Harsh fonts in Opera Menus with Fluxbox

Using Opera 10.10 with Fluxbox 1.1. Fonts in actual web pages are nice but the Opera menu fonts are very harsh, bright, don't appear to be antialiased and clash with other fonts. This is not the case with Firefox. Here is a screenshot:
http://img39.imageshack.us/img39/7639/operafonts.jpg
I have tried "opera:config" changes to XFT fonts and other changes- to no effect. I have ensured the hsync and vertfresh for my monitor is correc t and I have used nvidia-settings to ensure antialiasing is on. Any suggestions greatly appreciated.
I previously did not have this problem when using Gnome, but I removed Gnome as I am now using an older, slower computer, and besides, I prefer fluxbox...
Larry

eljoeb wrote:Isn't qt config for gnome? While I have it on my computer, I swear it came when I used gnome. I'm using kde right now.
GNOME is built on the GTK2 toolkit; KDE on QT, so, no. QT is a KDE thing.

Similar Messages

Safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4, apple engineers have tried multiple things including operating system with no success

safari, chrome and firefox cannot verify identity of secure websites after upgrading to 10.7.4, apple engineers have tried multiple things including operating system with no success

There are several threads about this problem, most notably one called 'Invalid Certificates' is over 4 pages long. Many of us have experienced difficulty connecting to banking and other secure sites. On my Macbook Pro, I cannot get to my banking site with any browser, however I can get there on my iMac using Safari, but get the 'Invalid Certificate' notice with FF and Chrome. The problem started after the installation of 10.7.4. I have sent a message to Apple--they will be dismayed to hear that I cannot complete an order at their online store!

HT1923 I have a Vista Operating system with 2 users. Somehow I got two different play lists each with one user. One is too big for the storage and has a vast amount of duplicates. Can I delete the one that is twice as large and then access the other li

I have a Vista operating system with 2 users. Somehow I got two diffent libraries for the users. How can I delete the one and then access the correct library on the other users profile?

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Error when deploying EAR file: Operation failed with error: java:/app/jdbc/

I created application using JDeveloper 11g, and have the deploy file EAR read to deploy to oracle application server 10g, but I am encouting the error of Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
Below is the log. What did i do wrong? I have created the datasource of HRConnDS, and it shows in EM.
Nov 6, 2009 10:06:12 AM] Application Deployer for hra1 STARTS.
[Nov 6, 2009 10:06:12 AM] Copy the archive to /u01/OraHome_app1/j2ee/home/applications/hra1.ear
[Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear begins...
[Nov 6, 2009 10:06:12 AM] Unpacking hra1.ear
[Nov 6, 2009 10:06:12 AM] Done unpacking hra1.ear
[Nov 6, 2009 10:06:12 AM] Unpacking webapp2.war
[Nov 6, 2009 10:06:12 AM] Done unpacking webapp2.war
[Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear ends...
[Nov 6, 2009 10:06:12 AM] Starting application : hra1
[Nov 6, 2009 10:06:12 AM] Initializing ClassLoader(s)
[Nov 6, 2009 10:06:12 AM] Initializing EJB container
[Nov 6, 2009 10:06:12 AM] Loading connector(s)
[Nov 6, 2009 10:06:12 AM] Starting up resource adapters
[Nov 6, 2009 10:06:12 AM] application : hra1 is in failed state
[Nov 6, 2009 10:06:12 AM] Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
Thank you very much for your help.

How did you create your datasource, can you post the content, without passwords of course.
Greetings.

On a Mac, can you navigate menus with one handed key strokes like Windows?

On a Mac, is there anyway to navigate menus with one handed keyboard strokes like you can in Windows? My girlfriend is a graphic designer and switched from Windows to Mac. She misses being able to use the Alt key and make menu selections. On Windows she can press "Alt" and then move through menus and submenus with one hand on the keyboard. When you press "Alt" the first letter of every menu is highlighted. When she presses a certain letter the menu drops down, and the first letter of every submenu is then highlighted. She can then navigate through all the submenus until she hits the selection she wants, all using the left hand on the keyboard. It's very fast and efficient. Can you do something similar to this on a Mac?
The reason she wants to do this is because when she is in Photoshop, she likes to use her right hand on the mouse with the cursor inside the canvas (sketching, moving layers around) while she makes menu commands with the left hand. It is 10 times faster this way than using the mouse for everything. Hot keys are not the same because you must have those memorized. With the "Alt" key function, you can open a drop down menu, see the choices, and make your selection.
I have been a Mac person my whole life, and I have to say, it's a pretty awesome function. I really want the Mac to have something similar.

