Harm Millaard You're Correct

The nVIDIA Quadro FX 3800 is slower
When compared to cheaper gaming cards it dropped the Windows performance for Graphics and Gaming Graphics from a score of 7.4 to 6.9.
It's a good thing I don't play games, but it is a bit of a shock to pay at least four times more for a card to see that much lower score. However, when scrubbing it's a delight.
Having said that, I do have a couple of questions which hopefully you or someone here can clear them up for me:
- When loading the latest card driver it allocated the monitors in reverse from the basic driver which installed itself right after installing the card, i.e. the monitor plugged into the DVI-I port (identified as #1) it is shown as #2 monitor and the one plugged into the DisplayPort (identified as #2) now is the #1 monitor. The DisplayPort cable's other end is a DVI-D connector and the DVI-I port is connected with a DVI-I cable (also this monitor is DVI-I compatible). Have you encountered or heard of this? It is not a serious issue and of course solvable by configuring the display one wants to use, just a concern since I've never incountered this before.
- This brings me to my second question; is it better to use both DisplayPorts, rather than what I've done?
Thanks and Cheers,
Michael

Sometimes it pays to buy more than one needs
In this case it's an adapter cable from DisplaPort to DVI-I. These are not always readily available in my area and I ended up with two because I was concerned about delivery from one supplier. Of course having done so they both arrived at the same time...
As indicated earlier, I now connected the main monitor to the DisplayPort #2 and the secondary monitor to #3 port on the card, both of which are DisplayPorts.
Is there a visible difference - YES. Better than I expected! Color graduation from light to dark shows no banding, which was not the case with the previous graphic cards.
Although not important, the monitor sequence is now #1 and #2 for the main and secondary monitor.
One more point, when I had the DVI-I cable connected to port #1 the signal received by the monitor was in analog format, now it is in Digital format, but without HDCP... Interesting...
Cheers,
Michael

Similar Messages

How do you "image correction" in PREVIEW in a macbook pro? I have an iBook G4 that gives it as an option in the tools drop down window.

how do you "image correction" in PREVIEW in a macbook pro? I have an iBook G4 that gives it as an option in the tools drop down window.

From preview:
Tools-> Adjust Color-> Auto Levels
Or you can import the image into iPhoto:
Edit-> Enhance

Can you pls correct this query :: ( In Oracle Core HRMS )

