. When I sign onto Itunes again the same download starts. How do I revent this?
-
This product has been a constant pain - works fine for some months then simply refuses to connect - I've lost count of the number of times I've repaired, removed, cleaned & reinstalled. A Winxp Pro sys, this is the only piece of software that gives p
-
How to install mavericks on mid 2009 iMac without internet access
I want to upgrade a mid 2009 iMac from Snow Leporard to Mavericks. The computer does not have internet access. How can I get an installation disk?