Barney-15E wrote:
[Actual studies|http://www.asktog.com/TOI/toi06KeyboardVMouse1.html] have found it is faster to use the mouse to make command activations than using keyboard shortcuts.
The 20-year-old argument on that web page isn't very convincing. Keyboard shortcuts are certainly faster for experience power users who do the same thing every day. The mouse is faster only for new users or users doing non-repetitive commands every day.
It is interesting that one of the posts on that page said this:
I remember one mainframe company in the sixties that came up with the following command-key guidelines:
Use the first letter of the command word
If the first letter is already used, use the last letter
If the last letter is already used, use the second letter
If the second letter is already used, use the second-to-the-last letter
etc.
This is actually very similar to how the keyboard-driven menus work in Mac OS X. The advantage over the Windows method is that when there is more than one command in a menu that shares the same first letter, you do not have to memorize which command uses which letter. You just type ahead until the correct command is selected.
I would, however, encourage Derek Doublin1's girlfriend to learn the direct keyboard shortcuts in Photoshop. On Mac or PC, for me pressing Command-Option-I is much faster than either the mouse or using the keyboard to drop the Image menu and walk down to the Image Size command.

How do I make interactive DVD/Blu-Ray menus with motion?

So, adobe doesn't support Encore anymore which means I can't use dynamic link to AE to create interactive DVD/Blu-Ray menus with motion.... or can I? Is there something I'm doing wrong? While in Encore, I go to dynamic link and boom, dynamic link to AE is not highlighted. If I can't make an interactive menu with motion using adobe, then what can I use? This is causing a major problem for me and my clients. (if i over looked the answer to this in another post, my apologies)

You can use the "Create After Effects Composition." This prompts you to create an independent version of the Encore PSD menu file, and opens the layered file in AE CC and creates a new composition with appropriate settings. AE no longer has mpeg export, so you export from AE to AME.
There were some workflow options that I did not play with much, but they were never what I saw as the basics for using AE to create the motion background.
You need to understand these two help pages:
Adobe Encore * Menu timing and looping
http://help.adobe.com/en_US/encore/cs/using/WSF49EA5DB-3743-49c2-9831-F66328B192F8.html
Adobe Encore * Using After Effects to enhance menus
http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html
I'm not sure what you mean by "interactive" unless you just mean creating navigation.

I am trying to find an old mac font. It's the techno (apple) font that was available with OS 9. How can I get this font?

I am trying to find an old mac font. It's the techno (apple) font that was available with OS 9. How can I get this font?

I think that was Tecno. Techno appears to be a whole class of fonts.
Is this the one? http://www.dafont.com/tecno.font
That's a .ttf version which should work OK with current OS.
As an aside, I was searching for Apple Textile for quite some time when it was pointed out to me that it was used by iDVD. Sure enough, opened up the installer package for iDVD with Pacifist and there it was. Now working fine on all my Macs!

[DC2] An net use or LsaPolicy operation failed with error 67 - Moving AD from 2003R2 to Server 2012

Hello, i hope someone can help me with this tricky situation.
The plan is to move AD from 2003R2 name "DC" to a server 2012 "DC2"
I have made all the adjustments and transferred all the role to the new 2012 server, and both are now GC servers.
The problem is "transferring" the netlogon share.
in DCDIAg on the new server i get:
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = DC2
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\DC2
Starting test: Connectivity
......................... DC2 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\DC2
Starting test: Advertising
......................... DC2 passed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... DC2 passed test FrsEvent
Starting test: DFSREvent
......................... DC2 passed test DFSREvent
Starting test: SysVolCheck
......................... DC2 passed test SysVolCheck
Starting test: KccEvent
......................... DC2 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... DC2 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... DC2 passed test MachineAccount
Starting test: NCSecDesc
......................... DC2 passed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\DC2\netlogon)
[DC2] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... DC2 failed test NetLogons
Starting test: ObjectsReplicated
......................... DC2 passed test ObjectsReplicated
Starting test: Replications
......................... DC2 passed test Replications
Starting test: RidManager
......................... DC2 passed test RidManager
Starting test: Services
NtFrs Service is stopped on [DC2]
......................... DC2 failed test Services
Starting test: SystemLog
......................... DC2 passed test SystemLog
Starting test: VerifyReferences
......................... DC2 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : dom1
Starting test: CheckSDRefDom
......................... domain passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... domain passed test CrossRefValidation
Running enterprise tests on : domain.xxxxx.no
Starting test: LocatorCheck
......................... domain.xxxxx.no passed test LocatorCheck
Starting test: Intersite
......................... domain.xxxx.no passed test Intersite
I have as a last option the burflags issue, i tried this with the option D2, but i think i have done it wrong, because the netlogon share is gone on the old DC. i took a backup of the files and folders before
i did this. http://support.microsoft.com/kb/290762/en-us But i am a little confused on which server i am going to set the D4 value on now? COuld someone help? Best regards Aksel

