Has a stylus-related implement been made for the iPad 2 yet?

Just wondering if a stylus of sorts has been made for the iPad yet?

There are a number available - just do a search on somewhere like Amazon for 'iPad stylus'. Or you could search this forum for recommendations

Similar Messages

Can I use the AC adapter made for the iPad with my iPod Video (5th Generation)?

I have a choice of using the original adapter or the newer adapter made for the Ipad. The original is rated at 5 volts @ 1 amp output. The newer (iPad) adapter is rated at 5.1 volts @ 2 amps output. I tried to recharge the battery and it worked, but the recharge time from a dead battery was around 6 hours. The difference of the voltage is neglegible, but the ampere rating shouldn't hurt the iPod as it only draws as much current (amps) as needed. Having said this I thought that the recharge time would be less...apparently not. I just do not want to damage the iPod. The iPad charger does not get as warm as the original while charging.
Any help is most appreciated. Mike (Phillipsburg, Missouri, U.S.A.)

I've been using my iPad charger to charge my iPhone for over a year. I haven't had any issues. But I can't promise you that your experience would be the same.

Has an actual date been released for the iPad 3 Siri, or is it still in the vague season known as "fall"?

I'm looking to buy an iPad, however I am just wondering if there is a set release date for the iPad 3 + Siri. I'd really prefer not to buy an iPad and then find out a week later that there as been a new iPad + Siri release! Thanks.

emma_may wrote:
I'd really prefer not to buy an iPad and then find out a week later that there as been a new iPad + Siri release! Thanks.
Apples Software Update process is easy enough to do if you were to buy an iPad with iOS 5.1.1 (current) and upgrade to iOS 6.0 when it is released.
http://www.apple.com/ios/ios6/

Why has no patch been made for the January update?

After that December/January update my phone began DRAINING my battery. My WIFI connection is horrible even when I am sitting next to my router. The phone just powers off on it's own, my touch screen is horrible.....
All these issues have been commented on by bloggers, magazines, websites, yet Verizon has not fized the issue.
Has anyone heard about a patch for this?

Danni111972,
I want to make sure that you are having a good working device. There is no info on if there is an update for the issues that you are having. Have you been able to back up the device and perform a factory reset since the update come into the phone? Please keep us posted.
Kevin_R
Please follow us on Twitter @VZWSupport

HT201472 is it possible to track an ipad through seeing what purchases have been made on the ipad using the serial number?

Does anyone know if there's a way to track an ipad that has been stolen other than the methods already commonly used. For example is it possible to somehow use the ipads serial number in order to see any payments made on that specific device or for the device?

Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

Will software made for the iPad work on an iMac?

I wanted to purchase the new Madden12' game; it comes in iPhone/iPad formats. I was wondering if these applications would work with an iMac or Airbook?
Thanks for taking time to respond

No, sorry. Apps for the Mac run on the Mac OS X while apps for the iPhone or iPad run on the iOS.
Two different operating systems.

I don't understand the thing you call live bookmarks never used it, and most forums I have used notify VIA E-mail not giving out my E-mail address information when a reply has been made to the thread in question.

So how do I get notified of updates in this forum? As I said: I don't understand the thing you call LIVE BOOKMARKS I have never used them, and most forums I have used notify VIA E-mail not giving out my E-mail address, or other private information when a reply has been made to the thread in question, so how do I get notified of updates in this forum? I have seen no normal options for setting my viewing preferences used for this forum. Thank You.

Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

Microsoft Word Has Not Been Installed for the Current User

Hi, everybody
I'm just starting our attempt to put together ZfD app packages for MS Office 2007. I've tried 2 different route with poor results for each. I'm looking for guidance and suggestions and, hey really, the simple final solution. :)
Objectives: Each app package will install locally one of the Office apps (e.g., Word) if it is not installed and then launch it, otherwise it will launch it. It gets installed locally to the C: drive using all the MS default choices, but runs from the desktop ZEN/NAL shortcut. All desktops are XP, not Vista or W7.
Routes tried and failed...
1) Simple app, uses distribution and run scripts to figure out if already installed, then installs using network shared drive and config.xml file for just the one app. The result ought to work -- no particular error in the package, those are fixed -- but what happens is something different each time with the MS setup.exe, and it never does complete without its own error (various and different each time). So, this appears to be completely unreliable because launching MS's setup.exe from a simple app is unpredictable and incomplete.
2) Snapshot of a successful setup.exe and config.xml install. This ALMOST works... well it does in fact work but the snapshotted app gives an error once it finishes launching -- "Microsoft Word Has Not Been Installed for the Current User" -- and exits. From the research I've done on this message, the MS program sees the "wrong" Windows profile on the destination environment, compared to that in the snapshot, and figures it's now been installed from a bootleg copy of Office 2007.
At this stage all I can think of is expletives. We've paid for everything, I've followed all the usual and customary steps, played by the rules, been polite (and also used the necessary computer swear words), and now I just want to insult everyone in Microsoft's marketing department for ruining everyone's life yet again. Can't we just do this, is it too much to ask!?!
Please help me. What is really going to work for distributing and maintaining Office 2007 apps using our ZfD environment? ALL USEFUL SUGGESTIONS WELCOME. Thank you. Bless you.
-Kent S.
Be strong as a ship and wise as a whale

