Harman-kardon speakers and various loud noises( mac mini)

My Harman-Kardon ball speakers, which have served me well from my old Cube days, are going loopy.
They have been happily USB connected to my 17" studio display (and powered from it) Recently, I've been hearing clicking noises, which can turn to a very loud 'rushing' sound if the computer has been active for more than an hour. I know some have had software issues with their sound systems due to 10.4 updates, but none reported very loud sounds. I came home yesterday to what sounded like an apartment fire alarm, it was that loud, but it was only my 'sleeping' computer. The noise ended when I pulled out the USB.
Could it be software? I don't want to buy new speakers if it might be. Or, time for knew speakers?-- if so, any advice? Happy New Year. Kevin

While it may not be all that helpful, I had some issues with an Altec lansing speaker set on my G5, where background noise was abnormally high almost all the time, and from time to time there would be rushing noises which grew very loud. It turned out to be a faulty USB hub, even though the speakers were not USB connected.
To troubleshoot your system, I would disconnect everything external bar the basic essentials, including any hubs or other devices, even the keyboard and mouse, and test the system that way. It would not be expected for software or MacOS itself to cause the sort of effects you describe.

Similar Messages

HP f1703 Monitor and Harman/Kardon Speakers

I have an HP f1703 monitor that is about nine years old. It is different from the image on the HP support site for this model number -- mine does not have integrated speakers. It came bundled with a pair of Harman/Kardon speakers that draw power from the monitor itself (no separate power supply).
A couple of days ago, while using my XP machine, the monitor suddenly began blinking between a black screen and the desktop. It's a steady blink. It continues to do this when the VGA cord is not attached and when hooked up to a second desktop. I used a spare power cable of the same rating and it contines to blink. It seems safe to state the monitor is a goner. If there are any simple troubleshooting tips, I'd greatly appreciate them.
But my main question is this: Since the speakers did not come with a separate power supply, is it safe to use the monitor's power supply with them? The jack fits perfectly and when plugged in an outlet, there is no intererence, crackling or anything. I don't want to fry my soundcard or motherboard.
The model number on the speakers is HP 5187-2105. The power rating is DC 12V 1A.
Any help and/or advice is greatly appreciated. Thank you.
This question was solved.
View Solution.

Hello FireDragon,
This is an interesting case. I have found the speakers online through Amazon so they are sold separately without the monitor and it comes with a power supply. What I can't find is the wattage the power supply is.
With that being said I can't say for 100% certainty that the power supply can be used, I believe that you should not have any issues though.
I would also say that (and this is probably not the answer you want to hear) speakers can be relatively cheap and you may be better off just purchasing a new set of speakers.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Harman-kardon speakers

Is it possible to use my harman-kardon speakers with my new HP monitor? The speakers do not have USB connectors,and, i cannot plug them into the tower. (They plugged into previous monitor.) Is there some sort of adapter I can purchase? Simplistic question, but major headache.

While it may not be all that helpful, I had some issues with an Altec lansing speaker set on my G5, where background noise was abnormally high almost all the time, and from time to time there would be rushing noises which grew very loud. It turned out to be a faulty USB hub, even though the speakers were not USB connected.
To troubleshoot your system, I would disconnect everything external bar the basic essentials, including any hubs or other devices, even the keyboard and mouse, and test the system that way. It would not be expected for software or MacOS itself to cause the sort of effects you describe.

Need to buy Satellite X200/X205 harman-kardon speakers

Anyone knows where i can find to buy the TOSHIBA X200 or X205 harman-kardon speakers (left+right+subwoofer)?
And the black cover too... (without the 7 butons board)
Please, help

Hi
All the compatible notebook parts can be purchased from the ASP in your country. I would recommend to contact the guys and to ask for such speakers.
The Toshiba global ASP database can be found here;
http://eu.computers.toshiba-europe.com/ -> Support & Download -> Find an Authorized Service Provider
Bye

Harman Kardon drive and play

I have a harman kardon drive and play fitted to my car that works fine with all my older apple stuff. I am now in possession of later generation apple iPhone and iPod touch with a different plug. I have purchased an adaptor to interface the old type plug with a new plug, but it does not work with the harman kardon The adaptor works when i use through the computer via an old apple cable and an iPhone 5 with the later type plug.
Any ideas how i could interface my new iPod touch through the HK Drive and play?