Hello Dirk
And thank you for your answer, in regards of the KB, do i have to follow the steps regarding:
Global vs. replica set specific reinitialization
You can locate the replica set specific
BurFlags
registry key by determining the GUID for the replica set that you want to configure. To determine which GUID
corresponds to which replica set and configure a restore, follow these steps:
Click Start, and then click Run.
In the Open box, type cmd and then press ENTER.
In the Command box, type net stop ntfrs.
Click Start, and then click Run.
In the Open box, type regedit and then press ENTER.
To determine the GUID that represents the replica set that you want to configure, follow these steps:
Locate the following key in the registry:
KEY_LOCAL_MACHINE\System\CurrentControlSet\Services\NtFrs\Parameters\Replica Sets
Below the Replica Sets subkey, there are one or more subkeys that are identified by a GUID. In the left pane, click the GUID, and then in the right
pane note the Data that is listed for the Replica Set Root value. This file system path will indicate which replica set is represented by this GUID.
Repeat step 4 for each GUID that is listed below the Replica Sets
And so on?
I have only thos 2 DC's in the network...

Use Unchecked or unsafe operations: recompile with -Xlint

hi all..
I'm trying to create a GUI to select the necessary port to open. I got this code from JAVA cookbook:
I'm using windows XP and JDK 1.6..
import java.io.*;
import javax.comm.*;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import javax.swing.*;
public class PortChooser extends JDialog implements ItemListener {
HashMap map = new HashMap();
String selectedPortName;
CommPortIdentifier selectedPortIdentifier;
JComboBox serialPortsChoice;
JComboBox parallelPortsChoice;
JComboBox other;
SerialPort ttya;
JLabel choice;
protected final int PAD = 5;
public void itemStateChanged(ItemEvent e) {
selectedPortName = (String)((JComboBox)e.getSource()).getSelectedItem();
selectedPortIdentifier = (CommPortIdentifier)map.get(selectedPortName);
choice.setText(selectedPortName);
public String getSelectedName() {
return selectedPortName;
public CommPortIdentifier getSelectedIdentifier() {
return selectedPortIdentifier;
public static void main(String[] ap) {
PortChooser c = new PortChooser(null);
c.setVisible(true);// blocking wait
System.out.println("You chose " + c.getSelectedName() +" (known by " + c.getSelectedIdentifier() + ").");
System.exit(0);
public PortChooser(JFrame parent) {
super(parent, "Port Chooser", true);
makeGUI();
populate();
finishGUI();
protected void makeGUI() {
Container cp = getContentPane();
JPanel centerPanel = new JPanel();
cp.add(BorderLayout.CENTER, centerPanel);
centerPanel.setLayout(new GridLayout(0,2, PAD, PAD));
centerPanel.add(new JLabel("Serial Ports", JLabel.RIGHT));
serialPortsChoice = new JComboBox();
centerPanel.add(serialPortsChoice);
serialPortsChoice.setEnabled(false);
centerPanel.add(new JLabel("Parallel Ports", JLabel.RIGHT));
parallelPortsChoice = new JComboBox();
centerPanel.add(parallelPortsChoice);
parallelPortsChoice.setEnabled(false);
centerPanel.add(new JLabel("Unknown Ports", JLabel.RIGHT));
other = new JComboBox();
centerPanel.add(other);
other.setEnabled(false);
centerPanel.add(new JLabel("Your choice:", JLabel.RIGHT));
centerPanel.add(choice = new JLabel());
JButton okButton;
cp.add(BorderLayout.SOUTH, okButton = new JButton("OK"));
okButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
PortChooser.this.dispose();
/** Populate the ComboBoxes by asking the Java Communications API
* what ports it has. Since the initial information comes from
* a Properties file, it may not exactly reflect your hardware.
protected void populate() {
Enumeration pList = CommPortIdentifier.getPortIdentifiers();
while (pList.hasMoreElements()) {
CommPortIdentifier cpi = (CommPortIdentifier)pList.nextElement();
// System.out.println("Port " + cpi.getName());
map.put(cpi.getName(), cpi);
if (cpi.getPortType() == CommPortIdentifier.PORT_SERIAL) {
serialPortsChoice.setEnabled(true);
serialPortsChoice.addItem(cpi.getName());
else if (cpi.getPortType() == CommPortIdentifier.PORT_PARALLEL) {
parallelPortsChoice.setEnabled(true);
parallelPortsChoice.addItem(cpi.getName());
else {
other.setEnabled(true);
other.addItem(cpi.getName());
serialPortsChoice.setSelectedIndex(-1);
parallelPortsChoice.setSelectedIndex(-1);
protected void finishGUI() {
serialPortsChoice.addItemListener(this);
parallelPortsChoice.addItemListener(this);
other.addItemListener(this);
pack();
//addWindowListener(new WindowCloser(this, true));
}}When i compile this it says PortChooser.java uses unchecked or unsafe operation
recompile with -Xlint(any one know what this is?)
Is it the JDK version i'm using ? First i thought it's a security issue.As in windows is not letting me access the serial ports.
I checked with device manager.My serial ports are open. Ichanged my BIOS settings as well..
(I read inputs from parallel port.But i dont use the comm api for that)
I have installed the rxtx gnu.io package as well..
Tried import gnu.io.* instead of javax.comm.*; still the same compilatiion error!!!
Thanks in advance
goodnews:-(

