Has Adobe given you the option to enlarge the font for Tags, dates, etc. in PSE 11?

Has Adobe given you the option to enlarge the font in PSE 11 such as tags, dates etc. This was asked befor but not answered

Not sure what your question is about but if you are talking about display fonts for Menus and general user interface in PSE 11 then I would think it is to do with the display configurations in your operating system. In Windows, you can go to the Control Panel and look for Display properties. In Windows XP it might look something like this:
Look at he yellow box to change the font size.
Hope this helps.

Similar Messages

Why has adobe acrobat changed the dimensions of my original jpeg file?

Why has adobe acrobat changed the dimensions of my original jpeg file? I uploaded an A3 jpeg file and adobe converted it to pdf but the scale is all wrong. Why is this? What can I do about it?

Normally if you open a graphic in Acrobat, it automatically adjusts the PDF to the size of the graphic. It sounds as though you are doing something else to create a PDF. It would help to know how you created the PDF, you seem to be suggesting you did it with an online tool and not Acrobat. In that case you should go to the appropriate product forum.

I need the IP values and Subnet Mask which is given by the ISP for my jetpack so i can configure my smart tv

i need the IP values and Subnet Mask which is given by the ISP for my jetpack so i can configure my smart tv

Your public IP Address is provided by the ISP. Your smart TV does not need to know this information unless you plan to host some kind of an application or service for folks on the internet through your TV. It wouldn't work anyways since all Jetpacks sit behind a VZW NAT firewall and blocks hosting capabilities by default.
What you more than likely are referring to is the Default Gateway and Subnet mask of the Local Area Network being hosted by your Jetpack. By default these values should be something like 192.168.1.1 and 255.255.255.0. You can confirm the DG and SM by connecting a computer to the Jetpack. Every computer has a way to look up the networking information. On a Windows OS you would open up a CMD window and type in "IPCONFIG".
If you shoot us the model number of your Smart TV we may be able to look up a User Guide to confirm what kind of info is needed to connect to a wireless network. Most of the time exchanging the IP information is done automatically during the connection process. It would also be nice to know which Jetpack model you have so we can compare the User Guide for that device with your TV.

HT5648 OS10.6.8 Firefox 24.0 The new Yahoo mail shows no graphics. However, the new Yahoo mail displays correctly in Safari and Chrome. I believe this has to to with the settings for Javascript. Help me, please.

OS10.6.8, Firefox 24.0
The new Yahoo mail shows no graphics using Firefox 24.0 - just identical rectangles where new icons should be.\. However, the new Yahoo mail displays correctly in Safari and Chrome. I believe this has to to with the settings for Javascript. Those settings aren.t easy to access in the most recent Firefox 24.0 version. Help me, please.

The settings for Javascript are either on or off, Fireefox 24 doesn't give you a option to turn off Javascript, unless you installed something like NoScript extension (or some other Javascipt blocking add-on)
If NoScript, then you need to use the View > Toolbars > Customize and drag the NoScript "Temp Allow All" button to the toolbar area to enable all enabled scripts (including Javascript) on that web page.
Under the Firefox Help menu is a option to restart with add-ons disabled to see if something you might have installed is causing your problem.
Reinstall Firefox or create another user account and run Firefox there to try to localize your issue.
I'm having no problem here on 10.6.8 in Firefox, Chrome or Safari, Yahoo Mail works perfectly.

I've tried to install Adobe Reader on my mom's computer, and after doing so, absolutely EVERYTHING on her computer turned into an Adobe file, including the shortcuts for Firefox. Is there a reason/fix for this?

I've tried to install Adobe Reader on my mom's computer, and after doing so, absolutely EVERYTHING on her computer turned into an Adobe file, including the shortcuts for Firefox. Is there a reason/fix for this?