Does anyone know if the Harman Kardon Drive and Play unit will work with the Iphone 3G.
It does. Click here for more information.
(36236)

Macbook pro won't turn, and make loud noises

When I was watching a video on my 15inch macbook pro, the screen suddenly turned black and made the click sound that is usually only present in forced shut down.
I then press the power button once, and nothing happened except for another "click" sound as I pressed the power button.
I tried pressing the power button again, and again, the same thing just kept on happening.
Then I pressed the power button down and held it for 5-10 seconds and heard multiple click sounds. After that, my macbook pro successfully turned on.
However, the noise (supposedly from the cooling fans?) kept getting louder and louder. My macbook pro now functions rather normally, but the noise would never go away, which worries me a lot.
Also, I turned it off and tried turning it on again. The same thing happened. I could not turn it on by pressing it once; all i heard was the click sounds. I could only turn it on by holding the power button for more than 5 seconds (also hearing the click sounds multiple times and the loud noise)
Is there something seriously wrong wtih my macbook pro?
and can I make it so I can turn it on normally and not hear the loud noises?
thanks

You can try running the Apple Hardware Test by booting holding the D key down.
http://support.apple.com/kb/ht1509

This morning my PB G4 would not get to the password screen after power on. I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage E

this morning my PB G4 would not get to the password screen after power on. I have rebooted many times and very loud noises (like a HD spinning/rubbing) emits. Tried the Install disk and it cannot find the hard drive. Ran HW test and got a "Mass storage Error Code" message.
Did my HD just crash and unrecoverable? Time to replace my notebook?

I believe your hard drive has failed. Hope you have a backup.
Failing Hard Drive Sounds http://datacent.com/hard_drive_sounds.php
Listed by drive manufacturer. Click on the > next to the drive & you will hear the typical failure sound.
How to Tell When Your Hard Drive is Going to Fail
http://www.lifehack.org/articles/technology/how-to-tell-when-your-hard-drive-is- going-to-fail.html
Grinding And Clicking – Symptoms Of A Failing Hard Drive
http://pcperformancetools.com/getdata/grinding-and-clicking-symptoms-of-failing- hard-drive.html
Failing Hard Drives
http://losangelescomputerhelp.com/computer_networking_news/failing-hard-drives.h tml
 Cheers, Tom

Does anyone know of a mini sterio with surround sound and optical input in Mac Mini form factor?

Does anyone know of a mini sterio with surround sound and optical input in Mac Mini form factor?
I use a Mini as the family media center and would like to have 5.1 or 7.1 sound for films but don't want a huge piece of eletronic equipment (I have one of those, but it isn't hooked up because it doesn't fit on the bookshelf). Years ago I used a PC and still use the Creative Audigy speaker system (Jimmy rigged to the Mini) that I ran from the PC. The Audigy PCI sound card obviously doesn't work on the Mini, so I just have two chanel plus sub. That has been fine since I switched to the Mini in 2007, but am updating to a new Mini in the summer and would like to upgrade my sound as well.
I also wouldn't be opposed to a USB soundcard that can drive the speakers. In fact, my wife would prefer smaller and less visible, ergo USB card hidden in the back.
Suggestions?

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

No signal to VGA monitor using Mac mini display to VGA adaptor and first time boot Mac mini

Just unpacked Mac mini and powered up using Mac mini to VGA display adaptor and VGA monitor. There is no signal to the monitor ( power is on).
How to see the display?

[ 13.093] (==) No Layout section. Using the first Screen section.
[ 13.093] (==) No screen section available. Using defaults.
[ 13.093] (**) |-->Screen "Default Screen Section" (0)
[ 13.093] (**) | |-->Monitor "<default monitor>"
[ 13.093] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
First step would be to create the necessary entries (easier to make a complete xorg.conf versus xorg.conf.d/##-whatever.conf).
All Desktop Environments / Window Managers rely on X. Man pages are helpful, possibly some headaches ahead as I fought a dual-monitor display this way.
I currently run a xrandr script to switch displays on my hp pavilion: https://wiki.archlinux.org/index.php/Xrandr#Scripts
Check it out.

How can I have the same environment on two macs on is a macbook pro and the other a Mac mini

How can I have the same environment on two macs on is a macbook pro and the other a Mac mini ?

Forget trying to use iCloud for this - it won't do what you want. iCloud syncs certain data like contacts and events, but it doesn't sync "environments" on computers.

Can I use my apple wireless mouse and keyboard with my Mac Mini and Windows PC?