These questions are really best in the Microsoft Office Forums.
These are MS Office Questions not ZEN Questions.
Novell did not design Microsoft's Office Install.
I have nothing against snapshots, but it does not work great with the Office
installs, which you yourself know since you are posting here with problems
based on that.
And your other method you are trying with the break out is not working well.
We also know that from experience.
We can tell you that the way most people install it and the way most people
succeed doing it, is by doing it the way recommended and designed by
Microsoft.
ZEN does that just fine.
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"KentFSmith" <[email protected]> wrote in message
news:[email protected]...
>
> Thank you, Grimlock (-Grimlock?-)
>
> Through a google search I encountered a very close suggestion, and the
> poster said they couldn't remember the name of a MS utility but that
> there was one that would break out the individual MSIs from the Office
> 2007 setup.exe bundle. The dependent app appears to be a simple and
> possibly elegant solution, but without a good way to break out the MSIs
> I don't see how to do anything other than with a config.xml ('Config.xml
> file in the 2007 Office system'
> (http://technet.microsoft.com/en-us/l.../cc179195.aspx)).
>
> Do you know of that utility and where I can find it?
>
> There is a lot of history here now of just doing the individual
> applications. Everyone gets Word and Excel, but much fewer get
> PowerPoint and Access. All other reasons aside, a compelling one is the
> reduced number of help calls to the Help Desk here. Occasionally we
> also just run the whole Office install for someone who needs some of the
> odd utilities, but that is easily cost-justifiable for us to break them
> out as exceptions. Otherwise, we focus 90% of our support on just Word
> and Excel and it pays off nicely.
>
> If we switch to putting full Office 2007 on all PCs then there may be a
> better approach that include other tools than ZfD, such as the fact that
> we replace 1/3 of all PCs in the organization each year (so that no
> hardware is more than 3 years "behind"). We could put 1/3 of all Office
> 2007 installs into the new PC image. But we still need to support all
> the use of the apps after the install, so ZfD MUST work well, it simply
> MUST work well or we're screwed, to use the vernacular. Also, just
> switching from what we've been doing for years -- single app orientation
> -- means introducing new-ish issues that have to discover and explain to
> our comrades, and to adjust our orientation with unknown future costs.
>
> But that may end up being the simplest adequate solution. And that's
> what I want.
>
> -K
>
> grimlock;1883526 Wrote:
>> Craig Wilson wrote:
>> > You should really focus on #1.
>> > Snapshot is not the way to go.
>> >
>> > Details about what is Not working or what random behavior may help
>> folks.
>> > Ask in the MS forums may help too. dont' mention zenworks.
>> > Just say you are installing as Administrator from a share and getting
>> these
>> > errors.
>> >
>> > While not 100% accurate, it should be good enough to get some good
>> feedback.
>> >
>>
>> Nor is installing 1 app at a time. Install the whole suite, have an
>> icon for each app that runs the exe for that app with a dependency on
>> the another app that points to the installer msi.
>>
>> If any user runs any app, it will run if the executable is there
>> (meaning it's been installed). If the executable is not there then it
>> calls the dependent application (the installer app) and installs it,
>> and
>> then runs it.
>
>
> --
> KentFSmith
> ------------------------------------------------------------------------
> KentFSmith's Profile: http://forums.novell.com/member.php?userid=2927
> View this thread: http://forums.novell.com/showthread.php?t=391573
>
>

MDW Disk Usage for Database Report Error - A data source has not been supplied for the data source DS_TraceEvents

