Hardware Wizard is unable to Install... Why? Is there a Blackberry Support Line???

My PC recognizes when I insert the USB connection to my Curve 9300 however it does not complete the set up due to "Cannot creat a stable subkey under a volatile parent key".

Check it via Disk Utility (in your Applications/Utilities folder) on Snow Leopard:
If that says there's a problem, too, there's likely a problem. 
Be sure your backups are up-to-date, and let Apple have a look at it: http://www.apple.com/retail/geniusbar/

Similar Messages

  • Why is there not applescript support in iWork '13?

    I have workflows that used to interface with iWork documents through applescript and now there is no support. Why would this be done? Is there a new script for iWork to get these working again. Without outside interface iWork is useless to me.

    Until Apple adds it back, you can use Pages 4.  It should still be on your machine in Applications/iWork.
    Tell Apple you want this via
    http://www.apple.com/feedback

  • Why is there no FLAC support in iTunes?

    Why is there no support for flac in quicktime/iTunes ? It is a major mistake as you are leaving many of us tape traders/ OCD music collectors out in the cold. As "serious" as Apple is at supporting us professional users with wonderful programs like Logic, Final Cut and Aperture, you forget that we use iTunes too. SUPPORT FLAC!
    -Josh

    Sorry, but we're all just your fellow users here, so none of us have any insight into why Apple includes or leaves out any given feature. If you want to make a suggestion to Apple, the best place (since there's currently no feedback page for the iTunes application) would be through the Mac OS X feedback page.

  • Why is there no eprint support for open document formats, such as those produced by openoffice

    Why doesn't the eprint service support open document formats? This should be a minimal requirement!

    Sorry, as important as this issue is to all of us who use Firefox, this is a Firefox support forum - not an appropriate place to start a discussion like this.
    I'm locking this thread for two other reasons though. <br />
    # An appropriate hyperlink to the original article wasn't provided.
    # Copy and paste from the original article without quotation marks or proper attribution.

  • Why is there no tab support on adobe reader 9.1 in Windows 7 variant

    Please provide this feature. I have used it in my Linux machine. Can the same not be just propagated to Win 7?

    That problem surfaced since Win7 early builds, confirmed in Beta and Release Candidate and also happens on the latest build 7260. No problem with the update feature, though. This morning Adobe updater installed version 9.1.2 without hassle.
    Let's wait to know is someone here may help us in fixig this issue.
    Thanks Alex

  • Why is there a solid white line on left "border" of iphone 4 display screen?

    A solid white line appeared on the left of the screen a few hours ago, from top to bottom of my iphone4 display.
    It is almost as if the whole screen is off center by 1 mm. I have tried to restart hard-power off, even restored it. Help!
    Thank you in advance.

    Hey Alliemac71639,
    Thanks for the question. I understand you are experiencing issues with your iPhone 6 Plus display. The following resource outlines some great troubleshooting steps::
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Display image issues
    This can include bright or dark pixels, lines in video, or sections of video missing.
    1. Try turning iPhone off and then on again.
    2. Verify the issue is not content related, by viewing different content.
    3. If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaper and slide the slider.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks,
    Matt M.

  • Why is there only proper support for professional users

    1. I have 4 HP printers, 1 wireless and 1 wired at home and 2 wired at my office.
    Wheneven I want to switch between my office printers and  my home printers I have to reinstall the entire HPL Solution Center to get my wireless printer to work because HP Solution Center only knows USB and wired. {content removed} is this an idea to sell more printers.
    I've placed this question on the board several times without any response and now I'm sick of it. (content removed) as a developer myself I know this can't take more than 3 days to rewrite since all components are proprely named. At least I hope your developers are at least that smart.
    I'm tired of reinstalling you software every time I switch printers. {content removed}
    2. why is commercial support only done by communities and you need to pay to get some real support? is it because you only care about your paycheck {content removed}

    Welcome to the HP Consumer Support Community.
    This is a peer-to-peer community for customers to connect and share solutions regarding their HP products. It is not a venue to contact HP directly. If you have additional or direct feedback for HP about their products or services, please use the link below for alternate contacts.
    http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
    If you have other questions and concerns about using the forum, please feel free to send me a private message.
    Thank you.
    Clicking the "Kudos star" to the left is a great way to say thanks!
    When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
    Rules of Participation

  • WHY IS THERE NO DIRECT SUPPORT FROM APPLE

    It is so hard to know if the support from the Apple support community is legit when one is not tech savvy we have members calling each other names, lingo that I don't undertsand and the last time I tried some advice I buggered up my whole system!!
    My issues with search for emails on me.com or it simply cant be done ... I don't see why its so hard. I joined mobile me as internet had issues in China for gmail.
    Now its a nightmare and Apple is doing nothing about it. I don't even know who to ask about getting out of icloud mail or reroute all me emails back to gmail now that I have a VPN.
    I looked at the related forums and there is never a clear cut answer helllllpppp!!

    If you want support from Apple you need to contact them by phone or visit a store.
    If you are still under warranty, that would be the best thing to do anyway.
    There are no Apple techs here on these forums. Apart from the hosts who manage the site, all the people posting here are volunteers; users, the same as you.
    The quality of the advice varies, and considering it costs nothing, I'd argue it is good value, but one should be prudent and not believe everything that is said, though you could also apply the same to life in general.
    This site is more extensive than many realize and finding the right place to post your problem can help enormously, as people tend to hang in the forums that they know most about.
    Here is a link to the site map to explore.
    http://www.apple.com/support/sitemap/
    Remember you can always contact an Apple store for professional help.

