Harware Error code 4ROM/ 2/ 40000008: 0x84593e98

Hi,
I just ran a hardware test on my mpb 15inch early 2011 model running lion (10.7.1) and had the error code:
4ROM/ 2/ 40000008: 0x84593e98
Any idea what it could be? I've search online a bit and can't seem to find anything regarding this error code.
Thanks!

Yes, it's a hardware error associated with one of the ROM firmware chips. I suggest a trip to the repair shop is in order.

Similar Messages

I did a apple harware test i have an error code 4SNS/1/C0000008: TG)H- -124

i have an error code 4SNS/1/C0000008: TG)H- -124 What does it mean ?

I don't know, but it could be a sensor that controls a fan. There is also a sensor on the rear of the display that could also control one of the fans.

Harware test (extended) error codes

Hi,
I have an early 2007, 20", 2 GHZ iMac, a couple of days ago I ran the extended hardware test and got the two following error codes:
4SNS/1/40000000: TOOP and
4MOT/1/40000002: ODD
I did a bit of online research and found out that the first one supposedly is the sensor for the optical drive, I assume that it has to be replaced.
The second code I found relates to a fan, but I couldn't find out which fan.
Does anyone know if the first answer is right and maybe have the complete answer for the second code?
I would very much appreciate some help with this,
Thanks

Looks like a straightforward memory error to me, Jim.
Try using MemTest or Rember, rather than the TTD or AHT tests - see http://guides.macrumors.com/Testing_RAM
Sometimes simply re-seating your RAM will fix such things but usually it means a "bad" stick. If so, and your Mac is under warranty, and it is the original RAM, then Apple will replace it. If it is "third party", then check the manufacturer or vendor's warranties.
Cheers
Rod

NVidia error code 6 When zooming and panning a high res still image

I am consistantly getting the following error code which shuts down CS6. This is when zooming and panning a still images measuring something like 5300 pixels wide, and 4000 pixels high. I started by looking at the video driver, but nVidia says it is up to date. I am now wondering if the size of the still image is actually the problem? This is in a 1080 sequence.
Harware is GTX570
Any ideas?

Bill and Dennis.
Error Code 6 message - new challeng in the past 48 hours on very old premiere project.
My system - Win 7 64 byte serv pack 1, Ppro CS5.0.3, I7 processor, 12 g ram, nvidia gtx 470.
In the past 2 days, I am getting error code 6 from Nvidia on a logo that is keyed and 3d rolled on white background. The logo has been used without issue for many months in this same project and was encoded correctly by Adobe 1920 x 1280. Once this issue began, I had to render it 1-3 frames per request of project rendering last night. I imported the correctly encoded logo again to the project and it began to have the same issue again. I tried to change the harsh 3d rotations to see if it would relieve the processors overall. Nothing changed after it began to freeze up wtih the error message.
I saved, shut the PC down and left the system rest overnight.
This morning the project will get past the small load screen, but will not get past pulling the first file in the project once the editing screen loads. Prem Pro will launch correctly in all other projects this morning, but not this one. It gives me the same error message as it did when the problem started, but I can't even begin to touch the project. Message - "Hardware config doesn't meet min standards Error Code 6". I close the program, but then have to enter task manager to relaunch the program since it just hangs there.
My work around, when the project launched yesterday, was to render a much smaller amount of frames at a time which worked SLOWLY, but now I can't even access the program. Ouch. Backups are available from a few days ago, but I want to discover why this happened to avoid this issue for the future. Not much confidence at this point particularly when I rendered to match rez and deleted the media cache yesterday just in case the system was having to work around more cache than needed.
I have my computer hardware company looking into the issue, but I didn't take any known updates on the software in the past week. I thought this might be a thermal issue because we are having some challenges keeping our editing area cool enough, but that isn't the issue this morning because the other projects do launch correctly and the ambient temps are down. Thanks for any suggestions. I am a little slow to go out and see if there are any updates from Nvidia until I am out of options. I don't want to change the system scenario before I see if there are any other options.

Error codes galore. HELP PLEASE!

Hi there I recently re-installed all of OSX panther 10.3.7 then updated to 10.3.9. I did this becuase logic wasn't recording midi and figured if I went back to how it had always been it would make a difference. Big mistake. If I open my digidesign core audio manager first and then open logic pro 7.0.1 it gives me "error code - 1133 returned by DAE". If i just open logic pro 7.0.1 as you would normally I get a series of error messages:
1. "Critical Error registering with StreamManager ESB will not work properly blahblahblah"
2. "No audio harware found (-9025)"
3. Error code 25974
Interstingly Itunes works with my digi 002. Does anyone understand this? If you do could you shed some light on it for me
Cheers
Nicky

hi nicky. where do you live in australia?
G4 450DP Mac OS X (10.4.4) digidesign, motu, apogee

Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport. I've been using the passport for about a year now without any problems on older Macbooks in my house. I used to be able to read and write to this drive no problem. I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive. When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem. If I try to delete that folder I just created, I get this error:
The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
(Error code -36)
The folder has nothing in it whatsoever. I just created it. But if I go to Terminal and I run
rm -rf "untitled folder"
This works fine. Why is Terminal acting different than Finder? This does not happen on my other Macbooks. Thanks in advance.

Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

Report generation failed----error code:-17205; Access Denied.