Dear all,
i have created query get result :: ( In Oracle Core HRMS )
•     EE Number
•     Forename
•     Surname
•     Dept
•     Start Date
•     Leave Date
•     Date of Birth
•     Address
•     Salary (New & Existing Employee)
•     Car Allowance
•     Effective date (changes/updates)
•     Creation Date/Update date
•     Email address
•     Gender
•     Job Description
•     Grade
•     From and to date for parametres
•     Last Modified Date
SELECT
papf.EMPLOYEE_NUMBER emp_no
, papf.FIRST_NAME forname
, papf.LAST_NAME surname
, replace(replace(hou.attribute1,'10-',''), '14-', '') department
, pps.date_start strt_date
, pps.actual_termination_date leave_date
, papf.DATE_OF_BIRTH dob
, pdd.ADDRESS_LINE1||''||pdd.ADDRESS_LINE2||','||pdd.ADDRESS_LINE3 Address
, ppp.proposed_salary_n salary
, papf.EFFECTIVE_START_DATE estart_date
, papf.EFFECTIVE_END_DATE eend_date
, papf.CREATION_DATE crt_date
, papf.EMAIL_ADDRESS mail_addrs
, papf.SEX GENDER
, pj.NAME Job_Des
, substr(pg.name, 1, 1) GRADE
, papf.LAST_UPDATE_DATE Last_Modified_Date
FROM per_all_people_f papf
, per_all_assignments_f paaf
, per_addresses pdd
, per_pay_proposals ppp
, per_grades pg
, pay_payrolls_f pp
, per_jobs pj
, per_periods_of_service pps
, per_person_types ppt
, per_person_type_usages_f pptu
-- , pay_element_entries_f pee
, hr_organization_units hou
WHERE papf.person_id = paaf.person_id
AND papf.person_id = pdd.person_id
AND papf.person_id = pptu.person_id
and papf.person_id = pps.person_id
and pps.period_of_service_id = paaf.period_of_service_id
AND ppp.assignment_id = paaf.assignment_id
-- AND pee.assignment_id = paaf.assignment_id
AND paaf.grade_id = pg.grade_id
AND paaf.payroll_id = pp.payroll_id
AND pptu.person_type_id = ppt.person_type_id
AND paaf.organization_id = hou.organization_id
AND pj.job_id = paaf.job_id
AND ppp.pay_proposal_id = (SELECT MAX (pay_proposal_id)
FROM per_pay_proposals
WHERE assignment_id = paaf.assignment_id)
AND pp.payroll_id = 224
AND pdd.primary_flag = 'Y'
AND pee.element_type_id = 221 for car allowance
AND papf.employee_number <> 'NONE'
AND ppt.user_person_type in ('Employee', 'Ex-employee' ,'Intern')
AND ppt.system_person_type in ('EX_EMP', 'EMP')
AND TRUNC(SYSDATE) between papf.effective_start_date and papf.effective_end_date
AND TRUNC(SYSDATE) between paaf.effective_start_date and paaf.effective_end_date
AND TRUNC(SYSDATE) between pptu.effective_start_date and pptu.effective_end_date ;
can you pls correct this
still i need to add Car Allowance and Bank details in above query pls tell me where i can get dept details in oracle core HR
Thanks all
Edited by: 981527 on Jan 30, 2013 3:41 AM
Edited by: 981527 on Jan 31, 2013 1:22 AM
Edited by: 981527 on Jan 31, 2013 1:30 AM
Edited by: 981527 on Jan 31, 2013 9:03 PM
Edited by: 981527 on Feb 1, 2013 4:50 AM

I am taking a guess that 'Dept' is where the employee works, so that will be the column 'NAME' in the table HR_ALL_ORGANIZATION_UNITS; you will need to join with this table on the assignment's organization_id value
Edited to add: Whilst you're testing this, you might want to consider removing the table PAY_ELEMENT_ENTRIES_F from the table list, otherwise you can look forward to potentially large cartesian product of returned rows!
Clive
Edited by: clive_t on 31-Jan-2013 09:59

It was found an error in the OPF file: The file is not stored in Cover guide . To ensure the navigation on Kindle devices, you should correct that.

Hi,
I have found errors when uploading the ePub 3 fixed layout classic ebooks on Apple.
It was found an error in the OPF file: The file is not stored in Cover <guide>. To ensure the navigation on Kindle devices, you should correct that.
Please help me?
Thanks,
CK

Thank you but please help me solve this problem.
Kindly look at the below error:
It was found an error in the OPF file: The file is not stored in Cover <guide>. To ensure the navigation on Kindle devices, you should correct that.
Please let me know how it will solve.
Thanks,
CK

Display Error: The display template had an error. You can correct it by fixing the template or by changing the display template used in either the Web Part properties or Result Types. $(...).slick is not a function (OnPostRender: )

Hi Team,
I implemented news carousel using display template concepts.
Its working.
But some times it shows like some thing went wrong
when clicke on show details
it showing the error like
Display Error: The display template had an error. You can correct it by fixing the template or by changing the display template used in either the Web Part properties or Result Types.
$(...).slick is not a function (OnPostRender: )
some times showing result and while refreshing the page am getting the error like below
How to fix the issue
Regards,
Dhayanand

Hi Wendy Li,
Finally we fixed.
The prob is that we referring two different version of jquery files in master page and page layout.
We corrected by referring same version of jquery files in both pages
Regards,
Dhayanand

Could you please correct me - how to use

Could you please correct me how can I use category in WHERE condition ?
LOOP AT gt_zgfld_prctr
INTO wa_zgfld_prctr
<b>WHERE category CO LIMIT_PRCTR%</b>.
Thanks,

Hi,
Please try this.
ranges: r_category for gt_zgfld_prctr-category.
r_category-sign = 'I'.
r_category-option = 'CP'.
r_category-low = 'LIMIT_PRCTR%'.
append r_category.
LOOP AT gt_zgfld_prctr
INTO wa_zgfld_prctr
WHERE category IN r_category.
ENDLOOP.
Regards,
Ferry Lianto

F&G Committee "F&G Committee" is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail.

