Harris Nexio LXF Export in Final Cut X?

I have a Nexio LXF export plug in for Final Cut 7 that allows me to export files for playback on our Harris broadcast servers. Is there a way to use that same plug in in Final Cut X? It shows up under export in my FCP 7 menu but it does nor appear undar "share" in Final Cut X. Thanks for any help.

Hi Bradley,
Where do you download the plugin?
I tried googling and searching the Harris site but can not find it.  I can only find the .pdf at http://harrisbroadcast.com/docs/default-source/data-sheet/nexio-lxf-export.pdf?s fvrsn=8
I need to export to .lxf and can try to help you troubleshoot.
Thanks.
-Jeff

Similar Messages

  • Best video format to export from final cut pro to encore

    hi, i'm using final cut pro and no matter what format i export my video in, be it quicktime, mpeg2 or avi, there's still a slight degradation of picture quality when i import it into encore. mpeg2 by far suffers the least. but is there a best video format i can export from final cut to adobe so dat there's minimal loss in quality?

    Sure, export it as an uncompressed AVI or QT file.

  • Can files be exported from Final Cut Pro X trial?

    Can files be exported from Final Cut Pro X trial?

    It doesn't seem to work on mine, when I go to command: the export button is in grey, whereas all the others (import; customize) are black and can be actionned. Is this a restriction in the trial version or is there a way to activate export?
    Thanks

  • Exporting from Final Cut Pro

    Hi I have shot a show that ran for 2 hours. I have edited and now just need to know how I should export it and what format so it can fit on a dvd. I will be using iDVD 5 for the menus, and I am under the impression iDVD 5 doesnt support mpeg 2 files. So i need another way to export from Final Cut and then put it in iDVD 5 then onto a dvd.

    I'm afraid I've mis-stated some information, and I apologize.
    First, you would need to select 'best QUALITY' for anything over 60 minutes.
    Generally iDVD5 should successfully create a 90 minute DVD. It is supposed to be able to create up to 2hours of content, but that would include all media creation items, including movie file(s), motion menus, drop zones, music...etc.
    I had come across a link that discussed creating longer DVDs in iDVD, but it works with iMovie and is not totally relevant to this forum.
    Again I apologize, but if it interests you, here is the link...
    http://lonestar.utsa.edu/llee/idvd.html
    K
    EDIT - I might add that The Capt. and Mr. Hofmann would certainly be the words of wisdom I'd choose to go with if I were you.

  • How to Free up Disk Space to export from  Final Cut Pro to QuickTime?

    I am using Final Cut Pro on a Mac OX10. When I try to export a Final Cut Pro project to QuickTime I get a message saying that I do not have enough disk space available. How do I free up additional disk space? (I am a little confused because I have already deleted more disk space than I am current trying to use)
    Powerbook G4   Mac OS X (10.4.7)  
      Mac OS X (10.4.7)  
      Mac OS X (10.4.7)  

    Might try restarting the computer, just to refresh the system's memory... be sure you empty the trash too... the new space won't show up until you do.
    Jerry

  • Audio out of synch after I export from Final Cut

    I have a video on a Final Cut timeline. If I play in FC, audio is in synch. If I play the file in QuickTime player from my captures folder, the audio is in synch. If I export from final cut, or from quicktime pro, the audio of the resulting file is off by about 1 second. I was trying to make a h.264 file, but it does the same thing if I export to other formats as well.
    This only seems to be happening with this particular video. I have a number of project loaded right now, and do not have this same problem with the other projects.
    Weird....any help would be greatly appreciated.

    You didn't include any of your specifications for the sequences or exported movies but a problem that only exists on a single item is directly associated with that item and can be identified but they're usually subtle.
    My first guess is that the audio on the original media is set to a slight different sampling rate. Could be off a thousandth of a decimal. The reason it works in the timeline is it's being conformed to the sequence settings in realtime. The export would reference the original.
    I can't tell from the post where you're getting this loss of sync. Can you try exporting a self-contained movie and then use that to go to h.264?
    bogiesan

  • Export FROM Final Cut w/ alpha?

    Is there a way to export from Final Cut and sustain the 'alpha'. For example, I'm exporting the video layer from an infomercial offer screen and will bring it into AE.
    I don't think there's a way but I just wanted to throw it out there in case there's a new trick someone knows.
    Thanks...and don't give me any AE tips...just wanted to know the alpha thing,
    Tom

    you can also use any of the Avid QT codec's as an intermediate (their codecs are freely available available for download from their website and they all support alpha ... even AvidDV)
    or there is BitJazz's Sheer codec (commercial) ... or if you can wait then there's Red Giant's Microcosm codec (soon to be a free release)
    also check this list here:
    http://www.digitalrebellion.com/blog/posts/listof_video_formats_supporting_alphachannels.html

  • Is there a way to export from final cut X to XDCam discs?

    Hello,
    I need to export from Final Cut Pro X to a XDCam  disc.
    Does anyone knows how this can be done?
    Thamks
    Miguel

    Just forgot to mention that I would like to do this with a camcorder (Sony PDW-530P) connected by firewire.
    Many thanks
    Miguel

  • Best high quality format to export from final cut for DVD

    What is the best format to export in final cut to put onto a DVD?
    Mostly its footage from VHS so it doesnt have to be awesome but need some tips
    cheers

    You can't get any better than what your Sequence settings were in FCP. Export a self-contained or reference movie (File->Export->QuickTime Movie) from FCP. Do NOT recompress all frames, but do include DVD-SP markers (if any).
    Bring the resulting file into Compressor and choose the appropriate DVD preset. You can duplicate, then modify a preset if needed.
    You'll have two files from Compressor: an MPEG-2 video file (.m2v) and a Dolby Digital audio file (.ac3).
    Import those two files into DVD-SP for authoring and burning.
    -DH

