Hardware specification for Oracle 10g
Hello all,
I need a hardware specification for Oracle 10g. Where can I find any information about this topic?
Thanks
Wisnia
Minimal HW requirements are described in documentation.
As you question is very general (you didn't provide some parameters) then maybe this site will help you: http://www.sizinglounge.com/
Similar Messages
-
Hardware Configurations for Oracle 10g AS
Hi,
I'm looking for Hardware Configurations on various platforms which Oracle AS 10g supports. Basically i'm looking for details for these on each supported platforms.
No. Of CPUs
CPU Speed
RAM
Disk Space
I would appreciate if someone point me some document on this.
Thanks,
RKThose parameters are more of a function of intended use (ie the application and which components of AS involved). There are absolute minimum values to enable installation (not use) of the software in each platforms Install Guide.
For certified platforms, check with you sales contact or Oracle Support. -
Hardware specifications for EBS Modules
Hi,
I want to know the way how to recommend Client about the hardware specifications for Oracle EBS R12 modules implementation. Can anyone give me a link that how the specifications requirement can be gathered for good performance of Oracle EBS.
Thanks & Regards,
M.U.N.AHi,
Please see old threads as we have discussed the same topic many times in the forum before.
Hardware Sizing
http://forums.oracle.com/forums/search.jspa?threadID=&q=hardware+sizing&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Hardware Specification
http://forums.oracle.com/forums/search.jspa?threadID=&q=hardware+specification&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Benchmark
http://forums.oracle.com/forums/search.jspa?threadID=&q=Benchmark&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Requirement specification for Oracle 9i & 10g database.
I had a query as to what are the software & hardware requirements for Oracle 9i & 10g. I know of 9i for Windows only at the moment, it requires around 10MB hard disk space & 256 RAM. So, similarly, i wanted to know for other platforms. I hope, my question is clear.
Please, help in solving the doubt.
regardsi don't think that you should worry about minimum hardware specifications as now a days hardware is very cheap and also the minimum configuration new machines available in market are with p4, 256 mb ram, 80gb hdd, etc.
But still for knowledge minimum requirements information can be found in any oracle sw installation documentations. -
Is license required for Oracle 10g client on production
Is license required for Oracle 10g client on production?
Standard disclaimer: We don't represent Oracle. Your situation may be different because of specific wording in your particular Oracle contract, because of differences in licensing regimes over the years, because of laws in your particular country, etc. If you have a serious licensing question, you really need to address it to Oracle Sales. Explaining that some guy on the internet told you it was OK is going to be cold comfort if you're ever audited by Oracle and they disagree with my interpretation...
In general, no, you don't need a separate client license. The database is generally licensed to support a number of named users and/or all the users that a certain hardware configuration can support. Assuming the person using the Oracle client is connecting to a properly licensed database (and that they are one of the named users if that is the licensing regime), you shouldn't need a separate license.
There may be slightly different rules if we're talking about developers connecting to the database because of the "Oracle Programmer" set of licenses that appears on pricing sheets that I've never fully understood.
Justin -
Long-term retention backup strategy for Oracle 10g
Hello,
I need design a Archivelog, Level 0 and Level 1 long-term retention backup strategy for Oracle 10g, It must be based in Rman with tapes.
¿Somebody could tell me what it's the best option to configure long-term retention backups in Oracle?, "CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 1825 DAYS;" It's posibble ?
Regards and thanks in advanceHello;
RECOVERY WINDOW is an integer so yes its possible. Does it make sense?
Later My bad, this is Oracle 11 only ( the gavinsoorma link ) . Getting harder and harder to think about 10. Don't think I would use RECOVERY WINDOW.
I would let the tape backup system handle the retention of your rman backups.
Using crosscheck and delete expired commands you can keep the catalog current with the available backups on tape.
Oracle 10
Keeping a Long-Term Backup: Example
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmbackp.htm#i1006840
http://web.njit.edu/info/oracle/DOC/backup.102/b14191/advmaint005.htm
Oracle 11
If you want to keep 5 years worth of backups I might just use KEEP specific date using the UNTIL TIME clause :
keep until time 'sysdate+1825'More info :
RMAN KEEP FOREVER, KEEP UNTIL TIME and FORCE commands
http://gavinsoorma.com/2010/04/rman-keep-forever-keep-until-time-and-force-commands/
Best Regards
mseberg
Edited by: mseberg on Dec 4, 2012 7:20 AM -
Can't Create the ODBC connection for Oracle 10g
Hi,
I am working with Oracle 10g Database Release 2 in windows XP professional. I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
system error code 998
could not locate the setup or translator library
Please help me how can I solve this problem and create the ODBC connection for oracle 10g database.