With this new v.31.1.0, released: September 2, 2014 version of Thunderbird, I can no longer e-mail to a Contact List of addressees, getting the error msg: F&G Committee <"F&G Committee"> is not a valid e-mail address because it is not of the form user@host. You must correct it before sending the e-mail. In earlier versions, the individual e-mail addresses in the list (F&G Committee in this case) are automatically put in as the e-mail is sent. Is there a solution to this problem?

Read this.
https://support.mozilla.org/en-US/questions/1019019

How do you determine correct monitor resolution

monitor resolution changes in system preferences is not restting the display back to correct resolution.
how do i determine the correct setting so the desktop image is not running off the sides of the screen?

do you choose the "best for display" radio button ?
for me that set the correct resolution
of cause if you set it to mirror it will not be it's native resolution if the display it's mirroring is in a lower resolution

Is there a code checker that will give you the correct code?

I have a website that I started using a bought template, I deleted all of the content except the navigation buttons. The problem now is that there are ALOT of broken links and coding errors. Is there a site that will show me what the correct code should be?
www.cfaai.com
Heidi

Hello Heidi,
I prefer an external FTP program. The difficulties with which you have to fight encourage me in this opinion, not least because we always search for experts, we don't charge a "jack of all trades".
For this reason, to manage, for example, several websites or to upload my files and sometimes for the opposite way, for a necessary download from my server or to use a "a site-wide synch", I'm using FileZilla. It simply looks easier for me to keep track of all operations precisely and generate or reflect easily the desired tree structure.
Above all, FileZilla has a feature (translation from my German FileZilla) called "compare file list". Here it's possible to use file size or modification time as a criterion. There is also the possibility to "hide identical files", so that only these files which you want to redact remain visible.
And even if it means you have to install a new program, I am convinced that there is an advantage. Here is the link to get it and where you can read informations about how it works:
http://filezilla-project.org/ and
http://wiki.filezilla-project.org/Tutorial#Using_the_site_manager
Mac: Mac OS X
http://filezilla-project.org/download.php
Of course, you also need all the access data to reach your server.
Good luck
Hans-Günter

Can you color correct before rendering?

This is a simple beginner question.
Lets say I make something that's 20 min long with a lot of cuts and I want to color correct the whole thing as one. Is there a way to do that before rendering it out or will I have to render it out for several hours, import it back in, color correct and then render it out a second time?

If you're using Premiere cs6 you can simply use a adjustment layer for doing this color correction task. Just take the adjustment layer and extend it on a video track over top of all your video clips and put your desired CC effect on the adjustment layer then you're ready to roll.
If you don't have Premiere Pro cs6 and you have cs4 cs5 or you have 5.5 then you can create a new sequence that matches your exact settings used in your original sequence, then take your original sequence and drag and drop it into your new sequence/timeline and then stick the color correction effect on your old sequence once it's inside the new sequence you just created.

Where Would You Color-Correct in This Workflow?

I shot talent in front of a green screen. I am putting the pre-liminary edit together in FCP. From there, I'll use Automatic Duck to move the project to After Effects. There, I'll use Keylight to remove the greenscreen using Keylight. Then I want to insert a solid orange background and eventually return to FCP. Given gamma issues going back and forth with FCP/AE and the potential for an alpha channel I'm curious where one should color correct the talent.