You'll want to read this: Application, file icons change to Acrobat/Reader icon

SQL ENTERPRISE: The edition of Reporting Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database

The error below makes absolutely no sense! I'm using Enterprise Core...yet I'm being told I can't use remote data sources:
w3wp!library!8!03/05/2015-19:08:48:: i INFO: Catalog SQL Server Edition = EnterpriseCore
w3wp!library!8!03/05/2015-19:08:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: , Microsoft.ReportingServices.Diagnostics.Utilities.OperationNotSupportedException: The feature: "The edition of Reporting
Services that you are using requires that you use local SQL Server relational databases for report data sources and the report server database." is not supported in this edition of Reporting Services.;
Really? This totally contradicts the documentation found here:
https://msdn.microsoft.com/en-us/library/ms157285(v=sql.110).aspx
That article says remote connections are completely supported.
ARGH! Why does this have to be so difficult to setup?!?

Hi jeffoliver1000,
According to your description, you are using Enterprise Core edition and you are prompted that you can’t use remote data sources.
In your scenario, we neither ignore your point nor be doubt with what you say. But actually we have met the case before that even though the SQL Server engine is Enterprise but the reporting services is still standard. So I would recommend you to find the
actual edition of reporting services you are using. You can find Reporting Services starting SKU in the Reporting Service logs ( default location: C:\Program Files\Microsoft SQL Server\<instance name>\Reporting Services\LogFiles). For more information,
please refer to the similar thread below:
https://social.technet.microsoft.com/Forums/en-US/f98c2f3e-1a30-4993-ab41-acbc5014f92e/data-driven-subscription-button-not-displayed?forum=sqlreportingservices
By the way, have you installed the other SQL Server edition before?
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Can you increase the fonts for your iphone 5s

I can increase the fonts for my email and texts but can you increase the fonts for everything on your iphone, example apps

If by "for the Apps" you mean the app labels? No. But you might try experimenting with Accessibility settings to see if you can acheive something that will help. As for the size of text within an app, that would depend on whether the app provides that configuration setting.

Hello i have a problem i can not use adobe programs. The payment for the month march is not be payed, but i will pay the payment.I can not found where i can do that. Also i see that my membership is stopped.

Hello i have a problem i can not use adobe programs.
The payment for the month march is not be payed, but i will pay the payment.I can not found where i can do that. Also i see that my membership is stopped.

Try the not-charging topic of:
iPod touch: Hardware troubleshooting
It could be that the battery is dead.

Is there any way to enlarge the font for the panels in Bridge?

Is there any way to enlarge the font for the panels in Bridge? Either CC or CS6?

To change the default message font, use UIManager: UIManager.put("OptionPane.messageFont",
new Font("Lucida Console", Font.PLAIN, 12)); Per-instance, use HTML: JOptionPane.showMessageDialog(
"<html><font face='Lucida Console'>Your message here</font></html>");

[Solved]urxvt does not search the font for emojis while gnome-terminal

Hi, I'm using urxvt and am having some problems setting up fonts. These are my URxvt parameters specifying the fonts
URxvt*font: xft:Inconsolata-dz for Powerline:style=Semibold:pixelsize=14:antialias=true:hinting=slight, \
xft:PowerlineSymbols:pixelsize=14:antialias=true:hinting=slight, \
xft:Symbola:pixelsize=14:antialias=true:hinting=slight
Now, the emojis from Symbola does not appear and it only appears as a box
The same thing when opened in Gnome-terminal properly displays the emojis
Also, I have tried starting urxvt with the following options
urxvt -fn "xft:Symbola"
and it works but as you see Symbola is not a font for your terminal.
What am I doing wrong here? I've check my previous lines and it is right. Do you guys have any ideas? Much appreciated. I have also tried with other posts stating that Urxvt cannot display symbols properly and have tried them all. If I've missed any please let me know. The strange thing is that it works for Gnome-terminal and Urxvt with only Symbola fonts
Last edited by decryptedepsilon (2014-07-12 02:40:24)