It is basically a warning (not an error) that the compiler gives you to let you know that you are using a raw type where Java now supports generic types.
For example, in the code you use:
HashMap where you can use HashMap<String,String> to let the compiler know that you intend inserting Strings for both the key and the value. The former is considered to be unsafe because the compiler cannot control what is inserted into the HashMap while in the latter case it can ensure that only Strings are used for both keys and values.
The compiler is also letting you know that if you want to see the details of these "unsafe" operations you can use the -Xlint:unchecked option when compiling and the compiler will show you exactly which lines contain the code that is generating the warning. So to compile with this option you would use javac -Xlint:unchecked ClassToCompile.

No way to publish a workflow, I get this error: System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope ... is not in an active state. Its current state is 'Unregistering'

Hi,
I'm using Project Server 2013 and I'm not able to publish a workflow in SharePoint Designer 2013, I get this error:
System.InvalidOperationException: Operation failed with error Microsoft.Workflow.Client.ScopeInactiveException: Scope '/SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777' is not in an active state. Its current
state is 'Unregistering'. HTTP headers received from the server - ActivityId: c47ef567-8c54-4ae0-9a1a-1e4fb51320d8. NodeId: TestServer. Scope: /SharePoint/default/d7feb9ea-ccb2-4ec3-8f89-2a45b6cf3777. Client ActivityId : c6e5979c-20f8-e042-1f9d-2cb2a25d7f9e.
---> System.Net.WebExceptio
The thing is that I transferred the databases from a Prod.Env. to the Test Env. and from that moment on the Test Env. stopped working (only workflows), then I
was thinking that maybe the workflow is not working in the Test Environment because when I transferred the databases from Prod Env to Test Env I didn’t transfer the databases related to workflow, I only transferred:
WSS_Content
PWA_ServiceDB
But I didn’t transfer:
SBGatewayDatabase
SBManagementDB
SBMessageContainer01
WFInstanceManagementDB
WFManagementDB
WFResourceManagementDB
I didn’t transfer them because, before, when I transferred DB’s in version 2010, these DB’s were not needed, as the workflows were done using another method.
So, I tried to create a new workflow in the Test Env. but there is no way, I always get that error.
I've tried to Register again the workflow, and the result looks ok, but it doesn't solve the problem:
Register-SPWorkflowService
–SPSite "http://whatever/PWA"
–WorkflowHostUri "http://TestServer:12291"
–AllowOAuthHttp -Force
Do you know how to solve this issue or have an idea to give me some light?
Thank you for your help and regards,
José Espases