Best Regards,mwz wrote:
I am trying to create an ODBC connection for oracle but become failure because its generating the following errors:
system error code 998
could not locate the setup or translator libraryThe symptom described is typical of an incorrect system env PATH setting (used by the data source admin tool), compared to that of the Oracle Home (specifically, path $OH/bin). The odbc driver config routine will search directories listed in PATH variable for necessary libraries (Client dll's). If some library fails to load (from e.g. oraoci*.dll or oraclient10.dll) it will probably error out, as in your case.
Are you creating the odbc dsn on the databse server host or on some other machine? I.e. are you using the db host as a client or not? -
Hardware requirement for Oracle Universal Content Management
Hi Experts,
What are the Hardware requirements for Oracle Universal Content Management ?
Regards
Nasirdoes this help?
Oracle WebLogic Server 11g (10.3.3) System Requirements
Oracle WebLogic Server supports a number of platforms including:
– Linux
– Sun Solaris
– HP-UX
– Windows 2000, 2003 Server, XP
• Processor:
– At least one 1 GHz CPU is recommended.
– Intel and UNIX processors are supported.
• Hard disk drive:
– A full installation requires approximately 2 GB of disk space.
– The Linux value for file descriptors must be 4096 or greater.
– Samples are optional (download from OTN).
• Memory:
– A minimum of 2 GB RAM is recommended for WebLogic
Server.
– Consider the number of simultaneous users and sessions.
– Consider in-memory programs, such as Coherence.
System Requirements
The following are some of the basic system requirements for Oracle WebLogic Server 10.3.3:
• The Oracle WebLogic Server installer requires a Java Runtime Environment (JRE) to run.
Oracle WebLogic Server is certified with JDK6.0. As part of the installation, it gives the option
to install the JRockit JDK 6.0 version. As part of postinstallation, prefix the bin directory of
the JDK to the PATH environment variable.
• The Oracle WebLogic Server installer requires a temporary location in which to unpack the
files. Typically, the installer requires approximately 2.5 times the amount of temporary space
that is required by the installed files.
Note: In this release of WebLogic Server, users can choose which components of WebLogic Server
they use. Specifically, this release allows users to choose whether the Enterprise JavaBeans (EJB),
Java Message Service (JMS), and J2CA services are started when WebLogic Server is started. The
benefit of excluding some services is reduced memory footprint and reduced startup time. -
Vedio / Audio web based training for Oracle 10g DBA.
Hi Everyone,
I am looking for a free web based training / Vedio / Audio for Oracle 10g DBA.
Please help me out in the same.
Thanks & Regards,
Deepak
Edited by: [email protected] on May 15, 2009 9:48 PM[email protected] wrote:
Hi Everyone,
I am looking for a free web based training / Vedio / Audio for Oracle 10g DBA.
Please help me out in the same.
Thanks & Regards,
Deepak
Edited by: [email protected] on May 15, 2009 9:48 PM
Deepak,
There is no free lunch anywhere in this world, and the same is true for the training as well of Oracle modules. If you can't get time out to attend an Instructor based training, you have two choices,
1) Self Study CD Roms Oracle offers the trainining in a self paced learning format with CD Roms which have all whatis needed to make one start and grow with the learning of a specific module. You can check which module you need and can order the cd rom for that. Learn more about this from here,
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=35
2) Live Virtual Class This is the newest standard that Oracle has introduced in the training formats. As the name suggests, this is a class which is surely taught by an instructor only but this doens't need you to come and attend a course at a specific location , for example at Oracle's education office. You can attend the prorgam while being at your home/office as well. It offers rich video/audio expereince which doesn't make you feel that you are just learning sitting in front of a computer. Learn more about it from here,
http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=233
That said, both the options mentioned above are NOT free and there is NO free event happening anywhere which goes from the start to finish of a module. There are some small web events but they can't be called a training class as there are just some topics discussed in them. So once again, don't look for free lunch, its not there anywhere.