bch24 wrote:
Make sure the System Locale is set to utf-8 locale.
This sometimes is the issue.
Many thanks for your reply, I've checked the system locale is proper. I think I have found the solution.
I think the official rxvt-unicode faq and documentation here states that rxvt-unicode drops pixels while showing some fonts because different fonts use different height and width. In this particular case, Symbola font is too wide and the default letterSpace does not allow it to display correct. If -letsp parameter is set to 4, it is displaying but with about a half pixel missing
The specific parameters for .Xresources
URxvt*font: xft:Inconsolata-dz for Powerline,xft:Symbola
URxvt*letterSpace: 4
And this gives this which technically solves the issue
The documentation clearly states the following
All of this requires that fonts do not lie about character sizes, however: Xft fonts often draw glyphs larger than their acclaimed bounding box, and rxvt-unicode has no way of detecting this (the correct way is to ask for the character bounding box, which unfortunately is wrong in these cases).
I guess the first thing one should do is to check the documentation thoroughly of the official project page rather than searching countless forums where people have discussed stuff based on trial and error. I guess that's a classic rookie mistake and I feel very good that I'm moving past the rookie phase

What are the settings for apn data and mms for iphone 4 on straight talk?

what are the settings for cellular data network APN DATA and MMS for Straighttalk sims on IPhone 4?I cant send or recieve pictures.My service keeps losin signal constantly saying no service then 1 bar,2 bars,3 bars...then back down to no service.It drops calls.Iv been trying to find out the answer to this problem for 2 weeks!I have no Profile selection in my settings either to do wat its showing online on one website.and have entered numerous diffrent APNs and none have worked!!!!PLEASE HELP!!!

They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related.

The table for storing data for infocube and ODS

Hi all:
could you please tell me how to find the table for storing data for infocube and ODS?
thank you very much!

Hi Jingying Sony,
To find tables for any infoprvider go to SE11.
In database table field enter the following
Cube -
Has fact table and dimension table
For customized cube - ie cube names not starting with ' 0 '
Uncompressed Fact table - /BIC/F<infocubename>
Compressed fact table - /BIC/E<infocubename>
Dimension table - /BIC/D<infocubename>
For standard cube - ie cube names starting with ' 0 '
Uncompressed Fact table - /BI0/F<infocubename>
Compressed fact table - /BI0/E<infocubename>
Dimension table - /BI0/D<infocubename>
Click on display.
For DSO,
For standard DSO active table- /BI0/A<DSO name>00.
You use 40 for new table.
Click on display.
For customized DSO use- /BIC/A<DSO name>00.
An easier way is in the database table field, write the name of the cube/DSO preceeded and followed by ' * ' sign. Then press F4 . It shall give you the names of the available table for that info provider.
Double click on the name and choose display.
Hope this helps,
Best regards,
Sunmit.

Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view

Unable to view external webcam content. I'm using IE11 with Windows 7 64 bit. I've tried deactivating Activex control, tried different browsers etc, tweeked the tools for trusted sites etc, but am totally stuck. I know the cams are working as i can view them on mobile phone via puffin browser. I can play Youtube videos etc just fine. So why not the webcam?

First, confirm that ActiveX Filtering is configured to allow Flash content:
https://forums.adobe.com/thread/867968
Internet Explorer 11 introduces a number of changes both to how the browser identifies itself to remote web servers, and to how it processes JavaScript intended to target behaviors specific to Internet Explorer. Unfortunately, this means that content on some sites will be broken until the content provider changes their site to conform to the new development approach required by modern versions of IE.
You can try to work around these issues by using Compatibility View:
http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-11
If that is too inconvenient, using Google Chrome may be a preferable alternative.

The font for my yahoo log in is very very small anbd my email fonts are far too big and the words overlap, please help to correct this problem

The font for sign into my yahoo mail is so small that I am unable to make out my ID and password and when I do get into my mailbox, the fonts are far too big and the words overlap. Tried going into tools /options to make changes but not successful, please help.thanks

Reset the page zoom on pages that cause problems, make sure that the window is not maximized:
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have increased the minimum font size then try the default setting "none" as a high value can cause such issues.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
You can use an extension to set a default font size and page zoom on web pages.
*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

How do I find the font for a specific character in a textItem?