Looks like you haven't defined the WF scope or the site where you are trying to deploy the workflow to isn't included in the scope
Check this article
http://fangdahai.blogspot.in/2013/04/on-premise-windows-workflow-server.html
Thanks | epmXperts | http://epmxperts.wordpress.com

The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the error 0x80042316

When using Microsoft Backup on a Windows Server 2008 SP2 (not R2 - [Microsoft version 6.0.6002]) I get the error "The creation of the shadow copy on the backup destination has failed. Detailed Error: The Volume Shadow Copy operation failed with the
error 0x80042316"
The odd thing is that when I start the backup manually, it works fine. When it runs automatically the error appears.
When doing a SFC /scannow I do get errors that can't be corrected.
Is there anything short of rebuilding this machine (It's a DC and the only one this office has) I can do to fix this?

Hi,
0x80042316 means "Another shadow copy creation is already in progress". This error could occur when another VSS instance is running.
Is there any third party backup application installed? Try to uninstall it to see the result. And please also check if there is another backup schedule which causes the conflict.
Meanwhile please provide the result of:
vssadmin list providers
vssadmin list writers
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].
Hi,
I do have Crashplan ProE running. It started at 1900 and the Windows Backup starts at 2000. I have modified Crashplan not to start until 2300 to see if that helps.
Also:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Provider name: 'Microsoft Software Shadow Copy provider 1.0'
Provider type: System
Provider Id: {b5946137-7b9f-4925-af80-51abd60b20d5}
Version: 1.0.0.7
AND:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2005 Microsoft Corp.
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {f0c7ee55-5885-4894-8dd3-14fffbdd4d2e}
State: [1] Stable
Last error: No error
Writer name: 'SqlServerWriter'
Writer Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Instance Id: {017a0133-7577-4322-b513-04f72404b70a}
State: [1] Stable
Last error: No error
Writer name: 'ASR Writer'
Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {6b17d670-9ea8-4ff1-a59e-b474f4b893db}
State: [1] Stable
Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {56aad1bf-9bf1-4fde-b2f4-a706577c632d}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {e942d09d-276e-450a-9bf4-b1d5abe6af8a}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {3737164b-61ac-454c-b1f7-42f2620f10db}
State: [1] Stable
Last error: No error
Writer name: 'DFS Replication service writer'
Writer Id: {2707761b-2324-473d-88eb-eb007a359533}
Writer Instance Id: {39458257-aca4-481e-a302-994f3eb1e9a3}
State: [1] Stable
Last error: No error
Writer name: 'Dhcp Jet Writer'
Writer Id: {be9ac81e-3619-421f-920f-4c6fea9e93ad}
Writer Instance Id: {6a8ab4aa-760c-4102-a27f-58f570c9c572}
State: [1] Stable
Last error: No error
Writer name: 'NTDS'
Writer Id: {b2014c9e-8711-4c5c-a5a9-3cf384484757}
Writer Instance Id: {53577013-8397-448e-9a25-c7cac08aa0a8}
State: [1] Stable
Last error: No error
Writer name: 'IIS Metabase Writer'
Writer Id: {59b1f0cf-90ef-465f-9609-6ca8b2938366}
Writer Instance Id: {ee2c9173-92e7-455c-8f73-601647c0ddb2}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {b1f60392-9dfd-4e3a-bda6-3dc2cb622ba4}
State: [1] Stable
Last error: No error
Writer name: 'IIS Config Writer'
Writer Id: {2a40fd15-dfca-4aa8-a654-1f8c654603f6}
Writer Instance Id: {a328aede-78f0-448e-9c36-e8379e9fe2a8}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {c39fa334-5c9d-4906-a3b5-33c3444948e6}
State: [1] Stable
Last error: No error
Writer name: 'NPS VSS Writer'
Writer Id: {35e81631-13e1-48db-97fc-d5bc721bb18a}
Writer Instance Id: {3c9c5584-b5fd-48cf-8541-0c8bfa585ca0}
State: [1] Stable
Last error: No error

How to substitute specific fonts on any page with corresponding fonts of my own choice?

