Has a release date been set for an update to iMovie 6?

The application is much faster than my old 3.0.3 version. Unfortunately it won't render. I seem to have the same problem with rendering that a number of folks have described on this board. Everthing turns white after rendering (Ken Burns and transitions)
What has apple's history been on the timing of the inevitable update?
G4 Mac OS X (10.4.4)
G4 Dual 450 Hz 1 GB memory Mac OS X (10.4.4)

Matt,
They are JPEG. They all were imported into iPhoto from an internal hard drive where I store my photos. I use that hard drive as a backup to my iPhotos.
My guess is I'll have to try one of the work-arounds mention on this board or wait until the new update and hope that works. I am hoping the update is out in weeks versus months.
tomw

Similar Messages

Hi, I forgot my user password mac 10.9.4 I don't need it to log in but i need it to make changes, etc. It says a password hasn't been set for this account but it still asks for one when i click on the lock icon. can anyone help me? thx!

Hi, I forgot my user password mac 10.9.4 I don't need it to log in but i need it to make changes, etc. It says a password hasn't been set for this account but it still asks for one when i click on the lock icon. can anyone help me? thx!

This is a little confusing since you say you have forgotten your password and then the system says you have not entered a password. Even with an Admin account you must have a password to install software.
If you are using Mac OS X 10.7 or above, you can change the admin password by restarting holding the Command and R keys, from the menu bar select Utilities, then Terminal. When the Terminal window opens, at the cursor type exactly:
resetpassword
and press Enter. When the Reset Password window opens, select the internal hard drive, and then the user account. Type a new password twice, leave the Hint blank, and then Save. Accept the next dialog that opens, and at the bottom of the Reset Password window agree to resetting the home directory permissions.
Quit the Reset Password window, go to the apple left side of the menu bar, Restart.
And you have a new password for your account.

Why has the "Job" movie been loading for the past 3 days? I have a 10Mb Uverse Internet connection.

Why has the "Job" movie been loading for the past 3 days? I have a 10Mb Uverse Internet connection.movie

It should not take more than 4 hr. Is there any indication it is making process? i.e. When you click on it to play do you get a message like "Will be avialable in 2hr 34 min"? Is that time changing? I would cancel the download. Restart ATV and then retry. If it goes more than 4hr then there is an issue.
As another option you can always download the movie to your computer and use the iTuens menus to play it from your computer under the Computers icon.

If your ipod is set for manual update, how do you add playlists?

If your ipod is set for manual update, how do you create and add playlists to the ipod?

Thanks! I have several ipod books and they told me about manually updating songs but not playlists. That tutorial is VERY helpful. I assume that if you manually update the playlist, all the songs contained in it would have had to been previously manually updated to the ipod....to say it another way, updating the playlist does not transfer any songs. Am I correct?

DATE FIELD SET TO NO UPDATE IN UPDATE RULES

DATE FIELD SET TO NO UPDATE IN UPDATE RULES :
hi friends,
i have a keyfigure(custom) of type date , but while creating the update rule it is automatically set to
no update and i have no option to change it ,
could any one suggest me how to handle this..
thaks,
raky.

Hi Rakesh,
select "source chracteristics" radio button and MAP the date field which you have in your infosource though the color will be gray after selecting the radio button but system will allow you to map that field (I mean do not care about gray color).
Hope this will help you.
Suneel

Anyone having same prob as me? I updated to 8.1.3 and lost photo stream - all settings are set for photostream updating - the blue shirts at the Apple store seem to think that the feature was removed with the 8.1.3 update

Is anyone having same prob as me? I updated to 8.3 and lost photo stream on my photos - all my settings are set for photostream updating - the blue shirts at the Apple store seem to think that the feature was removed from the phones with the 8.1.3 update but it is not mentioned anywhere on Apple's site

found it
http://gimutaowebsolution.com/missing-photos-on-ios-8-3-or-8-x/

Has an actual date been released for the iPad 3 Siri, or is it still in the vague season known as "fall"?

I'm looking to buy an iPad, however I am just wondering if there is a set release date for the iPad 3 + Siri. I'd really prefer not to buy an iPad and then find out a week later that there as been a new iPad + Siri release! Thanks.

emma_may wrote:
I'd really prefer not to buy an iPad and then find out a week later that there as been a new iPad + Siri release! Thanks.
Apples Software Update process is easy enough to do if you were to buy an iPad with iOS 5.1.1 (current) and upgrade to iOS 6.0 when it is released.
http://www.apple.com/ios/ios6/

How do I change the email adress that has been set for when I forget my security questions?

I have forgotten my security questions, and the email adress that is set for when this happens, is wrong. So how can I change it??