I'm writing a script that builds a font list for an open document. While I could have lookup the fonts for the file as a whole, my goal is to iterate over specific layerSets to build a font list from. The issue I'm facing, is that referencing:
app.fonts[text[n].textItem.font].name
Only pulls the font name of the first character of the textItem. I need to get the names of all the fonts in the textItem, and while I can successfully loop through each of the letters, they do not have the character attributes associated with them.
I tried this: app.fonts[text[n].textItem.contents.font].name
As well as many iterations of a similar idea, and I cannot get it to pull the font name, as it's not an attribute of each character. I apologize if this is a remedial question, but I'm a bit of a novice with javascript in Adobe programs.
For an example of what I'm trying to acheive, I was easily able to do this in illustrator, by using the following statement:
fontName = text.characters[j].characterAttributes.textFont.name;
When placed in a loop, this goes through each font in the text Layer.

This should get a list of the fonts used in Type Layers in the selected Group.
// get list of fonts used in the active group;
// based on code by paul riggott;
// 2014, use it at your own risk;
#target "photoshop-70.032"
if (app.documents.length > 0) {
var theFonts = main ();
alert ("the fonts used in the folder " + activeDocument.activeLayer.name + " are"+"\n"+theFonts.join("\n"))
function main () {
var theFonts = new Array;
var someLayerStuff = getActiveLayerIIndex();
if (someLayerStuff[1] != "layerSectionStart") {return []};
var aNumber = 0;
// get number of layers;
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
var applicationDesc = executeActionGet(ref);
var theNumber = applicationDesc.getInteger(stringIDToTypeID("numberOfLayers"));
// determine the start index;
if (activeDocument.layers[activeDocument.layers.length - 1].isBackgroundLayer == true) {var theStart = someLayerStuff[0] - 2}
else {var theStart = someLayerStuff[0] - 1};
for (var p = theStart; p >= 0; p--) {
try {
var ref = new ActionReference();
ref.putIndex( charIDToTypeID( "Lyr " ), p);
var layerDesc = executeActionGet(ref);
var layerSet = typeIDToStringID(layerDesc.getEnumerationValue(stringIDToTypeID("layerSection")));
var isBackground = layerDesc.getBoolean(stringIDToTypeID("background"));
var theName = layerDesc.getString(stringIDToTypeID('name'));
// check if group closes;
if (layerSet == "layerSectionStart") {aNumber++};
if (layerSet == "layerSectionEnd" && aNumber == 0) {return theFonts};
if (layerSet == "layerSectionEnd" && aNumber != 0) {aNumber--};
// if not layer group collect values;
if (layerSet != "layerSectionEnd" && layerSet != "layerSectionStart" && isBackground != true) {
var hasText = layerDesc.hasKey(stringIDToTypeID("textKey"));
if (hasText == true) {
var textDesc = layerDesc.getObjectValue(stringIDToTypeID('textKey'));
var paragraphStyle = textDesc.getList(stringIDToTypeID('paragraphStyleRange'));
var kernRange = textDesc.getList(stringIDToTypeID('kerningRange'));
var rangeList = textDesc.getList(stringIDToTypeID('textStyleRange'));
for (var o = 0; o < rangeList.count; o++) {
var styleDesc = rangeList.getObjectValue(o).getObjectValue(stringIDToTypeID('textStyle'));
var aFont = styleDesc.getString(stringIDToTypeID('fontPostScriptName'));
// add to array;
var theCheck = true;
for (var n = 0; n < theFonts.length; n++) {
if (theFonts[n] == aFont) {theCheck = false}
if (theCheck == true) {theFonts.push(aFont)}
catch (e) {};
return theFonts
////// get some stuff from the active layer //////
function getActiveLayerIIndex () {
var ref = new ActionReference();
ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
var layerDesc = executeActionGet(ref);
var theIndex = layerDesc.getInteger(stringIDToTypeID("itemIndex"));
var theSection = typeIDToStringID(layerDesc.getEnumerationValue(stringIDToTypeID("layerSection")));
var hasText = layerDesc.hasKey(stringIDToTypeID("textKey"));
return [theIndex, theSection, hasText]

Has Adobe given you the option to enlarge the font for Tags, dates, etc. in PSE 11?

Similar Messages

Maybe you are looking for