  • FLV Export From Final Cut Pro

    Hi Folks,
    I've been reading and reading and just want to know what is
    the right way to go about exporting video from a third party
    application like Final Cut Pro. Yes, the easy way is to
    Export>quicktime conversion and go from there. If this is the
    best way then great, But i'm wondering if exporting as a lossless
    quicktime codec such as the Video codec or the Anitmation codec
    would be a better choice then go to the flash video encoder with
    the lossless file. I heard that exporting straight out of FCP could
    be bad as the video needs to be deinterlaced before the flv stage.
    If this is the case, what are the best settings when
    exporting a lossless quicktime file? There are about 6 setting s
    that need to be set and I haven't a clue what would be the right
    settings.
    If exporting from final cut straight to flv, are you folks
    dropping the frame rate to 15 fps(cutting your frames in half). Is
    this working better for you?
    Well thanks for all your help, I keep on testing short clips
    and can't seem to find a any certain configuration that i really
    like.
    hanks so much for all your help.
    todd

    Todd ..
    We do quite a bit of video / flv work.
    Our editing software is VEGAS so unfortunately we can't
    render directly to flv .. but avi->flv via Sorenson Squeeze.
    If Final Cut allows rendering directly to flv, my
    recommedation would be to use that functionallity. Caveats .. if
    the encoder can 1. deinterlace i.e. progressive scan. 2. reduce
    your framerate from 29. to 15. 3. gives you the ability to control
    # of key frames.
    The logic being .. use the fewest number of encoding methods
    to get from source to output to maintain best quality.

  • How i do Export project final cut pro to edius

    how i do Export project final cut pro to edius

    The other option is to get Xto7, which may be much easier than Resolve and faster.
    https://itunes.apple.com/us/app/xto7-for-final-cut-pro/id487899517?mt=12
    But I don't know if Edius reads XML files.
    If you need EDL files, DaVinci Resolve LITE (free) is the way to go.

  • Best way for exporting a final cut file

    Hi, I'm exporting a final cut project so i can use it in dvd studio pro 4. But it's over two hours. does anybody know the best way to compress it?

    Your post isn't clear.
    Are you exporting it through compressor to mpeg2/m2v or are you exporting a self contained movie to be encoded in Compressor?
    There's a different.
    If self contained, use the current settings default.
    In any case, clarify what you are doing.

  • Why do I keep getting a Video rendering error: 10008 when exporting in Final Cut Pro X?

    Why do I keep getting a Video rendering error: 10008 when exporting in Final Cut Pro X?
    I'm using FCPX 10.2
    Yosemite 10.10.3
    MacBook Pro (13-inch, Early 2011)
    2.7 GHz Intel Core i7
    8 GB 1333 MHz DDR3
    500GB with 308GB free

    It appears Apple's latest update has solved the issue. Whew!
    MacBook Pro (13-inch, Early 2011)
    2.7 GHz Intel Core i7
    8 GB 1333 MHz DDR3
    500GB with 308GB free
    Yosemite 10.10.3
    FCPX 10.2

  • Export a Final Cut Pro XML file problem about translation issue

    When I export the final cut pro xml file, there is always translation issue like that 'Transition <....> not translated, Cross Dissolve used instead.'
    Most of the transition type can cause the translation issues except the wipe and cross dissolve.
    Is there any body knowing the reason? Is that OK?
    By the way , I am using the trial version of cs5

    Hey Ani_,
    I've been working with Adobe products for a long time and typically when you come across an error that has anything to do with a XML file export problem its due to things such as effects you may have added in, color corrections, cross fades or any type of video transitions between clips. Remember your work flow should be
    Import your footage into Premiere Pro
    Name your clips (helps find things later on)
    Place clips on time line in the order you wish (ONLY MAKE CUTS don't add anything, transitions color effects nothing)
    Then once your clips are all placed on the timeline in your correct order you then EXPORT> Final Cut Pro XML
    Now you can bring this into other programs for color grading or whatever else your going to do.  You will notice you have no errors on the export.
    Once your done doing what your doing to the clips in another program (for example: Divinci Resolve color grading) you can then export them back to your main project then add your effects and transitions.

  • Tried to export my Final Cut Pro and I get an error; QuickTime Error: -50.

    I am trying to export my Final Cut Pro project and when it is exporting, about 20mins later, it gives me an error.  How can i fix the problem.
    Error code: QuickTime Error: -50

    Try deleting preferences (use Preference Manager, a free application).
    Also, you may try copying everything in your timeline and pasting into a new project. See if that exports correctly.

Maybe you are looking for

  • Incoming messages going to wrong folder

    I have no rules set for mail and I have messages that should be in my inbox automatically showing up in another folder. I think I previously had a rule set but have deleted all of my rules and the problem persists. Does anyone know of other settings

  • Adding 'FIND' functionality in toolbar of ALV Web Dynpro ABAP

    Hi Friends, I need to know whether we can add FIND functionality in toolbar of ALV display. If yes than which class will help in that, or do i need to code it. Pls help on this. Regards, Saud

  • Music Video artists appearing under Music on iPod

    I have music videos on my iPod that display just fine, and they sort just fine, but the artists that are attributed with the videos are appearing under the Music > Artists section. This is either causing duplicate entries that lead to the same list o

  • HTML:Select

    Hi, I am having a list of names from DB which I should show in the muliselect box. I have a form bean which has a String array with the names to be shown. I have written like this...but dont know if im correct <html:select name="nameForm" property="n

  • G/L Accounts Balance by days

    Hello, can anybody help how to display account balance by days? Is there any report? thanks D.