Hi, All
    i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
    detail:
    An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility.
    error code:-17205; Access Denied.
    locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
    How to fix it?
    Thanks a lot.
BR

Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
CTA, CLA, MTFBWY

There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

Do a clean (re)install
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
From https://support.mozilla.com/en-US/questions/764376

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

Capturing oracle error codes into a variable

Hi
Can someone show me how it is possible to save an Oracle defined error code into a variable? What I am trying to do is when a stored procedure fails an Oracle error is raised, such as ORA-xxxx, then pass this code into variable to be saved into a log.
How do I achieve this?

user633278 wrote:
How do I achieve this?Function SQLCODE in PL/SQL exception handler returns error code. SQLERRM returns message:
SQL> declare
2      x number;
3 begin
4      x := 1/0;
5    exception
6      when others
7        then
8          dbms_output.put_line('Error code: ' || SQLCODE);
9          dbms_output.put_line('Error message: ' || SQLERRM);
10 end;
11 /
Error code: -1476
Error message: ORA-01476: divisor is equal to zero
PL/SQL procedure successfully completed.
SQL> SY.

Error Code:942 While Scheduling a report in BI Publisher

Hi All,
I am trying to schedule one report in BI Publisher.
After Clicking Submit Button while scheduling report,i get following error:
Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
Kindly Help me in resolving this issue
Regards
Amrita Singh

i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
I would recommend, you to install the scheduler in another schema or another db.
Re-installing the scheduler schema tables will fix this.

ORA-00600: internal error code, arguments: [ktsircinfo_num1]

While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

hi
read metalink ID - 153788.1
CHeers

Transport control program tp ended with error code 0212

Hi all,
I have created a two system landscape of development & production server. But while I am releasing any request from develpoment server a error is showing: " Transport control program tp ended with error code 0212 Errors: could not access file as supposed (see dev_tp or S".I have chosen development server as domain controller. TMS alert viewer error message also contains the following information------>command: TMS_MGR_READ_TRANSPORT_QUEUE
                                                                       service: transport service
                                                                       start : online
                                                                       Function: TMS_TP_SHOW_BUFFER
                                                                       message: TP_REPORTED_ERROR
In import monitor it's showing : "tp finished: could not access file as supposed (see dev_tp or SLOG1113.K"
Can you tell me how to resolve this issue?

dev_tp contains:
This is R3trans.exe version 6.14 (release 700 - 09.04.10 - 11:26:00).
unicode enabled version
usage: R3trans.exe [<options>] <control_file>
The control_file describes what R3trans has to do.
The following options are possible:
-c f1 f2 : Copy file f1 to f2 with character set conversion.
-d       : DB connect. Test if SAP database is available.
-i file : Import from file without using a control file.
-l file : List the contents of file to the log file.
-m file : List the contents of file to allow tp to create a cofile.
-t       : Test. All database changes are rolled back.
-t4      : Trace level 4. Switch on developer trace.
-u <int> : Unconditional modes. See below.
-v       : Verbose. Write more details to the log file.
-w file : Log file. The default log file is 'trans.log'.
-x       : DB connect without access on any SAP table.
R3trans.exe finished (0012).
& the slog file is not there in the trans/log directory

While activating a request in DSO getting error code 10

While activating a request in DSO getting error code 10
Hi All,
I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
I have checked the formula in Transformation and it works fine. Still I am not able to load data.
Please help.
Thanks and regards
Vishal Pardeshi

Check the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
Otherwise you can check the error from the monitor screen of the request in Details tab.
Veerendra.

Some data in ... could not be read or written. (Error code -36).

Hello.
I just got a Lacie 512mb disk, and thought it would be ideal for running my iTunes library off of. Got the disk, ran it through its paces, hooked it up to my Mac mini, and I can't seem to copy hardly any files over. Here's one error (but you can replace "iTunes Library" with any song and it's the same thing)...
'The Finder cannot complete the operation because some data in "iTunes Library" could not be read or written. (Error code -36).'
So, I think there's disk or file damage, etc. I boot off an external and run Disk Utility, DiskWarrior and TechToolPro against it - everything checks out fine.
But I can't copy files from the mini's internal to my external Repair Boot disk or the Lacie 512. Always that same -36.
So, at first I think it's the mini, then I think it's the Lacie, because it's new, so I reformat it: same issue. And that coupled with it won't copy to my Repair Boot, makes me think the mini again.
But, I've got a g1 iPod mini hooked up (formatted in hfsj+), and I can copy this file to the iPod mini, but no where else. I not sure what this makes me think.
And, I can duplicate the file on the Mac mini. In fact, if it's a song file that won't copy (none of them will), I can play it just fine.
Thanks.
Mac mini Mac OS X (10.4.3)

I experienced a problem in a familiar way.
After a recording session I tried to copy the complete folder with session and sound files to another disk (original and target disk both LaCie d2 250 FW800).
Somehow the proces stopped prompting an -36 error over some files.
When I look up these files in the Finder, it seems to have an iTunes audio-file icon instead of a ProTools audio-file icon (and so other standard app to open with). All the other files will copy fine. The files will play with quicktime in the preview window.
Any-one a solution?
Almost seems like some kind of copy protection, like implied earlier in this thread. I hope it's not. These are the originals...

Harware Error code 4ROM/ 2/ 40000008: 0x84593e98

Similar Messages

Maybe you are looking for