How to substitute specific fonts on any page with corresponding fonts of my own choice?
I'm using Firefox 12 on Windows 7.
Examples on what I want to be able to do:
Change the font Arial on any page I visit, with Tahoma.
Change the font Georgia on any page I visit, with Droid Serif.
Change Arial Narrow on any page I visit, with Liberation Sans Narrow...
I used to have a plug-in which did that. It was called Font Replacer, but it doesn't have a version for Firefox 12 and its developer removed its page :(
I really can't stand to see specific fonts on my screen. I really hate the indifferent CAPITAL I from the small l. I can't stand to see the numerals with Georgia.

I opened a [https://support.mozilla.org/en-US/questions/926833 new discussion] as no one is interested to answer me here anymore.
Thanks.
So, now I find myself in a situation that I want exceptions for some rules. For example, I want to change the font Arial to Tahoma in all websites I visit, except for wikipedia.org, is that possible? Because I have a very long list of websites listed to change Arial to change to Tahoma, only because I don't want the rule to be applied to websites as wikipedia.org
I searched, but I'm unable to find something helpful :(

While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0"

Hi, While adding/Changing member in planning it gives the error "The SQL operation failed with an error code: 0" and not allowing any of the changes. I am not able to open the forms giving the error as "Fiscal Days Input - is invalid". Interestingly one form was opening, when the Page selection is changed it also started giving error as like "Fisacal Days Input(form name) - is invalid check log for details". Pls advice us that what is this error and how to resolve this. And Which log is to be referred for the details. Thanks Ravi

If a form is invalid it generally means that one of the dimension references is missing. Can you get in to edit the form? If you can, see if you can preview it. I suspect you will not be able to. If not, check all dimension boxes have at least one member against them. If you have multiple rows and/or columns check all of them too. I've had a couple of forms in dev "drop" a dimension reference but only once or twice so not enough to reproduce or find out what is causing it. Each time I got the "form invalid" error message and managed to fix it. Hope this helps.

What type of database operations effectd with Unicode and non unic

Hi Friends,
I want to know what type of database operations effects with Unicode and non Unicode Programing .
Thanks,
Ravi Kumar Mukkera

Hi ,
Check these links .
http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtoot/docs/library/uuid/ff99cb90-0201-0010-e389

Adobe Type 1 Font is not compatible with Windows 8 64bit?

I found that Adobe Type 1 fonts are not compatible with applications that run on Windows 8 64bit. When used, the appearance of fonts on the screen is not correct. Even worse, the font does not appear at all in the CorelDRAW X6. Strangely, when printed, the fonts were no problems. How can I make these fonts can be used in Windows 8 64bit? For additional information, these fonts appear normally when reviewed through the Windows Fonts folder, but does not display correctly when used in the application.

I believe I have a similar issue. I do have the latest Windows updates.
I'm on a new Win8 system, and I installed my Adobe type collection (bought years ago with ATM) by copying the .pfm and .pfb files to Windows\Fonts (there's no right-click > install for fonts on Win8 it seems; copying the font files to the font directory is what I've read as the install procedure.)
Windows then shows an error about .pfb incompatibility, so I selected "skip" for those files.
The result is that my fonts are installed and usable BUT this really screws up IE10 for certain websites. For example, I get blank pages for sites like wordpress.org and validator.w3.org. There doesn't seem to be any way to fix this other than doing a system restore to a point before the fonts were installed. Removing the font files from the Windows\Font directory doesn't help. I don't use IE10 with any regularity but I need it to work for testing purposes.
Is there a way to install these fonts? Is there a way to uninstall them (other than a system restore) if they affect IE10?
It's really hard to install on a one-by-one basis as need arises because I can't tell what the font names are from the file names. There's no application, like a type viewer, that will show me the fonts if I double click the file. (I just ran into this now... I need to use a Garamond type face but have no idea which one it is by looking at the .pfm and .pfb files.)
I would consider buying Font Folio if this is the answer but it's only available for a minimum of 5 licenses? I'm a freelancer and only need one licence.
Should I just use an online tool to convert my .pfm/.pfb files to an OpenType or similar format?
Thank you in advance!

Harsh fonts in Opera Menus with Fluxbox

Similar Messages

Maybe you are looking for