HTH
Aman.... -
What's the latest patch for oracle 10g client?
what's the latest patch for oracle 10g client? 6810189?
The same as the patch for the Oracle database of the same version and operating system. Since you didn't specify the operating system or the particular Oracle version (10g could mean 10.1 or 10.2), it's hard to be more specific.
Justin -
Archiving Best Practices / How To Guide for Oracle 10g - need urgently
Hi,
I apologize if this is a silly question. But i need a step by step archiving guide for Oracle 10g and cannot find any reference document. I am in a rather remote part of S.E. Asia & can't seem to find DBA's with the requisite experience to do the job properly. I have had 1 database lock up this week at a big telecoms provider and another one at a major bank is about to go. I can easily add LUNS & re-structure mirrors etc at the Unix level [ i am a Unix engineer ]
but i know that is not the long run solution. I am sure the 2 databases i am concerned about have never been archived properly.
This is the sort of thing DBA's must do all the time. Can someone point me to the proper documentation so i can do a proper job and archive a few years data out of these databases. I do not want to do a hack job. At least i can clone the databases and practise on the clones first before i actually do production.
-thanks very much
-gregoire
[email protected]I'm not so sure this is a general database question, as it would be specific to an application and implementation, and as the technology has changed, the database options to support it has too.
So for example, if you have bought the partitioning option, there may be some sensible procedure for partitioning off older data.
Things may depend on whether you are talking about an OLTP, a DW, a DSS, or mixed systems.
DBA's do it all the time because the requirements are different everywhere. Simply deleting a lot of data after copying the old data to another table (as some older systems do) may just wind up giving you performance problems scanning swiss-cheesed data.
Some places may not archive at all, if they've separated out OLTP from reporting. If all the OLTP stuff is accessed through indices, all the older stuff just sits there. The reporting DB may only have what is needed to be reported on, or be on a standby db where range scans are sufficient to ignore old data. There there's exadata, which has it's own strengths.
Best Practices have to be on similar enough systems, otherwise they are a self-contradiction.
Get yourself someone who understands your requirements and can evaluate the actual problem. No apology needed, it is not a silly question. But what is silly is assuming what the problem is with no evidence. -
Error while creating datasource userdsn for oracle 10g Errorcode (998)
while creating datasource userdsn for oracle 10g i am getting error "The setup routines for the oracle in OraDb10g_home1 odbc driver could not be loaded due to system error code 998" please give reply soon
Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="OracleDS"
location="jdbc/OracleCoreDS"
xa-location="jdbc/xa/OracleXADS"
ejb-location="jdbc/OracleDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott"
password="->pwForScott"
url="jdbc:oracle:thin:@localhost:1521:oracle"
inactivity-timeout="30"
/>
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam -
Oracle gateway for Oracle 10g DB on Windows 64 bit server
Is there any place that I can find Oracle dateway for Oracle 10g DB on Windows 64 bit server? I can only find Gateway for Oracle 11g on Windows 32 bit server. Please help me to identify this. Thanks.
yingkuan:
Thanks a lot. The link tells the details. It seems that Oracle has not release Gateway for Oracle database 10.2.0.x on Windows 64 bit server. Probably they don't do it.
So under this circumstance, if I want to install Gateway (32 bit) on Oracle 10.2.0.3 DB on Windows 64 bit server for Teradata, I probably have to install Gateway software in another Oracle Home, then configure it right. Please give more advice on this. 32 bit Gateway will work for 64 bit database? -
Note 830576 - Parameter recommendations for Oracle 10g
hi all DBA experts.
I am not good familiar with Oracle database while i read a Note 830576 - Parameter recommendations for Oracle 10g. in which SAP General Recommendation:
You should delete obsolete initialization parameters from the profile.
To determine which obsolete parameters are currently set, proceed as follows:
SQL> SELECT NAME FROM V$OBSOLETE_PARAMETER WHERE ISSPECIFIED = 'TRUE';
when i execute above command then result is no rows selected
while there are many parameters in above SAP Note which are already obsolete and not set in initSID.ora file.
for exp. the parameter OPTIMIZER_INDEX_COST_ADJ is showing
#### OPTIMIZER MODE
#optimizer_index_cost_adj = 10
as you know that this parameter is very important regarding System Performance.
now please guide me . I have to set these parameter or no need while there is not showing any parameters against obsolete command.
waiting you valuable reply.