You won't be able to change your rescue email address until you can answer your questions, you will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to update your rescue email address for potential future use : http://support.apple.com/kb/HT5312

Delivery Date not Set for Production Orders

Hi,
I am trying to settle a MTS (make to stock) production order that is both CNF and DLV. When I try to calculate variances, I get a KV 239 message stating that the delivery date is not set. I set this order to TECO and went to recalculate WIP but the production order cannot settle because this error still remains. When I drill down on the error, it states that there was an error in the program which set this order to DLV status, when no delivery date has been set. I can't see where this is looking for the delivery date. Has anyone come across this issue and if so, how would I go about correcting this?
Thanks!

Sorry, posted in the wrong forum.

ANNA has a release date with vodaphone australia

UPDATE: October 26, 2011
Technical acceptance for the Symbian Anna update has been granted for the C7, E7 and N8. Nokia has scheduled the update to be available late afternoon on Monday 31st October.
http://blog.vodafone.com.au/blog/nokia-symbian-anna-software-update/

andrewaussie wrote:
i knew new info was coming to vodafail today because they do it fortnightly on wednesdays. i'll tell you what. vodafail are cutting it close being the last day of october.. im expecting an update from telstra tomorrow. because they make there page updates on thursday. lets see if telstra give us some good news..
make that friday i got my dates wrong

Release date and time for Purchase order

Hi Masters,
Could you please let me know that in which table the release date ane time will get stored for purchase order.
Regards,
Panneer

Hi,
You can find out from CDHDR & CDPOS table.
Select Date Time from CDHDR table & Join with CDPOS table where CDHDR-OBJECTCLAS = EINKBELEG and CDHDR-OBJECTID = PO number and CDPOS-TABNAME = 'EKKO' and CDPOS-FNAME = FRGZU and CDPOS-VALUE_NEW = 'X'.
You will get the date time from CDHDR table.
Regards,
Udayasankar Rajagopalan

Release Date in Future for PR

When MRP is run for MIN MAX Items the Release date in the PR shows the future date
suppose if PR is created thru MRP today its release date is shown in future some 2-3 days in future.
the release date shub be same when PR is created for Min Max items when MRP is run.
why it is so ????

Hi ABhishek
Release date is the date on which procurement should have started acting on the PR i.e by this date PR should be released (approved) and handed over to purchasing dept for necessary action. It is based on the lead times of the material and delivery date.
The F1 help for this field is very good. Pl go through it once.
Example:
Date required:                     01.Oct.96
GR processing time:                 2 days (working days)
Planned delivery time:             10 days (calendar days)
Purchasing dept processing time:    2 days (working days)
For the material to be available on the date it is needed, the purchase requisition must be released on 11.Sept.96 (requirement date less GR processing time, planned delivery time, and purchasing department processing time).
Best regards
Ramki

Data point sets for the interpolate 1D array vi

The HELP info for Interpolate 1D Array states that you can input an array of numbers OR POINTS. What format would you input points, or "data point sets" as the help states?

Hi etd,
see the attached example. One works with an array and the other one with array of cluster, like described in the help. Hope it helps.
Mike
Attachments:
Interpolation_Example_LV71.vi ‏35 KB

BPF dont open the data region set for Excel Template

Hi experts, i have a BPF which contain a step where i put in the entity dimension a current view type "inherit from data region". This dimension have a security "READ ONLY". Well when i open this BPF, with a user (who is OWNER in the Entity dimension for specific member) the template open on diferent member than it assigned.
I set in the member access profile for this user just the member i want to he see and also set the other members "denied", however it`s still open in the member which open for default in the action pane on BPC WEB.
What i have to do to correct that?
thanks in advance

Hi,
"Inherit from Data Region" means - when you open the BPF, you need to specify members for few of the dimensions. These members can be used by specifying "inherit from data region".
For example, if, while opening the BPF, you enter USA for Entity and 2009.Total for Time. If "inherit from data region" is specified for entity dimension, then it will take USA, irrespective of the current view and the fact that the user is owner of some other dimension.
In this case, either you can take it from CV or you can specify the member explicitly while designing the BPF. However, it will not serve your purpose.
When you acces read access to the user for some entity, the user can still view the data. However, he wont be able to send data. So, restricting the view access is not possible in this case.
Hoep this helps.

Please Let us know release date in India for XPERIA T

Hi,
Can i know the information about Sony xperia T release date in India??
Regards
Arun

It doesn't seem that this phone was ever released
http://www.sonymobile.com/in/products/phones/#expanded
I hardly doubt that it will be released since there are a lot new Xperias being released or about to as we speak
but you should contact your local Sony
http://www.sonymobile.com/global-en/support/contact-us/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Has a release date been set for an update to iMovie 6?

Similar Messages

Maybe you are looking for