Hello,
On the MDW Disk Usage Collection Set report, I get the following error when I click on a database hyperlink.
A data source has not been supplied for the data source DS_TraceEvents
SQL profiler shows the following SQL statements are executed (I've replaced the database name with databaseX)
1. exec sp_executesql N'SELECT
dtb.name AS [Name]
FROM
master.sys.databases AS dtb
WHERE
(dtb.name=@_msparam_0)',N'@_msparam_0 nvarchar(4000)',@_msparam_0=N'databaseX'
this returns zero rows as databaseX does not exist on my MDW central server, but is a database on a target server (i.e. one that is being monitored and uploaded into the MDW central server).
2. USE [datatbaseX]
this produces the following error:
Msg 911, Level 16, State 1, Line 1
Database 'databaseX' does not exist. Make sure that the name is entered correctly.
why is the report looking for the database on my server?
thanks
Jag
Environment: MDW (Management Data Warehouse) on SQL 2008 R2

Hi Jag,
Based on my test, while this database is offline, we will encounter this issue. This is because that while we click the certain database in “Disk Usage Collection
Set” report, it will query some information with that certain database. If this database is offline, we will not access this database to acquire related information and generates this error.
Therefore I recommend that you check the status of this database by using this system view:
sys.databases. If it is not online, please execute
the following statements in a new window to make this database to be online:
USE master
GO
ALTER DATABASE <database name> SET ONLINE
GO
If anything is unclear, please let me know.
Regards,
Tom Li

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

I'm getting the error message "Photos folder syncing has been disabled for the iPhone my iPhone because the folder "Pictures" cannot be found."

I'm getting the error message "Photos folder syncing has been disabled for the iPhone <my iPhone> because the folder "Pictures" cannot be found." lately.
Normally, all I do with photos is move them from my iPhone to my computer's (Windows 7) hard drive. I do this by connecting the iPhone with the cable, a box pops up on the screen asking me what I want to do, and I choose "Import pictures and videos". I've previously selected the "delete photos from the device after move" option (or however it's worded...), simply because I don't want this device to fill up with photos.
Lately, it has been importing the photos fine, but it won't delete them from the iPhone. This used to work just fine, now it doesn't work and I don't know what changed, if anything. In iTunes, I get the error message I list at the beginning of this message.
How do I fix this?

Hi there scarbo59,
You mentioned that you are still able to import without issues, but you may still want to run through the troubleshooting steps outlined in the article below.
iOS: Unable to import photos to computer
-Griff W.

Having an issue with itunes purchase, message shows "could not complete itunes store request, requested resource not found." My account has been debited for the price of the download, but I dont have the download.

Need some help, I was downloading an album when the message "could not complete itunes store request, requested resource not found." "Error in the itunes store please try again later." My account has been deducted for the amount of the album, but I dont have it downloaded on my computer. Please help!!! Thank you!!!

Does the purchases show in your Purchased list?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.
Next contact iTunes by:
Contact iTunes

Songs purchased through iTunes on iPhone 4 get download error and will not load. Account has been charged for the purchase.

I purchased an album through iTunes on my iPhone 4, and my PayPal account has been charged for the entire album. However, all but 2 songs would download to my phone. The other 2 have a download error. Any suggestions on how to fix the error, or to get a refund for the songs that I can't get?

I purchased an album through iTunes on my iPhone 4, and my PayPal account has been charged for the entire album. However, all but 2 songs would download to my phone. The other 2 have a download error. Any suggestions on how to fix the error, or to get a refund for the songs that I can't get?

HT4009 I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases.

I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases. I also have an email receipt with the purchase. Can you please tell me how to resolve this issue?

iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4919

An Invalid Setup has been detected for the current Transaction Type in AME

Gurus,
I am constantly getting an error An Invalid Setup has been detected for the current Transaction Type in Approvals Management
My client have 3 units say A,B,C. A requirement is such that whenever a vacancy is created, an approval should be sought from units HR manager.
I have created a dynamic query for this and it is working fine for first two units say A & B. i.e. whenever somebody from unit A or B creates a vacancy it is correctly fetching the
respective units managers. But, this whole AME is not working for unit C. An error pops out which says *An Invalid Setup has been detected for the current Transaction Type in
Approvals Management* . Can anybody tell me what can be the issue?
Edited by: 919527 on Aug 8, 2012 12:40 AM
Edited by: 919527 on Aug 8, 2012 12:41 AM

Solved it. The cursor wsa fetching two rows in plcae of one.

Has a stylus-related implement been made for the iPad 2 yet?

Similar Messages

Maybe you are looking for