why not shoot the talent against orange and save yourself a lot of work?
There's a lot to be said about practicals, but it takes a lot of lighting if you want an "electronically flat" background. Even the lens will be working against you. White is particularly difficult.
But if you still wanted to engineer the shot as a matte-screen, why not use the target bg colour as the matte colour? Because of how cameras and codecs work. Its a fundamental issue.
Usually there's a primary sensor which is producing a tristimulus representation of the scene. Then those values are perverted and compromised in ways that allow it to be stored in an economically feasible way. If only there was a way of recording the original sensor values that didn't require a skyscraper full of recording medium! I'm thinking specifically about the so-called "4K" RED and what you would actually need to store an RGB motion picture file of about 45.59 MegaBytes per frame. And even then there would be issues with the de-Bayering.
Until further notice, orange is a combination of all three values of red, blue and green. Mattes work better with a single primary like blue or green. Red is out for obvious reasons (flesh tone), and blue is usually regarded as too low-luminance and noisy to be useful. Green it is.
Green is also the major Luminance contribution (about 60%) to the Y signal in YCbCr, so its a better choice. Its a trade-off that will require de-coding and spill control, but this is our reality.
So, shooting it as intentioned -- maybe. You would still need a fair amount of time and effort to do it right -- spill, flare, evenness, footprints on the set, cyclorama blending... let me count the ways...
jPo
Message was edited by: JP Owens

Adobe Flash Player has been crashing for months. Can you please correct associated problems?

The following is the message after the successful download from within Microsoft Internet Explorer and Installation of Adobe Flash Player on 8/17/2011 (today): You are now running Adobe Flash Player 10.3.183.5
And the following version of Adobe Shockwave Flash Player was downloaded and installed as a plug-in for Mozilla Firefox on 8/15/2011: Shockwave Flash 10.3.183.5
The following link was not working, and in fact access deteriorated since installing the latest Firefox plug-in for Adobe Shockwave Flash Player.
http://bigcharts.marketwatch.com/interchart/interchart.asp?symb=DJIA&time=20
For example it stopped supplying daily data for longer Timelines. Then yesterday the panel on the left side of the webpage appeared garbled. I had been continually getting crashes of the Flash Player for months but never got any notice that I was not up to date.
The following is the message after the successful download from within Microsoft Internet Explorer and Installation of Adobe Flash Player on 8/17/2011: You are now running Adobe Flash Player 10.3.183.5
And the following version of Adobe Flash Player was downloaded and installed as a plug-in for Mozilla Firefox on 8/15/2011: Shockwave Flash 10.3.183.5 This did not result in the end of continuing crashes of the plug-in. I find it strange that months of agreeing to send these crash reports did not result in any notifications of updates to Firefox.
Confusion has been introduced because of the similar names for the same application. Microsoft Internet Explorer’s notification states that Adobe Flash Player is not up to date and requests download and installation of the same version that had already been installed within Mozilla Firefox, which refers to this application as Shockwave Flash (of the same version). PLEASE SEE IF USERS CAN BE PROVIDED WITH SOME DISCUSSION OF THE DISTINCTION BETWEEN THESE APPLICATIONS.
What appears currently as fixes on the Firefox website for this application does not fix the problem, but so far it seems that the download from Internet Explorer of Adobe Flash Player (today) fixes the problem of the plug-in. This fix was NOT mentioned within the Mozilla Firefox website. Please note that at this point I do not have enough experience using the “fix” to know if I will not continue to have other problems with this plug-in.
I'm running Windows XP (latest SP and updates) and cannot use Internet Explorer beyond Version 8, since the later versions are apparently only for later MS OSs. Updating to a later OS with older hardware I do not believe is advisable.