Regards,hi both,
thanks for knowledge sharing with me other SDN users,
Dear Orkun,
Ok. At this stage, I can recommend you that apply what they have suggested,
in the message. So, you already did a part of it by configuring
Oracle parameters, already.
SAP support sent me this file (PRD_Parameters)
*** INFORMATION 1 ***
*** INFORMATION 2 ***
*** INFORMATION 3 ***
*** INFORMATION 4 ***
*** INFORMATION 5 ***
*** INFORMATION 6 ***
*** INFORMATION 7 ***
*** INFORMATION 8 ***
*** INFORMATION 9 ***
*** INFORMATION 10 ***
*** INFORMATION 11 ***
_b_tree_bitmap_plans
_fix_control (4728348)
event (10753)
event (38087)
event (10183)
optimizer_index_cost_adj
star_transformation_enabled
event (10027)
event (10028)
event (10411)
event (10629)
event (14532)
_fix_control (5705630)
_fix_control (5765456)
_optimizer_mjc_enabled
_sort_elimination_cost_ratio
event (10091)
event (10142)
event (38068)
event (38085)
event (44951)
parallel_execution_message_size
parallel_threads_per_cpu
query_rewrite_enabled
log_archive_dest_1
log_archive_format
max_dump_file_size
optimizer_features_enable
log_archive_dest
_push_join_union_view
_cursor_features_enabled
_first_spare_parameter
event (10049)
db_writer_processes
parallel_max_servers
db_cache_size
pga_aggregate_target
processes
sessions
dml_locks
job_queue_processes
log_checkpoint_interval
remote_login_passwordfile
sga_max_size
shared_pool_reserved_size
sort_area_retained_size
sort_area_size
statistics_level
workarea_size_policy
they only highlighted these following parameters from above
**** INFORMATION 8 *** DB Patchset: 10.2.0.4.0
**** INFORMATION 9 *** DB Mergefix: 0 (released before 2008-07-11)
FYI... recently, i applied the Oracle Patches 10.2.0.4 in this sequence
MS Windows x86-64 (64-bit)
Patchset_10204_MSWIN-x86-64aa.bin
Patchset_10204_MSWIN-x86-64ab.bin
Patchset_10204_MSWIN-x86-64ac.bin
OPatch
OPatch_10205_Generic_v0.zip
Generic (32-bit / 64-bit)
p8350262_10204_Generic.zip
p7592030_10204_WIN_GENERIC.zip
p9254968_10204_WIN_GENERIC.zip
10204_Patch44_MSWIN-x86-64.zip
p9584028_102040_Generic.zip
p9843740_10204_Generic.zip
and please tell me , still i have to apply highlighted parameters or now no need.
Regards, -
Where can I download the ODBC driver for Oracle 10g XE?
where can I download the ODBC driver for Oracle 10g XE?
I need the ODBC drivers for windows 7 x64, I installed Oracle Database 10g Express Edition, the use and connects with RazorSQL well, I just want to make a connection THROUGH ConnectionString language using the ODBC driveralready checked these http://www.connectionstrings.com/oracle, I need Help Please.
Maybe you are looking for
-
My ipod touch lost all its data due to my computer crashing and having to be rebooted. This resulted in all software being wiped - including iTunes. Therefore, I lost all my music, apps etc on my library on the computer. I then synced my iPod into th
-
Pan and Zoom (Ken Burns Effect)
Does iDVD 06 support the Ken Burns Effect? When I import a Slide Show from iPhoto to iDVD it looses the transitions and the pan and zoom features. I can add the transitions back through iDVD, but I can't find anywhere to add the Ken Burns effect back
-
Illustrator CC failing to install
I've tried several times to install Illustrator CC on my PC (32-bit, Windows 7 Pro). On each occasion I have uninstalled the application and gone through the whole downloading process. Each attempt has failed with the same error message: Exit Code: 6
-
I want to remove Firefox as my default browser. How?
I have a MAC Pro laptop -- all of the repsonses deal with PC environments. I know there is an easy solution. I just can't find it. I'd rather not delete Firefox from my computer but if I can't figure this out, I will. Thx
-
I have had to change my email 2 or 3 times and my apple id was recently changed as well. The screen on my ipad was cracked and I backed it up to the cloud and now I cannot retrieve it.