Hello, I recently dug up a windows PC computer for side projects, and I was able to get by using my wireless apple keyboard and mouse for my Mac mini, and then using a usb mouse for my PC, I want to eliminate the usb keyboard and mouse and just use the bluetooth keyboard. Both computers are usually on all the time, and the windows PC uses a bluetooth adapter. I can get my keyboard and mouse to work on both, but I have to sync them to whatever system I would like everytime I want to use it. Is there any solution that when I choose the Mac Mini my keyboard and mouse will work for the Mac mini, and when I choose my windows pc, the keyboard will only be used on windows without having to resync?

To my knowledge, no.
Barry

The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse. HELP!!! Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.

The programs open tab ( list of programs open on comp) is always popping up on middle of screen whenever I go near the mouse. HELP!!! Have turned it off recently and moved it, a mac mini, now on new plug in and set up it now does it.
Yes I have turned it off and restarted it, ubnplugged mouse and plugged it back in.
Have not updated it in a little bit
running mavericks, which I dislike.10.9.1
This is a new problem,
Why where and what do I need to do to fix it? Please.
Thanks for your help community, You guys are awesome, better than the guys n girls at Apple!!
I have also noticed the drop down menu arrow on Numbers Tabs has dissappeared since move.
you know the invisible arrow that appears in the additional tabs pages in "Numbers program"
Especially an inconvenient for previous Numbers users as you all know.
any word on New Numbers Tutes at all??
You'd think with a Billion dollars they could make a 10 min clip saying here are changes guys, go enjoy new layout..... Just saying... not.
anyway Hi and any help out there tonight is GREATLY APPRECIATED.
Cheers Jason.

If the reset doesn't work:
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

I have a mid 2011 27 inch iMac and a late 2012 mac mini. I am using the 27 inch iMac as the display for the mac mini with a thunderbolt cable. I was trying to use bootcamp on the mini but after I started downloading windows I can't get it to display on the iMac.

Hi there,
The simplest way is to drag it across wirelessly using the 'Airdrop' application once both computers are near one another. 'Airdrop' can be found near the top, on the left hand side menu, within 'Finder'.
AJ

I have a late 2012 iMac and a late 2009 mac mini. I want to know if I can take the 8 GB of ram from the iMac and install it in my mac mini.

I have a late 2012 iMac and a late 2009 mac mini. I want to know if I can take the 8 GB of ram from the iMac and install it in my mac mini.
According to Cruicial my mac mini could use:
Module Size: 8GB Kit (4GBx2)
Package: 204-pin SODIMM
Feature: DDR3 PC3-8500
Specs: DDR3 PC3-8500 • CL=7 • Unbuffered • NON-ECC • DDR3-1066 • 1.35V • 512Meg x 64
Also According to Cruical my iMac uses:
Module Size: 8GB Kit (4GBx2)
Package: 204-pin SODIMM
Feature: DDR3 PC3-12800
Specs: DDR3 PC3-12800 • CL=11 • Unbuffered • NON-ECC • DDR3-1600 • 1.35V
I want to increase the ram in both computers.
So, can I put the iMac ram in my mac mini and then I'd only have to buy ram for my iMac? Naturally the ulitmate test will be when I actually install it, but having an expectation of success or failure will allow me to plan on what to spend money on.
Thanks,
Bear

Thanks for the responses. I probably wont even try as my priority is Ram for the mac mini. 2 is not enough. 8 for my imac is okay for now.
Somewhere I thought I'd heard that faster Ram would simply clock at the lower speed. It seems that I am incorrect.
Thanks,
Bear

I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

I'm new to Mac and I have a Mac Mini. Could you please tell me how I could paste an URL to a video downloader like "Coolmuster Video Downloader for Mac"? I can copy the url but I could not paste it on the downloader. I appreciate your help to my problem.

Is this happing because the external is formatted to PC and not mac?
Yes that is correct.
Will I need to get a mac external hard drive if I wish to continue to save my documents like this?
If you no longer use a PC you could format this drive for the Mac. However be aware that formatting a drive will erase all the data on it. So you would need someplace to copy the data off this drive to while you did the re-format and then you could copy the data back.
You could get another drive, format it for the Mac and copy the data to it. Then re-format the original drive and use it as a backup drive. Always good to have backups.
Post back with the drive type and size of the current drive, if you are doing backups now and how and if you still need to access this drive from a PC.
regards

Harman-kardon speakers and various loud noises( mac mini)

Similar Messages

Maybe you are looking for