The following is the message after the successful download from within Microsoft Internet Explorer and Installation of Adobe Flash Player on 8/17/2011 (today): You are now running Adobe Flash Player 10.3.183.5
And the following version of Adobe Shockwave Flash Player was downloaded and installed as a plug-in for Mozilla Firefox on 8/15/2011: Shockwave Flash 10.3.183.5
The following link was not working, and in fact access deteriorated since installing the latest Firefox plug-in for Adobe Shockwave Flash Player.
http://bigcharts.marketwatch.com/interchart/interchart.asp?symb=DJIA&time=20
For example it stopped supplying daily data for longer Timelines. Then yesterday the panel on the left side of the webpage appeared garbled. I had been continually getting crashes of the Flash Player for months but never got any notice that I was not up to date.
The following is the message after the successful download from within Microsoft Internet Explorer and Installation of Adobe Flash Player on 8/17/2011: You are now running Adobe Flash Player 10.3.183.5
And the following version of Adobe Flash Player was downloaded and installed as a plug-in for Mozilla Firefox on 8/15/2011: Shockwave Flash 10.3.183.5 This did not result in the end of continuing crashes of the plug-in. I find it strange that months of agreeing to send these crash reports did not result in any notifications of updates to Firefox.
Confusion has been introduced because of the similar names for the same application. Microsoft Internet Explorer’s notification states that Adobe Flash Player is not up to date and requests download and installation of the same version that had already been installed within Mozilla Firefox, which refers to this application as Shockwave Flash (of the same version). PLEASE SEE IF USERS CAN BE PROVIDED WITH SOME DISCUSSION OF THE DISTINCTION BETWEEN THESE APPLICATIONS.
What appears currently as fixes on the Firefox website for this application does not fix the problem, but so far it seems that the download from Internet Explorer of Adobe Flash Player (today) fixes the problem of the plug-in. This fix was NOT mentioned within the Mozilla Firefox website. Please note that at this point I do not have enough experience using the “fix” to know if I will not continue to have other problems with this plug-in.
I'm running Windows XP (latest SP and updates) and cannot use Internet Explorer beyond Version 8, since the later versions are apparently only for later MS OSs. Updating to a later OS with older hardware I do not believe is advisable.

How to tell if you have correct USB 2.0 driver?

Hi,
I seem to be having a problem with my front panel usb wich are plug in JUSB3. When i connect a external case in these front panel i get message that a have a high speed device plug in a low speed hub. My D-bracket is install in JUSB2. If i plug my case in the d-bracket usb no problem the case work full speed.
Here's what i have in device manager :
Universal serial Bus Controllers
USB Mass Storage Device
USB Printing Support
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
VIA rev 5 or later USB Universal Host Controller
VIA rev 5 or later USB Universal Host Controller
VIA rev 5 or later USB Universal Host Controller
Via USB 2.0 Enhanced Host Controller
AMD 1.53ghz
KT3ULTRA
1G DDR
Windows Server 2003 32 bit enterprise
Thanks

Hi,Welcome to Apple Discussions.
No Titanium Powerbook has native USB2 (you can add it with a PCMCIA card). If you bought your PB a year ago from new then its not Ti but Al.
To confirm if you have USB2:
Apple Menu > About This Mac > More Info > Hardware > USB > .... Then look to see if you have USB High Speed Bus(480MBps) or just USB Bus (12MBps) listed.
You could also post back your processor speed and we'll tell you!
You can still use USB1 on the iPod but it will be very very slow. If you do have a Ti - time to invest in a USB2 adaptor.
mrtotes

HT5787 what happens when someone sell second iphone and does not give you the correct password

what happens when someone sell second iphone and does not give you

If you are talking about activation lock you are out of luck. Without that information you cannot activate the device and have just lost your money. Unless you can find the person and get your money back.

I am using FF 5.0.1. The English spellchecker add on does not work.It will underline the misspelled word but does not give you the correct spelling choice.

I did not upgrade to 4.0 because I did not like it.I thought I was upgrading finally to 4.0 assuming at this date they had fixed all the bugs and updated the add ons.
I downloaded the latest version and love it, love it except the one add on that I use more than anything does not work properly.:-(
Please notify the developer of this issue.

"SafeBrowser'',
No it does NOT show up as I said before the ONLY option is "paste" there are NO suggestions showing up.
As I said before,I have used this same add on for many years and earlier versions and have had no problems until version FF5.01.
''cor-el'',
I have already done all that prior to posting here.
Even as I type this response the spell check add on puts a red squigly line under your screen names but does not give me any suggestions.
I am frustrated beyond belief because I am a faithful and dedicated user of this browser and I am going to just roll back to a older version until this silly issue is resolved.
I appreciate all your help but I suppose until the person who developed this add on does something to make it compatible with FF5.01 I will not be using it.
I apologize for any misspelled words but my spell check extension is not working properly. :-(

Harm Millaard You're Correct

Similar Messages

Maybe you are looking for