  • Why mountain lion don't support line 6 audio interfaces ?

    Greetings
    Last week, I bought this OSX online, but while testing it with audio interfaces Line 6 (toneport UX2), it results in noises and scratches running in garage band and logic pro. I adjusted the buffer to an optimal setting, but nothing fixes the noises. My last resort is to downgrade to Lion, on this OS the programs work perfectly, but I´d rather try a solution that does not cause me to have wasted my money on the OS.

    Had the problem up until today. Just installed the latest drivers (version 7.2.9, released 7/10/13) from Line 6, rebooted, and the mic is back to normal in Logic Pro X on a MacPro 2009 on Mountain Lion. http://line6.com/software/index.html

  • Why is there a thin gray line at the top of my home screen on iPhone 6plus?

    The top of my home screen has a thin gray bar and the very top of my iPhone 6plus

    Hey Alliemac71639,
    Thanks for the question. I understand you are experiencing issues with your iPhone 6 Plus display. The following resource outlines some great troubleshooting steps::
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Display image issues
    This can include bright or dark pixels, lines in video, or sections of video missing.
    1. Try turning iPhone off and then on again.
    2. Verify the issue is not content related, by viewing different content.
    3. If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaper and slide the slider.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks,
    Matt M.

  • Why is there a small rainbow line thing on my iPod screen?!

    title says it all.
    iOS 7.1.1, IPod 5,1

    I can't envision what you are seeing.
    Does it appear in a screen shot? If yes that means a graphics problem. If it does not show that indicates a problem with the display.
    Have you tried:
    - Reset all settings. This accomplishes more that the button reset which you can't do                 
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Why is there no official support from apple to use an iPad as second display for mac/PC?

    I know there are one or two apps for that but they work over a wifi network, which is very laggy. I feel like an official solution would work ten times better, especially if apple'd be willing to construct a new port on the iPad to make it wired. This will eliminate lag and power issues.
    I personally love the ipad, but it has literally zero added value to my life. If this particular option becomes available though, I'll buy an iPad that same day.

    Send your suggestion to Apple.
    http://www.apple.com/feedback/ipad.html
     Cheers, Tom

  • Why is there not more support from VMware for Sprng 1.2 for Python

    It would seem that VMware/Pivotal would support the framework that was created for Python. What happened?

    If you want support from Apple you need to contact them by phone or visit a store.
    If you are still under warranty, that would be the best thing to do anyway.
    There are no Apple techs here on these forums. Apart from the hosts who manage the site, all the people posting here are volunteers; users, the same as you.
    The quality of the advice varies, and considering it costs nothing, I'd argue it is good value, but one should be prudent and not believe everything that is said, though you could also apply the same to life in general.
    This site is more extensive than many realize and finding the right place to post your problem can help enormously, as people tend to hang in the forums that they know most about.
    Here is a link to the site map to explore.
    http://www.apple.com/support/sitemap/
    Remember you can always contact an Apple store for professional help.

  • Why is there no technical support

    Talking to somebody that can understand English from India would be an improvement you have no phone number you have no email there's no way to contact you would somebody please contact me about my number thank you

    Hi dc! We're sorry for the inconvenience. Our printer phone support team is here Monday-Friday 10:00 a.m. - 10:00 p.m. EST, excluding holidays, however our e-mail support is 24 hours, feel free to contact them if you need immediate assistance. Click this link to reach us: http://bit.ly/ContactCanon 

  • Why is there a thin dark line between two of my three cover images that wasn't there before?  When I delete the images, you can tell that there is extra space between the first two image boxes.

    Getting ready to purchase my first book, I looked over everything once more and noticed that there is now a thin gray line between the first two of my three cover images.  I believe this may have happened when I switched out the left image.  When I delete the images, you can see an extra space between the center and left image boxes.  How can I fix this without starting over?

    What size book? Are you previewing this way -
    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    LN

Maybe you are looking for

  • NF-e parada no passo de Assinatura após queda do PI

    Olá Pessoal, Na semana passada tivemos um problema com a máquina do PI e GRC (as duas aplicações estão na mesma instância) que ficou fora durante um periodo de 4 horas. Ao retornar, a maioria das Notas puderam ser reinicializadas pelo proprio monitor

  • What are new features in BCS 6.0 compared with earlier versions?

    Hi, What are new features in BCS 6.0 compared with earlier versions. Can someone tell in few lines .. just the summary and we can find the docs since it is not seen in service.sap.com. Many thanks, Regards, Ricardo Ferrã

  • Automatic Import of Electronic Bank Statements (EBS)

    Hi SAP Gurus, We want to solve the following issue: Daily we receive multiple Electronic Bank Statements by means of banking Communication Software (BCS). Those EBS files are stored on our SAP Application Server, filetype = SWIFT MT940 format, and th

  • App error 404 twaio

    I downloaded the app 'twatio' and when I try logging in in shows up 'error 404' •I reinstalled the app and same problem Anyone have any ideas how to fix the problem?

  • How to average each element in an array

    I have data from a Gage Card that I would like to average.  I am tuning a laser over a 50 mA range and for each 1mA increment in current, I am taking 100 scans.  Each scan consisting of about 200 points.  I cannot average more than 10 shots using the