Hardware test on MBA model A1369 does not complete?

Suddenly can not start up. Trying to run hardware test with reinstall drive in, but test does not complete. No error codes. Any ideas?

Libby\'s Dad wrote:
but test does not complete.
what happens? Do it freeze, do you have to restart etc?

Similar Messages

  • Can't perform a Apple Hardware Test because the alternate menu does not appear after pressing "D" while it restarts. What can I do?

    I followed the instructions on the macbook manual and inserted the disk, i pressed and hold "D" but the menu did not appear.
    I want to know if there is anything that can be done.
    Thanks

    Is the DVD you are trying to use the original install DVD or a retail Snow Leopard DVD

  • Hi I need Apple Hardware test 2.5.2 Apple does'nt have it. Any one on here have a copy or know how I could get access to?Thaks

    hi I need Apple Hardware test 2.5.2 Apple does'nt have it, I orderit it and they no longer carry it so they say. Any one on here have a copy that I could get access to?Thanks

    What model PowerMac do you have? The AHT is on the Install/Restore disc that came with your Mac.
     Cheers, Tom

  • My ipad air model number does not match does that mean ink and slide won't work

    i just bought iPad Air last November but the model number does not match. Does that mean ink and slide won't work?

    No, they won't exchange it for you for free.

  • Visual Approval Action does not complete

    Hello,
    I am using Visual Approval Callable Object in my Application but when the approver goes into the workitem to approve it ...the action does not complete and he gets the following message...on clicking on Approve/Reject button:
    "Cannot complete action: The activity could not be read"
    When I test the CO in designtime ...it works fine....and i have used visual approval CO at other places also....it works fine there...only at this one it gives an issue...i tried recreating it ....and also tried to put in a different block...but still comes with the same error....
    Any help would be highly appreciated...
    Regards,
    Anil

    George,
    Thanks for the reply....I have checked the parameter mapping and the email address is also setup which is passed as a Context parameter for the Action processor ...but still gives the same error....
    Please help.

  • Syncing process does not complete

    I have 2 iphone 5S models that go through the entire sync process but the sync does not complete.  Gets to the last step, "waiting for changes to be applied" and then the sync stops.

    What step would that be - for photo transfer?

  • When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

    Problem:
    When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
    Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
    Symptoms:
    1)   Sync:  It’s not completing the sync.  Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options.  I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
    waiting for sync to start (step 1 of 7)
    backing up (step 2 of 7)
    preparing to sync (step 3 of 7)
    determining apps to sync (step 4 of 7)
    preparing apps to sync (step 5 of 7)
    importing photos (step 6 of 7)
    waiting for changes to be applied (step 7 of 7)
    syncing apps / copying 1 of 4 (App name) (step 7 of 7)
    canceling sync
    apple icon
    2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone.  All of the albums are correct/complete in iPhoto.  All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
    3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list.  If I click on Update All, the Apps are successfully updated in iTunes.  But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
    Other Potential Pertinent Info:
    The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago).  Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed.  I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive.  Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself.  However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive.  All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
    Settings/Status:
    MacBook Air
    OSX v. 10.9
    iPhoto ’11 v. 9.5 (902.7)
    iPhone iOS 7.0.4
    iTunes v. 11.1.3 (8)
    Summary Tab
    Backups (This Computer)
    Options
    Automatically sync when this iPhone is connected
    Sync only checked songs and videos
    Photos Tab
    Sync Photos from iPhoto (429 Photos)
    Selected albums, Events, and Faces, and automatically include (no Events)
    Albums – 9 are selected

    You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

  • So my Ipod touch hasn't been connecting to computer, or charging for a week or two until i turn it off completely and now i try to reset all content and setting, the circle goes round and round for like hrs(24) and it still does not complete the reset

    so my Ipod touch hasn't been connecting to computer, nor charging for a week or two until i turn it off completely and now i try to reset all content and setting,(thinking it may connect to the computer and itunes and also charge) but the circle goes round and round for like hrs(24) and it still does not complete the reset.
    pls pls pls pls help .
    i have tried alot of solutions, but non of them have worked.

    Have you tried walking it into the nearest Apple Store and asking for assistance there...?
    I'm guessing you don't have Apple Care on it.

  • After installing the latest itunes/quicktime update, I can no longer access the itunes store and my iphone does not complete syncing. What can I do to fix this?

    After installing the latest itunes/quicktime update I can no longer acces the itunes store nad my iphone does not complete syncing. What can I do to fix this?  I have tried uninstalling and reinstalling itunes.  I have uninstalled and reinstalled windows updates. I have checked the firewall settings. what else?

    The problem is with version 10.4.1.  I had to reload 10.3 to get it to work.  The recommendation from a previous poster worked for me.  Here was their list of steps:
    Go to Control Panel>Programs>Uninstall
    2.  Uninstall the following Apple programs in the following order:
         a. iTunes
         b. QuickTime
         c. Apple Software Update
         d. Apple Mobile Devices Support
         e. Bonjour
         f.  Apple Appllcation Support
    3.  Reboot PC
    4.  Find, Download and Install iTunes 10.3 (you can find it at FileHippo.com)
    If you start iTunes now you will get an error message saying that the current iTunes library was created by a newer version of iTunes.  To correct this:
    5.  Go to your Music>iTunes folder and delete the "iTunes Library.itl" database file
    6.  Within this iTunes folder find and open the "Previous iTunes Libraries" folder and locate the most recently dated "iTunes Library (date).itl" database file.
    7.  Copy and Paste this file back into the iTunes folder
    8.  Rename this "iTunes Library (date).itl" file by removing the date.  It should say "iTunes Library.itl"
    9.  Reboot PC

  • When i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP

    when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
    Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
    The disk i am using is nextech and i am burning at the slowest speed (4x).
    Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?

    see there
    http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
    what you like most
    try different brand of CD/DVD

  • I can't get iWeb started. It does not complete the starting procedure

    I can;t start iWeb. It does not complete the startup procedure, and then becomes frozen. I've installediWeb 3.04, but same results. What can I do?

    Try the following:
    delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    Click to view full size
    launch iWeb and try again.
    Happy New Year

  • When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

    When I sync my phone it gets to step 6 the does not complete the sync i get a message that says itunes has stopped working and needs to close anyone else have this issue

    The same problem here!... My itunes stucks on "preparing to sync" when sync my ipad 2, and stucks on iphone 4 calendar sync...
    Any solution?? Need help, please!!
    Macbook pro 13 i7
    Iphone 4
    Ipad 2
    Thanks!!!

  • When I try to sync my iPod iCal with my MBP iCal via WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete"

    When I try to sync my iPod iCal with my MBP (OS 10.7) iCal via iTunes and WiFi I get a message saying "Safari Downloading Safe Browsing Data" but I am connected to a local network and thus the syncing does not complete because the downloading never completes because I am not connected to the internet.
    Why does syncing iCal need Safari Safe Browsing Data?  How can I turn this off?

    See:
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    "Safari Downloading Safe Browsing Data" is just some data that is synce with the computer. To turn off on the Mac go to System Preferencs>iCloud and turn off Safari

  • Data streaming between server and client does not complete

    Using an ad-hoc app, data streaming between server
    and client does not complete as it supposed to be.
    The process runs well in solaris 5.8, however under 5.9
    we have found the characters stream buffer length limitation
    is around 900 to 950 characters (by default we are using 3072
    characters).
    Example:
    - We are transfering HTML file, which will be displayed
    in the App client, with buffer=3072, the HTML only displayed / transfered
    as xxxxxxxx characters, but with buffer=900 the HTML is displayed properly,
    in this case, the only problem that we have is the file transfer will
    eventually longer than usual.
    - There is another case, where we have to transfer information (data) as stream
    to the client. A long data stream will not appear at all in the client.
    Any ideas why the change between 5.8 and 5.9 woudl cause problems?
    The current app-driver that we are using is compiled using Solaris 5.6,
    if possible we would like to have use of a later version, which is compiled using Solaris 5.9, do you think this will probably solve our problem?
    Thanks
    Paul

    Does this have anything to do with Java RMI? or with Java come to think of it?

  • HT1222 Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?

    Please Help.. When I update to 7.0.6 I remark a very low battery lifetime I does not complete 2 hours.. I update to 7.1 to get rid of this problem but unforeately the problem still.. Could you please guide what to do?

    Restore as New (no backup)... then Re-Sync your Content.
    Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
    iTunes free download from www.itunes.com/download

Maybe you are looking for